Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Elgallad Emad M., Chen Zhixing et Chen X-Grant. (2023). On the Room- and Elevated-Temperature Tensile Properties of Hot-Rolled 6082 Alloys Containing Thermally Stable Dispersoids. Journal of Materials Engineering and Performance,

Hu Peng, Liu Kun, Pan Lei et Chen X-Grant. (2023). Effects of individual and combined additions of transition elements (Zr, Ti and V) on the microstructure stability and elevated-temperature properties of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 867, e144718.

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2023). Temperature dependence of elastic properties of Al-Mg-Si direct-Chill-cast AA6111 alloy at near-solidus temperatures. Journal of Materials Engineering and Performance,

Heidarzadeh Akbar, Javidani Mousa, Mofarrehi Mohammadreza, Motalleb-nejad Pouyan, Mohammadzadeh Roghayeh, Jafarian Hamidreza et Chen X-Grant. (2023). Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials, 16, (3), e944.

Liu Kun, Wang Shuai, Pan Lei et Chen X-Grant. (2023). Thermo-Mechanical fatigue behavior and resultant microstructure evolution in Al-Si 319 and 356 cast alloys. Materials, 16, (2), p. 829.

Ahmed Mohamed, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2023). Welding of AA6061-T6 Sheets Using High-Strength 4xxx Fillers: Effect of Mg on Mechanical and Fatigue Properties. Materials, 16, (10), e3832.

Cui Liying, Zhang Zhan et Chen X-Grant. (2023). Development of lightweight Al-based entropy alloys for elevated temperature applications. Journal of Alloys and Compounds, 938, e168619.

Cui Liying, Zhang Zhan et Chen X-Grant. (2023). Microstructure and mechanical properties of novel Al–Cu–Mg–Zn lightweight entropy alloys for elevated-temperature applications. Materials Characterization, 200, e112927.

Hajji Chaima. (2023). Effect of grain refiners on the refining performance in aluminum wrought AA6111 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Heidarzadeh Akbar, Khorshidi Mahsa, Mohammadzadeh Roghayeh, Khajeh Rasoul, Mofarrehi Mohammadreza, Javidani Mousa et Chen X-Grant. (2023). Multipass friction stir processing of laser-powder bed fusion AlSi10Mg: microstructure and mechanical properties. Materials, 16, e1559.

Hu Peng. (2023). Elevated-temperature mechanical, creep and fatigue behavior of aluminum-copper cast aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Li Dong, Liu Kun et Chen X-Grant. (2023). Evolution of Microstructure and Elevated-Temperature Properties during Thermal Exposure with Transition Elements (V, Zr and Mo) in Al–Si 356 Type Cast Alloys. MATERIALS TRANSACTIONS, 64, (2), p. 406-413.

Liu Kun, Wang Shuai, Hu Peng, Pan Lei et Chen X-Grant. (2023). Improved Thermo-Mechanical Fatigue Resistance of Al-Si-Cu 319 Alloys by Microalloying with Mo. Materials, 16, (9), e3515.

Wang Zimeng. (2023). Evolution of microstructure and mechanical properties during elevated-temperature thermal exposure with Si and transition elements additions in Al-Cu 224 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Zhang Zhan, Arici Anil, Breton Francis et Chen X-Grant. (2023). Influence of transition elements (Zr, V, and Mo) on microstructure and tensile properties of AlSi8Mg casting alloys. Canadian Metallurgical Quarterly, p. 1-10.

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2022). Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys. Journal of Materials Science,

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization. Philosophical Magazine, p. 1-17.

Agbe Henry, Sarkar Dilip K., Chen X-Grant et Dodoo-Arhin David. (2022). Silver–polymethylhydrosiloxane–quaternary ammonium coating on anodized aluminum with excellent antibacterial property. ACS Applied Bio Materials, 5, (10), p. 4760-4769.

Agbe Henry, Sarkar Dilip et Chen X-Grant. (2022). Anodized aluminum surface with topography-mediated antibacterial properties. ACS Biomaterials Science & Engineering, 8, (3), p. 1087-1095.

