Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Documents publiés par "Larouche, Daniel"

Exporter comme [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Regroupement : Aucun | Type de document | Date
Nombre de documents : 17.

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2023). Temperature dependence of elastic properties of Al-Mg-Si direct-Chill-cast AA6111 alloy at near-solidus temperatures. Journal of Materials Engineering and Performance,

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2022). Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys. Journal of Materials Science,

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi, Chen X-Grant et Massinon Denis. (2022). Modelling of strain-controlled thermomechanical fatigue testing of cast AlSi7Cu3.5Mg0.15 (Mn, Zr, V) alloy for different aging conditions. Metals, 12, e1258.

Rakhmonov Jovid, Qassem Mohamed, Larouche Daniel, Liu Kun, Javidani Mousa, Colbert Josée et Chen X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi et Chen X-Grant. (2019). Evaluation of the growth kinetics of θ′ and θ-Al2Cu precipitates in a binary Al-3.5 Wt Pct Cu alloy. Metallurgical and Materials Transactions A, 50, (7), p. 3048-3060.

Heugue Pierre, Larouche Daniel, Breton Francis, Massinon Denis, Martinez Rémi et Chen X-Grant. (2019). Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu3.5Mg0.15 cast alloy with Zr and V additions. Metals, 9, (7), e777.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Javidani Mousa. (2015). Effect of Cu, Mg and Fe on solidification processing and microstructure evolution of Al-7Si based foundry alloys. Thèse de doctorat, Université Laval.

Larouche Daniel et Javidani Mousa. (2015). Mathematical analysis of the heat measured by a power-compensated differential scanning calorimeter during the solidification of a multiphase alloy. Journal of Thermal Analysis and Calorimetry, 122, (1), p. 197-205.

Javidani Mousa et Larouche Daniel. (2014). Application of cast Al–Si alloys in internal combustion engine components. International Materials Reviews, 59, (3), p. 132-158.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Farkoosh Amir Rezaei, Javidani Mousa, Hoseini M., Larouche Daniel et Pekguleryuz M.. (2013). Phase formation in as-solidified and heat-treated Al–Si–Cu–Mg–Ni alloys: Thermodynamic assessment and experimental investigation for alloy design. Journal of Alloys and Compounds, 551, p. 596-606.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2012). Mechanical properties of aluminium-copper B206 alloys with iron and silicon additions. International Journal of Cast Metals Research, 25, (1), p. 15-25.

Kamguo Kamga Honoré. (2010). Influence of alloying elements iron and silicon on mechanical properties of aluminum-copper type B206 alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Hot tearing of aluminum-copper B206 alloys with iron and silicon additions. Materials Science and Engineering A : Structural Materials: Properties, Microstructure and Processing, 527, (27-28), p. 7413-7423.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Solidification of aluminum-copper B206 alloys with iron and silicon additions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, (11), p. 2844-2855.

Cette liste a été générée le Thu Mar 28 02:32:58 2024 EDT.

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630