Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Amara Belkacem. (2022). Utilisation du biocharbon dans la production des anodes en carbone. Thèse de doctorat, Université du Québec à Chicoutimi.

Amara Belkacem, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2022). Effect of Coke Type on Partial Replacement of Coke with Modified Biocoke in Anodes Used in Primary Aluminum Production. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 818-825). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Amara Belkacem, Faouzi Fatima-Ezzahra, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2021). Modification of biocoke destined for the fabrication of anodes used in primary aluminum production. Fuel, 304, e121352.

Sanogo Bazoumana, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Côté Jules. (2021). Determination of optimum vibro-compaction time using sound analysis. Journal of Manufacturing Processes, 68, (Part B), p. 118-125.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Study on the cracking of carbon anodes used in aluminium industry. The Canadian Journal of Chemical Engineering, p. 1-12.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Effect of carbon anode production parameters on anode cracking. SN Applied Sciences, 3,

Bureau Julie, Rastegari Armita, Kocaefe Duygu, Kocaefe Yasar S. et Darmstadt Hans. (2020). Additive selection for coal tar pitch modification in aluminium industry. Light Metals, 2020, p. 1329-1337.

Kocaefe Yasar S., Kocaefe Duygu, Bhattacharyay Dipankar, Benzaoui Abderrahmane et Desmeules Jean-François. (2020). Testing of SERMA technology on industrial anodes for quality control for aluminum production. Light Metals, 2020, p. 1189-1195.

Sun Hang, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Côté Jules et Coulombe Patrick. (2019). Colorimetric methods for determining Fe, V, and Ni contents in coke and anodes. Chemical Engineering Technology, 42, (5), p. 1011-1017.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2018). Étude de l’amélioration des propriétés des anodes par le brai modifié. The Canadian Journal of Chemical Engineering, 96, (8), p. 1697-1706.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2018). Modification of petroleum coke by different additives and the impact on anode properties. Canadian Journal of Chemical Engineering, 96, (8), p. 1707-1712.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as a raw material for carbon anode production. Energy Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as raw material for carbon anode production. Energy and Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Pichette André. (2018). Combined effect of acetylation and heat treatment on the physical, mechanical and biological behavior of jack pine (Pinus banksiana) wood. European Journal of Wood and Wood Products, 76, (2), p. 525-540.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2018). Modification des propriétés du brai de goudron de houille utilisé dans la fabrication des anodes. Canadian Journal of Chemical Engineering, 96, (2), p. 545-553.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2018). An advanced dynamic process model for industrial horizontal anode baking furnace. Applied Mathematical Modelling, 53, p. 384-399.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2018). Modification of coke by different additives to improve anode properties. Fuel, 211, p. 102-109.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Huang Xianai et Bhattacharyay Dipankar. (2017). The wettability of coke by pitches with different quinoline-insoluble contents. Fuel, 199, p. 587-597.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2017). A non-destructive technique for the on-line quality control of green and baked anodes. Metals, 7, (4), p. 128-138.

Amara Belkacem. (2017). Effet du soufre sur la réactivité des anodes en carbone. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Sanogo Bazoumana. (2017). Détection de la fin de la compaction des anodes par le son. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Coulombe Patrick. (2017). Evolution of anode properties during baking. International Journal of Innovative Science, Engineering & Technology, 4, (4), p. 301-309.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2017). An artificial neural network model for predicting the CO2 reactivity of carbon anodes used in the primary aluminum production. Neural Computing and Applications, 28, (3), p. 553-563.

Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sanogo Bazoumana, Ahoutou Yao, Sun Hang et Coulombe Patrick. (2017). Development of techniques and tools for the determination of carbon anode quality. Light Metals, p. 1247-1254.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Coulombe Patrick. (2017). Prediction of contact angle of coke-pitch system from raw material properties using artificial neural network. International Journal of Engineering Inventions, 6, (4), p. 42-52.

Feriani Houssemeddine. (2016). Étude de l’écoulement dans la cloison d’un four horizontal de cuisson d’anodes. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2016). Investigation of the refractory bricks used for the flue wall of the horizontal anode baking ring furnace. Ceramics International, 42, (16), p. 18436-18442.

