Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Article publié dans une revue avec comité d'évaluation

Algendy, Ahmed Y., Liu, Kun et Chen, X-Grant. (2021). Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy. Materials Characterization, 181, e111487.

Algendy, Ahmed Y., Liu, Kun et Chen, X-Grant. (2020). Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels. MATEC Web of Conferences, 326, e02002.

Algendy, Ahmed Y., Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2022). Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys. Materials Science and Engineering: A, 855, e143950.

Algendy, Ahmed Y., Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2022). Evolution of discontinuous/continuous Al3(Sc,Zr) precipitation in Al-Mg-Mn 5083 alloy during thermomechanical process and its impact on tensile properties. Materials Characterization, 192, e112241.

Bolouri, Amir, Liu, Kun et Chen, X-Grant. (2016). Effects of iron-rich intermetallics and grain structure on semisolid tensile properties of Al-Cu 206 cast alloys near solidus temperature. Metallurgical and Materials Transactions A,

Chen, Sinan, Liu, Kun et Chen, X-Grant. (2019). Precipitation behavior of dispersoids and elevated-temperature properties in Al–Si–Mg foundry alloy with Mo addition. Journal of Materials Research, 34, (18), p. 3071-3081.

Chen, Zhixing, Elgallad, Emad M., Liu, Kun et Chen, X-Grant. (2022). Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions. Metallography, Microstructure, and Analysis,

Chen, Zhixing, Liu, Kun, Elgallad, Emad M., Breton, Francis et Chen, X-Grant. (2020). Differential scanning calorimetry fingerprints of various heat-treatment tempers of different aluminum alloys. Metals, 10, (6), e763.

Elgallad, E. M., Liu, Kun, Zhang, Zhan et Chen, X-Grant. (2020). Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy. Philosophical Magazine, 101, (1), p. 96-116.

Hu, Peng, Liu, Kun, Pan, Lei et Chen, X-Grant. (2022). Effect of Mg microalloying on elevated-temperature creep resistance of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 851, e143649.

Hu, Peng, Liu, Kun, Pan, Lei et Chen, X-Grant. (2023). Effects of individual and combined additions of transition elements (Zr, Ti and V) on the microstructure stability and elevated-temperature properties of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 867, e144718.

Jin, L., Liu, Kun et Chen, X-Grant. (2020). Improved elevated temperature properties in Al-13%Si piston alloys by Mo addition. Journal of Materials Engineering and Performance, 29, (1), p. 126-134.

Jin, Lanfeng, Liu, Kun et Chen, X-Grant. (2020). Evolution of dispersoids and their effects on elevated-temperature strength and creep resistance in Al-Si-Cu 319 cast alloys with Mn and Mo additions. Materials Science and Engineering: A, 770, p. 138554.

Jin, Lanfeng, Liu, Kun et Chen, X-Grant. (2019). Evolution of Fe-Rich intermetallics in Al-Si-Cu 319 cast alloy with various Fe, Mo, and Mn contents. Metallurgical and Materials Transactions B, 50, (4), p. 1896-1907.

Li, Chen, Liu, Kun et Chen, X-Grant. (2020). Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology, 39, p. 135-143.

Li, Dong, Liu, Kun et Chen, X-Grant. (2023). Evolution of Microstructure and Elevated-Temperature Properties during Thermal Exposure with Transition Elements (V, Zr and Mo) in Al–Si 356 Type Cast Alloys. MATERIALS TRANSACTIONS, 64, (2), p. 406-413.

Li, Dong, Liu, Kun et Chen, X-Grant. (2020). Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02003),

Li, Dong, Liu, Kun, Rakhmonov, Jovid et Chen, X-Grant. (2021). Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys. Materials Science and Engineering: A, 827, e142090.

Liu, Kun et Chen, X-Grant. (2015). Development of Al-Mn-Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening. Materials and Design, 84, p. 340-350.

Liu, Kun et Chen, X-Grant. (2015). Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys. Metallurgical and Materials Transactions B,

Liu, Kun et Chen, X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

Liu, Kun et Chen, X-Grant. (2018). Improvement in elevated-temperature properties of Al–13% Si piston alloys by dispersoid strengthening via Mn addition. Journal of Materials Research, 33, (20), p. 3430-3438.

Liu, Kun et Chen, X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

Liu, Kun et Chen, X-Grant. (2019). Influence of the modification of iron-bearing intermetallic and eutectic Si on the mechanical behavior near the solidus temperature in Al-Si-Cu 319 cast alloy. Physica B: Condensed Matter, 560, p. 126-132.

Liu, Kun, Elgallad, Emad, Li, Chen et Chen, X-Grant. (2021). Effects of Zr and Sc additions on precipitation of α-Al(FeMn)Si dispersoids under various heat treatments in Al–Mg–Si AA6082 alloys. International Journal of Materials Research, 112, (9), p. 706-716.

Liu, Kun, Li, Chen et Chen, X-Grant. (2020). Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (03001),

Liu, Kun, Ma, Hezhaoye et Chen, X-Grant. (2017). Enhanced elevated-temperature properties via Mo addition in Al-Mn-Mg 3004 alloy. Journal of alloys and compounds, 694, p. 354-365.

Liu, Kun, Ma, Hezhaoye et Chen, X-Grant. (2018). Improving the Elevated-Temperature Properties by Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys. Metallurgical and Materials Transactions B, 49, (4), p. 1588-1596.

