LiveZilla Live Chat Software

Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Documents dans le département, le module, le service ou l'unité de recherche "Départements et modules > Département des sciences appliquées > Module d'ingénierie"

Monter d'un niveau
Exporter comme [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Regroupement : Aucun | Auteur | Type de document | Date
Nombre de documents archivés : 127.

1988

Bui Rung T. et Perron Jean. (1988). Performance analysis of the aluminum casting furnace. Metallurgical Transactions B, 19, (2), p. 171-180.

1990

Perron Jean et Bui Rung T.. (1990). Rotary cylinders : solid transport prediction by dimensional and rheological analysis. The Canadian Journal of Chemical Engineering, 68, (1), p. 61-68.

Février 1990

Ouellet R., Bui Rung T. et Perron Jean. (1990). Numerical simulation of a casting furnace. Simulation, 54, (2), p. 92-100.

1991

Bui Rung T., Simard G., Kocaefe Yasar S., Charette André, Lacroix M., Jain S., Perron Jean, Proulx André L. et Barr P. V.. (1991). 3D-simulation of the thermal performance of a coke calcining kiln. International Symposium on Extraction, Refining and Fabrication of Light Metals, 24, p. 307-314.

Avril 1992

Perron Jean et Bui Rung T.. (1992). Rotary cylinders : transverse bed motion prediction by rheological analysis. The Canadian Journal of Chemical Engineering, 70, (2), p. 223-231.

Décembre 1992

Perron Jean, Bui Rung T. et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : I. le modèle. The Canadian Journal of Chemical Engineering, 70, (6), p. 1108-1119.

Perron Jean, Bui Rung T. et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : II. Simulation du procédé. The Canadian Journal of Chemical Engineering, 70, (6), p. 1120-1131.

1993

Bui Rung T., Perron Jean et Read M.. (1993). Model-based optimization of the operation of the coke calcining kiln. Carbon, 31, (7), p. 1139-1147.

Février 1994

Perron Jean et Bui Rung T.. (1994). Fours rotatifs : modèle dynamique du mouvement du lit. The Canadian Journal of Chemical Engineering, 72, (1), p. 16-26.

Août 1995

Bui Rung T., Simard G., Charette André, Kocaefe Yasar S. et Perron Jean. (1995). Mathematical modeling of the rotary coke calcining kiln. The Canadian Journal of Chemical Engineering, 73, (4), p. 534-545.

2001

Rahem Ahmed. (2001). Analyse non linéaire en grandes rotations et grands déplacements des structures minces métalliques. Thèse de doctorat, Université Laval.

Janvier 2006

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Solutions de stockage de l'énergie éolienne : rapport interne. UQAR - Laboratoire de recherche groupe éolien LRGE.

Novembre 2006

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Moteur diesel suralimenté : bases et calculs, cycles réel, théorique et thermodynamique : rapport interne. Université du Québec à Rimouski - Laboratoire de recherche en énergie éolienne LREE, Université du Québec à Chicoutimi - Laboratoire international des matériaux antigivre LIMA.

2007

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Crashworthiness of aluminium tubes ; Part 2: improvement of hydroforming operation to increase absorption energy. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

D'Amours Guillaume, Rahem Ahmed, Williams Bruce, Worswick Michael et Mayer Robert. (2007). Crashworthiness of aluminium tubes ; Part 1 : Hydroforming at different corner-fill radii and end feeding levels. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

Ibrahim Hussein, Younes Rafic, Ilinca Adrian et Perron Jean. (2007). Investigation des générateurs hybrides d'électricité de type éolien-air comprimé. Revue des énergies renouvelables, p. 47-50.

Septembre 2007

Mayer C., Ilinca Adrian, Fortin Guy et Perron Jean. (2007). Wind tunnel study of the electro-thermal de-icing of wind turbine blades. International Journal of Offshore and Polar Engineering, 17, (3), p. 182-188.

2008

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. (2008). Wind turbine performance under icing conditions. Wind Energy, 11, (4), p. 319-333.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Energy storage systems : characteristics and comparisons. Renewable and Sustainable Energy Reviews, 12, (5), p. 1221-1250.

15 Février 2008

Safaee Alireza, Sarkar Dilip K. et Farzaneh Masoud. (2008). Superhydrophobic properties of silver-coated films on copper surface by galvanic exchange reaction. Applied Surface Science, 254, (8), p. 2493-2498.