Chamam Yasmine. (2016). Effet des paramètres de cuisson sur la qualité des anodes. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Interaction of bio-coke with different coal tar pitches. Fuel, 179, p. 179-192.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2016). Transient process model of open anode baking furnace. Applied Thermal Engineering, 107, p. 1253-1260.

Lu Ying. (2016). Effect of pitch properties on anode properties. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Wettability of bio-coke by coal tar pitch for its use in carbon anodes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 490, p. 133-144.

Kilic Saliha Meltem. (2016). Experimental study of the combined calcination and hydrodesulfurization of high-sulfur green petroleum coke. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Morais Brigitte. (2016). Characterization of cracking mechanisms of carbon anodes used in aluminum industry by optical microscopy and tomography. Journal of Materials Engineering and Performance, 25, (10), p. 4274-4282.

Andoh Marc Alain, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Marceau Daniel et Morais Brigitte. (2016). Measurement of the electric current distribution in an anode. Light Metals, p. 889-894.

Bureau Julie, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Quantification of sodium present in dry aggregates and anodes. Light Metals, p. 877-881.

Chamam Yasmine, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2016). Effect of heating rate during baking on the properties of carbon anodes used in aluminum industry. Light Metals, p. 947-951.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Characterization of carbon anode materials by image analysis. Light Metals, p. 859-864.

Huang Xianai, Kocaefe Duygu, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Coulombe Patrick. (2016). Investigation on the structure of carbonized pitch and calcined coke-carbonized pitch interface in carbon anodes by etching. Journal of Materials Research, 31, (22), p. 3513-3521.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Coulombe Patrick. (2016). Study of the wettability of coke by different pitches and their blends. Energy and Fuels, 30, (11), p. 9210-9216.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Morais Brigitte. (2016). Study of the wetting of coke by different pitches. Light Metals, p. 871-876.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Coulombe Patrick. (2016). Effect of coke granulometry on the properties of carbon anodes based on experimental study and ANN analysis. Journal of Materials Science Research, 5, (4), p. 63-78.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sarkar Dilip K. et Morais Brigitte. (2016). Effect of crystallinity on the wettability of petroleum coke by coal tar pitch. Energy & Fuels, 30, (4), p. 3549-3558.

Xie Yadian, Kocaefe Duygu, Chen Chunying et Kocaefe Yasar S.. (2016). Review of research on template methods in preparation of nanomaterials. Journal of Nanomaterials, p. 1-10.

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S., Cheng Johnathan et Liu Wei. (2016). The effect of novel synthetic methods and parameters control on morphology of nano-alumina particles. Nanoscale Research Letters, 11, (259),

Amrani Salah. (2015). Impact de la préparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses. Thèse de doctorat, Université du Québec à Chicoutimi.

Baiteche Mounir. (2015). Développement d'un modèle transitoire en 3D du four horizontal de cuisson d'anodes en carbone. Thèse de doctorat, Université du Québec à Chicoutimi.

Sarkar Arunima. (2015). Effect of coke properties on anode properties = Effet des propriétés du coke sur les propriétés d'anodes. Thèse de doctorat, Université du Québec à Chicoutimi.

Baiteche Mounir, Kocaefe Duygu, Kocaefe Yasar S., Marceau Daniel, Morais Brigitte et Lafrance Jacques. (2015). Description and applications of a 3D mathematical model for horizontal anode baking furnaces. Light Metals, p. 1115-1120.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2015). Comparison of linear multivariable, partial least square regression, and artificial neural network analyses to study the effect of different parameters on anode properties. Light Metals, p. 1129-1134.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Lafrance Jacques. (2015). Traceability of raw materials in silos in an anode plant. Light Metals, p. 1073-1078.

Kocaefe Yasar S., Kocaefe Duygu et Bhattacharyay Dipankar. (2015). Quality control via electrical resistivity measurement of industrial anodes. Light Metals, p. 1097-1102.

