Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys

Liu Kun et Chen X-Grant. (2015). Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys. Metallurgical and Materials Transactions B,

[thumbnail of revised-Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys.docx] Microsoft Word 2007+ (.docx)
96kB
[thumbnail of Figures] Microsoft Word 2007+ (.docx) (Figures)
40MB
[thumbnail of Tables] Microsoft Word 2007+ (.docx) (Tables)
22kB
[thumbnail of revised-Evolution of intermetallics%2C dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys.pdf]
Prévisualisation
PDF
505kB
[thumbnail of Tables]
Prévisualisation
PDF (Tables)
260kB
[thumbnail of Figures]
Prévisualisation
PDF (Figures)
1MB

URL officielle: http://dx.doi.org/doi:10.1007/s11663-015-0564-y

Résumé

Nowadays, great interests are rising on aluminum alloys for the applications at elevated temperature, driven by the automotive and aerospace industries requiring high strength, light weight and low cost engineering materials. As one of the most promising candidates, Al-Mn-Mg 3004 alloys have been found to possess considerably high mechanical properties and creep resistance at elevated temperature resulted from the precipitation of a large number of thermally stable dispersoids during heat treatment. In present work, the effect of Fe contents on the evolution of microstructure as well as high temperature properties of 3004 alloys has been investigated. Results show that the dominant intermetallic changes from α-Al(MnFe)Si at 0.1 wt. % Fe to Al6(MnFe) at both 0.3 and 0.6 wt. % Fe. In the Fe range of 0.1 to 0.6 wt. % studied, a significant improvement on mechanical properties at elevated temperature has been observed due to the precipitation of dispersoids, and the best combination of yield strength and creep resistance at 573K (300°C) is obtained in the 0.3% Fe alloy with finest size and highest volume fraction of dispersoids. The superior properties obtained at 573K (300°C) makes 3004 alloys more promising for high temperature applications. The relationship between the Fe content and the dispersoid precipitation as well as the materials properties has been discussed.

Type de document:Article publié dans une revue avec comité d'évaluation
Version évaluée par les pairs:Oui
Date:2015
Sujets:Sciences naturelles et génie > Génie > Génie des matériaux et génie métallurgique
Département, module, service et unité de recherche:Départements et modules > Département des sciences appliquées
Mots-clés:Al-Mn-Mg 3004 alloys, Fe contents, intermetallics, dispersoids, elevated temperature properties, creep resistance
Déposé le:09 nov. 2016 23:26
Dernière modification:09 nov. 2016 23:26
Afficher les statistiques de telechargements

Éditer le document (administrateurs uniquement)

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630