31 Mars 2008

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2008). Superhydrophobic properties of ultrathin rf-sputtered Teflon films coated etched aluminum surfaces. Materials Letters, 62, (8-9), p. 1226-1229.

30 Avril 2008

Sarkar Dilip K. et Farzaneh Masoud. (2008). Fabrication of PECVD-grown fluorinated hydrocarbon nanoparticles and circular nanoring arrays using nanosphere lithography. Applied Surface Science, 254, (13), p. 3758-3761.

Septembre 2008

Fortin Guy, Mayer Christine et Perron Jean. (2008). Icing wind tunnel study of a wind turbine blade deicing system : simulation of deicing wind turbine blades with controlled electro-thermal systems. SEA Technology, 49, (9), p. 41-44.

3 Septembre 2008

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Investigation des différentes alternatives renouvelables et hybrides pour l'électrification des sites isolés : rapport interne. Université du Québec à Rimouski, Laboratoire de recherche en énergie éolienne, Université du Québec à Chicoutimi, Laboratoire international des matériaux antigivre.

2009

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2009). A hybrid wind-diesel-compressed air system for remote telecom infrastructures = Système hybride éolien-diesel avec stockage d'air comprimé pour l'électrification d'une station de télécommunications isolée. European Journal of Electrical Engineering, 12, (5-6), p. 701-731.

Otis Martin J.-D.. (2009). Analyse, commande et intégration d'un mécanisme parallèle entraîné par des câbles pour la réalisation d'une interface haptique comme métaphore de navigation dans un environnement virtuel. Thèse de doctorat, Université Laval.

Otis Martin J.-D., Perreault Simon, Nguyen-Dang Thien-Ly, Lambert Patrice, Gouttefarde Marc, Laurendeau Denis et Gosselin Clément. (2009). Determination and management of cable interferences between two 6-DOf foot platforms in a cable-driven locomotion interface. IEEE transactions on systems, man and cybernetics. Part A. Systems and humans, 39, (3), p. 528-544.

Sarkar Dilip K. et Farzaneh Masoud. (2009). Superhydrophobic coatings with reduced ice adhesion. Journal of Adhesion Science and Technology, 23, p. 1215-1237.

Octobre 2009

Saeidi Ali, Deck Olivier et Verdel Thierry. (2009). Development of building vulnerability functions in subsidence regions from empirical methods. Engineering Structures, 31, (10), p. 2275-2286.

2010

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Rahem Ahmed, Guillot Michel et Fafard Mario. (2010). Optimization on the production of variable thickness aluminium tubes. Dans : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, MSEC2010 , October 12-15, 2010, Erie, Pennsylvania.

Bihamta Reza, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Numerical studies on the production of variable thickness aluminium tubes for transportation purposes. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. (2010). Study and design of a hybrid wind-diesel-compressed air energy storage system for remote areas. Applied Energy, 87, (5), p. 1749-1762.

Kamguo Kamga H., Larouche D., Bournane M. et Rahem Ahmed. (2010). Hot tearing of aluminum-copper B206 alloys with iron and silicon additions. Materials Science and Engineering A : Structural Materials: Properties, Microstructure and Processing, 527, (27-28), p. 7413-7423.

Kamguo Kamga H., Larouche D., Bournane M. et Rahem Ahmed. (2010). Solidification of aluminum-copper B206 alloys with iron and silicon additions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, (11), p. 2844-2855.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W. et Chen X-Grant. (2010). Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Applied Materials & Interfaces, 2, (9), p. 2500-2502.

Sarkar Dilip K. et Paynter Royston W.. (2010). One-Step Deposition Process to Obtain Nanostructured Superhydrophobic Thin Films by Galvanic Exchange Reactions. Journal of Adhesion Science and Technology, 24, (6), p. 1181-1189.

Williams B. W., Worswick M. J., D'Amours Guillaume, Rahem Ahmed et Mayer R.. (2010). Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes. International Journal of Impact Engineering, 37, (10), p. 1008-1020.

15 Mars 2010

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2010). Wetting and superhydrophobic properties of PECVD grown hydrocarbon and fluorinated-hydrocarbon coatings. Applied Surface Science, 256, (11), p. 3698-3701.

25 Avril 2010

Sarkar Dilip K. et Saleema Noormohammed. (2010). One-step fabrication process of superhydrophobic green coatings. Surface and Coatings Technology, 204, (15), p. 2483-2486.

