LiveZilla Live Chat Software

Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Documents dans le département, le module, le service ou l'unité de recherche "Départements et modules > Département des sciences appliquées > Module d'ingénierie"

Monter d'un niveau
Exporter comme [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Regroupement : Aucun | Auteur | Type de document | Date
Nombre de documents archivés : 818.

(2018). Engineering dielectric liquid applications. Basel, Switzerland : MDPI.

(2018). Power transformer diagnostics, monitoring and design features. Basel, Switzerland : MDPI.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver–polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver−polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Ahmed Hassan Yousif, Zeghid Medien, Imtiaz Waqas A., Sharma Teena et Chehri Abdellah. (2020). An efficient 2D encoding/decoding technique for optical communication system based on permutation vectors theory. Multimedia Systems,

Ahmed Hassan Yousif, Zeghid Medien, Imtiaz Waqas A., Sharma Teena, Chehri Abdellah et Fortier Paul. (2020). Two-dimensional permutation vectors’ (PV) code for optical code division multiple access systems. Entropy, 22, (5), p. 576.

Ahmed Imran, Jeon Gwanggil, Chehri Abdellah et Hassan Mohammad Mehedi. (2021). Adapting Gaussian YOLOv3 with transfer learning for overhead view human detection in smart cities and societies. Sustainable Cities and Society, 70, e102908.

Akbari Ali Akbar, Setayeshmehr A., Borsi H., Gockenbach E. et Fofana Issouf. (2010). Intelligent agent-based system using dissolved gas analysis to detect incipient faults in power transformers. IEEE Electrical Insulation Magazine, 26, (6), p. 27-40.

Akkal Hatim, Volat Christophe et Farzaneh Masoud. (2013). Improving electrical performance of EHV post station insulators under severe icing conditions using modified grading rings. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (1), p. 221-228.

Alameh Abdul Hafiz, Gratuze Mathieu, Robichaud Alexandre et Nabki Frederic. (2018). Study and design of MEMS cross-shaped piezoelectric vibration energy harvesters. 25th IEEE International Conference on Electronics, Circuits and Systems (ICECS), 2018, (18420438), p. 305-308.

Alameh Abdul Hafiz, Robichaud Alexandre et Nabki Frederic. (2014). A reconfigurable charge pump in 0.13 μm CMOS for agile MEMS actuation. Dans 2014 International Conference on Electronics and Communication Systems (ICECS). (2014, p. 670-673). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Alarie Jonathan, Roger Thomas, Kiss László, Poncsák Sándor, Guérard Sébastien et Bilodeau Jean-François. (2020). Validation of the gravimetric method to properly follow alumina dissolution in cryolitic bath. Light Metals, 2020, p. 680-687.

Allahdini Anahaita, Momen Gelareh et Jafari Reza. (2019). Fabrication of a durable superhydrophobic coating for high voltage glass insulators. (2019, 2019, ). Montréal, Qc : CIGRE Canada.

Amara Belkacem, Faouzi Fatima-Ezzahra, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2021). Modification of biocoke destined for the fabrication of anodes used in primary aluminum production. Fuel, 304, e121352.

Amirkhan F., Robichaud Alexandre, Ropagnol X., Gratuze M., Ozaki T., Nabki F. et Blanchard F.. (2020). Active terahertz time differentiator using piezoelectric micromachined ultrasonic transducer array. Optics Letters, 45, (13), p. 3589-3592.

Amirkhan F., Robichaud Alexandre, Ropagnol X., Gratuze M., Ozaki T., Nabki F. et Blanchard F.. (2020). Simulation study of a piezoelectric micromachined ultrasonic transducer as terahertz differentiator. Dans OSA Advanced Photonics Congress (AP) 2020 (IPR, NP, NOMA, Networks, PVLED, PSC, SPPCom, SOF). (2020, ). Washington, D.C. : The Optical Society.

Amrani M.L., Bouazabia S., Fofana Issouf, Meghnefi Fethi et Jabbari Marouane. (2019). Modified Peek formula for calculating positive DC corona inception voltage on polluted insulator. Electrical Engineering, 101, p. 489-498.

Amrani M.L., Bouazabia S., Fofana Issouf, Meghnefi Fethi et Jabbari Marouane. (2020). On discharge inception voltage for insulators under non-uniform field with AC voltage. Dans : 2019 International Conference on Advanced Electrical Engineering (ICAEE) , 19-21 Nov. 2019, Algiers, Algeria.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Effect of carbon anode production parameters on anode cracking. SN Applied Sciences, 3,

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Coulombe Patrick. (2017). Evolution of anode properties during baking. International Journal of Innovative Science, Engineering & Technology, 4, (4), p. 301-309.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Morais Brigitte. (2016). Characterization of cracking mechanisms of carbon anodes used in aluminum industry by optical microscopy and tomography. Journal of Materials Engineering and Performance, 25, (10), p. 4274-4282.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Blainey Jerry. Quantitative evaluation of the cracking of carbon anodes by image analysis for aluminum industry. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Blaney Gerry. (2014). Effect of heating rate on the crack formation during baking in carbon anodes used in aluminum industry. Light Metals, p. 1175-1180.

Andoh Marc Alain, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Marceau Daniel et Morais Brigitte. (2016). Measurement of the electric current distribution in an anode. Light Metals, p. 889-894.

Anisetti Marco, Bellandi Valerio, Chehri Abdellah, Qian Yurong et Jeon Gwanggil. (2016). Embedded systems for mobile sensors. Journal of Sensors, 2016, e8312032.

Arakelian V. G. et Fofana Issouf. (2007). Water in oil-filled high-voltage equipment part II: water content as physicochemical tools for insulation condition diagnostic. IEEE Electrical Insulation Magazine, 23, (5), p. 15-24.

Arakelian V.G. et Fofana Issouf. (2007). Water in oil filled high voltage equipment, part I : states, solubility and equilibrium in insulating materials. IEEE Electrical Insulation Magazine, 23, (4), p. 15-27.

Arakellian V.G. et Fofana Issouf. (2009). Physicochemical aspects of gassing of insulating liquids under electrical stress. IEEE Electrical Insulation Magazine, 25, (3), p. 43-51.

Arguin Jean-Philippe, Pagé Philippe, Girard Réjean et Barnes Sarah-Jane. The spatial variation of mineralogy in the vanadiferous magnetite deposit of the Lac Doré Complex (Chibougamau, Québec) and its implications on the chemical purity of magnetite concentrates. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Arianpour Faranak, Farhadi Shahram, Farzaneh Masoud et Jafari Reza. (2017). Erratum to: Effect of heterogeneity on hydro/ice-phobic properties of alkylsilane/fluoro-alkylsilane-based coatings on Al substrates. Journal of Caotings Technology and Research, 14, (1), p. 277.

Arianpour Faranak, Farzaneh Masoud et Jafari Reza. (2016). Hydrophobic and ice-phobic properties of self-assembled monolayers (SAMs) coatings on AA6061. Progress in Organic Coatings, 93, p. 41-45.

Arroyo Fernandez Oscar Henry, Fofana Issouf, Jalbert Jocelyn, Gagnon Sylvie, Rodriguez-Celis Esperanza, Duchesne Steve et Ryadi Mohamed. (2018). Aging characterization of electrical insulation papers impregnated with synthetic ester and mineral oil : correlations between mechanical properties, depolymerization and some chemical markers. IEEE Transactions on Dielectrics and Electrical Insulation, 25, (1), p. 217-227.

Arroyo Fernandez Oscar Henry, Fofana Issouf, Jalbert Jocelyn, Rodriguez Esperanza, Rodriguez Lidia et Ryadi Mohamed. (2017). Assessing Changes in Thermally Upgraded Papers with Different Nitrogen Contents under Accelerated Aging. IEEE Transactions on Dielectrics and Electrical Insulation, 24, (3), p. 1829-1839.

Arroyo Fernandez Oscar Henry, Jalbert Jocelyn, Fofana Issouf et Ryadi Mohamed. (2017). Temperature dependence of methanol and tensile strength of insulation paper: Kinetics of the changes of mechanical properties during ageing. Cellulose, 24, (2), p. 1031-1039.

Arroyo Fernandez Oscar Henry, Jalbert Jocelyn, Rodriguez-Celis Esperanza, Duchesne Steve, Morin Brigitte et Fofana Issouf. (2020). Changes in mechanical properties of impregnated Nomex papers 410 and 910 during accelerated aging. Polymer Testing, 83, (106358), p. 1-13.

Arshad Dr., Momen Gelareh, Farzaneh Masoud et Nekahi Azam. (2017). Properties and applications of superhydrophobic coatings in high voltage outdoor insulation: A review. IEEE Transactions on Dielectrics and Electrical Insulation, 24, (6), p. 3630-3646.

Asadollahi Siavash, Jafari Reza et Farzaneh Masoud. (2016). Effect of HMDSO flow rate in nitrogen atmospheric plasma on the superhydrophobic characteristics of organosilicon-based coatings. Dans : 2016 IEEE International Conference on Plasma Science (ICOPS) , 19-23 June 2016, Banff, AB, Canada.

Ashoka S., Saleema Noormohammed et Sarkar Dilip K.. (2017). Tuning of superhydrophobic to hydrophilic surface : a facile one step electrochemical approach. Journal of Alloys and Compounds, 695, p. 1528-1531.

Ashoka S., Saleema Noormohammed et Sarkar Dilip K.. (2017). Tuning of superhydrophobic to hydrophilic surface: A facile one step electrochemical approach. Journal of Alloys and Compounds, 695, p. 1528-1531.

Attia Mohamed, Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2020). Fatigue cycles and performance evaluation of accelerating aging heat treated aluminum semi solid materials designed for automotive dynamic components. Applied Sciences, 10, (9), p. 1-15.

Aubert Roger J., Truchon Martin, Sinusas Eric, Boussetoua Mohammed, Ouhrouche Mohand, Fortin Guy, Mercier Carol et Perron Jean. Electrical generator for rotating structure. .

Auger Marc, Baril Daniel, Parent Luc et Perron Jean. High temperature and abrasion resistant temperature measuring device. .

Ayena Cossoun Johannes, Chapwouo T. Landry D., Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. An Efficient Home-Based Risk of Falling Assessment Test Based on Smartphone and Instrumented Insole. Dans : IEEE International Symposium on Medical Measurements and Applications , 7-9 May 2015, Turin, Italy.

Ayena Cossoun Johannes, Tremblay Louis E., Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. (2018). Comparing auditory, visual and vibrotactile cues in individuals with Parkinson’s disease for reducing risk of falling over different types of soil. Somatosensory & Motor Research, p. 1-9.

Ayena Johannes C., Chioukh Lydia, Otis Martin J.-D. et Deslandes Dominic. (2021). Risk of falling in a timed Up and Go test using an UWB radar and an instrumented insole. Sensors, 21, (3), p. 722.

Ayena Johannes C. et Otis Martin J.-D.. (2020). Dimensional reduction of balance parameters in risk of falling evaluation using a minimal number of force-sensitive resistors. International Journal of Occupational Safety and Ergonomics,

Ayena Johannes C. et Otis Martin J.-D.. (2020). Validation of minimal number of force sensitive resistors to predict risk of falling during a timed up and go test. Journal of Medical and Biological Engineering,

Azimi Yancheshme Amir, Allahdini Anahita, Maghsoudi Khosrow, Jafari Reza et Momen Gelareh. (2020). Potential anti-icing applications of encapsulated phase change material–embedded coatings; a review. Journal of Energy Storage, 31, e101638.

Azimi Yancheshme Amir, Hassantabar S., Maghsoudi Khosrow, Keshavarzi S., Jafari Reza et Momen Gelareh. (2021). Integration of experimental analysis and machine learning to predict drop behavior on superhydrophobic surfaces. Chemical Engineering Journal, 417, e127898.

Azimi Yancheshme Amir, Momen Gelareh et Jafari Reza. (2020). Mechanisms of ice formation and propagation on superhydrophobic surfaces: A review. Advances in Colloid and Interface Science, 279, e102155.

Azizi Sohrab, Momen Gelareh, Ouellet-Plamondon Claudiane et David Éric. (2020). Enhancement in electrical and thermal performance of high‐temperature vulcanized silicone rubber composites for outdoor insulating applications. Journal of Applied Polyer Science, 137, e49514.

Azizi Sohrab, Momen Gelareh, Ouellet-Plamondon Claudiane et David Éric. (2020). Performance improvement of EPDM and EPDM/Silicone rubber composites using modified fumed silica, titanium dioxide and graphene additives. Polymer Testing, 84,

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad et Fofana Issouf. (2015). Metaheuristics as a solving approach for the infrared heating in the thermoforming process. Groupe d'études et de recherche en analyse des décisions GERAD.

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad et Fofana Issouf. (2018). Uniform distribution with MBO method of the infrared radiative energy in the thermoforming process of an ABS sheet. Cahiers du Gerad, G-2018-73,

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad, Fofana Issouf et Nahas Nabil. (2018). Numerically optimizing the distribution of the infrared radiative energy on a surface of a thermoplastic sheet surface. Journal of Heat Transfer, 140, (10), p. 102101-102108.

Baiteche Mounir, Kocaefe Duygu, Kocaefe Yasar S., Marceau Daniel, Morais Brigitte et Lafrance Jacques. (2015). Description and applications of a 3D mathematical model for horizontal anode baking furnaces. Light Metals, p. 1115-1120.

Baiteche Mounir, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. A 3D mathematical model of a horizontal anode baking furnace as a design tool. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Barkallah Eya, Freulard Johan, Otis Martin J.-D., Ngomo Suzy, Ayena Cossoun Johannes et Desrosiers Christian. (2017). Wearable devices for classification of inadequate posture at work using neural networks. Sensors, 17, (9), p. 1-24.

Barkallah Eya, Otis Martin J.-D., Ngomo Suzy et Heraud Michel. Measuring operator’s pain : toward evaluating Musculoskeletal disorder at work. Dans : IEEE International Conference on Systems, Man, and Cybernetics (SMC) , 9-12 Oct. 2015, Kowloon, Hong Kong.

Barnes Sarah-Jane. Chalcophile element concentrations in magmatic nickel sulphide deposits. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Barnes Sarah-Jane. (2016). Chalcophile Elements. Dans Encyclopedia of geochemistry. (p. 1-5). Encyclopedia of Earth Sciences Series. Switzerland : Springer International Publishing.

Barnes Sarah-Jane, Melezhik Victor A. et Sokolov Stanislav V.. Chalcophile element concentrations in the Pechenga sulphides : comparison with the Cape Smith sulphides. Dans : IGCP Project 427 - Abstracts from the 1999 field conference in Rouyn-Noranda on Ore Forming Processes in Dynamic Magmatic Systems , 15-17 July 1999, Rouyn-Noranda, QC.

Barthod Christine, Passard Michelle, Galez C., Bouillot Jacques, Farzaneh Masoud, Volat Christophe et Teisseyre Yves. (2003). Safe probe for high electric field measurements. CCECE 2003 - Canadian Conference on Electrical and Computer Engineering. Toward a Caring and Humane Technology, 2003, p. 635-638.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Fuel consumption evaluation of an optimized new hybrid pneumatic-combustion vehicle engine on several driving cycles. International Journal of Engine Research, 13, (3), p. 253-273.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). A new hybrid pneumatic combustion engine to improve fuel consumption of wind-Diesel power system for non-interconnected areas. Applied Energy, 96, p. 459-476.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Optimal management of compressed air energy storage in a hybrid wind-pneumatic-diesel system for remote area's power generation. Energy, 84, p. 267-278.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Pneumatic hybridization of a diesel engine using compressed air storage for wind-diesel energy generation. Energy, 38, (1), p. 264-275.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. Pneumatic hybridization of diesel engine in a hybrid wind-diesel installation with compressed air energy storage. Dans : 4th Int. Conference on Integrated Modeling and Analysis in Applied Control and Automation, IMAACA 2010, Held at the International Mediterranean and Latin American Modeling Multiconference, I3M 2010 , October 13-15, 2010, Fes, Maroc.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Required time response of a variable valve actuator equiping a hybrid pneumatic-combustion engine. International Journal of Engine Research, 13, (5), p. 514-528.

Bédard Frédéric, Fiset Mathieu, Bastien Josée et Mitchell Denis. (2019). Shear strengthening of thick concrete slabs accounting for loading during strengthening. Dans : Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5 , 15–17 July 2019, London, United Kingdom.

Beisswenger Arlene. (2006). AS-5900 some changes. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2006, Lisbon, Portugal.

Beisswenger Arlene. (2007). Snow pellets tests. Dans : SAE Holdover Time Sub-Committee , Novembre 14, 2007, Montréal, Québec.

Beisswenger Arlene, Laforte Caroline et Perron Jean. (2011). Issues and testing of non-glycol aircraft ground deicing fluids. Dans : SAE Technical Papers - SAE 2011 International Conference on Aircraft and Engine Icing and Ground Deicing , 13-17 June 2011, Chicago, IL.

Beisswenger Arlene et Leroux Jacques. (2011). AMS1428 : rewording of rational for section 3.2.2.5 thin film thermal stability (to simulate heated leading edge dry out). Dans : SAE G-12 Fluids Subcommittee Meeting , May 2011, San Francisco, CA.

Beisswenger Arlene et Perron Jean. Laboratory testing of aircraft anti-icing fluid rehydrated gel residues. Dans : SAE Technical Papers - SAE Aircraft and Engine Icing International Conference , 24-27 September 2011, Seville; Spain.

Beisswenger Arlene, Wang Xiaofei, Laforte Jean-Louis et Perron Jean. Simulation of freezing and frozen precipitation for the evaluation of de/anti-icing systems. Dans : SAE Tehnical Paper Series, SAE Aircraft & Engine Icing International Conference , Septembre 24-27, 2007, Seville, Spain.

Béland J.F, Fafard Mario, Rahem Ahmed, D'Amours Guillaume et Côté T.. (2011). Optimization on the cold drawing process of 6063 aluminium tubes. Applied Mathematical Modelling, 35, (11), p. 5302-5313.

Bellandi Valerio, Chehri Abdellah, Cuomo Salvatore et Jeon Gwanggil. (2021). Special issue on deep learning for emerging big multimedia super-resolution. Multimedia Systems, 2021,

Ben Brahem Mahmoud, Ayena Cossoun Johannes, Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. Risk of falling assessment on different types of ground using the instrumented TUG. Dans : 2015 IEEE International Conference on Systems, Man, and Cybernetics (SMC), , 9-12 Oct. 2015, Kowloon, Hong Kong.

Ben Brahem Mahmoud, Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. (2013). Use of a 3DOF accelerometer for foot tracking and gesture recognition in mobile HCI. Procedia Computer Science, 19, p. 453-460.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2017). A non-destructive technique for the on-line quality control of green and baked anodes. Metals, 7, (4), p. 128-138.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. A non-destructive technique for the on-line quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Desmeules Jean-François. An experimental testing of the SERMA technology for the quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Beroual Abderrahmane et Fofana Issouf. (2000). Evaluation of the Streamer Conductivity in Liquids using and Equivalent Electrical Network Model. Archives of Electrical Engineering, 49, (1), p. 23-33.

Beroual Abderrahmane, Rakotonandrasana J-H et Fofana Issouf. (2010). Predictive dynamic model of the negative lightning discharge based on similarity with long laboratory sparks - Part 1: Physical process and modelling. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (5), p. 1551-1561.

Beroual Abderrahmane, Rakotonandrasana J-H et Fofana Issouf. (2010). Predictive dynamic model of the negative lightning discharge based on the similarity with long laboratory sparks - Part 2: Validation. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (5), p. 1562-1568.

Bessedik Sid Ahmed, Hadi Hocine A., Volat Christophe et Jabbari Marouane. (2014). Refinement of residual resistance calculation dedicated to polluted insulator flashover models. IEEE Transactions on Dielectrics and Electrical Insulation, 21, (3), p. 1207-1215.

Bétié Amidou, Meghnefi Fethi, Fofana Issouf et Yéo Zié. (2018). Modeling the insulation paper drying process from thermogravimetric analyses. Energies, 11, (3), p. 517.

Bétié Amidou, Meghnefi Fethi, Fofana Issouf, Yéo Zié et Ezzaidi Hassan. (2015). Neural network approach to separate aging and moisture from the dielectric response of oil impregnated paper insulation. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (4), p. 2176-2184.