Ahmed Mohamed, Javidani Mousa, Mirakhorli Fatemeh, Maltais Alexandre et Chen X-Grant. (2022). Developing High-Strength Al-Si-Mg Filler Metals for Aluminum Fusion Welding. Journal of Materials Engineering and Performance,

Algendy Ahmed. (2022). Precipitation behaviors of Mn-bearing dispersoids and Al3(Sc,Zr) precipitates and their impacts on the microstructure and mechanical properties of rolled Al-Mg-Mn 5xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Algendy Ahmed Y., Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2022). Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys. Materials Science and Engineering: A, 855, e143950.

Algendy Ahmed Y., Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2022). Evolution of discontinuous/continuous Al3(Sc,Zr) precipitation in Al-Mg-Mn 5083 alloy during thermomechanical process and its impact on tensile properties. Materials Characterization, 192, e112241.

Chen Zhixing, Elgallad Emad M., Liu Kun et Chen X-Grant. (2022). Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions. Metallography, Microstructure, and Analysis,

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Effect of Si Level on the Evolution of Zr‐Bearing Dispersoids and the Related Hot Deformation and Recrystallization Behaviors in Al–Si–Mg 6xxx Alloys. Advanced Engineering Materials, e2101606.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Nucleation and transformation of Zr-bearing dispersoids in Al–Mg–Si 6xxx alloys. Journal of Materials Research,

Elashery Ali. (2022). Effect of Zr-bearing dispersoids evolution on hot deformation and recrystallization of 6xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi, Chen X-Grant et Massinon Denis. (2022). Modelling of strain-controlled thermomechanical fatigue testing of cast AlSi7Cu3.5Mg0.15 (Mn, Zr, V) alloy for different aging conditions. Metals, 12, e1258.

Hu Peng, Liu Kun, Pan Lei et Chen X-Grant. (2022). Effect of Mg microalloying on elevated-temperature creep resistance of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 851, e143649.

Khangholi Siamak Nikzad, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2022). Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments. Journal of Alloys and Compounds, 914, e165242.

Khangholi Siamak Nikzad, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2022). Review on recent progress in Al–Mg–Si 6xxx conductor alloys. Journal of Materials Research, 37, (3), p. 670-691.

Li Cong. (2022). Relationship between thermal conductivity and electrical conductivity in B4C particle reinforced aluminum matrix composites. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ma K., Elgallad Emad M., Chen Zhixing, Xiao B. L. et Chen X-Grant. (2022). Improving the elevated-temperature mechanical properties of AA3004 hot-rolled sheets by microalloying with Mo and optimizing the process route. Journal of Materials Research and Technology, 19, p. 4489-4503.

Mofarrehi Mohammadreza. (2022). Thermomechanical behavior of Al-Mg-Mn alloys: effect of Mn and Na on hot workability. Thèse de doctorat, Université du Québec à Chicoutimi.

Wang Shuai. (2022). Thermo-mechanical fatigue behaviors of Al-Si 319 and 356 cast alloys and the influence of Mo on their evolution. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2021). Electrochemically synthesized silver phosphate coating on anodized aluminum with superior antibacterial properties. Surface and Coatings Technology, 428, e127892.

Li Dong, Liu Kun, Rakhmonov Jovid et Chen X-Grant. (2021). Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys. Materials Science and Engineering: A, 827, e142090.

Ma K., Li X. N., Liu Kun, Chen X-Grant, Liu Z. Y., Xiao B. L. et Ma Zheyuan. (2021). Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones. Composites Part B: Engineering, 222, e109094.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2021). Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys. Materials Science and Engineering: A, 820, p. 141538.

Ma K., Liu Z. Y., Liu Kun, Chen X-Grant, Xiao B. L. et Ma Zheyuan. (2021). Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon, 178, p. 190-201.

Mofarrehi Mohammadreza, Javidani Mousa et Chen X-Grant. (2021). On the intermetallic constituents in the sodium-induced edge cracking of hot-rolled AA5182 aluminum alloys. Philosophical Magazine, 101, (16), p. 1849-1870.

