LiveZilla Live Chat Software

Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching

Meysami A. H., Ghasemzadeh R., Seyedein S. H., Aboutalebi M. R., Ebrahimi R. et Javidani Mousa. (2009). Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching. Journal of Iron and Steel Research International, 16, (6), p. 47-51.

Le texte intégral n'est pas disponible pour ce document.

URL officielle: http://dx.doi.org/doi:10.1016/S1006-706X(10)60026-...

Résumé

Direct quenching and tempering (DQ-T) of hot rolled steel section has been widely used in steel mill for the sake of improvement of mechanical properties and energy saving. Temperature history and microstructural evolution during hot rolling plays a major role in the properties of direct quenched and tempered products. The mathematical and physical modeling of hot forming processes is becoming a very important tool for design and development of required products as well as predicting the microstructure and the properties of the components. These models were mostly used to predict austenite grain size (AGS), dynamic, meta-dynamic and static recrystallization in the rods immediately after hot rolling and prior to DQ process. The hot compression tests were carried out on 42CrMo4 steel in the temperature range of 900–1 100 °C and the strain rate range of 0. 05–1 s−1 in order to study the high temperature softening behavior of the steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experimental results, the dynamic recrystallization fraction (DRX), AGS, hot deformation and activation energy behavior were investigated. It was found that the calculated results were in good agreement with the experimental flow stress and microstructure of the steel for different conditions of hot deformation.

Type de document:Article publié dans une revue avec comité d'évaluation
ISSN:1006-706X
Volume:16
Numéro:6
Pages:p. 47-51
Version évaluée par les pairs:Oui
Date:1 Juin 2009
Identifiant unique:10.1016/S1006-706X(10)60026-X
Sujets:Sciences naturelles et génie
Sciences naturelles et génie > Génie > Génie des matériaux et génie métallurgique
Sciences naturelles et génie > Sciences appliquées
Département, module, service et unité de recherche:Départements et modules > Département des sciences appliquées > Module d'ingénierie
Mots-clés:42CrMo4 steel, hot compression test, dynamic recrystallization, hot deformation, direct quenching, physical simulation, acier 42CrMo4, test de compression à chaud, recristallisation dynamique, déformation à chaud, trempe directe, simulation physique
Déposé le:01 mars 2021 22:16
Dernière modification:01 mars 2021 22:16
Afficher les statistiques de telechargements

Éditer le document (administrateurs uniquement)

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630