Août 2010

Perreautl Simon, Cardou Philippe, Gosselin Clément et Otis Martin J.-D.. (2010). Geometric determination of the interference-free constant-orientation workspace of parallel cable-driven mechanisms. Journal of Mechanisms and Robotics, 2, (3),

31 Décembre 2010

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2010). A one-step process to engineer superhydrophobic copper surfaces. Materials Letters, 64, (24), p. 2722-2724.

2011

Beisswenger Arlene, Laforte Caroline et Perron Jean. (2011). Issues and testing of non-glycol aircraft ground deicing fluids. Dans : SAE Technical Papers - SAE 2011 International Conference on Aircraft and Engine Icing and Ground Deicing , 13-17 June 2011, Chicago, IL.

Béland J.F, Fafard Mario, Rahem Ahmed, D'Amours Guillaume et Côté T.. (2011). Optimization on the cold drawing process of 6063 aluminium tubes. Applied Mathematical Modelling, 35, (11), p. 5302-5313.

Bihamta Reza, Bui Q. H., Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for production of variable thickness aluminium tubes : numerical and experimental studies. Journal of Materials Processing Technology, 211, (4), p. 578-589.

Bui Q. H., Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Investigation of the formability limit of aluminium tubes drawn with variable wall thickness. Journal of Materials Processing Technology, 211, (3), p. 402-414.

Bui Q. H., Bihamta Reza, Guillot Michel, Rahem Ahmed et Fafard Mario. (2011). Effect of cross section reduction on the mechanical properties of aluminium tubes drawn with variable wall thickness. Journal of Manufacturing Science and Engineering, 133, (6), p. 1-10.

Fortin Guy, Adomou Maryelle et Perron Jean. (2011). Experimental study of hybrid anti-icing systems combining thermoelectric and hydrophobic coatings. SAE Technical Papers, 380003,

Fortin Guy, Enneji Ilham, Beisswenger Arlene et Perron Jean. (2011). Experimental study of snow precipitation over a generic deicing fluid without fluid flow. SAE Technical Papers, 380045,

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2011). Fabrication of Superhydrophobic Surfaces on Aluminum Alloy Via Electrodeposition of Copper Followed by Electrochemical Modification. Nano-Micro Letters, 3, (3), p. 160-165.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Ramdenee D., Dimitrova Mariya Hristova, Perron Jean, Adegnon M., Boulay D. et Arbez C.. (2011). Potential of a hybrid wind-diesel-compressed air system for nordic remote canadian areas. Energy Procedia, 6, p. 795-804.

Matbou Riahi Mehran, Marceau D., Laforte Caroline et Perron Jean. (2011). The experimental/numerical study to predict mechanical behaviour at the ice/aluminium interface. Cold Regions Science and Technology, 65, (2), p. 191-202.

Moravej Maryam, Amira Sofiene, Prima Frédéric, Rahem Ahmed, Fiset Michel et Mantovani Diego. (2011). Effect of electrodeposition current density on the microstructure and the degradation of electroformed iron for degradable stents. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 176, (20), p. 1812-1822.

Saleema Noormohammed, Farzaneh Masoud, Paynter Royston W. et Sarkar Dilip K.. (2011). Prevention of ice accretion on aluminum surfaces by enhancing their hydrophobic properties. Journal of Adhesion Science and Technology, 25, p. 27-40.

8 Septembre 2011

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2011). Synthesis of Monodisperse Fluorinated Silica Nanoparticles and Their Superhydrophobic Thin Films. ACS Applied Materials & Interfaces, 3, (9), p. 3583-3588.

Octobre 2011

Saeidi Ali, Deck Olivier et Verdel Thierry. (2011). Développement d’un simulateur de dommages pour l’évaluation de la vulnérabilité en zone d’aléa minier. Mines & carrières (hors-série), (185), p. 34-38.

23 Novembre 2011

Saleema Noormohammed, Sarkar Dilip K., Gallant Danick, Paynter Royston W. et Chen X-Grant. (2011). Chemical Nature of Superhydrophobic Aluminium Alloy Surfaces Produced via a One-Step Process Using Fluoroalkyl-Silane in a Base Medium. ACS Applied Materials & Interfaces, 3, (12), p. 4775-4781.

2012

Basbous Tammam, Younes Rafic, Ilinca Adrian et Perron Jean. (2012). Fuel consumption evaluation of an optimized new hybrid pneumatic-combustion vehicle engine on several driving cycles. International Journal of Engine Research, 13, (3), p. 253-273.