Oumarou Noura, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. (2015). A dynamic process model for predicting the performance of horizontal anode baking furnaces. Light metals, p. 1081-1086.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Dilip K., Bhattacharyay Dipankar, Morais Brigitte et Chabot Jérôme. (2014). Coke–pitch interactions during anode preparation. Fuel, 117, (part A), p. 598-607.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Blaney Gerry. (2014). Effect of heating rate on the crack formation during baking in carbon anodes used in aluminum industry. Light Metals, p. 1175-1180.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Arunima, Morais Brigitte et Chabot Jérôme. (2014). Characterization of dry aggregates in carbon anodes by image analysis. Light Metals, p. 1111-1114.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2014). 3D-modelling of conjugate heat and mass transfers: effects of storage conditions and species on wood high temperature treatment. International Journal of Heat and Mass Transfer, 79, p. 945-953.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Lagacé Charles-Luc. (2014). Determination of contact angle from raw material properties using linear multivariable analysis. Light Metals, p. 1099-1104.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2013). Determination of coke, pitch and pores/cracks in green anode by image analysis. Journal of Surface Engineered Materials and Advanced Technology, 3, p. 1-6.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Application of the artificial neural network (ANN) in predicting anode properties. Light Metals, p. 1189-1194.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). A model for predicting the electrical resistivity of baked anodes. Light Metals, p. 1195-1199.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Comparison of weathering behavior of heat-treated jack pine during different artificial weathering conditions. Dans : 4th International Conference on Fluid Mechanics and Heat & Mass Transfer (FLUIDSHEAT'13) , June 25-27, 2013, Dubrovnik, Croatia.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Study of the degradation of heat-treated jack pine under different artificial weathering conditions. International Journal of Energy and Environment, 7, (3), p. 97-106.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Quantitative characterization of chemical degradation of heat-treated wood surfaces during artificial weathering using XPS. Surface and Interface Analysis, 45, (2), p. 639-649.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Study of weathering behavior of jack pine heat-treated under different conditions. Journal of Energy and Power Engineering, 7, p. 818-826.

Kocaefe Duygu, Kocaefe Yasar S., Younsi Ramdane, Oumarou Noura et Lekounougou S. Thierry. (2013). Mathematical modelling of the high temperature treatment of birch in a prototype furnace. Advances in Mechanical Engineering, 5,

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. (2013). Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Journal of Energy and Power Engineering, 7, p. 1198-1205.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interaction between coke and pitch in anode manufacturing. Light Metals, p. 1045-1050.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interactions between coke and pitch in anode manufacturing. Dans Barry A. Sadler (dir.), Light Metals 2013. (p. 1045-1050). The Minerals, Meatls & Materials Series. Switzerland AG : Springer, Cham.

Kocaefe Duygu, Xie Yadian, Kocaefe Yasar S., Wei Liu, Zou Shaoling et Wu Anjing. (2013). Thermogravimetric study on devolatilization kinetics of Chinalco anodes during baking. Journal of Materials Science Research, 2, (2), p. 22-34.

Kocaefe Yasar S., Oumarou Noura, Baiteche Mounir, Kocaefe Duygu, Morais Brigitte et Gagnon Marc. (2013). Use of mathematical modelling to study the behavior of a horizontal anode baking furnace. Light Metals, p. 1139-1144.

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S. et Wei Liu. (2013). Correlation between anode recipe and anode properties. International Journal of Engineering and Innovative Technology, 2, (8), p. 23-27.

Huang Xianai, Kocaefe Duygu, Boluk Yaman, Kocaefe Yasar S. et Pichette André. (2012). Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids. European Journal of Wood and Wood Products, 70, (5), p. 711-717.

Huang Xianai. (2012). Study on the degradation mechanism of heat-treated wood by UV light. Thèse de doctorat, Université du Québec à Chicoutimi.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Changes in wettability of heat-treated wood due to artificial weathering. Wood Science and Technology, 46, (6), p. 1215-1237.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). A spectrocolorimetric and chemical study on color modification of heat-treated wood during artificial weathering. Applied Surface Science, 258, (14), p. 5360-5369.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Study of the degradation behavior of heat-treated jack pine (Pinus banksiana) under artificial sunlight irradiation. Polymer Degradation and Stability, 97, (7), p. 1197-1214.