Bétié Amidou, Mohan Rao U., Fofana Issouf, Fethi Meghnefi et Yéo Zié. (2019). Influence of cellulose paper on gassing tendency of transformer oil under electrical discharge. IEEE Transactions on Dielectrics and Electrical Insulation, 26, (6), p. 1729-1737.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2017). An artificial neural network model for predicting the CO2 reactivity of carbon anodes used in the primary aluminum production. Neural Computing and Applications, 28, (3), p. 553-563.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2015). Comparison of linear multivariable, partial least square regression, and artificial neural network analyses to study the effect of different parameters on anode properties. Light Metals, p. 1129-1134.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2013). Determination of coke, pitch and pores/cracks in green anode by image analysis. Journal of Surface Engineered Materials and Advanced Technology, 3, p. 1-6.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Application of the artificial neural network (ANN) in predicting anode properties. Light Metals, p. 1189-1194.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). A model for predicting the electrical resistivity of baked anodes. Light Metals, p. 1195-1199.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. Study of the effect of granulometry on coke bulk density using artificial neural network. Dans : Materials Science & Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Lafrance Jacques. (2015). Traceability of raw materials in silos in an anode plant. Light Metals, p. 1073-1078.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Arunima, Morais Brigitte et Chabot Jérôme. (2014). Characterization of dry aggregates in carbon anodes by image analysis. Light Metals, p. 1111-1114.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2012). Application of a new procedure for the optimization of variable thickness drawing of aluminium tubes. CIRP Journal of Manufacturing Science and Technology, 5, (2), p. 142-150.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2015). Global optimisation of the production of complex aluminium tubes by the hydroforming process. CIRP Journal of Manufacturing Science and Technology, 9, p. 1-11.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for production of variable thickness aluminium tubes : numerical and experimental studies. Journal of Materials Processing Technology, 211, (4), p. 578-589.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Perspectives for the application of variable thickness aluminium tubes in hydroforming of complex tubes. Materials Science Forum, 690, p. 447-450.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Guillot Michel, Rahem Ahmed et Fafard Mario. (2013). Numerical and experimental studies on the new design concept of hydroforming dies for complex tubes. Materials and Design, 47, p. 766-778.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Rahem Ahmed, Guillot Michel et Fafard Mario. (2010). Optimization on the production of variable thickness aluminium tubes. Dans : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, MSEC2010 , October 12-15, 2010, Erie, Pennsylvania.

Bihamta Reza, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Numerical studies on the production of variable thickness aluminium tubes for transportation purposes. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Bolduc Sébastien et Kiss László. (2020). Sensitivity study of the influence of the water boiling parameters on aluminum semi-continuous DC casting. International Journal of Thermal Sciences, 151, (106276),

Bouaicha Abdelghafour, Fofana Issouf, Farzaneh Masoud, Beroual Abderrahmane, Setayeshmehr Alireza, Borsi Hossein et Gockenbach Ernst. (2008). Contrôle non destructif des isolations électriques par spectroscopie diélectrique durant la fabrication des bornes de traversée. Revue de l'Electricité et de l'Electronique, 11, p. 58-67.

Bouaïcha Abdelghafour, Fofana Issouf, Farzaneh Masoud, Setayeshmehr Alireza, Borsi Hossein, Gockenbach E., Beroual Abderrahmane et Aka Ngnui-Thomas. (2009). Dielectric spectroscopy techniques as quality control tool: a feasibility study. IEEE Electrical Insulation Magazine, 25, (1), p. 6-14.

Boudraa S., Mokhnache L., Fofana Issouf et Benabed F.. (2021). Study of spectral response of transformer oil under low electrical discharge and thermal stress. Dans : 18th International Multi-Conference on Systems, Signals & Devices (SSD) , March 22-25, 2021, Monastir, Tunisia & Virtual.

Bouhassoune Ibtissame, Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Menoui Khalid. (2020). Review of Internet of Things and Design of New UHF RFID Folded Dipole with Double U Slot Tag. Dans Human centred intelligent systems. (p. 281-291). Smart Innovation, Systems and Technologies. Singapore : Springer.

Bouhassoune Ibtissame, Chehri Abdellah, Saadane Rachid et Minaoui Khalid. (2020). Optimization of UHF RFID five-slotted patch tag design using PSO algorithm for biomedical sensing systems. International Journal of Environmental Research and Public Health, 17, (22), p. 8593.

Boulanger Joan, Lalancette Francis, Gosselin A., Dion Lukas, Gaboury Simon, Guimond L., Simard C. et Blais A.. (2020). A taxonomy of low-voltage perfluorocarbon emissions in primary aluminium production cells. Dans : Conference of Metallurgists , 24-27 aug 2020, Fairmont Royal York, Toronto.

Bourgeois Thierry, Steward Nigel Ian, Huni Jean-Paul, Tremblay François et Perron Jean. Fluid bed system for cooling hot spent anode butts. .

Bouslimi Y., Fofana Issouf, Hemmatjou Hossein et Volat Christophe. (2010). Static electrification assessment of transformer oils in the spinning disc system. Dans 2010 International Conference on High Voltage Engineering and Application. (2010, ). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Bouslimi Y., Taheri K., Fofana Issouf, Hemmatjou Hossein et Volat Christophe. (2013). Influence of oil-paper conditions on the static electrification phenomena of transformer oils. High Voltage Engineering, 39, (8), p. 1966-1973.

Boussetoua Mohammed, Perron Jean et Ouhrouche Mohand. Contribution to the study and design of an electro-thermal de-icing/anti-icing system applied to rotorcraft. Dans : 70th American Helicopter Society international annual forum 2014 , 20-22 May 2014, Montreal, Quebec.

Brassard Jean-Denis et Laforte Caroline. (2017). Silicone based icephobic coating assessment under offshore winter conditions. Dans : 27th International Ocean and Polar Engineering Conference , June 25–30, 2017, San Francisco, California, USA.

Brassard Jean-Denis, Laforte Caroline, Guérin Frédéric et Blackburn Caroline. (2019). Icephobicity : definition and measurement regarding atmospheric icing. Dans Contamination mitigating polymeric coatings for extreme environments. (p. 123-143). Advances in Polymer Science. Switzerland AG : Springer, Cham.

Brassard Jean-Denis, Laforte Caroline, Tremblay Marc Mario et Volat Christophe. (2019). Runway deicing product anti/deicing performance assessment: review and future directions. SAE Technical Papers, 2019, (1974),

Brassard Jean-Denis, Laforte Caroline et Volat Christophe. (2019). Type IV anti-icing fluid subjected to light freezing rain: visual and thermal analysis. SAE Technical Papers, (1971),

Brassard Jean-Denis, Laforte Jean-Louis, Blackburn Caroline, Perron Jean et Sarkar Dilip K.. (2017). Silicone based superhydrophobic coating efficient to reduce ice adhesion and accumulation on aluminum under offshore arctic conditions. Ocean Engineering, 144, p. 135-141.

Brassard Jean-Denis, Perron Jean et Sarkar Dilip K.. (2016). A short review on the applications of the superhydrophobic coatings on metals. Dans : 28th International Mineral Processing Congress, IMPC 2016 , 11-15 September 2016, Quebec City Convention CenterQuebec City.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Fluorine Based Superhydrophobic Coatings. Applied Sciences, 2, (2), p. 453-464.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2015). Studies of drag on the nanocomposite superhydrophobic surfaces. Applied Surface Science, 324, (1), p. 525-531.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Surface modification and functionalization of oxide nanoparticles for superhydrophobic applications. Advanced Materials Research, 409, p. 469-473.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2011). Synthesis of Monodisperse Fluorinated Silica Nanoparticles and Their Superhydrophobic Thin Films. ACS Applied Materials & Interfaces, 3, (9), p. 3583-3588.

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean, Audibert-Hayet Annie et Melot Denis. (2015). Nano-micro structured superhydrophobic zinc coating on steel for prevention of corrosion and ice adhesion. Journal of Colloid and Interface Science, 447, p. 240-247.

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean et Fortin Guy. (2010). Nanostructured superhydrophobic coatings using fluoroalkylsilane modified silica nanoparticles. 1st conference on Nanotechnologies: Fundamentals and applications,

Brassard Jean-Denis, Villeneuve Éric et Volat Christophe. (2020). Laboratory scaled third rail deicing comparative test. Results in Engineering, 6,

Brassard Jean-Denis, Villeneuve Éric et Volat Christophe. (2020). Laboratory scaled third rail deicing comparative test. Results in Engineering, 6, p. 1-2.

Brassard Simon, Otis Martin J.-D., Poirier Alexendre et Ménélas Bob-Antoine-Jerry. Towards an automatic version of the Berg Balance Scale test through a serious game. Dans : Second ACM Workshop on Mobile Systems, Applications, and Services for Healthcare , November 6–9, 2012, Toronto, ON, Canada.

Briosso E., Fofana Issouf, Robertson B. et Sabau John. (2007). Enhancing the Maintenance of Transformer Oils to Diminish the Risk of Blackouts. Energetica, 55, p. 465-469.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Investigation of the formability limit of aluminium tubes drawn with variable wall thickness. Journal of Materials Processing Technology, 211, (3), p. 402-414.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for determination of formability limit in the tube drawing process. Dans : TMS2011 Annual Meeting & Exhibition : Supplemental Proceedings : Volume 3 : General Paper Selections , 27 February - March 3, 2011, San Diego, California.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, Rahem Ahmed et Fafard Mario. (2011). Effect of cross section reduction on the mechanical properties of aluminium tubes drawn with variable wall thickness. Journal of Manufacturing Science and Engineering, 133, (6), p. 1-10.

Bui Rung-Tien, Hachette R., Simard G., Perron Jean et Dessureault J. F.. Computer simulation of the anthracite calcining furnace. Dans : Light metals 1999 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the 128th TMS Annual Meeting , February 28-March 4, 1999, San Diego, California.

Bui Rung-Tien, Hachette R., Simard G., Perron Jean et Dessureault J. F.. A control strategy for the anthracite calciner. Dans : Light metals 2000 : proceedings of the International Symposium on Light Metals - MetSoc 39th Annual Conference of Metallurgists of CIM , August 20-23, 2000, Ottawa, Ontario.

Bui Rung-Tien et Perron Jean. (1988). Performance analysis of the aluminum casting furnace. Metallurgical Transactions B, 19, (2), p. 171-180.

Bui Rung-Tien, Perron Jean et Fillion C.. Model-based control for industrial processes using a virtual laboratory. Dans : 13th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE 2000 , June 19–22, 2000, New Orleans, Louisiana.

Bui Rung-Tien, Perron Jean et Read M.. (1993). Model-based optimization of the operation of the coke calcining kiln. Carbon, 31, (7), p. 1139-1147.

Bui Rung-Tien, Simard G., Charette André, Kocaefe Yasar S. et Perron Jean. (1995). Mathematical modeling of the rotary coke calcining kiln. The Canadian Journal of Chemical Engineering, 73, (4), p. 534-545.

Bui Rung-Tien, Simard G., Kocaefe Yasar S., Charette André, Lacroix M., Jain S., Perron Jean, Proulx André L. et Barr P. V.. (1991). 3D-simulation of the thermal performance of a coke calcining kiln. International Symposium on Extraction, Refining and Fabrication of Light Metals, 24, p. 307-314.

Bui Rung-Tien, Tikasz L.G. et Perron Jean. Trends in intelligent process control methods in the primary aluminum industry. Dans : IPPM'99 : proceedings of the Second International Conference on Intelligent Processing and Manufacturing of Materials : Hilton Hawaiian Village Hotel , July 10-15, 1999, Honolulu, Hawaii.

Bureau Julie, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Quantification of sodium present in dry aggregates and anodes. Light Metals, p. 877-881.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2018). Étude de l’amélioration des propriétés des anodes par le brai modifié. The Canadian Journal of Chemical Engineering, 96, (8), p. 1697-1706.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2018). Modification des propriétés du brai de goudron de houille utilisé dans la fabrication des anodes. Canadian Journal of Chemical Engineering, 96, (2), p. 545-553.

Bureau Julie, Rastegari Armita, Kocaefe Duygu, Kocaefe Yasar S. et Darmstadt Hans. (2020). Additive selection for coal tar pitch modification in aluminium industry. Light Metals, 2020, p. 1329-1337.

Campeau-Lecours Alexandre, Otis Martin J.-D., Belzile Pierre-Luc et Gosselin Clément. (2016). A time-domain vibration observer and controller for physical human-robot interaction. Mechatronics, 36, p. 45-53.

Campeau-Lecours Alexandre, Otis Martin J.-D. et Gosselin Clément. (2016). Modeling of physical human–robot interaction : admittance controllers applied to intelligent assist devices with large payload. International Journal of Advanced Robotic Systems, 13, (5), p. 1-12.

Carreira A. J., Maghsoudi Khosrow, Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2019). Self-Cleaning Properties of Injection Molded Super-Hydrophobic Silicone Rubber for HV Insulators. Dans INMR World Congress (INMR 2019). (2019, 2019, p. 114). Westmount (Montréal) : INMR.

Cave Ben J., Barnes Sarah-Jane, Sack Patrick J., Pitcairn Iain K., Johnson Sean C. et Kuikka Helena. Semi-metal and base metal mobility in the metasedimentary contact aureole surrounding the Dublin Gulch reduced intrusion-related gold system (RIRGS), Yukon, Canada. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Zimmerman Alfred. (2020). Parallel Genetic Algorithm Decoder Scheme Based on DP-LDPC codes for industrial IoT scenarios. Procedia Computer Science, 176, p. 3496-3505.

Chamam Yasmine, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2016). Effect of heating rate during baking on the properties of carbon anodes used in aluminum industry. Light Metals, p. 947-951.

Charest Philippe, Potvin André, Demers Claude M. H. et Ménard Sylvain. (2019). Assessing the complexity of timber gridshells in architecture through shape, structure, and material classification. BioResources, 14, (1), p. 1364-1378.

Chehouri Adam, Ghandour Mazen et Livinti Petru . (2014). A real time simulation of a photovoltaic system with maximum power point tracking. Proceedings of the International Conference on Industrial Power Engineering , 9th,

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi-objective optimization. Dans Wind Turbines : Design, Control and Applications. (p. 121-147). Rijeka, Croatia : InTech.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi‐objective optimization. Dans Wind turbines : design, control and applications. (p. 121-148). Croatia : InTech.

Chehouri Adam, Younès Rafic, Khoder Jihan, Perron Jean et Ilinca Adrian. (2017). A selection process for genetic algorithm using clustering analysis. Algorithms, 10, (4), p. 123.

Chehri Abdellah. (2019). Energy-efficient modified DCC-MAC protocol for IoT in e-health applications. Internet of Things, e100119.

Chehri Abdellah. (2019). A low complexity turbo equalizer for power-line communication with applications to smart grid networks. Dans 2019 IEEE International Symposium on Power Line Communications and its Applications (ISPLC). (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Chehri Abdellah. (2020). Non-cooperative spectrum allocation based on game theory in IoT-Oriented narrowband PLC networks. Dans 2020 IEEE 91st Vehicular Technology Conference (VTC Spring) : proceedings. (p. 1-5). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Chehri Abdellah, Chaibi Hasna, Saadane Rachid, Hakem Nadir et Wahbi Mohamed. (2020). A framework of optimizing the deployment of IoT for precision agriculture industry. Procedia Computer Science, 176, p. 2414-2422.

Chehri Abdellah, Chehri Hamou, Hakim Nadir et Saadane Rachid. (2020). Realistic 5.9 GHz DSRC vehicle-to-vehicle wireless communication protocols for cooperative collision warning in underground mining. Dans Smart Transportation Systems 2020 : proceedings of 3rd KES-STS International Symposium. (p. 133-141). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah, Fofana Issouf et Yang Xiaomin. (2021). Security risk modeling in smart grid critical infrastructures in the era of big data and artificial intelligence. Sustainability, 13, (6), p. 3196.

Chehri Abdellah et Fortier Paul. (2020). Autonomous vehicles in underground mines, where we are, where we are going? Dans 2020 IEEE 91st Vehicular Technology Conference (VTC Spring) : proceedings. (p. 1-5). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Chehri Abdellah et Fortier Paul. (2019). Low-cost localization and tracking system with wireless sensor networks in snowy environments. Dans Innovation in Medicine and Healthcare Systems, and Multimedia : Proceedings of KES-InMed-19 and KES-IIMSS-19 Conferences. (p. 529-543). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah et Fortier Paul. (2020). Wireless positioning and tracking for Internet of Things in heavy snow regions. Dans Human centred intelligent systems. (p. 395-404). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah, Fortier Paul et Tardif Pierre-Martin. (2018). Time delay estimation for UWB non coherent receiver in indoor environment, from theory to practice. EURASIP Journal on Wireless Communications and Networking, (284), p. 1-11.

Chehri Abdellah et Jeon Gwanggil. (2019). The Industrial Internet of Things: examining how the IIoT will improve the predictive maintenance. Dans Innovation in Medicine and Healthcare Systems, and Multimedia : Proceedings of KES-InMed-19 and KES-IIMSS-19 Conferences. (p. 517-527). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah et Jeon Gwanggil. (2018). Optimal matching between energy saving and traffic load for mobile multimedia communication. Concurrency and Computation : Practice and Experience, 33, (4), e5035.

Chehri Abdellah et Jeon Gwanggil. (2018). Real‐time multiuser scheduling based on end‐user requirement using big data analytics. Concurrency and Computation : Practice and Experience, 33, (4), e5021.

Chehri Abdellah et Jeon Gwanggil. (2019). Routing protocol in the industrial Internet of Things for smart factory monitoring. Dans Innovation in Medicine and Healthcare Systems, and Multimedia : Proceedings of KES-InMed-19 and KES-IIMSS-19 Conferences. (p. 505-515). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah et Mouftah Hussein T.. (2020). Internet of Things – integrated IR-UWB technology for healthcare applications. Concurrency and Computation : Practice and Experience, 32, (2), e5454.

Chehri Abdellah et Mouftah Hussein T.. (2020). Localization for vehicular ad hoc network and autonomous vehicles, are we done yet? Dans Connected and Autonomous Vehicles in Smart Cities. (1st Ed., ). Boca Raton, FL : CRC Press.

Chehri Abdellah et Mouftah Hussein T.. (2018). New MMSE downlink channel estimation for sub-6 GHz Non-Line-of-Sight backhaul. Dans 2018 IEEE Globecom Workshops (GC Wkshps). (p. 1-7). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Chehri Abdellah et Mouftah Hussein T.. (2020). PHY-MAC MIMO precoder design for sub-6 GHz backhaul small cell. Dans 2020 IEEE 91st Vehicular Technology Conference (VTC Spring). (p. 1-5). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Chehri Abdellah, Ouahmani Tarik El et Hakem Nadir. (2019). Mining and IoT-based Vehicle Ad-hoc NETwork: Industry opportunities and innovation. Internet of Things, e100117.

Chehri Abdellah, Quadar Nordine et Saadane Rachid. (2020). Communication and localization techniques in VANET network for intelligent traffic system in smart cities: a review. Dans Smart Transportation Systems 2020. (p. 167-177). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah, Quadar Nordine et Saadane Rachid. (2019). Survey on localization methods for autonomous vehicles in smart cities. Dans SCA '19 : Proceedings of the 4th International Conference on Smart City Applications. (p. 1-6). New York : Association for Computing Machinery.

Chehri Abdellah et Saadane Rachid. (2019). Zigbee-based remote environmental monitoring for smart industrial mining. Dans SCA '19 : Proceedings of the 4th International Conference on Smart City Applications. (p. 1-6). New York : Association for Computing Machinery.

Chehri Abdellah, Saadane Rachid, Hakem Nadir et Chaibi Hasna. (2020). Enhancing energy efficiency of wireless sensor network for mining industry applications. Procedia Computer Science, 176, p. 261-270.

Chehri Abdellah et Zimmermann Alfred. (2020). Spectrum management of power line communications networks for industrial applications. Dans Human centred intelligent systems. (p. 173-182). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Hamou, Chehri Abdellah et Hakem Nadir. (2019). Empirical radio channel characterization at 5.9 GHz for vehicle-to-infrastructure communication. Dans 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall). (p. 1-6). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Chehri Hamou, Chehri Abdellah et Hakem Nadir. (2019). In underground vehicular radio channel characterization. Procedia Computer Science, 159, p. 514-523.

Chehri Hamou, Chehri Abdellah, Kiss László et Zimmerman Alfred. (2020). Automatic anode rod inspection in aluminum smelters using deep-learning techniques: a case study. Procedia Computer Science, 176, p. 3536-3544.

Chen Sinan, Liu Kun et Chen X-Grant. (2019). Precipitation behavior of dispersoids and elevated-temperature properties in Al–Si–Mg foundry alloy with Mo addition. Journal of Materials Research, 34, (18), p. 3071-3081.

Churchill Frederick, Perron Jean et Fortin Guy. Wind turbine apparatus = Dispositif pour éolienne. .

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Crashworthiness of aluminium tubes ; Part 2: improvement of hydroforming operation to increase absorption energy. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Effects of mesh size and remapping on the predicted crash response of hydroformed tubes. Dans : The 6th European LS-DYNA Users' Conference , May 2007, Gothenburg, Sweden.