Basbous Tammam, Younes Rafic, Ilinca Adrian et Perron Jean. (2012). A new hybrid pneumatic combustion engine to improve fuel consumption of wind-Diesel power system for non-interconnected areas. Applied Energy, 96, p. 459-476.

Basbous Tammam, Younes Rafic, Ilinca Adrian et Perron Jean. (2012). Pneumatic hybridization of a diesel engine using compressed air storage for wind-diesel energy generation. Energy, 38, (1), p. 264-275.

Basbous Tammam, Younes Rafic, Ilinca Adrian et Perron Jean. (2012). Required time response of a variable valve actuator equiping a hybrid pneumatic-combustion engine. International Journal of Engine Research, 13, (5), p. 514-528.

Bihamta Reza, Bui Q.H., Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2012). Application of a new procedure for the optimization of variable thickness drawing of aluminium tubes. CIRP Journal of Manufacturing Science and Technology, 5, (2), p. 142-150.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Surface modification and functionalization of oxide nanoparticles for superhydrophobic applications. Advanced Materials Research, 409, p. 469-473.

Fortin Guy et Perron Jean. (2012). Ice adhesion models to predict shear stress at shedding. Journal of Adhesion Science and Technology, 26, (4-5), p. 523-553.

Kamga H. K., Larouche D., Bournane M. et Rahem Ahmed. (2012). Mechanical properties of aluminium-copper B206 alloys with iron and silicon additions. International Journal of Cast Metals Research, 25, (1), p. 15-25.

Février 2012

Saeidi Ali, Deck Olivier et Verdel Thierry. (2012). Development of building vulnerability functions in subsidence regions from analytical methods. Geotechnique, 62, (2), p. 107-120.

15 Février 2012

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Fluorine Based Superhydrophobic Coatings. Applied Sciences, 2, (2), p. 453-464.

16 Mai 2012

Saleema Noormohammed, Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2012). Polymer masks fabrication by micropatterning surfaces of composite polymer coatings. Journal of Adhesion Science and Technology, 26, (22), p. 2531-2541.

15 Novembre 2012

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W., Gallant Danick et Eskandarian Masoomeh. (2012). A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications. Applied Surface Science, 261, p. 742-748.

2013

Ben Brahem Mahmoud, Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. (2013). Use of a 3DOF accelerometer for foot tracking and gesture recognition in mobile HCI. Procedia Computer Science, 19, p. 453-460.

Bihamta Reza, D'Amours Guillaume, Bui Q. H., Guillot Michel, Rahem Ahmed et Fafard Mario. (2013). Numerical and experimental studies on the new design concept of hydroforming dies for complex tubes. Materials and Design, 47, p. 766-778.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2013). Atmospheric icing severity : quantification and mapping. Atmospheric Research, 128, p. 57-75.

Perron Jean et Larocque Jacques. (2013). Alumina Crystallizer Mixing Using CFD. Dans Essential Readings in Light Metals: Alumina and Bauxite, Volume 1. (p. 563-569). Hoboken, N.J. : John Wiley.

Vandewynckel Julien, Otis Martin J.-D., Bouchard Bruno, Ménélas Bob-Antoine-Jerry et Bouzouane Abdenour. (2013). Towards a real-time error detection within a smart home by using activity recognition with a shoe-mounted accelerometer. Procedia Computer Science, 19, p. 516-523.

21 Mars 2013

Saeidi Ali, Deck Olivier et Verdel Thierry. (2013). Comparison of building damage assessment methods for risk analysis in mining subsidence regions. Geotechnical and Geological Engineering, 31, (4), p. 1073-1088.

Juin 2013

Saeidi Ali, Deck Olivier, Al Heib Marwan, Verdel Thierry et Rouleau Alain. (2013). Adjusting the influence function method for subsidence prediction. Key Engineering Materials, 553, p. 59-66.

6 Septembre 2013

Otis Martin J.-D.. (2013). Electromechanical characterization and locomotion control of IPMC BioMicroRobot. Advances in Materials Science and Engineering, 2013, p. 1-17.

1 Octobre 2013

Huang Ying, Sarkar Dilip K., Gallant Danick et Chen X-Grant. (2013). Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process. Applied Surface Science, 282, p. 689-694.

2014

Fraser Kirk A., St-Georges Lyne et Kiss Lazlo I.. (2014). Optimization of friction stir welding tool advance speed via Monte-Carlo simulation of the friction stir welding process. Materials, 7, p. 3435-3452.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2014). Atmospheric icing impact on wind turbine production. Cold Regions Science and Technology, 100, p. 36-49.

