Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Ahmed, Mohamed. (2024). Developing novel high strength 4xxx filler alloys for aluminum fusion welding of AA6xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Ahmed, Mohamed, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2023). Welding of AA6061-T6 Sheets Using High-Strength 4xxx Fillers: Effect of Mg on Mechanical and Fatigue Properties. Materials, 16, (10), e3832.

Ahmed, Mohamed, Javidani, Mousa, Mirakhorli, Fatemeh, Maltais, Alexandre et Chen, X-Grant. (2022). Developing High-Strength Al-Si-Mg Filler Metals for Aluminum Fusion Welding. Journal of Materials Engineering and Performance,

Algendy, Ahmed Y., Javidani, Mousa, Khangholi, Siamak Nikzad, Pan, Lei et Chen, X.-Grant. (2023). Enhanced Mechanical Strength and Electrical Conductivity of Al–Ni‐Based Conductor Cast Alloys Containing Mg and Si. Advanced Engineering Materials, e2301241.

Farkoosh, Amir Rezaei, Javidani, Mousa, Hoseini, M., Larouche, Daniel et Pekguleryuz, Mihriban. (2013). Phase formation in as-solidified and heat-treated Al–Si–Cu–Mg–Ni alloys: Thermodynamic assessment and experimental investigation for alloy design. Journal of Alloys and Compounds, 551, p. 596-606.

Heidarzadeh, Akbar, Javidani, Mousa, Mofarrehi, Mohammadreza, Farzaneh, Amir et Chen, X-Grant. (2021). Submerged dissimilar friction stir welding of AA6061 and AA7075 aluminum alloys: microstructure characterization and mechanical property. Metals, 11, (10), e1592.

Heidarzadeh, Akbar, Javidani, Mousa, Mofarrehi, Mohammadreza, Motalleb-nejad, Pouyan, Mohammadzadeh, Roghayeh, Jafarian, Hamidreza et Chen, X-Grant. (2023). Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials, 16, (3), e944.

Heidarzadeh, Akbar, Khorshidi, Mahsa, Mohammadzadeh, Roghayeh, Khajeh, Rasoul, Mofarrehi, Mohammadreza, Javidani, Mousa et Chen, X-Grant. (2023). Multipass friction stir processing of laser-powder bed fusion AlSi10Mg: microstructure and mechanical properties. Materials, 16, e1559.

Javidani, Mousa. (2015). Effect of Cu, Mg and Fe on solidification processing and microstructure evolution of Al-7Si based foundry alloys. Thèse de doctorat, Université Laval.

Javidani, Mousa, Arreguin-Zavala, J., Danovitch, J., Tian, Y. et Brochu, M.. (2017). Additive manufacturing of AlSi10Mg alloy using direct energy deposition: microstructure and hardness characterization. Journal of Thermal Spray Technology, 26, (4), p. 587-597.

Javidani, Mousa, Fortier, Martin et Colbert, Josée. (2019). Impact of the main casting process parameters on floating crystals in Al alloy DC-Cast ingots. Dans : Light Metals 2019 TMS Annual Meeting & Exhibition , March 10-14, 2019, San Antonio, Texas.

Javidani, Mousa et Larouche, Daniel. (2014). Application of cast Al–Si alloys in internal combustion engine components. International Materials Reviews, 59, (3), p. 132-158.

Javidani, Mousa, Larouche, Daniel et Chen, X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Javidani, Mousa, Larouche, Daniel et Chen, X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Javidani, Mousa, Larouche, Daniel et Chen, X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Khangholi, Siamak Nikzad, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2022). Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments. Journal of Alloys and Compounds, 914, e165242.

Khangholi, Siamak Nikzad, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2022). Review on recent progress in Al–Mg–Si 6xxx conductor alloys. Journal of Materials Research, 37, (3), p. 670-691.

Larouche, Daniel et Javidani, Mousa. (2015). Mathematical analysis of the heat measured by a power-compensated differential scanning calorimeter during the solidification of a multiphase alloy. Journal of Thermal Analysis and Calorimetry, 122, (1), p. 197-205.

Meysami, A. H., Ghasemzadeh, R., Seyedein, S. H., Aboutalebi, M. R., Ebrahimi, R. et Javidani, Mousa. (2009). Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching. Journal of Iron and Steel Research International, 16, (6), p. 47-51.

Mofarrehi, Mohammadreza, Javidani, Mousa et Chen, X-Grant. (2021). On the intermetallic constituents in the sodium-induced edge cracking of hot-rolled AA5182 aluminum alloys. Philosophical Magazine, 101, (16), p. 1849-1870.

Muhammed, Musa. (2025). Tribological performance enhancement of AlTiN/AlTiCrN-based physical vapour deposition coatings for wood-processing application. Thèse de doctorat, Université du Québec à Chicoutimi.

Nikzad Khangholi, Siamak, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2021). Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys. Materials Science and Engineering: A, 820, p. 141538.

Nikzad Khangholi, Siamak, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2020). Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels. Dans : The 17th International Conference on Aluminium Alloys 2020 (ICAA17) , October 26-29, 2020, Grenoble, France.

Nikzad Khangholi, Siamak, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2020). Optimization of mechanical properties and electrical conductivity in Al–Mg–Si 6201 alloys with different Mg/Si ratios. Journal of Materials Research, 35, (20), p. 2765-2776.

Qassem, Mohamed, Javidani, Mousa, Larouche, Daniel, Colbert, Josée et Chen, X-Grant. (2022). Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys. Journal of Materials Science,

Qassem, Mohamed, Javidani, Mousa, Larouche, Daniel, Colbert, Josée et Chen, X-Grant. (2023). Temperature dependence of elastic properties of Al-Mg-Si direct-Chill-cast AA6111 alloy at near-solidus temperatures. Journal of Materials Engineering and Performance,

Rakhmonov, Jovid, Qassem, Mohamed, Larouche, Daniel, Liu, Kun, Javidani, Mousa, Colbert, Josée et Chen, X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Tremblay, Xavier. (2025). Solidification of hypoeutectic Al-Si alloys during high-pressure vacuum die-casting (HPVDC) of thin-walled components & the influence of subsurface microstructure variations on bending ductility. Mémoire de maîtrise, Université du Québec à Chicoutimi.