Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Résumé

Application of low pour point esters in transformers insulation serving in cold climatic regions is still a challenge. To address this concern, the pre-breakdown and breakdown analyses of thermally aged low pour point ester fluids are investigated. The breakdown measurements are performed at different aging conditions under AC stress. Needle-plane electrode geometry (with varying radii of the tip) is employed since this configuration is necessary for any practical diagnostic based on partial discharge (PD). This allows studying the effect of the chemical impurities (aging by-products) as assessed by some physicochemical properties (acidity, particles count, turbidity, and dissolved decay products) on the partial discharge and breakdown characteristics. The complete analysis is carried out for liquids having the pour points less than -50 °C, including a mineral oil (MO) and two synthetic ester liquids (SE1 and SE2). Changes in the streamer properties, such as partial discharge inception voltage (PDIV), breakdown-streamer inception voltage, and breakdown voltage are reported as a function of the needle tip radius and aging condition. It is observed that the breakdown properties of SE1 are better than that of SE2 and are comparable to MO. To understand the influence of aging on the PD, correlations between decay products, acidity, BSIV, and PDIV are reported. It is observed that the acidity and concentration of decay products directly impact the PD characteristics.