Shi Cangji, Lai Jing et Chen X-Grant. (2014). Microstructural evolution and dynamic softening mechanisms of Al-Zn-Mg-Cu alloy during hot compressive deformation. Materials, 7, (1), p. 244-264.

30 Janvier 2014

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Dilip K., Bhattacharyay Dipankar, Morais Brigitte et Chabot Jérôme. (2014). Coke–pitch interactions during anode preparation. Fuel, 117, (part A), p. 598-607.

22 Mai 2014

Chehouri Adam, Ghandour Mazen et Livinti Petru . (2014). A real time simulation of a photovoltaic system with maximum power point tracking. Proceedings of the International Conference on Industrial Power Engineering , 9th,

15 Juillet 2014

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). Electrochemical synthesis of highly ordered polypyrrole on copper modified aluminium substrates. Applied Surface Science, 307, p. 589-592.

2015

Basbous Tammam, Younes Rafic, Ilinca Adrian et Perron Jean. (2015). Optimal management of compressed air energy storage in a hybrid wind-pneumatic-diesel system for remote area's power generation. Energy, 84, p. 267-278.

Bihamta Reza, Bui Q. H., Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2015). Global optimisation of the production of complex aluminium tubes by the hydroforming process. CIRP Journal of Manufacturing Science and Technology, 9, p. 1-11.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2015). Studies of drag on the nanocomposite superhydrophobic surfaces. Applied Surface Science, 324, p. 525-531.

Han Yu-Mei et Chen X-Grant. (2015). Electrochemical behavior of Al-B₄C metal matrix composites in NaCl solution. Materials, 8, (9), p. 6455-6470.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing : From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Fortin Guy, Perron Jean et Benoit Robert. (2015). Canadian icing envelopes near the surface and its impact on wind energy assessment. Cold Regions Science and Technology, 120, p. 76-88.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2015). An extension of analytical methods for building damage evaluation in subsidence regions to anisotropic beams. European Journal of Environmental and Civil Engineering, 19, (6), p. 756-772.

Janvier 2015

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2015). Studies of drag on the nanocomposite superhydrophobic surfaces. Applied Surface Science, 324, (1), p. 525-531.

Saeidi Ali, Deck Olivier, Al heib M. et Verdel Thierry. (2015). Development of a damage simulator for the probabilistic assessment of building vulnerability in subsidence areas. International Journal of Rock Mechanics and Mining Sciences, 73, p. 42-53.

1 Février 2015

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process. Applied Surface Science, 237, p. 327-334.

Mars 2015

Chehouri Adam, Younes Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

1 Juin 2015

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean, Audibert-Hayet Annie et Melot Denis. (2015). Nano-micro structured superhydrophobic zinc coating on steel for prevention of corrosion and ice adhesion. Journal of Colloid and Interface Science, 447, p. 240-247.

3 Août 2015

Polesel Étienne. (2015). Étude de l’inclusion de la détection des activités humaines dans une cellule de travail hybride dédiée à la commande intelligente de robots via ROS en utilisant un réseau de capteurs portables sans fil. Rapport de stage et/ou d'intervention, UQAC.

Octobre 2015

Loiselle Luc, Fofana Issouf, Sabau John, Magdaleno-Adame Salvador et Olivares-Galvan Juan Carlos. (2015). Comparative studies of the stability of various fluids under electrical discharge and thermal stresses. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2491-2499.

30 Novembre 2015

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied Surface Science, 356, p. 1012-1024.

2016

Campeau-Lecours Alexandre, Otis Martin J.-D., Belzile Pierre-Luc et Gosselin Clément. (2016). A time-domain vibration observer and controller for physical human-robot interaction. Mechatronics, 36, p. 45-53.

Chehouri Adam, Younes Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi-objective optimization. Dans Wind Turbines : Design, Control and Applications. (p. 121-147). Rijeka, Croatia : InTech.

Guérin Frédéric, Laforte Caroline, Farinas Marie-Isabelle et Perron Jean. (2016). Analytical model based on experimental data of centrifuge ice adhesion tests with different substrates. Cold Regions Science and Technology, 121, p. 93-99.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2016). Fabrication of corrosion resistance micro-nanostructured superhydrophobic anodized aluminum in a one-step electrodeposition process. Metals, 6, (3), p. 47.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sarkar Dilip K. et Morais Brigitte. (2016). Effect of crystallinity on the wettability of petroleum coke by coal tar pitch. Energy & Fuels, 30, (4), p. 3549-3558.

