LiveZilla Live Chat Software

Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Evolution of mechanical properties of carbon anodes during baking

Kallel Walid, Marceau Daniel, Kocaefe Duygu, Girard Pierre-Luc, Racine Dany et Coulombe Patrick. Evolution of mechanical properties of carbon anodes during baking. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

[img] Doc - Version acceptée
3MB
[img]
Prévisualisation
PDF - Version acceptée
346kB

Résumé

To be considered as a good quality product, carbon anodes must not only have a low electrical resistivity, but also a high mechanical resistance to crack generation and propagation. To obtain such anodes, a good understanding of the evolution of their mechanical properties during baking is crucial. Traditional mechanical characterization approaches consist of baking anode samples at specific temperatures and performing the tests at either room temperature or slightly lower than that of the baking level. In the latter case, it is well-known that numerous chemical reactions take place during the tests which affect the results. In this paper, an innovative approach is proposed to ensure the reliability of mechanical properties measurements. The anode cores were taken from industrial green anodes removed directly from the production line of Aluminerie Alouette Inc. (AAI) and then baked to different temperatures in a laboratory furnace of the UQAC/AAI Chair. Compression tests initially performed using the Gleeble system showed that this system was not suitable for low temperature testing, at which the anode samples were in a semi-solid state. To overcome this problem, a new setup was installed on a classical CRIMS press which accurately measures the Young’s modulus, compressive strength, and particularly, Poison’s ratio.

Type de document:Matériel de conférence (Non spécifié)
Sujets:Sciences naturelles et génie > Génie > Génie des matériaux et génie métallurgique
Département, module, service et unité de recherche:Départements et modules > Département des sciences appliquées > Module d'ingénierie
Mots-clés:carbon anodes, baking process, mechanical properties, high temperature mechanical property testing
Déposé le:22 mars 2019 00:23
Dernière modification:22 mars 2019 00:23
Afficher les statistiques de telechargements

Éditer le document (administrateurs uniquement)

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630