Xie Yadian. (2012). Correlation between anode manufacturing process and anode reactivity for CHALCO plant in Guizhou, China. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. (2011). Recipe adaptation and new recipe development for high temperature heat treatment of North American wood species. International Journal of Energy, Environment, and Economics, 19, (3), p. 257-278.

Lekounougou S. Thierry, Kocaefe Duygu, Oumarou Noura, Kocaefe Yasar S. et Poncsák Sándor. (2011). Effect of thermal modification on mechanical properties of Canadian White Birch (Betula papyrifera). International Wood Products Journal, 2, (2), p. 101-107.

Osma Afet Aysegül. (2005). Mathematical modelling of the thermal treatment of wood at high temperatures = Modélisation mathématique du traitement thermique du bois à haute température. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Kocaefe Yasar S.. (2003). Modélisation et optimisation des fours à puits latéral = Modelling and optimisation of sidewell fournaces. Thèse de doctorat, Université du Québec à Chicoutimi.

Murray-Chiasson Audrey. (2002). Étude de la relâche des inclusions lors de la filtration de l'aluminium liquide. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bui Rung-Tien, Simard G., Charette André, Kocaefe Yasar S. et Perron Jean. (1995). Mathematical modeling of the rotary coke calcining kiln. The Canadian Journal of Chemical Engineering, 73, (4), p. 534-545.

Simard Guy. (1992). La modélisation de la combustion dans un four de calcination de coke de pétrole. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bui Rung-Tien, Simard G., Kocaefe Yasar S., Charette André, Lacroix M., Jain S., Perron Jean, Proulx André L. et Barr P. V.. (1991). 3D-simulation of the thermal performance of a coke calcining kiln. International Symposium on Extraction, Refining and Fabrication of Light Metals, 24, p. 307-314.

Haidekker Andras. (1991). Radiation modelling in complex three dimensional enclosures. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Blainey Jerry. Quantitative evaluation of the cracking of carbon anodes by image analysis for aluminum industry. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Baiteche Mounir, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. A 3D mathematical model of a horizontal anode baking furnace as a design tool. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. A non-destructive technique for the on-line quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Desmeules Jean-François. An experimental testing of the SERMA technology for the quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. Study of the effect of granulometry on coke bulk density using artificial neural network. Dans : Materials Science & Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Morphological and microstructural characterization of bio-coke as potential anode raw material for aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Method for analyzing an anode and device thereof. .

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. Study on the surface changes of heat-treated aspen wood due to aging by different techniques. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. Study of weathering behavior of jack pine heat-treated under different conditions. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. Measurement of anode electrical resistivity for quality control in aluminium industry. Dans : 53rd annual Conference of Metallurgists , 28 September -1 October 2014, Vancouver, British Colombia.

Kocaefe Duygu, Kocaefe Yasar S. et Oumarou Noura. A novel high temperature heat treatment process for wood. Dans : 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 20-23 July 2015, South Africa.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Sarkar Arunima, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. Utilization of artificial neural network to analyze and predict the influence of different parameters on anode properties. Dans : 11th Australasian Aluminium Smelting Technology Conference , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. Modelling of high temperature heat treatment of wood using thermowood technology. Dans : 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 19-21 July 2010, Antalya, Turkey.

Kocaefe Yasar S., Baiteche Mounir, Oumarou Noura, Kocaefe Duygu et Morais Brigitte. Different mathematical modelling approaches to predict the horizontal anode baking furnace performance. Dans : 11th Australasian Aluminium Smelting Technology , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Yasar S., Kocaefe Duygu et Gauthier Bruno. Impact of the form of a trailer on its aerodynamic performance. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Yasar S., Oumarou Noura et Kocaefe Duygu. Comparison of the 1D and 3D models for the simulation of wood heat treatment process. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Yasar S., Simard G., Bui Rung-Tien, Charette André, Potocnik Vinko et Perron Jean. Analyzing the heat transfer in a coke calcining kiln. Dans : Light metals 1992 : proceedings of the technical sessions presented by the TMS Light Metals Committee at the 121st TMS annual meeting , March 1-5, 1992, San Diego, California.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Chabot Jérôme. A dynamic process model for simulating horizontal anode baking furnaces. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Pouliot Martin. Characterization of petroleum coke and butts used in anode manufacturing in aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.