D'Amours Guillaume, Rahem Ahmed, Williams Bruce, Worswick Michael et Mayer Robert. (2007). Crashworthiness of aluminium tubes ; Part 1 : Hydroforming at different corner-fill radii and end feeding levels. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

Darimireddy Naresh K., Mohan Rao U., Park Chan-Wang, Fofana Issouf, Sujatha M. et Verma Anant K.. (2021). Perspectives of convertors and communication aspects in automated vehicles, part 2: Printed antennas and sensors for automotive radars. Energies, 14, (6), p. 1656.

De Andrade Ferreira R. S., Picher Patrick, Ezzaidi Hassan et Fofana Issouf. (2021). Frequency response analysis interpretation using numerical indices and machine learning: A case study based on a laboratory model. IEEE Access, 9, p. 67051-67063.

De Debasis et Sarkar Dilip K.. (2017). Superhydrophobic ZnAl double hydroxide nanostructures and ZnO films on Al and glass substrates. Materials Chemistry and Physics, 185, p. 195-201.

De Debasis, Sarkar Dilip K. et Kocaefe Duygu. Nanostructured superhydrophobic ZnO surface layer on Al-substrate. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Desgroseillers B., Perron Jean, Laurin P., Ménard O. et Martin J.. Combustion of petroleum coke dust as a partial substitute for natural gas and oil in the alumina trihydrate calcination process. Dans : Light Metals 1996: Proceedings of the Technical Sessions Presented by the Tms Light Metals Committee at the 125th Tms Annual Meeting , February 4-8 1996, Anaheim, California.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Numerical simulation of the energy production losses due to icing of a wind turbine. Dans : International Conference on Energy Conversion and Conservation - CICME'10 , April 22-25, 2010, Hammamet, Tunisia.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Simulation numérique des pertes énergétiques d'une éolienne dues au givrage. Dans : CanWEA 2010 Conference and Exhibition , 1-3 novembre, 2010, Montreal, Quebec.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Software tool to predict the wind Energy production losses due to icing. Dans : 2011 IEEE Electrical Power and Energy Conference , 3-5 october 2011, Winnipeg, MB, Canada.

Dion Lukas, Gaboury Simon, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2018). New approach for quantification of perfluorocarbons resulting from high voltage anode effects. Dans : 147th Annual Meeting & Exhibition, TMS Ligth Metals 2018 , March 11-15, 2018, Phoenix, AZ.

Dion Lukas, Gaboury Simon, Picard Frédéric, Kiss László, Poncsák Sándor et Morais Nadia. (2018). Universal approach to estimate perfluorocarbons emissions during individual high-voltage anode effect for prebaked cell technologies. Journal of the Minerals, Metals and Materials Society, 70, (9), p. 1887-1892.

Dion Lukas, Kiss László, Chartrand Patrice, Dufour Gilles et Laflamme François. (2013). Sodium content in aluminum and current efficiency — correlation through multivariate analysis. Dans : 142nd Annual Meeting & Exhibition, TMS Light Metals 2013 , March 3-7, 2013, San Antonio, Texas.

Dion Lukas, Kiss László et Coursol Pascal. (2012). Development of a dynamic mass balance model for predicting metalpurity at Aluminerie Alouette. Dans : Proceedings of the 8th international conference on mechanical engineering , May 24-25, 2012, Budapest, Hungary.

Dion Lukas, Kiss László, Lavoie Dany et Arvisais Jean-Paul. (2014). Developing a new process indicator based on the relationship between an electrolysis cell impurity balance and its incident. Dans : 143rd Annual Meeting & Exhibition, TMS Light Metals 2014 , February 16-20, 2014, San Diego, CA.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2016). Influence of hooding conditions on gas composition at duct end of an electrolysis cell. Dans : 34th International Conference and Exhibition of ICSOBA , 3 to 6 October, 2016, Hotel Palace Royal in Quebec, Quebec.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2016). Prediction of low-voltage tetrafluoromethane emissions based on the operating conditions of an aluminium electrolysis cell. Journal of The Minerals, Metals & Materials Society, 68, (9), p. 2472-2482.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2018). Simulator of non-homogenous alumina and current distribution in an aluminum electrolysis cell to predict low-voltage anode effects. Metallurgical and Materials Transactions B, 49, p. 737-755.

Dion Lukas, Lagacé Charles-Luc, Evans James W., Victor Ron et Kiss László. (2015). On-line monitoring of anode currents to understand and improve the process control at Alouette. Dans : 144th Annual Meeting & Exhibition, TMS Light Metals 2015 , March 15-19, 2015, Orlando, Florida.

Dion Lukas, Lagacé Charles-Luc, Kiss László et Poncsák Sándor. (2016). Using artificial neural network to predict low voltage anode effect PFCs at the duct end of an electrolysis cell. Dans : 145th Annual Meeting & Exhibition, TMS Light Metals 2016 , February 14-18, 2016, Nashville, Tennessee.

Dion Lukas, Lagacé Charles-Luc, Laflamme François, Godefroy Antoine, Evans James W., Kiss László et Poncsák Sándor. (2017). Preventive treatment of anode effects using on-line individual anode current monitoring. Dans : 146th Annual Meeting & Exhibition, TMS Light Metals 2017 , September 2017, San Diego, CA.

Dion Lukas, Marks Jerry, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2017). Quantification of perfluorocarbons emissions during high voltage anode effects using non-linear approach. Journal of Cleaner Production, 164, p. 357-366.

Dion Lukas, Nunez Pernelle, Wong David, Gaboury Simon et Spirin Alexey. (2018). Evaluation of time consistency when quantifying emissions of perfluorocarbons resulting from low voltage anode effects. Dans : 147th Annual Meeting & Exhibition, TMS Ligth Metals 2018 , March 11-15, 2018, Phoenix, AZ.

Dion-Martin Olivier, Fafard Mario, Rahem Ahmed et D'Amours Guillaume. (2013). Characterization of AA5754 alloy for identification of Barlat's YLD2000‐2d yield criterion. Dans Characterization of Minerals, Metals, and Materials 2013. (p. 53-65). Hoboken, N.J : Wiley.

Dotan A., Dodiuk H., Laforte Caroline et Kenig S.. (2009). The relationship between water wetting and ice adhesion. Journal of Adhesion Science and Technology, 23, (15), p. 1907-1915.

Douassi Kakou D., Fofana Issouf, Cissé Ladji, Hadjadj Yazid, Yapi Kouba Marie Lucia et Ambroise Diby K.. (2018). Impact of low molecular weight acids on oil impregnated paper insulation degradation. Energies, 11, (6), p. 1465-478.

Duran Charley J., Barnes Sarah-Jane, Pleše Pia, Prašek Marko Kudrna, Pagé Philippe et Zientek Michael L.. Processes controlling the distribution of Te, As, Bi, Sb, and Sn, and the formation of platinum-group minerals in sulphide ores in the Noril’sk mining district (Russia). Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Ebrahimi G. R., Arabshahi H. et Javdani Mousa. (2010). Hot deformation behavior of Nb-V microalloyed steel. Journal of Mechanical Engineering Research, 2, (5), p. 92-96.

Ebrahimi G. R., Javdani Mousa et Arabshahi H.. (2010). Effect of thermo-mechanical parameters on microstructure and mechanical properties of microalloyed steels. Brazilian Journal of Physics, 40, (4), p. 454-458.

Eke Samuel, Aka-Ngnui Thomas, Clerc Guy et Fofana Issouf. (2020). Power transformer condition monitoring by 2FAL content and CO2/CO ratio – A fuzzy logic approac. Dans : 2019 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 20-23 october 2019, Richland, Washington.

El Amine Mohammed, Brahami Mostefa et Fofana Issouf. (2018). Combining and comparing different machine learning algorithms to improve dissolved gas analysis interpretation. IET Generation, Transmission & Distribution, 12, (15), p. 3673-3679.

El Aswad Fadwa, Tchane Djogdom Gilde Vanel, Otis Martin J.-D., Ayena Johannes C. et Meziane Ramy. (2021). Image Generation for 2D-CNN Using Time-Series Signal Features from Foot Gesture Applied to Select Cobot Operating Mode. Sensors, 21, (17), p. 5743.

El Hafid Yassine, El Rharras Abdessamad, Chehri Abdellah, Saadane Rachid et Wahbi Mohammed. (2020). Real-time data processing in autonomous vehicles based on distributed architecture: a case study. Dans Smart Transportation Systems 2020 : proceedings of 3rd KES-STS International Symposium. (p. 143-154). Smart Innovation, Systems and Technologies. Singapore : Springer.

El Rharras Abdessamad, Saber Mohammed, Chehri Abdellah, Saadane Rachid, Hakem Nadir et Jeon Gwanggil. (2020). Optimization of spectrum utilization parameters in cognitive radio using genetic algorithm. Procedia Computer Science, 176, p. 2466-2475.

Elgallad E. M., Liu Kun, Zhang Zhan et Chen X-Grant. (2020). Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy. Philosophical Magazine, 101, (1), p. 96-116.

Elgallad Emad Eldin, Zhang Zhan et Chen X-Grant. (2017). Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy. Physica B: Condensed Matter, 514, p. 70-77.

Emran S. M. Ale, Farzaneh Masoud et Volat Christophe. (2012). Simulation analysis of the effect of booster sheds on post insulators under icing conditions. 2012 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2012, (13175005), p. 749-752.

Evens James W., Dion Lukas, Laflamme François et Lagacé Charles-Luc. (2016). Recent on-line measurements of individual anode currents at Alouette. Dans : 34th International Conference and Exhibition of ICSOBA , 3 to 6 October, 2016, Hotel Palace Royal in Quebec, Quebec.

Fakorede Chabi Oloufemi, Feger Zoé, Ibrahim Hussein, Ilinca Adrian, Perron Jean et Masson Christian. (2016). Ice protection systems for wind turbines in cold climate: characteristics, comparisons and analysis. Renewable and Sustainable Energy Reviews, 65, p. 662-675.

Farid H., Farzaneh Masoud, Saeidi Ali et Erchiqui Fouad. (2016). A contribution to the study of the compressive behavior of atmospheric ice. Cold Regions Science and Technology, 121, p. 60-65.

Farid Redouane, Rajan Karthikeyan et Sarkar Dilip K.. (2019). Enhanced corrosion protection of aluminum by ultrasonically dip coated sodium silicate thin films. Surface and Coatings Technology, 374, p. 355-361.

Farid Redouane, Sarkar Dilip K. et De D.. (2019). Facile electrodeposition and corrosion properties of zirconium-based superhydrophobic thin films on aluminum. International Journal of Wettability Science & Technology, 1, (2), p. 121-136.

Farkoosh Amir Rezaei, Javidani Mousa, Hoseini M., Larouche Daniel et Pekguleryuz M.. (2013). Phase formation in as-solidified and heat-treated Al–Si–Cu–Mg–Ni alloys: Thermodynamic assessment and experimental investigation for alloy design. Journal of Alloys and Compounds, 551, p. 596-606.

Farokhi Shahab, Farzaneh Masoud et Fofana Issouf. (2010). The effect of polarity on dc arc development over an ice surface. Journal of Physics D: Applied Physics, 43, (18), p. 185202-185214.

Farokhi Shahab, Farzaneh Masoud et Fofana Issouf. (2010). Experimental investigation of the process of Arc propagation over an ice surface. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (2), p. 458-464.

Farzaneh Masoud, Baker Anthony C., Bernstorf R. Allen, Burnhan Jeff T., Cherney Edward A., Chisholm William A., Fofana Issouf, Gorur Ravi S., Grisham Tom, Gutman Igor, Rolfseng Lars et Stewart Gerald A.. (2007). Selection of line insulators with respect to ice and snow, Part II : selection methods and mitigations options. IEEE Transactions on Power Delivery, 22, (4), p. 2297-2304.

Farzaneh Masoud et Fofana Issouf. (2004). Experimental study and analysis of corona discharge parameters on an ice surface. Journal of Physics D: Applied Physics, 37, p. 721-729.

Farzaneh Masoud et Fofana Issouf. (2012). Review of streamer dynamics and surface charge accumulation on ice surfaces. Electrical and Electronic Engineering, 2, (6), p. 389-396.

Farzaneh Masoud et Fofana Issouf. (2004). Study of insulator flashovers caused by atmospheric ice accumulation. Journal of Iranian Association of Electrical and Electronics Engineers, 1, (1), p. 10-23.

Farzaneh Masoud, Fofana Issouf et Hemmatjou Hossein. (2007). Effects of temperature and impurities on the DC conductivity of snow. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (1), p. 185-193.

Farzaneh Masoud, Fofana Issouf, Ndiaye Ibrahima et Srivastava K. D.. (2006). Experimental studies of ice surface discharge inception and development. International Journal of Power & Energy Systems, 26, (1), p. 34-41.

Farzaneh Masoud, Fofana Issouf, Tavakoli C. et Chen X-Grant. (2003). Dynamic modeling of DC arc discharge on ice surfaces. IEEE Transactions on Dielectrics and Electrical Insulation, 10, (3), p. 463-474.

Farzaneh Masoud et Laforte Jean-Louis. (1997). A laboratory simulation of wet icing build-up On H.V. insulators. Dans The Seventh International Offshore and Polar Engineering Conference. (1997, ). Golden, Colo. : International Society of Offshore and Polar Engineers.

Farzaneh Masoud, Volat Christophe et Gakwaya Augustin. (2000). Electric field modelling around an ice-covered insulator using boundary element method. Conference Record of the 2000 IEEE International Symposium on Electrical Insulation, 2000, p. 349-355.

Farzaneh Masoud, Volat Christophe et Leblond Andrée. (2008). Anti-icing and de-icing techniques for overhead lines. Dans Atmospheric Icing of Power Networks. (p. 229-268). Netherlands : Springer.

Farzaneh Masoud, Volat Christophe et Zhang Jianhui. (2006). Role of air gaps on AC withstand voltage of an ice-covered insulator string. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (6), p. 1350-1357.

Farzaneh Masoud, Zhang Jianhui et Volat Christophe. (2006). Effect of insulator diameter on AC flashover voltage of an ice-covered insulator string. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (2), p. 264-271.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2014). Drilled-in shear reinforcement for concrete thick slabs : modelling aspects. Dans : 10th fib International PhD Symposium in Civil Engineering , July 21 to 23, 2014, Québec, Canada.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2012). Post-installed shear reinforcement for concrete thick slabs. Dans : 9th fib International PhD Symposium in Civil Engineering , July 22 to 25, 2012, Karlsruhe, Germany.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2019). Shear strengthening of concrete members with unbonded transverse reinforcement. Engineering Structures, 180, p. 40-49.

Fiset Mathieu, Bastien Josée, Mitchell Denis et Jolin Marc. (2012). Renforcement en cisaillement des dalles épaisses en béton armé : étude expérimentale et numérique. Dans : Treizième édition des Journées scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton (RF)²B , 5-6 juillet 2012, Lyon, France.

Fiset Mathieu, Bédard Frédéric, Bastien Josée et Mitchell Denis. (2018). Thick concrete slab bridges : study of shear strengthening. Dans : 10th International Conference on Short and Medium Span Bridges , July 31 – August 3, 2018, Quebec, Canada.

Fiset Mathieu, Parenteau Alexandra, Bilodeau Sébastien, Bastien Josée et Mitchell Denis. (2016). Behaviour of thick concrete members with unbonded transverse reinforcement. Dans : 11th fib International PhD Symposium in Civil Engineering , Aug 29 to 31, 2016, Tokyo, Japan.

Fiset Mathieu, Sanchez Leandro F. M., Bilodeau Sébastien, Mitchell Denis et Bastien Josée. (2021). Influence of Alkali-Silica reaction (ASR) on aggregate interlock and shear-friction behavior of reinforced concrete members. Engineering Structures, 233, e111890.

Fiset Mathieu, Villemure Félix-Antoine, Bastien Josée, Mitchell Denis et Fournier Benoît. (2013). Effet de l'endommagement sur la résistance au cisaillement des dalles épaisses en béton armé et méthodes de renforcement. Dans : Quatorzième édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)²B , 22-23 août 2013, Sherbrooke, Québec, Canada.

Fleury A., Ranjan R., Shah L., St-Georges Lyne, Rahem Ahmed et Walbridge S.. (2019). Fatigue design of friction stir welded joints in aluminium bridge decks. Dans : CSCE Annual Conference , June 12 - 15, 2019, Laval, Québec.

Fleury Anthony, St-Georges Lyne et Rahem Ahmed. (2018). Effect of welding equipment rigidity on mechanical and physical properties of friction stir welded aluminum 6061-T6. Dans : 12th International Symposium on Friction Stir Welding , 26-28 June 2018, Saguenay, Québec.

Fofana Issouf. (2013). 50 years in the development of insulating liquids. IEEE Electrical Insulation Magazine, 29, (5), p. 13-25.

Fofana Issouf, Ben Rhouma A., Beroual Abderrahmane et Auriol Ph. (1998). Modelling a positive lightning downward leader to study its effects on engineering systems. IEE proceedings. Generation, transmission and distribution, 145, (4), p. 395-402.

Fofana Issouf et Beroual Abderrahmane. (1998). Induced effects on an overhead line due to nearby positive lightning downward leader. Electric Power Systems Research, 48, (2), p. 105-119.

Fofana Issouf et Beroual Abderrahmane. (1996). A model for long air gap discharge using an equivalent electrical network. IEEE Transactions on Dielectrics and Electrical Insulation, 3, (2), p. 273-282.

Fofana Issouf et Beroual Abderrahmane. (1995). Modelling of the leader current with an equivalent electrical network. Journal of Physics D: Applied Physics, 28, (2), p. 305-313.

Fofana Issouf et Beroual Abderrahmane. (1996). A new proposal for calculation of the leader velocity based on energy considerations. Journal of Physics D: Applied Physics, 29, (3), p. 691-696.

Fofana Issouf et Beroual Abderrahmane. (1997). A predictive model of the positive discharge in long air gaps under pure and oscillating impulse shapes. Journal of Physics D: Applied Physics, 30, (11), p. 1653-1667.

Fofana Issouf et Beroual Abderrahmane. (1998). Predischarge models of dielectric liquids. Japanese Journal of Applied Physics, 37, (5R), p. 2540-2547.

Fofana Issouf, Beroual Abderrahmane et Rakotonandrasana J.H.. (2013). Application of dynamic models to predict switching impulse withstand voltages of long air gaps. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (1), p. 89-97.

Fofana Issouf, Borsi H. et Gockenbach E.. (2001). Fundamental investigations on some transformers liquids under various outdoor conditions. IEEE Transactions on Dielectrics and Electrical Insulation, 8, (6), p. 1040-1047.

Fofana Issouf, Borsi H., Gockenbach E. et Farzaneh Masoud. (2007). Aging of transformer insulating materials under selective conditions. European Transactions on Electrical Power, 17, (5), p. 450-470.

Fofana Issouf, Bouaïcha Abdelghafour, Farzaneh Masoud, Sabau John, Bussières Denis et Robertson E.B.. (2010). Decay products in the liquid insulation of power transformers. IET Electric Power Applications, 4, (3), p. 177-184.

Fofana Issouf, Bouaïcha Abdelghafour, Farzaneh Masoud, Volat Christophe et Sabau John. (2009). On the stability of mineral insulating oils under electrical stress. 2009 IEEE Electrical Insulation Conference, 2009, (10779745), p. 482-486.

Fofana Issouf, Bouaïcha Amine et Farzaneh Masoud. (2011). Characterization of aging transformer oil–pressboard insulation using some modern diagnostic techniques. European Transactions on Electrical Power, 21, p. 1110-1127.

Fofana Issouf, Bouslimi Y., Hemmatjou Hossein, Volat Christophe et Taheri K.. (2014). Relationship between static electrification of transformer oils with turbidity and spectrophotometry measurements. International Journal of Electrical Power & Energy Systems, 54, p. 38-44.

Fofana Issouf et Farzaneh Masoud. (2007). Application of dynamic model to Flashover of ice-covered insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1410-1417.

Fofana Issouf, Farzaneh Masoud, Hemmatjou Hossein et Volat Christophe. (2008). Study of discharge in air from the tip of an icicle. IEEE Transactions on Dielectrics and Electrical Insulation, 15, (3), p. 730-740.

Fofana Issouf et Hadjadj Yazid. (2016). Electrical-based diagnostic techniques for assessing insulation condition in aged transformers. Énergies, 9, (9), p. 1-26.

Fofana Issouf, Hemmatjou Hossein et Farzaneh Masoud. (2010). Low temperature and moisture effects on polarization and depolarization currents of oil-paper insulation. Electric Power Systems Research, 80, (1), p. 91-97.

Fofana Issouf, Hemmatjou Hossein et Meghnefi Fethi. (2011). Effect of Thermal Transient on the Polarization and Depolarization Current Measurements of Oil-Paper Insulation. IEEE Transactions on Dielectrics and Electrical Insulation, 18, (2), p. 513-520.