Elashri A., Elgallad E. M., Parson Nick et Chen X-Grant. (2021). Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy. Journal of Materials Engineering and Performance, 30, p. 7851-7862.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content. Journal of Alloys and Compounds, 861, p. 157937.

Rakhmonov Jovid, Qassem Mohamed, Larouche Daniel, Liu Kun, Javidani Mousa, Colbert Josée et Chen X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Agbe Henry. (2021). Antibacterial Aluminum Surfaces. Thèse de doctorat, Université du Québec à Chicoutimi.

Algendy Ahmed Y., Liu Kun et Chen X-Grant. (2021). Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy. Materials Characterization, 181, e111487.

Heidarzadeh Akbar, Javidani Mousa, Mofarrehi Mohammadreza, Farzaneh Amir et Chen X-Grant. (2021). Submerged dissimilar friction stir welding of AA6061 and AA7075 aluminum alloys: microstructure characterization and mechanical property. Metals, 11, (10), e1592.

Jann Jessica, Drevelle Olivier, Chen X-Grant, Auclair-Gilbert Myriam, Soucy Gervais, Faucheux Nathalie et Fortier Louis-Charles. (2021). Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria. RSC Advances, 11, (60), p. 38172-38188.

Liu Kun, Elgallad Emad, Li Chen et Chen X-Grant. (2021). Effects of Zr and Sc additions on precipitation of α-Al(FeMn)Si dispersoids under various heat treatments in Al–Mg–Si AA6082 alloys. International Journal of Materials Research, 112, (9), p. 706-716.

Nikzad Khangholi Siamak. (2021). Improvement of mechanical strength and electrical conductivity in 6xxx series aluminum conductor alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Enhanced elevated-temperature strength and creep resistance of dispersion-strengthened Al-Mg-Si-Mn AA6082 alloys through modified processing route. Materials, 14, (19), e5489.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2020). Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high-temperature exposure through dispersoid strengthening. Materials, 13, (22), p. 5295.

Algendy Ahmed Y., Liu Kun et Chen X-Grant. (2020). Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels. MATEC Web of Conferences, 326, e02002.

Li Dong, Liu Kun et Chen X-Grant. (2020). Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02003),

Liu Kun, Li Chen et Chen X-Grant. (2020). Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (03001),

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2020). Quench sensitivity and phase transformation kinetics of AlSi7MnMg high pressure vacuum die casting. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02001),

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels. Dans : The 17th International Conference on Aluminium Alloys 2020 (ICAA17) , October 26-29, 2020, Grenoble, France.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Optimization of mechanical properties and electrical conductivity in Al–Mg–Si 6201 alloys with different Mg/Si ratios. Journal of Materials Research, 35, (20), p. 2765-2776.

Elgallad E. M., Liu Kun, Zhang Zhan et Chen X-Grant. (2020). Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy. Philosophical Magazine, 101, (1), p. 96-116.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing. Journal of Materials Science & Technology, 52, p. 189-197.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver–polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver−polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Rakhmonov Jovid, Liu Kun, Pan Lei, Breton Francis et Chen X-Grant. (2020). Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg. Journal of Alloys and Compounds, 827, (154305),

Attia Mohamed, Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2020). Fatigue cycles and performance evaluation of accelerating aging heat treated aluminum semi solid materials designed for automotive dynamic components. Applied Sciences, 10, (9), p. 1-15.

Li J. S., Raoelison R. N., Sapanathan T., Zhang Zhan, Chen X-Grant, Marceau Daniel, Hou Y. L. et Rachik M.. (2020). An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. Applied Physics Letters, 116, (161601),

Li Chen, Liu Kun et Chen X-Grant. (2020). Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology, 39, p. 135-143.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effect of post-homogenisation cooling rate and Mn addition on Mg2Si precipitation and hot workability of AA6060 alloys. Canadian Metallurgical Quarterly, 59, (2), p. 189-200.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2020). Evolution of dispersoids and their effects on elevated-temperature strength and creep resistance in Al-Si-Cu 319 cast alloys with Mn and Mo additions. Materials Science and Engineering: A, 770, p. 138554.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2020). Tunable Superhydrophobic Aluminum Surfaces with Anti-Biofouling and Antibacterial Properties. Coatings, 10, (10), p. 982.