Liu, Kun, Mirza, Foisal Ahmed et Chen, X-Grant. (2018). Effect of overaging on the cyclic deformation behavior of an AA6061 aluminum alloy. Metals, 8, (7), e528.

Liu, Kun, Nabawy, Ahmed et Chen, X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Liu, Kun, Wang, Shuai, Hu, Peng, Pan, Lei et Chen, X-Grant. (2023). Improved Thermo-Mechanical Fatigue Resistance of Al-Si-Cu 319 Alloys by Microalloying with Mo. Materials, 16, (9), e3515.

Liu, Kun, Wang, Shuai, Pan, Lei et Chen, X-Grant. (2023). Thermo-Mechanical fatigue behavior and resultant microstructure evolution in Al-Si 319 and 356 cast alloys. Materials, 16, (2), p. 829.

Ma, K., Li, X. N., Liu, Kun, Chen, X-Grant, Liu, Z. Y., Xiao, B. L. et Ma, Zheyuan. (2021). Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones. Composites Part B: Engineering, 222, e109094.

Ma, K., Liu, Z. Y., Liu, Kun, Chen, X-Grant, Xiao, B. L. et Ma, Zheyuan. (2021). Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon, 178, p. 190-201.

Pan, Lei, Liu, Kun, Breton, Francis et Chen, X-Grant. (2016). Effect of Fe on microstructure and properties of 8xxx aluminum conductor alloys. Journal of Materials Engineering and Performance, 25, (12), p. 5201-5208.

Pan, Lei, Liu, Kun, Breton, Francis et Chen, X-Grant. (2017). Effects of minor Cu and Mg additions on microstructure and material properties of 8xxx aluminum conductor alloys. Journal of Materials Research, 32, (6), p. 1094-1104.

Pan, Lei, Mirza, Foisal Ahmed, Liu, Kun et Chen, X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Rakhmonov, Jovid, Liu, Kun et Chen, X-Grant. (2020). Effects of compositional variation on the thermal stability of θ′-Al2Cu precipitates and elevated-temperature strengths in Al-Cu 206 alloys. Journal of Materials Engineering and Performance, 29, (11), p. 7221-7230.

Rakhmonov, Jovid, Liu, Kun, Pan, Lei, Breton, Francis et Chen, X-Grant. (2020). Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg. Journal of Alloys and Compounds, 827, (154305),

Rakhmonov, Jovid, Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2021). Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content. Journal of Alloys and Compounds, 861, p. 157937.

Rakhmonov, Jovid, Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2021). Enhanced elevated-temperature strength and creep resistance of dispersion-strengthened Al-Mg-Si-Mn AA6082 alloys through modified processing route. Materials, 14, (19), e5489.

Rakhmonov, Jovid, Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2020). Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high-temperature exposure through dispersoid strengthening. Materials, 13, (22), p. 5295.

Rakhmonov, Jovid, Qassem, Mohamed, Larouche, Daniel, Liu, Kun, Javidani, Mousa, Colbert, Josée et Chen, X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Matériel de conférence

Chen, Sinan, Liu, Kun et Chen, X-Grant. (2019). Elevated-temperature low-cycle fatigue behaviors of Al-Si 356 and 319 foundry alloys. Dans : TMS-Light Metals 2019 , March 10-14, San Antonio, Texas.

Liu, Kun, Cao, X., Bolouri, Amir et Chen, X-Grant. (2019). Effect of Fe-rich intermetallics on tensile behavior of Al-Cu 206 cast alloys at solid and near-solid states. Dans : TMS-2019 Shape Casting: 7th International Symposium celebrating Prof. John Campbell’s 80 th Birthday , March 10-14, San Antonio, Texas.

Thèse ou mémoire de l'UQAC

Algendy, Ahmed. (2022). Precipitation behaviors of Mn-bearing dispersoids and Al3(Sc,Zr) precipitates and their impacts on the microstructure and mechanical properties of rolled Al-Mg-Mn 5xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Chen, Sinan. (2018). Effet de l’addition de molybdène et des conditions de traitement thermique sur l’évolution des dispersoïdes et les propriétés de température élevée de l’alliage de fonderie A356. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen, Zhixing. (2019). L'identification de la calorimétrie à balayage différentiel (DSC) des conditions de traitement thermique des alliages d'aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Hu, Peng. (2023). Elevated-temperature mechanical, creep and fatigue behavior of aluminum-copper cast aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Jin, Lanfeng. (2019). Development of Al–Si cast alloys for elevated-temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Li, Chen. (2018). Precipitation behaviors of dispersoids induced from transition elements (Mn, Sc and Zr) and their effect on recrystallization resistance in AA6082 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Cong. (2022). Relationship between thermal conductivity and electrical conductivity in B4C particle reinforced aluminum matrix composites. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Dong. (2020). Effet des éléments de transition sur les comportements de précipitation des dispersoïdes/précipités et les propriétés à haute température des alliages coulés Al-Si et Al-Cu. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Liu, Kun. (2012). Solidification of iron-rich intermetallic phases and their effects on tensile properties in Al-Cu 206 cast alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Wang, Zimeng. (2023). Evolution of microstructure and mechanical properties during elevated-temperature thermal exposure with Si and transition elements additions in Al-Cu 224 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.