LiveZilla Live Chat Software

Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy

Elashri A., Elgallad E. M., Parson Nick et Chen X-Grant. (2021). Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy. Journal of Materials Engineering and Performance, 30, p. 7851-7862.

[img] PDF - Version acceptée
Administrateurs seulement jusqu´à 1 Juin 2022.

4MB

URL officielle: http://dx.doi.org/doi:10.1007/s11665-021-05917-8

Résumé

The precipitation behavior of Zr-bearing dispersoids in an Al-0.8%Mg-1.0%Si alloy was investigated for different homogenization treatments (450-550 °C). The effect on the recrystallization resistance of the alloy was also studied during post-deformation annealing. With an addition of 0.2 wt.% Zr, two different Zr-bearing dispersoids were observed depending on the homogenization conditions. Homogenization at 450 °C for 2 h resulted in the precipitation of fine and dense L12-Al3Zr dispersoids (8-10 nm), which were found to be coherent with the matrix. In contrast, extended homogenization times, such as 12 h at 450 °C, or increasing the homogenization temperature to 500-550 °C produced elongated DO22-(Al,Si)3Zr dispersoids with a larger size. During hot compression testing, the addition of 0.2 wt.% Zr combined with homogenization at 450 °C increased the high-temperature flow stress by 20% relative to the base alloy free of Zr, revealing their potential to inhibit dislocation motion and dynamic recovery. Both dispersoids were found to have positive impact on the retardation of recrystallization during post-deformation annealing, but the fine and coherent Al3Zr dispersoids were more effective than the coarse and incoherent (Al,Si)3Zr dispersoids.

Type de document:Article publié dans une revue avec comité d'évaluation
Volume:30
Pages:p. 7851-7862
Version évaluée par les pairs:Oui
Date:1 Juin 2021
Sujets:Sciences naturelles et génie > Génie
Sciences naturelles et génie > Génie > Génie des matériaux et génie métallurgique
Sciences naturelles et génie > Sciences appliquées
Département, module, service et unité de recherche:Départements et modules > Département des sciences appliquées > Module d'ingénierie
Mots-clés:Al-mg-si alloys, homogenization, hot deformation, recrystallization, Zr dispersoids, alliages Al-mg-si, homogénéisation, déformation à chaud, recristallisation, dispersoïdes de Zr
Déposé le:21 oct. 2021 20:56
Dernière modification:21 oct. 2021 20:56
Afficher les statistiques de telechargements

Éditer le document (administrateurs uniquement)

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630