Fofana Issouf, Hemmatjou Hossein, Meghnefi Fethi, Farzaneh Masoud, Setayeshmehr A., Borsi H. et Gockenbach E.. (2010). On the frequency domain dielectric response of oil-paper insulation at low temperatures. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (3), p. 799-807.

Fofana Issouf, N'cho Janvier Sylvestre, Bétié Amidou, Hounton Épiphane, Meghnefi Fethi et Yapi Kouba Marie Lucia. (2020). Lessons to learn from post-installation pollution levels assessment of some distribution insulators. Energies, 13, (16), p. 4064.

Fofana Issouf, Sabau John et Bétié Amidou. (2015). Measurement of the relative free radical content of insulating oils of petroleum origin. Energies, 8, (8), p. 7690-7702.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2002). Challenge of mixed insulating liquids for use in high-voltage transformers. Part. 1: Investigation of mixed liquids. IEEE Electrical Insulation Magazine, 18, (3), p. 18-31.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2002). Challenge of mixed insulating liquids for use in high-voltage transformers. Part. II: Investigations of mixed liquid impregnated paper insulation. IEEE Electrical Insulation Magazine, 18, (4), p. 5-16.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2004). Drying of transformer insulation using zeolite. IEEE Electrical Insulation Magazine, 20, (1), p. 20-30.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2002). Preliminary investigations for the retrofilling of perchlorethylene based fluid filled transformer. IEEE Transactions on Dielectrics and Electrical Insulation, 9, (1), p. 97-103.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2001). Retrofilling conditions of high voltage transformers. IEEE Electrical Insulation Magazine, 17, (2), p. 17-30.

Fofana Issouf, Wasserberg V., Borsi Hossein, Gockenbach E. et Farzaneh Masoud. (2006). Specific investigations to quantify heavy damage causes on loading resistor modules. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (3), p. 593-600.

Fontaine Réjean, Otis Martin J.-D., Jarry Martin, Semmaoui Hicham, Gosselin Marie-Ève, Masson Patrice et Ménard Hugues. Conception d'un BioMicroRobot autonome. Dans : The 2nd Annual IEEE Northeast Workshop on Circuits and Systems, NEWCAS , 20-23 June 2004, Montreal, Canada.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2018). Robust icephobic, and anticorrosive plasma polymer coating. Cold Regions Science and Technology, 151, p. 89-93.

Fortin Guy, Adomou Maryelle et Perron Jean. (2011). Experimental study of hybrid anti-icing systems combining thermoelectric and hydrophobic coatings. SAE Technical Papers, 380003,

Fortin Guy, Beisswenger Arlene et Perron Jean. Centrifuge adhesion test to evaluate icephobic coatings. Dans : AIAA Atmospheric and Space Environments Conference , 2-5 August 2010, Toronto, Ontario.

Fortin Guy, Enneji Ilham, Beisswenger Arlene et Perron Jean. (2011). Experimental study of snow precipitation over a generic deicing fluid without fluid flow. SAE Technical Papers, 380045,

Fortin Guy, Ilinca Adrian et Laforte Jean-Louis. (2004). Modèle d'accrétion de glace sur un objet bidimensionnel fixe appliquable aux pales d'éoliennes. VertigO, 5, (1),

Fortin Guy, Ilinca Adrian, Laforte Jean-Louis et Brandi Vincenzo. (2004). New roughness computation method and geometric accretion model for airfoil icing. Journal of Aircraft, 41, (1), p. 119-127.

Fortin Guy, Laforte Jean-Louis et Ilinca Adrian. (2006). Heat and mass transfer during ice accretion on aircraft wings with an improved roughness model. International Journal of Thermal Sciences, 45, (6), p. 595-606.

Fortin Guy, Mayer Christine et Perron Jean. (2008). Icing wind tunnel study of a wind turbine blade deicing system : simulation of deicing wind turbine blades with controlled electro-thermal systems. SEA Technology, 49, (9), p. 41-44.

Fortin Guy et Perron Jean. (2012). Ice adhesion models to predict shear stress at shedding. Journal of Adhesion Science and Technology, 26, (4-5), p. 523-553.

Fortin Guy et Perron Jean. Spinning Rotor Blade tests in icing wind tunnel. Dans : 1st AIAA Atmospheric and Space Environments Conference , 22 - 25 June 2009, San Antonio, Texas.

Fortin Guy et Perron Jean. Temperature drop of a wet wing at takeoff. Dans : 43rd AIAA Aerospace Sciences Meeting and Exhibit , 10-13 January, 2005, Reno, Nevada.

Fortin Guy et Perron Jean. Wind turbine icing and de-icing. Dans : 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition , 6-7 january, 2009, Orlando, Florida.

Fortin Guy, Perron Jean et Ilinca Adrian. Behaviour and modeling of cup anemometers under icing conditions. Dans : IWAIS XI : International workshop on atmospheric icing of structures , June 2005, Montreal, Québec.

Fortin Guy, Perron Jean et Ilinca Adrian. Étude des événements de givrage à Murdochville : conclusions pour l'industrie éolienne. Dans : Colloque international Énergie éolienne et sites éloignés , 19-21 Octobre 2005, Îles de la Madeleine.

Fortin Guy, Perron Jean, Mingione Guiseppe et Luliano Emiliano. CIRAAMIL ice accretion code improvement. Dans : 1st AIAA Atmospheric and Space Environments Conference , 22-25 June 2009, San Antonio, Texas.

Fortin Pascal E., Otis Martin J.-D., Duchaine Vincent et Cooperstock Jeremy R.. Event-based haptic vibration synthesis using a recursive filter for lower limb prosthetics. Dans : IEEE International Symposium on Haptic, Audio and Visual Environments and Games (HAVE) , 10-11 Oct. 2014, Richardson, TX.

Fotso Talla Aimé Sylvain, Erchiqui Fouad, Godard F. et Kocaefe Duygu. (2016). An evaluation of the thermal degradation kinetics of novel melt processed PET–hemp fiber composites. Journal of Thermal Analysis and Calorimetry, 126, p. 1387-1396.

Foulon Thomas, Saeidi Ali, Chesnaux Romain, Nastev Miroslav et Rouleau Alain. (2017). Spatial distribution of soil shear-wave velocity and the fundamental period of vibration : a case study of the Saguenay region, Canada. Georisk, p. 1-13.

Fraser Kirk A., St-Georges Lyne et Kiss László. (2014). Optimization of friction stir welding tool advance speed via Monte-Carlo simulation of the friction stir welding process. Materials, 7, p. 3435-3452.

Fu Shipeng, Meng Weihua, Jeon Gwanggil, Chehri Abdellah, Zhang Rongzhu et Yang Xiaomin. (2020). Two-path network with feedback connections for pan-sharpening in remote sensing. Remote Sensing, 12, (10), p. 1674.

Gaborit Gwenaël, Gillette Laurane, Revillod Guillaume, Dahdah Jean, Duvillaret Lionel, Volat Christophe, Pons Christian, Bic Emmanuel, Giannini Laura et Dumont Erwan. (2016). Electrical diagnostics of high voltage devices via high resolution near field analysis. Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 555-558). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Gaborit Gwenaël, Jarrige Pierre, Lecoche Frédéric, Dahdah Jean, Duraz Eric, Volat Christophe et Duvillaret Lionel. (2014). Single shot and vectorial characterization of intense electric field in various environments with pigtailed electrooptic probe. IEEE Transactions on Plasma Science, 42, (5), p. 1265-1273.

Gagnon David, Brassard Jean-Denis, Ezzaidi Hassan et Volat Christophe. (2020). Computer-assisted aircraft anti-icing fluids endurance time determination. Aerospace, 7, (4), p. 39-53.

Gagnon David, Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. Qualitative risk of falling assessment based on gait abnormalities. Dans : IEEE International Conference on Systems, Man, and Cybernetics , 13-16 Oct. 2013, Manchester, United Kingdom.

Gagnon David, Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. A serious game for the learning of vibrotactile feedbacks presented under the foot : how many and how fast? Dans : 4th International Conference on Serious Games Development and Applications SGDA 2013 - Serious Games Development and Applications , 25-27 Sep, 2013, Trondheim, Norway.

Gheribi Aïmen E., Poncsák Sándor, Kiss Làszlò, Guérard Sébastien, Bilodeau Jean-François et Chartrand Patrice. (2017). Experimental determination of the thermal diffusivity of α-Cryolite up to 810 K and comparison with first principles predictions. ACS Omega, 2, (5), p. 2224-2230.

Gillenwater Daniel, Masson Christian et Perron Jean. Wind turbine performance during icing events. Dans : 46th AIAA Aerospace Sciences Meeting & Exhibit , 7-10 January 2008, Reno, Nevada.

Gillette Laurane, Gaborit Gwenaël, Volat Christophe, Dahdah Jean, Lecoche Frédéric, Jarrige Pierre et Duvillaret Lionel. (2014). Optical sensor for the diagnostic of high voltage equipment. 2014 IEEE Electrical Insulation Conference (EIC), 2014, (14501817), p. 142-146.

Girard Pierre-Luc, Marceau Daniel, Kocaefe Duygu, Bouazara Mohamed, Kallel Walid et Coulombe Patrick. Numerical investigation of the load free permanent strain in carbon anode during baking process. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Girard Sébastien, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Experimental exploration of the aluminum tube drawing process for producing variable wall thickness components used in light structural applications. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Gonos Ioannis F. et Fofana Issouf. (2020). Special Issue "Selected Papers from the 2018 IEEE International Conference on High Voltage Engineering (ICHVE 2018)". Energies, 13, (18), p. 4959.

Goulet Patrice, Laberge Carl, Lacroix René, Kiss László et Perron Jean. Modeling of the coke bed used in the electrical preheat of an aluminum reduction cell. Dans : Light Metals 2003: Proceedings of the technical sessions presented by the TMS Aluminium Committee at the 132nd TMS Annual Meetings , 2-6 March 2003, San Diego, CA.

Guérin Frédéric, Laforte Caroline, Farinas Marie-Isabelle et Perron Jean. (2016). Analytical model based on experimental data of centrifuge ice adhesion tests with different substrates. Cold Regions Science and Technology, 121, p. 93-99.

Guglielmetti Aurore, Buiron Nicolas, Marceau Daniel, Rachik M. et Volat Christophe. (2012). Modelling of tubes magnetic pulse welding. Dans Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis 2012. (2012, p. 561-572). New York, NY : American Society of Mechanical Engineers.

Hadjadj Yazid, Fofana Issouf, Sabau John et Briosso E.. (2015). Assessing insulating oil degradation by means of turbidity and UV/VIS spectrophotometry measurements. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2653-2660.

Hadjadj Yazid, Fofana Issouf, van de Voort F. R. et Bussières Denis. (2016). Potential of determining moisture content in mineral insulating oil by fourier transform infrared spectroscopy. IEEE Electrical Insulation Magazine, 32, (1), p. 34-39.

Hadjadj Yazid, Meghnefi Fethi, Fofana Issouf et Ezzaidi Hassan. (2013). On the feasibility of using poles computed from Frequency Domain Spectroscopy to assess oil impregnated paper insulation conditions. Energies, 6, (4), p. 2204-2220.

Hall Glenn, Ezzaidi Hassan, Bahoura Mohammed et Volat Christophe. (2013). Classification of pizzicato and sustained articulations. 21st European Signal Processing Conference (EUSIPCO 2013), 2013, p. 1-5.

Hamdi Ahmed, Fofana Issouf et Djillali Mahi. (2017). Stability of mineral oil and oil–ester mixtures under thermal ageing and electrical discharges. IET Generation, Transmission & Distribution, 11, (9), p. 2384-2392.

Han Yu-Mei et Chen X-Grant. (2015). Electrochemical behavior of Al-B₄C metal matrix composites in NaCl solution. Materials, 8, (9), p. 6455-6470.

Hedir Abdallah, Lamrous Omar, Fofana Issouf, Slimani Ferhat et Moudoud Mustapha. (2021). Critical issues in XLPE-based polymer nanocomposites and their blends. Dans Crosslinkable polyethylene based blends and nanocomposites. (p. 63-83). Materials Horizons: From Nature to Nanomaterials book series (MHFNN). Singapore : Springer.

Hemmatjou Hossein, Farzaneh Masoud et Fofana Issouf. (2007). Modeling of the AC Arc discharge on snow-covered insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1390-1400.

Hermosilla-Lara Guillaume, Momen Gelareh, Marty Philippe, Le Neindre B. et Hassouni Khaled. (2007). Hydrogen storage by adsorption on activated carbon: Investigation of the thermal effects during the charging process. International Journal of Hydrogen Energy, 32, (10-11), p. 1542-1553.

Hermosilla-Lara Guillaume, Momen Gelareh, Marty Philippe, Leneindre B. et Hassouni Khaled. (2005). Hydrogen storage by adsorption on activated carbon: experimental and numerical study. Dans Proceedings of the 2nd European Hydrogen Energy Conference, Zaragoza (Spain) Nov 22-25, 2005. (p. 213-214). Amsterdam : Elsevier.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2021). Recent progress in the anti-icing performance of slippery liquid-infused surfaces. Progress in Organic Coatings, 151, e106096.

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. Icing simulation of wind-turbine blades. Dans : 45th AIAA Aerospace Sciences Meeting and Exhibit , 8-11 January 2007, Reno, Nevada.

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. (2008). Wind turbine performance under icing conditions. Wind Energy, 11, (4), p. 319-333.

Hu Mingxuan, He Min, Su Wei et Chehri Abdellah. (2020). A TextCNN and WGAN-gp based deep learning frame for unpaired text style transfer in multimedia services. Multimedia Systems,

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Morphological and microstructural characterization of bio-coke as potential anode raw material for aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Characterization of carbon anode materials by image analysis. Light Metals, p. 859-864.

Huang Xianai, Kocaefe Duygu, Boluk Yaman, Kocaefe Yasar S. et Pichette André. (2012). Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids. European Journal of Wood and Wood Products, 70, (5), p. 711-717.

Huang Xianai, Kocaefe Duygu, Boluk Yaman et Krause Cornelia. (2013). Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weathering. Applied Surface Science, 264, p. 117-127.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as a raw material for carbon anode production. Energy Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as raw material for carbon anode production. Energy and Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Interaction of bio-coke with different coal tar pitches. Fuel, 179, p. 179-192.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Wettability of bio-coke by coal tar pitch for its use in carbon anodes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 490, p. 133-144.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Changes in wettability of heat-treated wood due to artificial weathering. Wood Science and Technology, 46, (6), p. 1215-1237.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). A spectrocolorimetric and chemical study on color modification of heat-treated wood during artificial weathering. Applied Surface Science, 258, (14), p. 5360-5369.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Study of the degradation behavior of heat-treated jack pine (Pinus banksiana) under artificial sunlight irradiation. Polymer Degradation and Stability, 97, (7), p. 1197-1214.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Pichette André. (2018). Combined effect of acetylation and heat treatment on the physical, mechanical and biological behavior of jack pine (Pinus banksiana) wood. European Journal of Wood and Wood Products, 76, (2), p. 525-540.

Huang Xianai, Kocaefe Duygu, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Coulombe Patrick. (2016). Investigation on the structure of carbonized pitch and calcined coke-carbonized pitch interface in carbon anodes by etching. Journal of Materials Research, 31, (22), p. 3513-3521.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2016). Fabrication of corrosion resistance micro-nanostructured superhydrophobic anodized aluminum in a one-step electrodeposition process. Metals, 6, (3), p. 47.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2011). Fabrication of Superhydrophobic Surfaces on Aluminum Alloy Via Electrodeposition of Copper Followed by Electrochemical Modification. Nano-Micro Letters, 3, (3), p. 160-165.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2010). A one-step process to engineer superhydrophobic copper surfaces. Materials Letters, 64, (24), p. 2722-2724.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied Surface Science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied surface science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process. Applied Surface Science, 237, p. 327-334.

Huang Ying, Sarkar Dilip K., Gallant Danick et Chen X-Grant. (2013). Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process. Applied Surface Science, 282, p. 689-694.

Ibrahim Hussein, Dimitrova Mariya Hristova, Dutil Yvan, Rousse Daniel, Ilinca Adrian et Perron Jean. Wind-diesel hybrid system : energy storage system selection method. Dans : The 12th International Conference on Energy Storage - InnoStock 2012 , 16-18 May 2012, Espagne.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Feasibility study of a wind-diesel compressed air power plant. Dans : AWEA Windpower 2011 Conference & Exhibition , May 22-25 2011, Anaheim, CA.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2009). A hybrid wind-diesel-compressed air system for remote telecom infrastructures = Système hybride éolien-diesel avec stockage d'air comprimé pour l'électrification d'une station de télécommunications isolée. European Journal of Electrical Engineering, 12, (5-6), p. 701-731.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Investigation of electricity production with a wind-diesel-compressed air energy storage system for Nordic remote villages. Dans : 2nd International Conference on Energy Conversion and Conservation - CICME'10 , April 22-25, 2010, Hammamet, Tunisia.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Optimisation de l'efficacité du moteur diesel pour un système hybride éolien-diesel : validation expérimentale. Dans : CSME FORUM 2010 - Proceedings of The Canadian Society for Mechanical Engineering Forum 2010 , June 7-9, 2010, Victoria, Colombie-britannique.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Étude et conception d'un système hybride éolien-diesel-air comprimé pour l'électrification d'une station de télécommunications isolée. Dans : CanWEA 2010 Conference and Exhibition , 1-3 novembre, 2010, Montreal, Quebec.

Ibrahim Hussein, Dimitrova Mariya Hristova, Rousse Daniel, Ilinca Adrian et Perron Jean. Générateur éolien-diesel avec stockage d'énergie : critères de choix du système de stockage. Dans : Xe Colloque interuniversitaire franco-québécois sur la Thermique des systèmes , 20 au 22 juin 2011, Saguenay, Québec.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Comparison and analysis of different energy storage techniques based on their performance index. Dans : 2007 IEEE Canada Electrical Power Conference, EPC 2007 , 25-26 October 2007, Montreal, Quebec.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Energy storage systems : characteristics and comparisons. Renewable and Sustainable Energy Reviews, 12, (5), p. 1221-1250.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Integration of wind turbines with compressed air energy storage in remote area power supply system. Dans : European Wind Energy Conference & Exhibition 2012 (EWEC 2012) , 16-19 March 2012, Copenhagen, Denmark.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Investigation des différentes alternatives renouvelables et hybrides pour l'électrification des sites isolés : rapport interne. Université du Québec à Rimouski, Laboratoire de recherche en énergie éolienne, Université du Québec à Chicoutimi, Laboratoire international des matériaux antigivre.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Investigation on the performances of energy storage techniques. Dans : 21st Canadian Congress of Applied Mechanics : proceedings, 21 CANCAM 2007, Department of Mechanical & Industrial Engineering , 2007, June 3-7, Ryerson University, Toronto, Ontario.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Moteur diesel suralimenté : bases et calculs, cycles réel, théorique et thermodynamique : rapport interne. Université du Québec à Rimouski - Laboratoire de recherche en énergie éolienne LREE, Université du Québec à Chicoutimi - Laboratoire international des matériaux antigivre LIMA.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Solutions actuelles pour une meilleure gestion et intégration de la ressource éolienne. Dans : CSME/SCGM Forum 2008 - The Canadian society for mechanical engineering , 5-8 juin, 2008, Ottawa, Canada.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Solutions de stockage de l'énergie éolienne : rapport interne. UQAR - Laboratoire de recherche groupe éolien LRGE.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Systèmes de stockage de l'énergie pour les éoliennes = Wind turbine storage systems. Dans : Colloque international Énergie éolienne et sites éloignés , 19-21 octobre 2005, les de la Madeleine, Québec.

Ibrahim Hussein, Ilinca Adrian, Perron Jean et Merabet Adel. Modeling and simulation of a novel small-scale compressed air hybrid system for stand-alone off-grid applications. Dans : 2013 IEEE Electrical Power and Energy Conference, EPEC 2013 : Innovative Leadership for Renewable Energy , August 21-23, 2013, Marriott Harbourfront Hotel, Halifax, Nova Scotia.

Ibrahim Hussein, Ilinca Adrian, Rousse Daniel, Dutil Yvan et Perron Jean. Analyse des systèmes de génération d’électricité pour les sites isolés basés sur l’utilisation du stockage d’air comprimé en hybridation avec un jumelage éolien-diesel. Dans : CONFREGE 2012 - Conférence francophone sur l'éco-conception en génie électrique , 28-30 Mai 2012, Montréal, Québec.

Ibrahim Hussein, Ilinca Adrian, Younès Rafic, Perron Jean et Basbous Tammam. Study of a hybrid wind-diesel system with compressed air energy storage. Dans : IEEE Canada Electrical Power Conference, 2007 : EPC 2007 , 25 - 26 October 2007, Montreal, Quebec.