Shakiba Mohammad, Parson Nick et Chen X-Grant. (2016). Modeling the Effects of Cu content and deformation variables on the high-temperature flow behavior of dilute Al-Fe-Si alloys using an artificial neural network. Materials, 9, (7), p. 536.

Xu Na, Sarkar Dilip K., Grant Chen X., Zhang Hui et Tong Weiping. (2016). Superhydrophobic copper stearate/copper oxide thin films by a simple one-step electrochemical process and their corrosion resistance properties. RSC Advances, 6, (42), p. 35466-35478.

Janvier 2016

Farid H., Farzaneh Masoud, Saeidi Ali et Erchiqui Fouad. (2016). A contribution to the study of the compressive behavior of atmospheric ice. Cold Regions Science and Technology, 121, p. 60-65.

27 Juillet 2016

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi‐objective optimization. Dans Wind turbines : design, control and applications. (p. 121-148). Croatia : InTech.

Septembre 2016

Xu Na, Sarkar Dilip K., Chen X-Grant et Tong Weiping. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, p. 173-184.

7 Septembre 2016

Otis Martin J.-D., Ayena Johannes C., Tremblay Louis E., Fortin Pascal E. et Ménélas Bob-Antoine-Jerry. (2016). Use of an enactive insole for reducing the risk of falling on different types of soil using vibrotactile cueing for the elderly. PLoS ONE, 11, (9), e0162107.

9 Septembre 2016

Campeau-Lecours Alexandre, Otis Martin J.-D. et Gosselin Clément. (2016). Modeling of physical human–robot interaction : admittance controllers applied to intelligent assist devices with large payload. International Journal of Advanced Robotic Systems, 13, (5), p. 1-12.

24 Septembre 2016

Khelil Nawel et Otis Martin J.-D.. (2016). Finite-time stabilization of homogeneous non-Lipschitz systems. Mathematics, 4, (58), p. 1-14.

Octobre 2016

Saeidi Ali, Maazallahi V. et Rouleau Alain. (2016). Assessment of slide surface and pre-slide topography using site investigation data in back analysis. International Journal of Rock Mechanics and Mining Sciences, 88, p. 29-33.

2017

Barkallah Eya, Freulard Johan, Otis Martin J.-D., Ngomo Suzy, Ayena Johannes C. et Desrosiers Christian. (2017). Wearable devices for classification of inadequate posture at work using neural networks. Sensors, 17, (9), p. 1-24.

Poncsák Sándor, Kiss Lazlo I., Guérard Sébastien et Bilodeau Jean-François. (2017). Impact of the solidification rate on the chemical composition of frozen cryolite bath. Metals, 7, (3), p. 97.

Avril 2017

Liu Kun, Nabawy Ahmed et Chen X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr. Journal of Materials Engineering and Performance, 26, (4), p. 1673-1684.

6 Avril 2017

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2017). A non-destructive technique for the on-line quality control of green and baked anodes. Metals, 7, (4), p. 128-138.

1 Juin 2017

Elgallad Emad Eldin, Zhang Zhan et Chen X-Grant. (2017). Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy. Physica B: Condensed Matter, 514, p. 70-77.

14 Juin 2017

Liu Kun et Chen X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

22 Juin 2017

Liu Kun et Chen X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

1 Août 2017

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature. Journal of composite materials, 51, (18), p. 2643-2653.

21 Août 2017

Sassi Mohamed Amir, Otis Martin J.-D. et Campeau-Lecours Alexandre. (2017). Active stability observer using artificial neural network for intuitive physical human–robot interaction. International Journal of Advanced Robotic Systems, p. 1-16.

Octobre 2017

Millet Guillaume, Otis Martin J.-D., Horodniczy Daniel et Cooperstock Jeremy R.. (2017). Design of variable-friction devices for shoe-floor contact. Mechatronics, 46, p. 115-125.

18 Novembre 2017

Pan Lei, Mirza Foisal Ahmed, Liu Kun et Chen X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Décembre 2017

Meziane Ramy, Otis Martin J.-D. et Ezzaidi Hassan. (2017). Human-robot collaboration while Sharing Production Activities in Dynamic Environment : SPADER system. Robotics and Computer-Integrated Manufacturing, 48, p. 243-253.

Cette liste a été générée le lundi 25 sept. 2017 23:04:28.

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630