Chen Zhixing, Liu Kun, Elgallad Emad M., Breton Francis et Chen X-Grant. (2020). Differential scanning calorimetry fingerprints of various heat-treatment tempers of different aluminum alloys. Metals, 10, (6), e763.

Jin L., Liu Kun et Chen X-Grant. (2020). Improved elevated temperature properties in Al-13%Si piston alloys by Mo addition. Journal of Materials Engineering and Performance, 29, (1), p. 126-134.

Li Dong. (2020). Effet des éléments de transition sur les comportements de précipitation des dispersoïdes/précipités et les propriétés à haute température des alliages coulés Al-Si et Al-Cu. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Rakhmonov Jovid, Liu Kun et Chen X-Grant. (2020). Effects of compositional variation on the thermal stability of θ′-Al2Cu precipitates and elevated-temperature strengths in Al-Cu 206 alloys. Journal of Materials Engineering and Performance, 29, (11), p. 7221-7230.

Chen Sinan, Liu Kun et Chen X-Grant. (2019). Precipitation behavior of dispersoids and elevated-temperature properties in Al–Si–Mg foundry alloy with Mo addition. Journal of Materials Research, 34, (18), p. 3071-3081.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effects of Mn addition and related Mn-containing dispersoids on the hot deformation behavior of 6082 aluminum alloys. Materials Science and Engineering: A, 764, p. 138253.

Xu Wei, Rajan Karthikeyan, Chen X-Grant et Sarkar Dilip K.. (2019). Facile electrodeposition of superhydrophobic aluminum stearate thin films on copper substrates for active corrosion protection. Surface & Coatings Technology,

Arici Anil. (2019). Development of Al-Si-Mg alloys for permanent mold casting and high-pressure vacuum die casting applications. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Attia Mohamed. (2019). Study of design and thermal treatment of automotive control arm fabricated from A357 semi-solid alloy. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen Sinan, Liu Kun et Chen X-Grant. (2019). Elevated-temperature low-cycle fatigue behaviors of Al-Si 356 and 319 foundry alloys. Dans : TMS-Light Metals 2019 , March 10-14, San Antonio, Texas.

Chen Zhixing. (2019). L'identification de la calorimétrie à balayage différentiel (DSC) des conditions de traitement thermique des alliages d'aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi et Chen X-Grant. (2019). Evaluation of the growth kinetics of θ′ and θ-Al2Cu precipitates in a binary Al-3.5 Wt Pct Cu alloy. Metallurgical and Materials Transactions A, 50, (7), p. 3048-3060.

Heugue Pierre, Larouche Daniel, Breton Francis, Massinon Denis, Martinez Rémi et Chen X-Grant. (2019). Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu3.5Mg0.15 cast alloy with Zr and V additions. Metals, 9, (7), e777.

Jin Lanfeng. (2019). Development of Al–Si cast alloys for elevated-temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2019). Evolution of Fe-Rich intermetallics in Al-Si-Cu 319 cast alloy with various Fe, Mo, and Mn contents. Metallurgical and Materials Transactions B, 50, (4), p. 1896-1907.

Liu Kun, Cao X., Bolouri Amir et Chen X-Grant. (2019). Effect of Fe-rich intermetallics on tensile behavior of Al-Cu 206 cast alloys at solid and near-solid states. Dans : TMS-2019 Shape Casting: 7th International Symposium celebrating Prof. John Campbell’s 80 th Birthday , March 10-14, San Antonio, Texas.

Liu Kun et Chen X-Grant. (2019). Influence of the modification of iron-bearing intermetallic and eutectic Si on the mechanical behavior near the solidus temperature in Al-Si-Cu 319 cast alloy. Physica B: Condensed Matter, 560, p. 126-132.

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2019). Investigation of the quench sensitivity of an AlSi10Mg alloy in permanent mold and high-pressure vacuum die wastings. Materials, 12, (11), e1876.