Ibrahim Hussein, Sing Ramdenee Drishty, Rousse Daniel, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. Générateur éolien-diesel avec stockage d'air comprimé : aspects thermiques. Dans : Xe Colloque interuniversitaire franco-québécois sur la Thermique des systèmes , 20 au 22 juin 2011, Saguenay, Québec.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. (2010). Study and design of a hybrid wind-diesel-compressed air energy storage system for remote areas. Applied Energy, 87, (5), p. 1749-1762.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian et Perron Jean. (2007). Investigation des générateurs hybrides d'électricité de type éolien-air comprimé. Revue des énergies renouvelables, p. 47-50.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Ramdenee D., Dimitrova Mariya Hristova, Perron Jean, Adegnon M., Boulay D. et Arbez C.. (2011). Potential of a hybrid wind-diesel-compressed air system for nordic remote canadian areas. Energy Procedia, 6, p. 795-804.

Imbeault-Nepton Thomas et Otis Martin J.-D.. Synchronized walking cadence for TUG in perturbed environments : using Earcon or Tacton cues? Dans : 2014 IEEE International Symposium on Haptic, Audio and Visual Environments and Games (HAVE) , 10-11 Oct. 2014, Richardson, TX.

Issa Ali, Hakem Nadir, Kandil Nahi et Chehri Abdellah. (2020). Performance analysis of mobile network software testbed. Dans Human centred intelligent systems. (p. 305-319). Smart Innovation, Systems and Technologies. Singapore : Springer.

Jabbari Marouane, Volat Christophe et Farzaneh Masoud. (2013). A new single-arc AC dynamic FEM model of arc propagation on ice surfaces. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642123), p. 360-364.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2014). Application of a new dynamic numerical model to predict polluted insulator flashover voltage. 2014 IEEE Electrical Insulation Conference (EIC), 2014, (14501800), p. 102-106.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2018). Comparison of different residual resistance calculation methods used in predictive insulator flashover models. 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 2018, (18304515), p. 301-304.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2018). Development of a new bi-arc dynamic numerical model for modeling AC flashover processes of EHV ice-covered insulators. Energies, 11, (10), p. 2792-2814.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2018). Numerical modelling of ice-covered insulator flashover : the influence of arc velocity and arc propagation criteria. Energies, 11, (10), p. 2807.

Jafari Reza, Chameau Marc, Farzaneh Masoud et Momen Gelareh. (2018). Superhydrophobic and highly oleophilic polystyrene fibers (PS) with delayed freezing time and effective oil adsorption.

Jafari Reza, Chameau Marc, Farzaneh Masoud et Momen Gelareh. (2018). Superhydrophobic and highly oleophilic polystyrene fibers (PS) with delayed freezing time and effective oil adsorption. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, ). Switzerland : Materials Science Forum.

Jafari Reza, Cloutier Come, Allahdini Anahaita et Momen Gelareh. (2019). Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces. The International Journal of Advanced Manufacturing Technology, 103, p. 1225-1238.

Jafari Reza, Momen Gelareh et Eslami Esmaeil. (2018). Fabrication of icephobic aluminium surfaces by atmospheric plasma jet polymerisation. Surface Engineering, 35, (5), p. 450-455.

Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2016). Durability enhancement of icephobic fluoropolymer film. Journal of Coatings Technology and Research, 13, (3), p. 405-412.

Javadi H., Farzaneh Masoud, Hemmatjou Hossein et Fofana Issouf. (2008). An analytic model to simulate leakage current of a snow‐covered insulator. European Transactions on Electrical Power, 18, (4), p. 403-422.

Javan-Mashmool Mandana, Volat Christophe et Farzaneh Masoud. (2006). A new method for measuring ice adhesion strength at an ice–substrate interface. Hydrological Processes, 20, (4), p. 645-655.

Javidani Mousa. (2015). Effect of Cu, Mg and Fe on solidification processing and microstructure evolution of Al-7Si based foundry alloys. Thèse de doctorat, Université Laval.

Javidani Mousa, Arreguin-Zavala J., Danovitch J., Tian Y. et Brochu M.. (2017). Additive manufacturing of AlSi10Mg alloy using direct energy deposition: microstructure and hardness characterization. Journal of Thermal Spray Technology, 26, (4), p. 587-597.

Javidani Mousa, Fortier Martin et Colbert Josée. (2019). Impact of the main casting process parameters on floating crystals in Al alloy DC-Cast ingots. Dans : Light Metals 2019 TMS Annual Meeting & Exhibition , March 10-14, 2019, San Antonio, Texas.

Javidani Mousa et Larouche Daniel. (2014). Application of cast Al–Si alloys in internal combustion engine components. International Materials Reviews, 59, (3), p. 132-158.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Jemmali Mohamed Ali, Otis Martin J.-D. et Ellouze Mahmoud. (2019). Robust stabilization for discrete-time Takagi-Sugeno fuzzy system based on N4SID models. Engineering Computations, 36, (4), p. 1400-1427.

Jeon Gwanggil, Ahmad Awais, Chehri Abdellah et Cuomo Salvatore. (2020). Special issue on video and imaging systems for critical engineering applications [SI 1096]. Multimedia Tools and Applications, 79, p. 8327-8335.

Jeon Gwanggil, Bellandi Valerio et Chehri Abdellah. (2020). Editorial for the Special Issue “Advanced Machine Learning for Time Series Remote Sensing Data Analysis”. Remote Sensing, 12, (17), p. 2815.

Jeon Gwanggil et Chehri Abdellah. (2020). Entropy-based algorithms for signal processing. Entropy, 22, (6), p. 621.

Jeon Gwanggil et Chehri Abdellah. (2021). Security analysis using deep learning in IoT and Intelligent Transport System. Dans Smart Transportation Systems 2021. (). Smart Innovation, Systems and Technologies. Singapore : Springer.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2020). Evolution of dispersoids and their effects on elevated-temperature strength and creep resistance in Al-Si-Cu 319 cast alloys with Mn and Mo additions. Materials Science and Engineering: A, 770, p. 138554.

Kallel Walid, Marceau Daniel, Kocaefe Duygu, Girard Pierre-Luc, Racine Dany et Coulombe Patrick. Evolution of mechanical properties of carbon anodes during baking. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Kamali Kaveh, Akbari Ali Akbar, Desrosiers Christian, Akbarzadeh Alireza, Otis Martin J.-D. et Ayena Johannes C.. (2020). Low-rank and sparse recovery of human gait data. Sensors, 20, (16), p. 1-13.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Hot tearing of aluminum-copper B206 alloys with iron and silicon additions. Materials Science and Engineering A : Structural Materials: Properties, Microstructure and Processing, 527, (27-28), p. 7413-7423.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2012). Mechanical properties of aluminium-copper B206 alloys with iron and silicon additions. International Journal of Cast Metals Research, 25, (1), p. 15-25.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Solidification of aluminum-copper B206 alloys with iron and silicon additions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, (11), p. 2844-2855.

Kassi Koutoua Simon, Farinas Marie-Isabelle, Fofana Issouf et Volat Christophe. (2016). Analysis of aged oil on the cooling of power transformers from computational fluid dynamics and experimental measurements. Journal of Applied Fluid Mechanics, 9, (SI 2), p. 235-243.

Kassi Koutoua Simon, Fofana Issouf, Farinas Marie-Isabelle et Volat Christophe. (2015). Aging effect on oil cooling capacity of a non-guided disc windings power transformer. Dans 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). (2015, ). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Kassi Koutoua Simon, Fofana Issouf, Farinas Marie-Isabelle et Volat Christophe. (2016). Studying power transformers cooling effectiveness from computational fluid dynamics approach. Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 13-16). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Kassi Koutoua Simon, Fofana Issouf, Meghnefi Fethi et Yéo Zié. (2015). Impact of local overheating on conventional and hybrid insulations for power transformers. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2543-2553.

Kassi Koutoua Simon, Fofana Issouf, Megnefhi Fethi, Bétié Amidou, Yéo Zié et Perron Jean. Comparative study between conventional and hybrid solid insulation systems. Dans : 2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2014 , 19-22 October 2014, Des Moines, IA.

Khelil Nawel et Otis Martin J.-D.. (2016). Finite-time stabilization of homogeneous non-Lipschitz systems. Mathematics, 4, (58), p. 1-14.

Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Method for analyzing an anode and device thereof. .

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Comparison of weathering behavior of heat-treated jack pine during different artificial weathering conditions. Dans : 4th International Conference on Fluid Mechanics and Heat & Mass Transfer (FLUIDSHEAT'13) , June 25-27, 2013, Dubrovnik, Croatia.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Study of the degradation of heat-treated jack pine under different artificial weathering conditions. International Journal of Energy and Environment, 7, (3), p. 97-106.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. Study on the surface changes of heat-treated aspen wood due to aging by different techniques. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Quantitative characterization of chemical degradation of heat-treated wood surfaces during artificial weathering using XPS. Surface and Interface Analysis, 45, (2), p. 639-649.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. Study of weathering behavior of jack pine heat-treated under different conditions. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Study of weathering behavior of jack pine heat-treated under different conditions. Journal of Energy and Power Engineering, 7, p. 818-826.

Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. Measurement of anode electrical resistivity for quality control in aluminium industry. Dans : 53rd annual Conference of Metallurgists , 28 September -1 October 2014, Vancouver, British Colombia.

Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sanogo Bazoumana, Ahoutou Yao, Sun Hang et Coulombe Patrick. (2017). Development of techniques and tools for the determination of carbon anode quality. Light Metals, p. 1247-1254.

Kocaefe Duygu, Kocaefe Yasar S. et Oumarou Noura. A novel high temperature heat treatment process for wood. Dans : 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 20-23 July 2015, South Africa.

Kocaefe Duygu, Kocaefe Yasar S., Younsi Ramdane, Oumarou Noura et Lekounougou S. Thierry. (2013). Mathematical modelling of the high temperature treatment of birch in a prototype furnace. Advances in Mechanical Engineering, 5,

Kocaefe Duygu et Saha Sudeshna. (2012). Comparison of the protection effectiveness of acrylic polyurethane coatings containing bark extracts on three heat-treated North American wood species: Surface degradation. Applied Surface Science, 258, (13), p. 5283-5290.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. (2013). Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Journal of Energy and Power Engineering, 7, p. 1198-1205.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interaction between coke and pitch in anode manufacturing. Light Metals, p. 1045-1050.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interactions between coke and pitch in anode manufacturing. Dans Light Metals 2013. (p. 1045-1050). The Minerals, Meatls & Materials Series. Switzerland AG : Springer, Cham.

Kocaefe Duygu, Sarkar Arunima, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. Utilization of artificial neural network to analyze and predict the influence of different parameters on anode properties. Dans : 11th Australasian Aluminium Smelting Technology Conference , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Duygu, Sarkar Dilip K. et Chen X-Grant. (2012). Effect of Ti addition on the wettability of Al-B4C metal matrix composites. International Journal of materials research, 103, (6), p. 729-736.

Kocaefe Duygu, Xie Yadian, Kocaefe Yasar S., Wei Liu, Zou Shaoling et Wu Anjing. (2013). Thermogravimetric study on devolatilization kinetics of Chinalco anodes during baking. Journal of Materials Science Research, 2, (2), p. 22-34.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. Modelling of high temperature heat treatment of wood using thermowood technology. Dans : 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 19-21 July 2010, Antalya, Turkey.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. (2011). Recipe adaptation and new recipe development for high temperature heat treatment of North American wood species. International Journal of Energy, Environment, and Economics, 19, (3), p. 257-278.

Kocaefe Yasar S., Baiteche Mounir, Oumarou Noura, Kocaefe Duygu et Morais Brigitte. Different mathematical modelling approaches to predict the horizontal anode baking furnace performance. Dans : 11th Australasian Aluminium Smelting Technology , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Yasar S., Kocaefe Duygu et Bhattacharyay Dipankar. (2015). Quality control via electrical resistivity measurement of industrial anodes. Light Metals, p. 1097-1102.

Kocaefe Yasar S., Kocaefe Duygu, Bhattacharyay Dipankar, Benzaoui Abderrahmane et Desmeules Jean-François. (2020). Testing of SERMA technology on industrial anodes for quality control for aluminum production. Light Metals, 2020, p. 1189-1195.

Kocaefe Yasar S., Kocaefe Duygu et Gauthier Bruno. Impact of the form of a trailer on its aerodynamic performance. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Yasar S., Oumarou Noura, Baiteche Mounir, Kocaefe Duygu, Morais Brigitte et Gagnon Marc. (2013). Use of mathematical modelling to study the behavior of a horizontal anode baking furnace. Light Metals, p. 1139-1144.

Kocaefe Yasar S., Oumarou Noura et Kocaefe Duygu. Comparison of the 1D and 3D models for the simulation of wood heat treatment process. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Yasar S., Simard G., Bui Rung-Tien, Charette André, Potocnik Vinko et Perron Jean. Analyzing the heat transfer in a coke calcining kiln. Dans : Light metals 1992 : proceedings of the technical sessions presented by the TMS Light Metals Committee at the 121st TMS annual meeting , March 1-5, 1992, San Diego, California.

Kone Gbah et Volat Christophe. (2018). Comparison of the volume and surface approaches to compute temperature and electric field along the stress-grading on stators bars. Annual report - Conference on Electrical Insulation and Dielectric Phenomena, 2018, (8544739), p. 461-464.

Kone Gbah et Volat Christophe. (2016). Numerical investigation of transient potential distribution along stress-grading on stators bars (Roebel Type). Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 9-12). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Kone Gbah, Volat Christophe et Ezzaidi Hassan. (2014). 3D numerical investigation of internal defects in a 28 kV composite insulator. 2014 IEEE Electrical Insulation Conference (EIC), 2014, (14501859), p. 208-212.

Kone Gbah, Volat Christophe et Ezzaidi Hassan. (2017). Numerical investigation of electric field distortion induced by internal defects in composite insulators. High Voltage, 2, (4), p. 253-260.

Kone Gbah, Volat Christophe, Ezzaidi Hassan et Duvillaret Lionel. (2016). Experimental investigation of internal defect detection of a 69-kV composite insulator. Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 260-263). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Kone Gbah, Volat Christophe, Hudon Claude et Bernier Simon. (2020). Experimental investigation of the spatial and temporal evolution of the tangential and normal E-Field components along the stress grading system of a real stator bar. Energies, 13, (3), p. 534.

Laforte Caroline, Blackburn Caroline et Perron Jean. A review of icephobic coating performances over the last decade. Dans : SAE Technical Paper Series - SAE 2015 International Conference on Icing of Aircraft, Engines, and Structures , June 22-25, 2015, Prague, Czech Republic.

Laforte Caroline, Blackburn Caroline, Perron Jean et Aubert Roger J.. (2014). Icephobic coating evaluation for aerospace applications. Dans : 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference , 13-17 January 2014, National Harbor, Maryland.

Laforte Caroline, Brassard Jean-Denis et Volat Christophe. (2019). Extended evaluation of icephobic coating regarding their field of application. Dans IWAIS 2019. (2019, p. 1-5). International Workshop on the Atmospheric Icing of Structures.

Laforte Caroline et Laforte Jean-Louis. (2012). Deicing strains and stresses of iced substrates. Journal of Adhesion Science and Technology, 26, (4-5), p. 603-620.

Laforte Caroline et Tremblay Marc Mario. (2017). Comparative evaluation of the anti-icing protection time of runway deicers using infrared thermography. Cold Regions Science and Technology, 138, p. 57-62.

Laforte Jean-Louis, Allaire M. A. et Laflamme J.. (1998). State-of-the-art on power line de-icing. Atmospheric Research, 46, (1-2), p. 143-158.

Laforte Jean-Louis, Louchez Patrick R. et Bouchard Gilles. (1992). Cold and humid environment simulation for de/anti-icing fluids evaluation. Cold Regions Science and Technology, 20, (2), p. 195-206.

Lafrance Jean, Sawyer Edward W., Barnes Sarah-Jane et Severson Mark J.. Contamination of mafic magmas by crustal material in the layered-igneous Complex of Duluth, Minnesota. Dans : IGCP Project 427 - Abstracts from the 1999 field conference in Rouyn-Noranda on Ore Forming Processes in Dynamic Magmatic Systems , 15-17 July 1999, Rouyn-Noranda, QC.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing : From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing: From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2014). Atmospheric icing impact on wind turbine production. Cold Regions Science and Technology, 100, p. 36-49.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2013). Atmospheric icing severity : quantification and mapping. Atmospheric Research, 128, p. 57-75.

Lamraoui Fayçal, Fortin Guy, Perron Jean et Benoit Robert. (2015). Canadian icing envelopes near the surface and its impact on wind energy assessment. Cold Regions Science and Technology, 120, p. 76-88.

Larouche Daniel et Javidani Mousa. (2015). Mathematical analysis of the heat measured by a power-compensated differential scanning calorimeter during the solidification of a multiphase alloy. Journal of Thermal Analysis and Calorimetry, 122, (1), p. 197-205.

Lazrag Hilmi, Chehri Abdellah, Saadane Rachid et Rahmani Moulay Driss. (2020). Efficient and secure routing protocol based on Blockchain approach for wireless sensor networks. Concurrency and Computation : Practice and Experience, e6144.

Lekounougou S. Thierry et Kocaefe Duygu. (2013). Bioresistance of thermally-modified Populus tremuloides (North American Aspen) wood against four decay fungi. International Wood Products Journal, 4, (1), p. 46-51.

Lekounougou S. Thierry et Kocaefe Duygu. (2012). Comparative study on the durability of heat-treated White Birch (Betula papyrifera) subjected to the attack of brown and white rot fungi. Wood Material Science & Engineering, 7, (2), p. 101-106.

Lekounougou S. Thierry et Kocaefe Duygu. (2014). Durability of thermally modified Pinus banksiana (Jack pine) wood against brown and white rot fungi. International Wood Products Journal, 5, (2), p. 92-97.

Lekounougou S. Thierry et Kocaefe Duygu. (2014). Effect of thermal modification temperature on the mechanical properties, dimensional stability, and biological durability of black spruce (Picea mariana). Wood Material Science & Engineering, 9, (2), p. 59-66.

Lekounougou S. Thierry, Kocaefe Duygu, Oumarou Noura, Kocaefe Yasar S. et Poncsák Sándor. (2011). Effect of thermal modification on mechanical properties of Canadian White Birch (Betula papyrifera). International Wood Products Journal, 2, (2), p. 101-107.

Li Chen, Liu Kun et Chen X-Grant. (2020). Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology, 39, p. 135-143.

Li Dong, Liu Kun et Chen X-Grant. (2020). Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02003),

Li J. S., Raoelison R. N., Sapanathan T., Zhang Zhan, Chen X-Grant, Marceau Daniel, Hou Y. L. et Rachik M.. (2020). An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. Applied Physics Letters, 116, (161601),

Li Ping, Meziane Ramy, Otis Martin J.-D., Ezzaidi Hassan et Cardou Philippe. A Smart Safety Helmet using IMU and EEG sensors for analysis of worker’s fatigue. Dans : IEEE International Symposium on Robotic and Sensors Environments (ROSE) , 16-18 Oct 2014, Timisoara, Romania.

Liu Kun et Chen X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

Liu Kun et Chen X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

Liu Kun, Li Chen et Chen X-Grant. (2020). Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (03001),

Liu Kun, Nabawy Ahmed et Chen X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2020). Quench sensitivity and phase transformation kinetics of AlSi7MnMg high pressure vacuum die casting. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02001),

Loiselle Luc et Fofana Issouf. Influence de la qualité de l’huile isolante sur le refroidissement des transformateurs de puissance. Dans : Xe Colloque interuniversitaire Franco-québécois sur la thermique des systèmes , 20-22 juin 2011, Saguenay, Québec.

Loiselle Luc, Fofana Issouf et Hume D.. Influence of transformer oil decay products on its thermal conductivity. Dans : 31st International thermal conductivity conference (ITCC) and the 19th International thermal expansion symposium (ITES) , June 26-30, 2011, Chicoutimi, Québec.

Loiselle Luc, Fofana Issouf, Olivares-Galvan Juan C. et Campero E.. Stability of environmental friendly fluids under electrical and thermal stresses. Dans : Conference Record of the 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012) , 10-13 june 2012, San Juan, Puerto Rico.

Loiselle Luc, Fofana Issouf et Sabau J.. Influence of ageing by-products on the stability of some transformer fluids. Dans : 2012 CIGRÉ Canada conférence, Hilton Montréal Bonaventure , Septembre 24-26, 2012, Montréal, Québec.

Loiselle Luc, Fofana Issouf, Sabau John, Magdaleno-Adame Salvador et Olivares-Galvan Juan Carlos. (2015). Comparative studies of the stability of various fluids under electrical discharge and thermal stresses. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2491-2499.

Loiselle Luc, Mohan Rao U. et Fofana Issouf. (2020). Gassing tendency of fresh and aged mineral oil and ester fluids under electrical and thermal fault conditions. Energies, 31, (13), p. 2472.

Loiselle Luc, Mohan Rao U. et Fofana Issouf. (2020). Influence of ageing on oil degradation and gassing tendency under high-energy electrical discharge faults for mineral oil and synthetic ester. High Voltage, 5, (6), p. 731-738.

Loiselle Luc, Mohan Rao U. et Fofana Issouf. (2020). Influence of aging on oil degradation and gassing tendency for mineral oil and synthetic ester under low energy discharge electrical faults. Energies, 13, (3), p. 595.

Loiselle Luc, Mohan Rao U., Fofana Issouf et Jaya T.. (2020). Monitoring colloidal and dissolved decay particles in ester dielectric fluids. IEEE Transactions on Dielectrics and Electrical Insulation, 27, (5), p. 1516-1524.

Loubeba Bekri Oum El Fadhel, Chehri Abdellah, Djamah Tounsia et Fellah Mohamed Karim. (2020). SVC device optimal location for voltage stability enhancement based on a combined particle swarm optimization-continuation power flow technique. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18, (4), p. 2101-2111.

Louchez P. R., Laforte Jean-Louis, Bouchard Gilles et Farzaneh Masoud. (1995). Laboratory evaluation of aircraft ground de/antiicing products. International Journal of Offshore and Polar Engineering, 5, (1),

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Coulombe Patrick. (2016). Study of the wettability of coke by different pitches and their blends. Energy and Fuels, 30, (11), p. 9210-9216.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Morais Brigitte. (2016). Study of the wetting of coke by different pitches. Light Metals, p. 871-876.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Huang Xianai et Bhattacharyay Dipankar. (2017). The wettability of coke by pitches with different quinoline-insoluble contents. Fuel, 199, p. 587-597.

Ma K., Liu Z. Y., Liu Kun, Chen X-Grant, Xiao B. L. et Ma Zheyuan. (2021). Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon, 178, p. 190-201.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2016). Development of a Nanodielectric TiO2 coating based on silicone rubber. Dans NANO 2016 – XIIIth International Conference on Nanostructured. (2016, 2016, ). Lund, Sweden : International Committee on Nanostructured Materials.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2016). Development of a stable TiO2 nanocomposite self-cleaning coating for outdoor applications. Advances in Materials Science and Engineering, 2016, e7958152.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2018). Dielectric properties of TiO2/Silicone Rubber micro- and nanocomposites. Advances in Materials Science and Engineering, 2018, e4682076.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2013). Effect of filler concentration on dielectric properties of RTV silicone rubber/TiO2 nanocomposite. Dans 2013 IEEE Electrical Insulation Conference (EIC). (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Magdaleno-Adame Salvador, Olivares-Galvan Juan C., Escarela-Perez R., Fofana Issouf, Loiselle Luc et Georgilakis P. S.. Study of parameters influencing the performance of connectors used for load and temperature tests on transformers. Dans : Conference Record of the 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012) , 10-13 june 2012, San Juan, Puerto Rico.

Maghsoudi Khosrow, Jafari Reza et Momen Gelareh. (2017). Micro-nanostructured polymer surfaces using injection molding : a review. Materials today communications, 13, p. 126-143.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2017). Micro-nanostructured polymer surfaces using injection molding: A review. Materials today communications, 13, p. 126-143.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured silicone rubber surfaces using compression molding.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured Silicone Rubber Surfaces Using Compression Molding. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, 2018, ). Switzerland : Materials Science Forum.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured silicone surfaces for highvoltage application. Dans : 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 21-24 Oct. 2018, Cancun, Mexico.

Maghsoudi Khosrow, Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2020). Evaluating the effect of processing parameters on the replication quality in the micro compression molding of silicone rubber. Materials and Manufacturing Processes, 35, (14), p. 1567-1575.

Maghsoudi Khosrow, Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2020). Advances in the fabrication of superhydrophobic polymeric surfaces by polymer molding processes. Industrial & Engineering Chemistry Research, 59, (20), p. 9343-9363.

Maghsoudi Khosrow, Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2021). Icephobicity and durability assessment of superhydrophobic surfaces: the role of surface roughness and the ice adhesion measurement technique. Journal of Materials Processing Technology, 288,

Maier Wolfgang D., Halkoaho Tapio, Huhma Hannu, Hanski Eero et Barnes Sarah-Jane. Petrogenesis of PGE reefs in the Penikat intrusion, Finland. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Mansur Eduardo T. et Barnes Sarah-Jane. (2020). The role of Te, As, Bi, Sn and Sb during the formation of platinum-group-element reef deposits: Examples from the Bushveld and Stillwater Complexes. Geochimica et Cosmochimica Acta, 272, p. 235-258.

Mansur Eduardo T., Barnes Sarah-Jane, Duran Charley J. et Sluzhenikin Sergey F.. (2020). Distribution of chalcophile and platinum-group elements among pyrrhotite, pentlandite, chalcopyrite and cubanite from the Noril’sk-Talnakh ores: implications for the formation of platinum-group minerals. Mineralium Deposita, 55, p. 1215-1232.

Mayer C., Ilinca Adrian, Fortin Guy et Perron Jean. (2007). Wind tunnel study of the electro-thermal de-icing of wind turbine blades. International Journal of Offshore and Polar Engineering, 17, (3), p. 182-188.

Mayer C., Ilinca Adrian, Fortin Guy et Perron Jean. Wind tunnel study of the electro-thermal de-icing of wind turbine blades. Dans : Proceedings of the 17th International Offshore and Polar Engineering Conference (ISOPE) , July 1-6, 2007, Lisbon, Portugal.

Meftali Nadia, Bouazabia Slimane, Fofana Issouf et El Maouhab Ali. (2018). Effect of injection barrier height on charge transport under bipolar injection. International Journal of Numerical Modelling, 32, (1), e2478.

Meghnefi Fethi, Farzaneh Masoud et Volat Christophe. (2005). Characterization of leakage current of a post station insulator covered with ice with various surface conductivities. CEIDP '05. 2005 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2005, p. 333-336.

Meghnefi Fethi, Farzaneh Masoud et Volat Christophe. (2008). Measurement of the evolution of dripping water conductivity of an ice-covered insulator during a melting period. 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2008, (10468513), p. 236-239.

Meghnefi Fethi, Volat Christophe et Farzaneh Masoud. (2007). Temporal and frequency analysis of the leakage current of a station post insulator during ice accretion. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1381-1389.

Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. Design of a serious game for learning vibrotactile messages. Dans : IEEE International Workshop on Haptic Audio Visual Environments and Games (HAVE) , 8-9 Oct 2012, Munich, Germany.

Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. A serious game for training balance control over different types of soil. Dans : International Conference on Serious Games Development and Applications (SGDA) , September 26-29, 2012, Bremen, Germany.

Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. Use of foot for direct interactions with entities of a virtual environment displayed on a mobile device. Dans : IEEE International Conference on Systems, Man and Cybernetics - SMC , 13-16 Oct. 2013, Manchester, United Kingdom.

Meysami A. H., Ghasemzadeh R., Seyedein S. H., Aboutalebi M. R., Ebrahimi R. et Javidani Mousa. (2009). Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching. Journal of Iron and Steel Research International, 16, (6), p. 47-51.

Meziane Ramy, Cardou Philippe et Otis Martin J.-D.. (2019). Cable interference control in physical interaction for cable-driven parallel mechanisms. Mechanism and Machine Theory, 132, p. 30-47.

Meziane Ramy, Li Ping, Otis Martin J.-D., Ezzaidi Hassan et Cardou Philippe. Safer hybrid workspace using human-robot interaction while sharing production activities. Dans : 2014 IEEE International Symposium on Robotic and Sensors Environments (ROSE) , 16–18 October 2014, Timişoara, Romania.

Meziane Ramy, Otis Martin J.-D. et Ezzaidi Hassan. (2017). Human-robot collaboration while Sharing Production Activities in Dynamic Environment : SPADER system. Robotics and Computer-Integrated Manufacturing, 48, p. 243-253.

Millet Guillaume, Otis Martin J.-D. et Cooperstock Jeremy R.. Vibration-induced friction control for walkway locomotion interface. Dans : 2013 IEEE International Conference on Systems, Man and Cybernetics - SMC , 13-16 Oct. 2013, Manchester, United Kingdom.

Millet Guillaume, Otis Martin J.-D., Horodniczy Daniel et Cooperstock Jeremy R.. (2017). Design of variable-friction devices for shoe-floor contact. Mechatronics, 46, p. 115-125.

Mohan Rao U., Fofana Issouf, Beroual Abderrahmane, Rozga P., Pompili M., Calcara L. et Rapp Kevin J.. (2020). A review on pre-breakdown phenomena in ester fluids: Prepared by the international study group of IEEE DEIS liquid dielectrics technical committee. IEEE Transactions on Dielectrics and Electrical Insulation, 27, (5), p. 1546-1560.

Mohan Rao U., Fofana Issouf, Bétié Amidou, Senoussaoui M.L., Brahami Mostefa et Briosso Eduardo. (2019). Condition monitoring of in-service oil-filled transformers: Case studies and experience. IEEE Electrical Insulation Magazine, 35, (6), p. 33-42.

Mohan Rao U., Fofana Issouf, Jaya T., Rodriguez-Celis Esperanza, Jalbert Jocelyn et Picher Patrick. (2019). Alternative dielectric fluids for transformer insulation system: progress, challenges, and future prospects. IEEE Access, 7, p. 184552-184571.

Mohan Rao U., Fofana Issouf, Kartheek R., Yapi K. M. L. et Jaya T.. (2019). Mineral oil and ester based oil/paper insulation decaying assessment by FTIR measurements. Dans : ISH 2019: Proceedings of the 21st International Symposium on High Voltage Engineering , 26 au 30 août 2019, Budapest, Hongrie.

Mohan Rao U., Fofana Issouf et Loiselle Luc. (2019). Preliminary studies on soluble and colloidal decomposition products in ester filled transformers. Dans : 2019 IEEE 20th International Conference on Dielectric Liquids (ICDL) , 23-27 June 2019, Roma, Italy.

Mohan Rao U., Fofana Issouf et N'cho Janvier Sylvestre. (2020). On some imperative IEEE Standards for usage of natural ester liquids in transformers. IEEE Access, 8, p. 145446-145456.

Mohan Rao U., Verma Anant K., Darimireddy Naresh K., Fofana Issouf, Park Chan-Wang et Vedik B.. (2021). Perspectives of convertors and communication aspects in automated vehicles, Part 1: Convertors and condition monitoring. Energies, 14, (7), p. 1795.

Momen Gelareh, Allahdini Anahita et Jafari Reza. (2020). Self-healing coating for anti-icing application. Dans : Smart Coatings 2020 , February 26-28, 2020, Orlando, Florida, US.

Momen Gelareh, Allahdini Anihita et Jafari Reza. (2020). Development of icephobic PDMS coatings by a hybrid approach. Dans : Smart Coatings 2020 , February 26-28, 2020, Orlando, Florida, US.

Momen Gelareh et Farzaneh Masoud. (2014). Facile approach in the development of icephobic hierarchically textured coatings as corrosion barrier. Applied surface science, 299, p. 41-46.

Momen Gelareh et Farzaneh Masoud. (2011). Simple process to fabricate a superhydrophobic coating. Micro & Nano Letters, 6, (6), p. 405-407.

Momen Gelareh et Farzaneh Masoud. (2011). Study of ice accumulation on nanocomposite semiconducting coatings. Dans 2010 Annual Report Conference on Electrical Insulation and Dielectic Phenomena. (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Momen Gelareh et Farzaneh Masoud. (2012). Superhydrophobic RTV silicone rubber coatings on anodized aluminium surfaces. Materials Science Forum, 706-709, p. 2546-2551.

Momen Gelareh et Farzaneh Masoud. (2011). Survey of micro/nano filler use to improve silicone rubber for outdoor insulators. Reviews on Advanced Materials Science, 27, (1), p. 1-13.

Momen Gelareh et Farzaneh Masoud. (2012). A ZnO-based nanocomposite coating with ultra water repellent properties. Applied Surface Science, 258, (15), p. 5723-5728.

Momen Gelareh, Farzaneh Masoud et Carreira Antony Jé. (2011). Icephobic and superhydrophobic silicone rubber coatings for outdoor insulators. Dans : IWAIS 2011 : the 14th International Workshop on Atmospheric Icing of Structures , May 8-13, 2011, Chongqing, China.

Momen Gelareh, Farzaneh Masoud et Jafari Reza. (2011). Wettability behaviour of RTV silicone rubber coated on nanostructured aluminium surface. Applied Surface Science, 257, (15), p. 6489-6493.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Firdaous Mohamed, Leneindre Bertrand, Madec Laurent et Hassouni Khaled. (2005). Numerical simulation of hydrogen storage under high pressure in porous packed bed. Dans : IHEC International Hydrogen Energy Congress & Exhibition, 2005 , 2005, Istambul, Turkey.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Pons M., Firdaous Mohamed et Hassouni Khaled. (2009). Hydrogen storage in an activated carbon bed: Effect of energy release on storage capacity of the tank. International Journal of Hydrogen Energy, 34, (9), p. 3799-3809.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Pons M., Firdaous Mohamed, Marty Philippe et Hassouni Khaled. (2009). Experimental and numerical investigation of the thermal effects during hydrogen charging in packed bed storage tank. International Journal of Heat and Mass Transfer, 52, (5-6), p. 1495-1503.

Momen Gelareh et Jafari Reza. (2018). Ingénierie biomimétique pour développer des surfaces glaciophobes. Dans : 86e Congrès de l'ACFAS , 7-11 May 2018, Saguenay, Québec.

Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2015). Ice repellency behaviour of superhydrophobic surfaces: Effects of atmospheric icing conditions and surface roughness. Applied surface science, 349, p. 211-218.

Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2013). On the oil repellency of nanotextured aluminum surface. International Journal of Materials and Metallurgical Engineering, 7, (6), p. 463-467.

Momen Gelareh, Jafari Reza, Fofana Issouf et Carrière J.. (2019). Protective coatings to prevent ice build-up on steel port structures. Dans : International Congress on Industrial Port Research , May 27-31, 2019, Sept-Îles, Québec.

Momen Gelareh, Jafari Reza et Hassouni Khaled. (2010). On the effect of process temperature on the performance of activated carbon bed hydrogen storage tank. International Journal of Thermal Sciences, 49, (8), p. 1468-1476.

Momen Gelareh, Madidi Fatima Zahra et Farzaneh Masoud. (2012). A one-step process to fabricate superhydrophobic nanocomposite coating. Dans : 4th International Conference on Nanostructures ICNS4 , March 12th-14th, 2012, Kish Island, Iran.

Moravej Maryam, Amira Sofiene, Prima Frédéric, Rahem Ahmed, Fiset Michel et Mantovani Diego. (2011). Effect of electrodeposition current density on the microstructure and the degradation of electroformed iron for degradable stents. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 176, (20), p. 1812-1822.

Motamedi Reza, Otis Martin J.-D. et Duchaine Vincent. (2017). The impact of simultaneously applying normal stress and vibrotactile stimulation for feedback of exteroceptive information. Journal of Biomechanical Engineering, 139, (6), 061004.

Nanfak Arnaud, Eke Samuel, Kom Charles Hubert, Mouangue Ruben et Fofana Issouf. (2021). Interpreting dissolved gases in transformer oil: A new method based on the analysis of labelled fault data. IET Generation, Transmission and Distribution, p. 1-16.

Nazari Babak, Ranjbar Zahra, Rafiei Hashjin Ra'na, Rezvani Moghaddam Amir, Momen Gelareh et Ranjbar Behnaz. (2019). Dispersing graphene in aqueous media: investigating the effect of different surfactants. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 582, e123870.

N'Cho J. S., Loiselle Luc, Fofana Issouf, Beroual A. et Aka-Ngnui T.. Parameters affecting the electrical and thermal properties of transformer oils. Dans : 2010 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP , October 17-20 2010, West Lafayette, USA.

N'cho Janvier Sylvestre et Fofana Issouf. (2020). Review of fiber optic diagnostic techniques for power transformers. Energies, 13, (7), p. 1789.

N'cho Janvier Sylvestre, Fofana Issouf, Aka-Ngnui Thomas et Beroual Abderrahmane. (2011). Effect of Exposure to Electrical Discharge on Transformer Oil Properties. High Voltage Engineering, 37, (11), p. 2793-2799.

N'cho Janvier Sylvestre, Fofana Issouf et Beroual Abderrahmane. (2020). Pretreatment of Fuller's earth with nitrogen. Heliyon, 6, (3), e03643.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2012). Aged oils reclamation : facts and arguments based on laboratory studies. IEEE Transactions on Dielectrics and Electrical Insulation, 19, (5), p. 1583-1592.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2011). The gassing tendency of various insulating fluids under electrical discharge. IEEE Transactions on Dielectrics and Electrical Insulation, 18, (5), p. 1616-1625.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2012). Verification of insulation oil reclamation by turbidity and spetrophotometry measurements. Journal of Energy and Power Engineering, 6, p. 703-712.

N'cho Janvier Sylvestre, Fofana Issouf, Hadjadj Yazid et Beroual Abderrahmane. (2016). Review of physicochemical-based diagnostic techniques for assessing insulation condition in aged transformers. Energies, 9, (5), p. 1-29.

N'cho Janvier Sylvestre, Fofana Issouf, Konan F. K. et Beroual Abderrahmane. (2020). Comparison of parameters in the formation of corrosive sulphide deposition on copper conductors. ARPN Journal of Engineering and Applied Sciences, 15, (3), p. 304-314.

Ndiaye Ibrahima, Farzaneh Masoud et Fofana Issouf. (2007). Study of the development of positive streamers along ice surface. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1436-1445.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2021). Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys. Materials Science and Engineering: A, 820, p. 141538.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels. Dans : The 17th International Conference on Aluminium Alloys 2020 (ICAA17) , October 26-29, 2020, Grenoble, France.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Optimization of mechanical properties and electrical conductivity in Al–Mg–Si 6201 alloys with different Mg/Si ratios. Journal of Materials Research, 35, (20), p. 2765-2776.

Noormohammed Saleema et Sarkar Dilip K.. (2021). Rf-sputtered Teflon®-modified superhydrophobic nanostructured titanium dioxide coating on aluminum alloy for icephobic applications. Coatings, 11, (4), p. 432.

Nuamah Rania Afia, Noormohammed Saleema et Sarkar Dilip K.. (2021). Pulsed reverse potential electrodeposition of carbon-free Ni/NiO nanocomposite thin film electrode for energy storage supercapacitor electrodes. Coatings, 11, (7), p. 780.

Olivares-Galvan Juan Carlos, Escarela-Perez R., Georgilakis P. S., Fofana Issouf et Magdaleno-Adame Salvador. (2012). A bibliographic analysis of transformer literature 1990-2000. Electrical and Electronic Engineering, 2, (3), p. 96-121.

Olivares-Galvan Juan Carlos, Escarela-Perez Rafael, Georgilakis Pavlos S. et Fofana Issouf. (2013). Evaluation of distribution transformer banks in electric power systems. International Transactions on Electrical Energy Systems, 23, (3), p. 364-379.

Otis Martin J.-D.. (2009). Analyse, commande et intégration d'un mécanisme parallèle entraîné par des câbles pour la réalisation d'une interface haptique comme métaphore de navigation dans un environnement virtuel. Thèse de doctorat, Université Laval.

Otis Martin J.-D.. (2013). Electromechanical characterization and locomotion control of IPMC BioMicroRobot. Advances in Materials Science and Engineering, 2013, p. 1-17.

Otis Martin J.-D., Adjelane Abid, Jomphe Éric et Youssef Khaled. (2017). Toilet assistive system designed for the reduction of accidental falls in the bathroom using admittance controller. Machines, 5, (4), p. 1-15.

Otis Martin J.-D., Ayena Cossoun Johannes, Tremblay Louis E., Fortin Pascal E. et Ménélas Bob-Antoine-Jerry. (2016). Use of an enactive insole for reducing the risk of falling on different types of soil using vibrotactile cueing for the elderly. PLoS ONE, 11, (9), e0162107.

Otis Martin J.-D., Bernier R., Pasco Y., Ménard H., Semmaoui Hicham, Jarry Martin et Fontaine R.. Development of an Hexapod BioMicroRobot with Nafion-Pt IPMC microlegs. Dans : Annual International Conference of the IEEE Engineering in Medicine and Biology Society , 17-21 Sept. 2003, Cancun, Mexico.

Otis Martin J.-D., Jarry Martin, Fontaine Réjean, Ménard Hugues et Masson Patrice. 3D Modelization of an hexapod BioMicroRobot propulsion system with IPMC actuators. Dans : 1st Annual IEEE Northeast Workshop on Circuits and Systems (NEWCAS '2003) , 17-20 June 2003, Montreal, Canada.

Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. Toward an augmented shoe for preventing falls related to physical conditions of the soil. Dans : IEEE International Conference on Systems, Man, and Cybernetics (SMC) , 14-17 Oct 2012, Seoul, Korea (South).