Qian Xiaoming. (2019). Hot deformation behavior of 6xxx aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effect of homogenization treatment and microalloying with Mn on the microstructure and hot workability of AA6060 aluminum alloys. Journal of Materials Engineering and Performance, 28, (8), p. 4531-4542.

Qin Jian, Zhang Zhan et Chen X-Grant. (2019). Evolution of activation energy during hot deformation of Al–15% B4C composites containing Sc and Zr. AIMS Materials Science, 6, (4), p. 484-497.

Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2019). Quality index charts of Al-Si-Mg semi solid alloys subjected to multiple temperatures aging treatments and different quenching media. Materials, 12, (11), e1834.

Xu Wei. (2018). Synthèse et caractérisation des revêtements superhydrophobes à base d’aluminium pour une protection active contre la corrosion des substrats métalliques. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bolouri Amir et Chen X-Grant. (2018). Transient rheological behavior of semisolid SEED-processed 7075 aluminum alloys in rapid compression. Metallurgical and Materials Transactions B, 49, (5), p. 2858-2867.

Chen Sinan. (2018). Effet de l’addition de molybdène et des conditions de traitement thermique sur l’évolution des dispersoïdes et les propriétés de température élevée de l’alliage de fonderie A356. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Chen. (2018). Precipitation behaviors of dispersoids induced from transition elements (Mn, Sc and Zr) and their effect on recrystallization resistance in AA6082 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). Effect of metastable Mg2Si and dislocations on α-Al(MnFe)Si dispersoid formation in Al-Mn-Mg 3xxx alloys. Metallurgical and Materials Transactions A, 49, (11), p. 5799-5814.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). Improvement in the mechanical properties and creep resistance of Al-Mn-Mg 3004 alloy with Sc and Zr addition. Materials Science and Engineering: A, 729, p. 196-207.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). The Influence of Cu addition on dispersoid formation and mechanical properties of Al-Mn-Mg 3004 alloy. Metals, 8, (3), e155.

Liu Kun et Chen X-Grant. (2018). Improvement in elevated-temperature properties of Al–13% Si piston alloys by dispersoid strengthening via Mn addition. Journal of Materials Research, 33, (20), p. 3430-3438.

Liu Kun, Ma Hezhaoye et Chen X-Grant. (2018). Improving the Elevated-Temperature Properties by Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys. Metallurgical and Materials Transactions B, 49, (4), p. 1588-1596.

Liu Kun, Mirza Foisal Ahmed et Chen X-Grant. (2018). Effect of overaging on the cyclic deformation behavior of an AA6061 aluminum alloy. Metals, 8, (7), e528.

Liu Mengyun. (2018). Quench sensitivity of high pressure vacuum die castings and permanent mold castings of Aural-3/5 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2018). Influence of thermal aging parameters on the characteristics of aluminum semi-solid alloys. Metals, 8, (10), e746.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Ultraviolet-durable superhydrophobic nanocomposite thin films based on cobalt stearate-coated TiO2 nanoparticles combined with polymethylhydrosiloxane. ACS Omega, 2, (11), p. 8198-8204.

Pan Lei, Mirza Foisal Ahmed, Liu Kun et Chen X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Li Zhen. (2017). Development of Al-Mn-Mg 3xxx alloys for applications at elevated temperature. Thèse de doctorat, Université du Québec à Chicoutimi.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature. Journal of composite materials, 51, (18), p. 2643-2653.

Liu Kun et Chen X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Superhydrophobic honeycomb-like cobalt stearate thin films on aluminum with excellent anti-corrosion properties. Applied surface science, 407, p. 361-370.

Liu Kun et Chen X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

Elgallad Emad Eldin, Zhang Zhan et Chen X-Grant. (2017). Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy. Physica B: Condensed Matter, 514, p. 70-77.

Liu Kun, Nabawy Ahmed et Chen X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr. Journal of Materials Engineering and Performance, 26, (4), p. 1673-1684.