Otis Martin J.-D., Nguyen-Dang Thien-Ly, Laurendeau Denis et Gosselin Clément. Extremum seeking tuning for reel tension control in haptic application. Dans : 2nd Mediterranean Conference on Intelligent Systems and Automation Intelligent Systems and Automation (CISA’09) , 23–25 March 2009, Zarzis, Tunisia.

Otis Martin J.-D., Nguyen-Dang Thien-Ly, Laurendeau Denis et Gosselin Clément. Interference estimated time of arrival on a 6-DOF cable-driven haptic foot platform. Dans : IEEE International Conference on Robotics and Automation (ICRA) , 12-17 May 2009, Kobe, Japan.

Otis Martin J.-D., Perreault Simon, Nguyen-Dang Thien-Ly, Lambert Patrice, Gouttefarde Marc, Laurendeau Denis et Gosselin Clément. (2009). Determination and management of cable interferences between two 6-DOf foot platforms in a cable-driven locomotion interface. IEEE transactions on systems, man and cybernetics. Part A. Systems and humans, 39, (3), p. 528-544.

Ouafiq El Mehdi, Elrharras Abdessamad, Mehdary A., Chehri Abdellah, Saadane Rachid et Wahbi M.. (2020). IoT in smart farming analytics, big data based architecture. Dans Human centred intelligent systems. (p. 269-279). Smart Innovation, Systems and Technologies. Singapore : Springer.

Ouahmani Tarik El, Chehri Abdellah et Hakem Nadir. (2019). Bio-inspired routing protocol in VANET networks: A case study. Procedia Computer Science, 159, p. 2384-2393.

Ouardirhi Anas, Labbé David, Otis Martin J.-D., Segning Collins et Ngomo Suzy. (2017). Une application de réalité augmentée pour évaluer la performance motrice et ajuster les paramètres de stimulation transcranienne chez les personnes atteintes de la fibromyalgie. Dans : 2e congrès québécois de recherche en adaptation-réadaptation, INTER-REPAR , 18 au 19 mai 2017, Montréal, Québec.

Ouellet R., Bui Rung-Tien et Perron Jean. (1990). Numerical simulation of a casting furnace. Simulation, 54, (2), p. 92-100.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2014). 3D-modelling of conjugate heat and mass transfers: effects of storage conditions and species on wood high temperature treatment. International Journal of Heat and Mass Transfer, 79, p. 945-953.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2018). An advanced dynamic process model for industrial horizontal anode baking furnace. Applied Mathematical Modelling, 53, p. 384-399.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2016). Investigation of the refractory bricks used for the flue wall of the horizontal anode baking ring furnace. Ceramics International, 42, (16), p. 18436-18442.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2016). Transient process model of open anode baking furnace. Applied Thermal Engineering, 107, p. 1253-1260.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Chabot Jérôme. A dynamic process model for simulating horizontal anode baking furnaces. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Oumarou Noura, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. (2015). A dynamic process model for predicting the performance of horizontal anode baking furnaces. Light metals, p. 1081-1086.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2018). Modification of petroleum coke by different additives and the impact on anode properties. Canadian Journal of Chemical Engineering, 96, (8), p. 1707-1712.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2018). Modification of coke by different additives to improve anode properties. Fuel, 211, p. 102-109.

Pan Lei, Mirza Foisal Ahmed, Liu Kun et Chen X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Perreautl Simon, Cardou Philippe, Gosselin Clément et Otis Martin J.-D.. (2010). Geometric determination of the interference-free constant-orientation workspace of parallel cable-driven mechanisms. Journal of Mechanisms and Robotics, 2, (3),

Perron Éric, Louchez P. R. et Laforte Jean-Louis. (1996). Introductory analysis of boundary-layer development on de/anti-icing fluid. Journal of Aircraft, 33, (1), p. 74.

Perron Jean. (2019). An alternative to dark matter? A cosmological model of galaxy rotation using cosmological gravity force, FΛ (ALW). Preprints,

Perron Jean. (2021). An alternative to dark matter? Part 1 : The early universe (tp to 10-9 s), energy creation the alphaton, baryogenesis. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 784-807.

Perron Jean. (2021). An Alternative to Dark Matter? Part 3: An Open Universe (3 Gy to 76 Gy) Galaxies and Structures Rotation. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 844-872.

Perron Jean. (2021). An alternative to the dark matter? Part 2: A close universe (10−9 s to 3 Gy), galaxies and structures formation. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 808-843.

Perron Jean. (2021). Schwarzschild quantum light geodesics metric : a pair of BH-Inner WH. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 1089-1101.

Perron Jean et Auger Marc. Process for controlling rotary calcining kilns and control system therefor. .

Perron Jean, Bouvette Jean-François et Dupuis Marc. Optimization of anthracite calcination process in a vertical electric arc furnace. Dans : Light Metals: Proceedings of Sessions, TMS Annual Meeting , 1996, Warrendale, Pennsylvania.

Perron Jean et Bui Rung-Tien. (1994). Fours rotatifs : modèle dynamique du mouvement du lit. The Canadian Journal of Chemical Engineering, 72, (1), p. 16-26.

Perron Jean et Bui Rung-Tien. (1990). Rotary cylinders : solid transport prediction by dimensional and rheological analysis. The Canadian Journal of Chemical Engineering, 68, (1), p. 61-68.

Perron Jean et Bui Rung-Tien. (1992). Rotary cylinders : transverse bed motion prediction by rheological analysis. The Canadian Journal of Chemical Engineering, 70, (2), p. 223-231.

Perron Jean, Bui Rung-Tien, Charette André, Stevens W. et Dernedde E.. Computer simulation of an aluminum casting furnace. Dans : Light Metals, 1987: Proceedings of the Technical Sessions Sponsored by the TMS Light Metal Committee at the 116th Annual Meeting , February 24-26, 1987, Denver, Colorado.

Perron Jean, Bui Rung-Tien et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : I. le modèle. The Canadian Journal of Chemical Engineering, 70, (6), p. 1108-1119.

Perron Jean, Bui Rung-Tien et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : II. Simulation du procédé. The Canadian Journal of Chemical Engineering, 70, (6), p. 1120-1131.

Perron Jean, Castonguay Lise, Bui Rung-Tien et Nguyen H. T.. Optimization of coke calcining kiln operation using mathematical modelling. Dans : Light metals 1990 : proceedings of the technical sessions by the TMS Light Metals Committee at the 119 TMS annual meeting , February 18-22, 1990, Anaheim, California.

Perron Jean, Laforte Caroline, Quinlan Peter et Zimcik David. De-icing system and method = Procédé et système de dégivrage. .

Perron Jean et Larocque Jacques. Alumina crystalliser mixing using CFD. Dans : Light Metals: Proceedings of Sessions, TMS Annual Meeting , 1994, Warrendale, Pennsylvania.

Perron Jean et Larocque Jacques. (2013). Alumina Crystallizer Mixing Using CFD. Dans Essential Readings in Light Metals: Alumina and Bauxite, Volume 1. (p. 563-569). Hoboken, N.J. : John Wiley.

Perron Jean, Potocnik Vinko et Bui Rung-Tien. Modelling of the coke calcining kiln. Dans : CIM 1988 - 27th Annual conference of metallurgists : reduction and casting of aluminum Vol. 8 , August 28-31, 1988, Montréal, Canada.

Perron Jean, Proulx André L., Desgroseillers B. et Auger Marc. Petroleum coke calcination process improvement using a mathematical modelling tool and new kiln instrumentation. Dans : Proceedings of the technical sessions presented by TMS Light Metals committee at the 124th TMS Annual meeting , February 12-16, 1995, Las Vegas, Nevada.

Peyratout Jérémy. (2017). Conception, réalisation et mise en oeuvre d’un calcul de risque de chute en temps réel dans un micro-logiciel embarqué dans une semelle intelligente. Essai, Université du Québec à Chicoutimi.

Polesel Étienne. (2015). Étude de l’inclusion de la détection des activités humaines dans une cellule de travail hybride dédiée à la commande intelligente de robots via ROS en utilisant un réseau de capteurs portables sans fil. Rapport de stage et/ou d'intervention, UQAC.

Poncsák Sándor, Kiss László, Guérard Sébastien et Bilodeau Jean-François. (2017). Impact of the solidification rate on the chemical composition of frozen cryolite bath. Metals, 7, (3), p. 97.

Qian Cheng, Ménard Sylvain, Bard Delphine et Negreira Juan. (2019). Development of a vibroacoustic stochastic finite element prediction tool for a CLT floor. Applied Sciences, 9, (6), e1106.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effect of post-homogenisation cooling rate and Mn addition on Mg2Si precipitation and hot workability of AA6060 alloys. Canadian Metallurgical Quarterly, 59, (2), p. 189-200.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effects of Mn addition and related Mn-containing dispersoids on the hot deformation behavior of 6082 aluminum alloys. Materials Science and Engineering: A, 764, p. 138253.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing. Journal of Materials Science & Technology, 52, p. 189-197.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr. Journal of Materials Engineering and Performance, 26, (4), p. 1673-1684.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature. Journal of composite materials, 51, (18), p. 2643-2653.

Quadar Nordine, Chehri Abdellah et Jeon Gwanggil. (2020). Visual analytics methods for eye tracking data. Dans Human centred intelligent systems. (p. 3-12). Smart Innovation, Systems and Technologies. Singapore : Springer.

Quadar Nordine, Chehri Abdellah, Jeon Gwanggil et Ahmad Awais. (2020). Smart water distribution system based on IoT networks, a critical review. Dans Human centred intelligent systems. (p. 293-303). Smart Innovation, Systems and Technologies. Singapore : Springer.

Rahem Ahmed. (2001). Analyse non linéaire en grandes rotations et grands déplacements des structures minces métalliques. Thèse de doctorat, Université Laval.

Rakhmonov Jovid, Liu Kun et Chen X-Grant. (2020). Effects of compositional variation on the thermal stability of θ′-Al2Cu precipitates and elevated-temperature strengths in Al-Cu 206 alloys. Journal of Materials Engineering and Performance, 29, (11), p. 7221-7230.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content. Journal of Alloys and Compounds, 861, p. 157937.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2020). Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high-temperature exposure through dispersoid strengthening. Materials, 13, (22), p. 5295.

Rakhmonov Jovid, Qassem Mohamed, Larouche Daniel, Liu Kun, Javidani Mousa, Colbert Josée et Chen X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Rakotonandrasana J.H., Beroual Abderrahmane et Fofana Issouf. (2008). Modelling of the negative discharge in long air gaps under impulse voltages. Journal of Physics D: Applied Physics, 41, (10), p. 105210.

Rakotondramanana L., Kiss László, Poncsák Sándor, Guérard Sébastien et Bilodeau Jean-François. (2020). Mass transport by waves on the bath metal interface in electrolysis cell. Light Metals, 2020, p. 510-516.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu et Coulombe Patrick. (2017). 2-DOF dynamic model of vibro-compactor used for the carbon anodes block production. CIRP Journal of Manufacturing Science and Technology, 18, p. 45-52.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu et Morais Brigitte. (2013). Development of an analytical dynamic model of a vibro‐compactor used in carbon anode production. Light Metals, p. 1111-1115.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu, Morais Brigitte et Lagacé Charles-Luc. Physical and mechanical characterizations of carbon anodes produced from different vibro-compactors. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Rebaïne Fatma, Bouazara Mohamed, Rahem Ahmed et St-Georges Lyne. (2018). Static and vibration analysis of an aluminium and steel bus frame. World Journal of Mechanics, 8, (4), p. 112-135.

Regnima Guy-Oscar, Bétié Amidou, Koffi Thomas, Bagui Olivier K., Fofana Issouf, Kouacou Abaka et Zoueu Jérémie. (2018). Monitoring power transformers oils deterioration using structured laser illumination planar imaging. Measurement, 113, p. 38-45.

Robichaud Alexandre, Alameh Abdul Hafiz, Nabki Frederic et Deslandes Dominic. (2013). An agile matching network using phase detection for antenna tuning. Dans 2013 IEEE 20th International Conference on Electronics, Circuits, and Systems (ICECS). (2013, p. 755-758). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Robichaud Alexandre, Boudreault Martin et Deslandes Dominic. (2012). Comparison between inductance topologies for resonant wireless power transmission applications. 2012 Asia Pacific Microwave Conference Proceedings, 2012, p. 397-399.

Robichaud Alexandre, Boudreault Martin et Deslandes Dominic. (2012). Parametric analysis of helical resonators for resonant wireless power transmission links. Dans 10th IEEE International NEWCAS Conference. (2012, p. 405-408). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Robichaud Alexandre, Cicek Paul-Vahe, Deslandes Dominic et Nabki Frederic. (2018). Frequency tuning technique of piezoelectric ultrasonic transducers for ranging applications. Journal of Microelectromechanical Systems, 27, (3), p. 570-579.

Robichaud Alexandre, Deslandes Dominic, Cicek Paul-Vahe et Nabki Frederic. (2020). Electromechanical tuning of piecewise stiffness and damping for long-range and high-precision piezoelectric ultrasonic transducers. Journal of Microelectromechanical Systems, 29, (5), p. 1189-1198.

Robichaud Alexandre, Deslandes Dominic, Cicek Paul-Vahe et Nabki Frederic. (2018). A novel topology for process variation-tolerant piezoelectric micromachined ultrasonic transducers. Journal of Microelectromechanical Systems, 27, (6), p. 1204-1212.

Robichaud Alexandre, Deslandes Dominic, Cicek Paul-Vahé et Nabki Frederic. (2021). A system in package based on a piezoelectric micromachined ultrasonic transducer matrix for ranging applications. Sensors, 21, (8), p. 2590.

Robichaud Alexandre, Nabki Frederic et Deslandes Dominic. (2016). An efficient reference-based adaptive antenna impedance matching CMOS circuit. Dans 2016 IEEE International Symposium on Circuits and Systems (ISCAS). (2016, p. 1402-1405). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Ronneberg Sigrid, Laforte Caroline, Volat Christophe, He Jianying et Zhang Zhiliang. (2019). The effect of ice type on ice adhesion. AIP Advances, 9, (5), 055304.

Ronneberg Sigrid, Zhuo Yizhi, Laforte Caroline, He Jianying et Zhang Zhiliang. (2019). Interlaboratory study of ice adhesion using different techniques. Coatings, 9, (10), p. 678.

Rouget Geoffroy, Manolescu Petre, Picard Donald, Duchesne Carl, Alamdari Houshang et Kocaefe Duygu. Acoustic emission techniques to measure the properties of coke particles: a first foray. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Sabau John, Fofana Issouf, Bouaïcha Amine, Hadjadj Yazid et Farzaneh Masoud. (2010). An environmentally friendly dissolved oxygen and moisture removal system for freely breathing transformers. IEEE Electrical Insulation Magazine, 26, (3), p. 35-43.

Saber Mohammed, El Rharras Abdessamad, Saadane Rachid, Chehri Abdellah, Hakem Nadir et Kharraz Hatim. (2020). Spectrum sensing for smart embedded devices in cognitive networks using machine learning algorithms. Procedia Computer Science, 176, p. 2404-2413.

Saeidi Ali, Deck Olivier, Al Heib Marwan et Verdel Thierry. (2015). Development of a damage simulator for the probabilistic assessment of building vulnerability in subsidence areas. International Journal of Rock Mechanics and Mining Sciences, 73, p. 42-53.

Saeidi Ali, Deck Olivier, Al Heib Marwan, Verdel Thierry et Rouleau Alain. (2013). Adjusting the influence function method for subsidence prediction. Key Engineering Materials, 553, p. 59-66.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2013). Comparison of building damage assessment methods for risk analysis in mining subsidence regions. Geotechnical and Geological Engineering, 31, (4), p. 1073-1088.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2012). Development of building vulnerability functions in subsidence regions from analytical methods. Geotechnique, 62, (2), p. 107-120.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2009). Development of building vulnerability functions in subsidence regions from empirical methods. Engineering Structures, 31, (10), p. 2275-2286.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2011). Développement d’un simulateur de dommages pour l’évaluation de la vulnérabilité en zone d’aléa minier. Mines & carrières (hors-série), (185), p. 34-38.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2015). An extension of analytical methods for building damage evaluation in subsidence regions to anisotropic beams. European Journal of Environmental and Civil Engineering, 19, (6), p. 756-772.

Saeidi Ali, Maazallahi V. et Rouleau Alain. (2016). Assessment of slide surface and pre-slide topography using site investigation data in back analysis. International Journal of Rock Mechanics and Mining Sciences, 88, p. 29-33.

Safaee Alireza, Sarkar Dilip K. et Farzaneh Masoud. (2008). Superhydrophobic properties of silver-coated films on copper surface by galvanic exchange reaction. Applied Surface Science, 254, (8), p. 2493-2498.

Safiddine L., Hadj-Ziane Zafour Amel, Fofana Issouf, Skender Abdelhak, Guerbas Fettouma et Boucherit Ahmed. (2017). Transformer oil reclamation by combining several strategies enhanced by the use of four adsorbents. IET Generation, Transmission & Distribution, 11, (11), p. 2912-2920.

Safiddine Leila, Zafour Amel Hadj-Ziane, Mohan Rao Ungarala et Fofana Issouf. (2019). Regeneration of transformer insulating fluids using membrane separation technology. Energies, 12, (3), p. 368-381.

Saha Sudeshna, Kocaefe Duygu, Boluk Yaman et Pichette André. (2011). Enhancing exterior durability of jack pine by photo-stabilization of acrylic polyurethane coating using bark extract. Part 1: Effect of UV on color change and ATR–FT-IR analysis. Progress in Organic Coatings, 70, (4), p. 376-382.

Saha Sudeshna, Kocaefe Duygu, Boluk Yaman et Pichette André. (2013). Surface degradation of CeO2 stabilized acrylic polyurethane coated thermally treated jack pine during accelerated weathering. Applied Surface Science, 276, p. 86-94.

Saha Sudeshna, Kocaefe Duygu, Krause Cornelia et Larouche Tommy. (2011). Effect of titania and zinc oxide particles on acrylic polyurethane coating performance. Progress in Organic Coatings, 70, (4), p. 170-177.

Saha Sudeshna, Kocaefe Duygu, Sarkar Dilip K., Boluk Yaman et Pichette André. (2011). Effect of TiO2-containing nano-coatings on the color protection of heat-treated jack pine. Journal of Coatings Technology and Research, 8, (2), p. 183-190.

Saleema Noormohammed, Farzaneh Masoud, Paynter Royston W. et Sarkar Dilip K.. (2011). Prevention of ice accretion on aluminum surfaces by enhancing their hydrophobic properties. Journal of Adhesion Science and Technology, 25, p. 27-40.

Saleema Noormohammed, Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2012). Polymer masks fabrication by micropatterning surfaces of composite polymer coatings. Journal of Adhesion Science and Technology, 26, (22), p. 2531-2541.

Saleema Noormohammed, Sarkar Dilip K., Gallant Danick, Paynter Royston W. et Chen X-Grant. (2011). Chemical Nature of Superhydrophobic Aluminium Alloy Surfaces Produced via a One-Step Process Using Fluoroalkyl-Silane in a Base Medium. ACS Applied Materials & Interfaces, 3, (12), p. 4775-4781.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W. et Chen X-Grant. (2010). Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Applied Materials & Interfaces, 2, (9), p. 2500-2502.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W., Gallant Danick et Eskandarian Masoomeh. (2012). A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications. Applied Surface Science, 261, p. 742-748.

Samad Abdallah, Tagawa Gitsuzo B., Morency François et Volat Christophe. (2020). Predicting rotor heat transfer using the viscous blade element momentum theory and unsteady vortex lattice method. Aerospace, 7, (7), p. 90.

Samad Abdallah, Villeneuve Éric, Blackburn Caroline, Morency François et Volat Christophe. (2021). An experimental investigation of the convective heat transfer on a small helicopter rotor with anti-icing and de-icing test setups. Aerospace, 8, (4), e96.

Samad Abdallah, Villeneuve Éric, Morency François et Volat Christophe. (2021). A numerical and experimental investigation of the convective heat transfer on a small helicopter rotor test setup. Aerospace, 8, (2), p. 53.

Sanjeeva Reddy B. R., Darimireddy Naresh K., Park Chan-Wang et Chehri Abdellah. (2021). Performance of reconfigurable antenna fabricated on flexible and non-flexible materials for band switching applications. Energies, 14, (9), p. 2553.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Coulombe Patrick. (2017). Prediction of contact angle of coke-pitch system from raw material properties using artificial neural network. International Journal of Engineering Inventions, 6, (4), p. 42-52.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Coulombe Patrick. (2016). Effect of coke granulometry on the properties of carbon anodes based on experimental study and ANN analysis. Journal of Materials Science Research, 5, (4), p. 63-78.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Lagacé Charles-Luc. (2014). Determination of contact angle from raw material properties using linear multivariable analysis. Light Metals, p. 1099-1104.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Pouliot Martin. Characterization of petroleum coke and butts used in anode manufacturing in aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sarkar Dilip K. et Morais Brigitte. (2016). Effect of crystallinity on the wettability of petroleum coke by coal tar pitch. Energy & Fuels, 30, (4), p. 3549-3558.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Dilip K., Bhattacharyay Dipankar, Morais Brigitte et Chabot Jérôme. (2014). Coke–pitch interactions during anode preparation. Fuel, 117, (part A), p. 598-607.