Liu Kun, Ma Hezhaoye et Chen X-Grant. (2017). Enhanced elevated-temperature properties via Mo addition in Al-Mn-Mg 3004 alloy. Journal of alloys and compounds, 694, p. 354-365.

Li Zhen, Zhang Zhan et Chen X-Grant. (2017). Microstructure, elevated-temperature mechanical properties and creep resistance of dispersoid-strengthened Al-Mn-Mg 3xxx alloys with varying Mg and Si contents. Materials Science and Engineering: A, 708, p. 383-394.

Mirza Foisal Ahmed, Macwan A., Bhole S.D., Chen D.L. et Chen X-Grant. (2017). Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets. Materials Science and Engineering: A, 690, p. 323-336.

Pan Lei, Liu Kun, Breton Francis et Chen X-Grant. (2017). Effects of minor Cu and Mg additions on microstructure and material properties of 8xxx aluminum conductor alloys. Journal of Materials Research, 32, (6), p. 1094-1104.

Xiong Jiawei. (2016). Durable nanostructured superhydrophobic coatings on aluminum alloy substrates. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xu Na, Sarkar Dilip K., Chen X-Grant et Tong Weiping. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, p. 173-184.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Pan Lei. (2016). Effects of alloying elements on the microstructure and properties of 8xxx electrical conductor alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Qin Jian. (2016). Mechanical properties and hot workability of Al-15%B4C metal matrix composites with Sc and Zr for elevated temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Zhao Qinfu. (2016). Study on the rheoformability of semisolid 7075 wrought aluminum alloy using SEED process. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bolouri Amir, Liu Kun et Chen X-Grant. (2016). Effects of iron-rich intermetallics and grain structure on semisolid tensile properties of Al-Cu 206 cast alloys near solidus temperature. Metallurgical and Materials Transactions A,

Guo Zhanying, Zhao Gang et Chen X-Grant. (2016). Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing. Materials Characterization, 114, p. 79-87.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2016). Fabrication of corrosion resistance micro-nanostructured superhydrophobic anodized aluminum in a one-step electrodeposition process. Metals, 6, (3), p. 47.

Mirza Foisal Ahmed, Macwan A., Bhole S.D., Chen D.L. et Chen X-Grant. (2016). Effect of welding energy on microstructure and strength of ultrasonic spot welded dissimilar joints of aluminum to steel sheets. Materials Science and Engineering: A, 668, p. 73-85.

Pan Lei, Liu Kun, Breton Francis et Chen X-Grant. (2016). Effect of Fe on microstructure and properties of 8xxx aluminum conductor alloys. Journal of Materials Engineering and Performance, 25, (12), p. 5201-5208.

Qin Jian, Zhang Zhan et Chen X-Grant. (2016). Mechanical properties and strengthening mechanisms of Al-15 Pct B4C composites with Sc and Zr at elevated temperatures. Metallurgical and Materials Transactions A, 47, (9), p. 4694-4708.

Shakiba Mohammad, Parson Nick et Chen X-Grant. (2016). Modeling the Effects of Cu content and deformation variables on the high-temperature flow behavior of dilute Al-Fe-Si alloys using an artificial neural network. Materials, 9, (7), p. 536.

Shi Cangji et Chen X-Grant. (2016). Evolution of activation energies for hot deformation of 7150 aluminum alloys with various Zr and V additions. Materials Science and Engineering: A, 650, p. 197-209.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied Surface Science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied surface science, 356, p. 1012-1024.

Liu Kun et Chen X-Grant. (2015). Development of Al-Mn-Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening. Materials and Design, 84, p. 340-350.

Ma Hezhaoye. (2015). The effects of Mo addition and heat treatment on elevated temperature properties of AA3004 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process. Applied Surface Science, 237, p. 327-334.

Shakiba Mohammad. (2015). Effect of homogenization and alloying elements on hot deformation behaviour of 1XXX series aluminum alloys = Effet des éléments d'alliage et d'homogénéisation sur le comportement à la déformation à chaud des alliages d'aluminium de la série 1XXX. Thèse de doctorat, Université du Québec à Chicoutimi.

Guo Zhanying, Zhao Gang et Chen X-Grant. (2015). Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy. Materials Characterization, 102, p. 122-130.

Han Yu-Mei et Chen X-Grant. (2015). Electrochemical behavior of Al-B₄C metal matrix composites in NaCl solution. Materials, 8, (9), p. 6455-6470.

Liu Kun et Chen X-Grant. (2015). Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys. Metallurgical and Materials Transactions B,

Shi Cangji. (2014). Effects of Zr and V on microstructure and hot deformation behavior of 7150 aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Shi Cangji, Lai Jing et Chen X-Grant. (2014). Microstructural evolution and dynamic softening mechanisms of Al-Zn-Mg-Cu alloy during hot compressive deformation. Materials, 7, (1), p. 244-264.

Huang Ying, Sarkar Dilip K., Gallant Danick et Chen X-Grant. (2013). Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process. Applied Surface Science, 282, p. 689-694.

Guo Jun Feng. (2012). Joining of Al-B4C metal matrix composites by laser welding and friction stir welding. Thèse de doctorat, Université du Québec à Chicoutimi.

Han Yumei. (2012). Corrosion des composites à matrice metallique du type Al-B4C dans les solutions aqueuses. Thèse de doctorat, Université du Québec à Chicoutimi.

Huang Ying. (2012). Protection of metal and alloy surfaces using corrosion resistance nanostructured superhydrophobic coatings. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Kocaefe Duygu, Sarkar Dilip K. et Chen X-Grant. (2012). Effect of Ti addition on the wettability of Al-B4C metal matrix composites. International Journal of materials research, 103, (6), p. 729-736.

Lemieux Alain. (2012). Effets du Si, Cu et Fe sur les propriétés statiques et dynamiques d'un alliage 206 (Al-Cu) en semi-solide produit par le procédé SEED. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Gaofeng. (2012). Effect of trace elements V and Ni on Fe intermetallic phases formation and distribution in DC cast 5xxx series Al ingots. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Liu Kun. (2012). Solidification of iron-rich intermetallic phases and their effects on tensile properties in Al-Cu 206 cast alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Shen Peng. (2012). The effects of heat treatment on the microstructure and mechanical properties of the AA2618 DC cast plate. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tebib Mehand. (2012). Rheological behavior and microstructural evolution of semi-solid hypereutectic Al-Si-Mg-Cu alloys using rheoforming process. Thèse de doctorat, Université du Québec à Chicoutimi.

Saleema Noormohammed, Sarkar Dilip K., Gallant Danick, Paynter Royston W. et Chen X-Grant. (2011). Chemical Nature of Superhydrophobic Aluminium Alloy Surfaces Produced via a One-Step Process Using Fluoroalkyl-Silane in a Base Medium. ACS Applied Materials & Interfaces, 3, (12), p. 4775-4781.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2011). Fabrication of Superhydrophobic Surfaces on Aluminum Alloy Via Electrodeposition of Copper Followed by Electrochemical Modification. Nano-Micro Letters, 3, (3), p. 160-165.

Lai Jing. (2011). Developing Sc and Zr containing Al-B?C metal matrix composites for high temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2010). A one-step process to engineer superhydrophobic copper surfaces. Materials Letters, 64, (24), p. 2722-2724.

Gauthier Pascal. (2010). Corrosion behaviour study of the forged AA6082 aluminum alloy from different feedstock. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W. et Chen X-Grant. (2010). Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Applied Materials & Interfaces, 2, (9), p. 2500-2502.

Shi Cangji. (2010). Investigation and characterization of fluidity and microstructure of recycled AL-B4C materials. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Racine Dany. (2009). Effet du temps et de la température sur l'homogénéisation d'un alliage d'aluminium AA6061 destiné au forgeage à chaud. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Sarkar Arunima. (2009). Investigation on wetting of B4C by aluminum alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Farzaneh Masoud, Fofana Issouf, Tavakoli C. et Chen X-Grant. (2003). Dynamic modeling of DC arc discharge on ice surfaces. IEEE Transactions on Dielectrics and Electrical Insulation, 10, (3), p. 463-474.