Sarkar Dilip K. et Farzaneh Masoud. (2008). Fabrication of PECVD-grown fluorinated hydrocarbon nanoparticles and circular nanoring arrays using nanosphere lithography. Applied Surface Science, 254, (13), p. 3758-3761.

Sarkar Dilip K. et Farzaneh Masoud. (2009). Superhydrophobic coatings with reduced ice adhesion. Journal of Adhesion Science and Technology, 23, p. 1215-1237.

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2008). Superhydrophobic properties of ultrathin rf-sputtered Teflon films coated etched aluminum surfaces. Materials Letters, 62, (8-9), p. 1226-1229.

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2010). Wetting and superhydrophobic properties of PECVD grown hydrocarbon and fluorinated-hydrocarbon coatings. Applied Surface Science, 256, (11), p. 3698-3701.

Sarkar Dilip K. et Paynter Royston W.. (2010). One-Step Deposition Process to Obtain Nanostructured Superhydrophobic Thin Films by Galvanic Exchange Reactions. Journal of Adhesion Science and Technology, 24, (6), p. 1181-1189.

Sarkar Dilip K. et Saleema Noormohammed. (2010). One-step fabrication process of superhydrophobic green coatings. Surface and Coatings Technology, 204, (15), p. 2483-2486.

Sassi Mohamed Amir, Otis Martin J.-D. et Campeau-Lecours Alexandre. (2017). Active stability observer using artificial neural network for intuitive physical human–robot interaction. International Journal of Advanced Robotic Systems, p. 1-16.

Sékongo B., Mohan Rao U., Fofana Issouf, Jabbari Marouane, Akre Simplice et Yeo Zie. (2020). Temperature dependence of the pre-breakdown and breakdown phenomena in natural esters under AC stress. IET Science, Measurement & Technology, 14, (9), p. 762-769.

Senoussaoui Mohammed El Amine, Brahami Mostefa et Fofana Issouf. (2021). Transformer oil quality assessment using random forest with feature engineering. Energies, 14, (7), p. 1809.

Seytashmehr Alireza, Fofana Issouf, Eichler Christian, Akbari Ali Akbar, Borsi Hossein et Gockenbach Ernst. (2008). Dielectric spectroscopic measurements on transformer oil-paper insulation under controlled laboratory conditions. IEEE Transactions on Dielectrics and Electrical Insulation, 15, (4), p. 1100-1111.

Shakeri H. R., Rahem Ahmed, Worswick M. J. et Mayer Robert. (2006). Failure mechanism and damage characterization in axially crushed AlMg3.5Mn aluminium tubes. Dans : The 45th International Conference of Metallurgists (COM 2006) , October 1-4, 2006, Montréal, Québec.

Shakiba Mohammad, Parson Nick et Chen X-Grant. (2016). Modeling the Effects of Cu content and deformation variables on the high-temperature flow behavior of dilute Al-Fe-Si alloys using an artificial neural network. Materials, 9, (7), p. 536.

Shaopeng Li, Snaiki Reda et Teng Wu. (2021). A knowledge‐enhanced deep reinforcement learning‐based shape optimizer for aerodynamic mitigation of wind‐sensitive structures. Computer-Aided Civil and Infrastructure Engineering, p. 1-14.

Sharma Teena, Chehri Abdellah et Fortier Paul. (2020). An efficient spectral/spatial OCDMA system using 2D BIBD code based on combinatorial constructions of galois field. Dans 2020 IEEE 92nd Vehicular Technology Conference (VTC2020-Fall) : proceedings. (p. 1-6). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Sharma Teena, Chehri Abdellah et Fortier Paul. (2021). Review of optical and wireless backhaul networks and emerging trends of next generation 5G and 6G technologies. Transactions on Emerging Telecommunications Technologies, 32, (3), e4155.

Sharma Teena, Chehri Abdellah, Fortier Paul, Ahmed Hassan Yousif, Zeghid Medien et Imtiaz Waqas A.. (2021). Optical code construction of 2D spectral/spatial BIBD codes for SAC-OCDMA systems. Applied Sciences, 11, (2), p. 783.

Sharma Teena, Chehri Abdellah, Fortier Paul et Saadane Rachid. (2021). Backhaul networks and TV White Spaces (TVWS) with implementation challenges in 5G: A review. Dans Innovations in Smart Cities Applications. (p. 954-965). Lecture Notes in Networks and Systems. Singapore : Springer.

Shi Cangji, Lai Jing et Chen X-Grant. (2014). Microstructural evolution and dynamic softening mechanisms of Al-Zn-Mg-Cu alloy during hot compressive deformation. Materials, 7, (1), p. 244-264.

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). Electrochemical synthesis of highly ordered polypyrrole on copper modified aluminium substrates. Applied Surface Science, 307, p. 589-592.

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). A versatile cost-effective and one step process to engineer ZnO superhydrophobic surfaces on Al substrate. Applied surface science, 311, p. 182-188.

Slalmi Ahmed, Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Jeon Gwanggil. (2021). Toward 6G: understanding network requirements and key performance indicators. Transactions on Emerging Telecommunications Technologies, 32, (3), e4201.

Slalmi Ahmed, Chaibi Hasna, Chehri Abdellah, Saadane Rachid, Jeon Gwanggil et Hakem Nadir. (2020). On the Ultra-Reliable and Low-Latency Communications for Tactile Internet in 5G Era. Procedia Computer Science, 176, p. 3853-3862.

Slalmi Ahmed, Chaibi Hasna, Saadane Rachid, Chehri Abdellah et Jeon Gwanggil. (2020). 5G NB‐IoT: Efficient network call admission control in cellular networks. Concurrency and Computation : Practice and Experience, e6047.

Slalmi Ahmed, Saadane Rachid, Chehri Abdellah et Kharraz Hatim. (2020). How will 5G transform industrial IoT: latency and reliability analysis. Dans Human centred intelligent systems. (p. 335-345). Smart Innovation, Systems and Technologies. Singapore : Springer.

Snaiki Reda et Wu Teng. (2020). An analytical model for rapid estimation of hurricane supergradient winds. Journal of Wind Engineering and Industrial Aerodynamics, 201, p. 104175.

Sun Hang, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Côté Jules et Coulombe Patrick. (2019). Colorimetric methods for determining Fe, V, and Ni contents in coke and anodes. Chemical Engineering Technology, 42, (5), p. 1011-1017.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2014). Electrical performance evaluation of EHV post insulators covered with ice under different air gap configurations. IEEE Transactions on Dielectrics and Electrical Insulation, 21, (6), p. 2619-2627.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2016). Empirical flashover model of EHV post insulators based on ISP parameter in cold environments. IEEE Transactions on Dielectrics and Electrical Insulation, 23, (1), p. 403-409.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2013). Equivalent surface conductivity of ice accumulated on insulators during development of AC and DC flashovers arcs. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (5), p. 1789-1798.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2014). Improved dynamic model of DC arc discharge on ice-covered post insulator surfaces. IEEE Transactions on Dielectrics and Electrical Insulation, 21, (2), p. 729-739.

Taheri Ledari Shamsodin, Gholami Ahmad, Fofana Issouf et Taheri Hamed. (2012). Modeling and simulation of transformer loading capability and hot spot temperature under harmonic conditions. Electric Power Systems Research, 86, p. 68-75.

Talhi M., Fofana Issouf et Flazi S.. (2013). Comparative study of the electrostatic charging tendency between synthetic ester and mineral oil. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (5), p. 1598-1606.

Talhi M., Fofana Issouf et Flazi S.. (2020). Impact of free radicals on the electrostatic charging tendency of transformer oils. Electrical Engineering, 102, p. 1265-1274.

Talhi M., Fofana Issouf et Flazi S.. (2016). Impact of various stresses on the streaming electrification of transformer oil. Journal of Electrostatics, 79, p. 25-32.

Tavakoli Zaniani Changiz, Farzaneh Masoud, Fofana Issouf et Beroual Abderrahmane. (2006). Dynamics and modeling of AC arc on surface of ice. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (6), p. 1278-1285.

Thomas Roger, Fraser Kirk A., Kiss László, Poncsák Sándor, Guérard Sébastien, Bilodeau Jean-François et Bonneau G.. (2020). Development of a mathematical model to simulate raft formation. Light Metals, 2020, p. 688-695.

Thongam Jogendra Singh, Beguenane Rachid, Tarbouchi Mohammed, Okou Aime Francis, Merabet Adel, Fofana Issouf et Bouchard Pierre. (2013). A rotor speed estimation algorithm in variable speed permanent magnet synchronous generator wind energy conversion system. International Journal of Robust and Nonlinear Control, 23, (16), p. 1880-1890.

Tông T.V.K, Louchez P. R. et Zouzou A.. (1997). Introductory analysis of draining and freezing of de-icing fluids. Cold Regions Science and Technology, 25, (3), p. 207-214.

Tremblay Marc Mario. (2010). 2010 Ballot Update of AS5901 B. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2010, Montréal, Québec.

Tremblay Marc Mario. (2015). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , November 2015, Montréal, Québec.

Tremblay Marc Mario. (2016). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , 31 octobre 2016, Montréal, Québec.

Tremblay Marc Mario. (2016). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2016, Savannah, GA.

Tremblay Marc Mario. (2017). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , 30 Octobre 2017, Montréal, Québec.

Tremblay Marc Mario. (2007). AS5901 Proposed Revisions. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2007, San Diego, CA.

Tremblay Marc Mario. (2010). AS5901 revision B 2010 ballot. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2010, Berlin, Allemagne.

Tremblay Marc Mario. (2011). AS5901 standard 2010 ballot revision B last update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2011, San Francisco, CA.

Tremblay Marc Mario. (2008). AS5901 standard next revision. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2008, Montréal, Québec.

Tremblay Marc Mario. (2009). AS5901 standard next revision. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2009, Charleston, South Carolina.

Tremblay Marc Mario. (2013). AS5901 standard potential changes for revision C. Dans : SAE G-12 ADF Subcommittee Meeting , May 2013, New Orleans, Louisiana.

Tremblay Marc Mario. (2009). AS5901 standard revision B status. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2009, Montréal, Québec.

Tremblay Marc Mario. (2012). AS5901 standard revision C. Dans : SAE G-12 ADF Subcommittee Meeting , October 2012, Montréal, Québec.

Tremblay Marc Mario. (2012). AS5901 standard status of next revision C. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2012, Prague, République tchèque.

Tremblay Marc Mario. (2007). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2007, Montréal, Québec.

Tremblay Marc Mario. (2008). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2008, Montréal, Québec.

Tremblay Marc Mario. (2007). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2007, Montreal, Québec.

Tremblay Marc Mario. (2008). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2008, Warsaw, Poland.

Tremblay Marc Mario. (2013). AS5901 standard update potential changes. Dans : SAE G-12 Fluids Subcommittee Meeting , October 2013, Montréal, Québec.

Tremblay Marc Mario. (2014). Ballot summary of AS5901C standard. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2014, Madrid, Spain.

Tremblay Marc Mario. (2015). Brief update of aerospace standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2015, Vancouver, BC.

Tremblay Marc Mario. (2017). Brief update of the aerospace document AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2017, Athens, Greece.

Tremblay Marc Mario. (2008). Testing of runway deicing fluids. Dans : SAE G-12 Fluids Subcommittee Meeting , May 14, 2008, Warsaw, Poland.

Tremblay Marc Mario. (2014). Update of AS5901C standard and publication. Dans : SAE G-12 Fluids Subcommittee Meeting , October 2014, Montréal, Québec.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2017). AIR performance test methods status of revision A, update of RDPWG works & the way forward. Dans : SAE G-12 RDF Subcommittee Meeting , May 2017, Athens, Greece.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2016). Update of 2016 ballots AIR performance test methods. Dans : SAE G-12 RDF Subcommittee Meeting , November 2016, Montréal, Québec.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2015). Update of AIR performance test methods for AMS1431/AMS1435 runways and taxiways de/anti-icing chemicals. Dans : SAE G-12 RDF Subcommittee Meeting , November 2015, Montréal, Québec.

Tremblay Nicolas, Kamali Kaveh, Cardou Philippe, Desrosiers Christian, Gouttefarde Marc et Otis Martin J.-D.. (2019). Eye-on-hand calibration method for cable-driven parallel robots. Dans Cable-driven parallel robots : proceedings of the 4th International Conference on Cable-Driven Parallel Robots. (p. 345-356). Cham, Switzerland : Springer.

Tremblay Simon-Olivier, Marceau Daniel, Coulombe Patrick, Côté Julie et Kocaefe Duygu. (2018). Numerical investigation of the thermomechanical behaviour of anode butt. Light Metals, 2018, p. 1403-1412.

Tremblay Simon-Olivier, Marceau Daniel, Kocaefe Duygu et Lagacé Charles-Luc. (2015). Development of a new approach to increase the electrical performance of anodic assemblies. Light Metals, p. 1175-1180.

Vaidis Maxime. (2017). Conception, réalisation et étude d'un esssaim de robots autonome protégeant un groupe de personnes munies de semelle intelligente. Essai, Université du Québec à Chicoutimi.

Vaidis Maxime et Otis Martin J.-D.. (2020). Human-rover interactions and swarm algorithms of mobile robots in an open and crowded environment: a survey. Preprints, p. 2020090128.

Vaidis Maxime et Otis Martin J.-D.. (2021). Swarm Robotic interactions in an open and cluttered environment: a survey. Designs, 5, (2), p. 37.

Vandewynckel Julien, Otis Martin J.-D., Bouchard Bruno et Ménélas Bob-Antoine-Jerry. Training adapted to Alzheimer patients for reducing daily activities errors and cognitive decline. Dans : 4th International Conference on Serious Games Development and Applications SGDA 2013 , 25-27 Sep, 2013, Trondheim, Norway.

Vandewynckel Julien, Otis Martin J.-D., Bouchard Bruno, Ménélas Bob-Antoine-Jerry et Bouzouane Abdenour. (2013). Towards a real-time error detection within a smart home by using activity recognition with a shoe-mounted accelerometer. Procedia Computer Science, 19, p. 516-523.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Application of superhydrophobic coatings as a corrosion barrier : a review. Surface and Coatings Technology, 341, p. 40-56.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Développement de surfaces superhydrophobes utilisant un jet de plasma à pression atmosphérique. Dans : 86e Congrès de l'ACFAS , 7-11 May 2018, Saguenay, Québec.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2019). Evaluation of atmospheric-pressure plasma parameters to achieve superhydrophobic and self-cleaning HTV silicone rubber surfaces via a single-step, eco-friendly approach. Surface and Coatings Technology, 375, p. 100-111.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Simple fabrication of superhydrophobic surfaces using atmospheric-pressure plasma. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, ). Switzerland : Materials Science Forum.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Wetting and self-cleaning properties of silicone rubber surfaces by atmospheric plasma jet. Dans : 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 21-24 Oct. 2018, Cancun, Mexico.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Wetting and Self-Cleaning Properties of Silicone Rubber Surfaces Treated by Atmospheric Plasma Jet. Dans 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). (p. 239-242). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Vazirinasab Elham, Jafari Reza, Momen Gelareh et Carreira Tony. (2018). Simple fabrication of superhydrophobic surfaces using atmospheric-pressure plasma.

Villemure Félix-Antoine, Fiset Mathieu, Bastien Josée, Mitchell Denis et Fournier Benoît. (2015). Effet de la réaction alcalis-silice (RAS) sur l'adhérence des ancrages époxydiques de barres d'armature. Dans : 16e édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)2B , 9 au 10 juillet 2015, EPFL, Lausanne, Suisse.

Villemure Félix-Antoine, Fiset Mathieu, Bastien Josée, Mitchell Denis, Fournier Benoît et Bissonnette Benoît. (2016). Study of bond between epoxy, steel reinforcing bars and concrete affected by alkali-silica reaction. Dans : 15th International Conference on Alkali-Aggregate Reaction , July 03th - 07th, 2016, São Paulo, Brazil.

Villeneuve Éric. (2014). AS5900 Standard Update. Dans : SAE G-12 AWG Subcommittee Meeting , October 2014, Montréal, Québec.

Villeneuve Éric. (2014). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2014, Madrid, Spain.

Villeneuve Éric. (2015). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2015, Montréal, Québec.

Villeneuve Éric. (2016). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2016, Montréal, Québec.

Villeneuve Éric. (2016). AS5900 Standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2016, Savannah, GA.

Villeneuve Éric. (2017). AS5900 Standard Update. Dans : SAE G12 Fluids Subcommittee Meeting , 2017, Montréal, Québec.

Villeneuve Éric. (2017). AS5900 Standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2017, Athens, Greece.

Villeneuve Éric. (2013). AS5900 standard update potential changes. Dans : SAE G-12 Fluids Subcommittee Meeting , 2013, Montréal, Québec.

Villeneuve Éric. (2013). Brief update of AS5900. Dans : SAE G-12 ADF Subcommittee Meeting , May 2013, New Orleans, Louisiana.

Villeneuve Éric. (2012). Short update of AS5900. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2012, Prague, République Tchèque.

Villeneuve Éric, Blackburn Caroline et Volat Christophe. (2021). Design and development of an experimental setup of electrically powered spinning rotor blades in icing wind tunnel and preliminary testing with surface coatings as hybrid protection solution. Aerospace, 8, (4), p. 98-117.

Villeneuve Éric, Brassard Jean-Denis et Volat Christophe. (2019). Effect of various surface coatings on de-icing/anti-icing fluids aerodynamic and endurance time performances. Aerospace, 6, (10), e114.

Villeneuve Éric, Harvey Derek, Aubert Roger J., Perron Jean et Zimcik David. Piezoelectric de-icing system for rotorcraft. Dans : 70th American Helicopter Society International annual forum 2014 , 20-22 May 2014, Montreal, Quebec.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 1/3 : development of a flat plate numerical model with experimental validation. Aerospace, 7, (5), p. 62-88.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 2/3 : investigation of transient vibration during frequency sweeps and pptimal piezoelectric actuator excitation. Aerospace, 7, (5), p. 49-69.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 3/3 : numerical model and experimental validation of vibration-based de-icing of a flat plate structure. Aerospace, 7, (5), p. 54.

Vinogradova Natalia V., Popova Tatyana N., Chehri Abdellah et Burenina Valentina I.. (2020). SMART technologies as the innovative way of development and the answer to challenges of modern time. ITM Web of Conferences, 35, 06010.

Volat Christophe. (2013). Comparison between the use of surface and volume conductivity to compute potential distribution along an insulator in presence of a thin conductive layer. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642131), p. 409-413.

Volat Christophe, Duvillaret Lionel et Gaborit Gwenaël. (2012). Detection of AC corona discharges using an electro-optic E-field sensor. 2012 IEEE International Symposium on Electrical Insulation, 2012, (12907621), p. 95-98.

Volat Christophe, Duvillaret Lionel, Lecoche Frédéric, Dahdah Jean et Gaborit Gwenaël. (2013). Contactless optical sensors for in situ AC and DC electric field measurement and diagnostics. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642124), p. 365-369.

Volat Christophe, Emran Sayyed Mahdi Ale et Farzaneh Masoud. (2012). Numerical simulations of ice-covered EHV post station insulator performance equipped with booster sheds. 2012 IEEE International Symposium on Electrical Insulation, 2012, (12907620), p. 91-94.

Volat Christophe, Ezzaidi Hassan et Fofana Issouf. (2013). Comparison between 2D and 3D modeling of an EHV post station insulator equipped with a grading ring. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642092), p. 114-118.

Volat Christophe, Farzaneh F. et Akkal Hatim. (2009). Influence of a grading ring on AC flashover voltage of an EHV post insulator covered with ice. 2009 IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2009, (11059859), p. 250-253.

Volat Christophe et Farzaneh Masoud. (2003). Method of sizing the sheds of post insulators in view of improving their electrical performance under cold atmospheric conditions = Méthode de dimensionnement des jupes des isolateurs de poste en vue d'améliorer leur performance électrique sous des conditions atmosphériques froides. CCECE 2003 - Canadian Conference on Electrical and Computer Engineering. Toward a Caring and Humane Technology, 2003, p. 647-650.

Volat Christophe et Farzaneh Masoud. (2006). Potential and electric-field distributions around an ice-covered post-type insulator. Canadian Journal of Electrical and Computer Engineering, 31, (4), p. 221-229.

Volat Christophe et Farzaneh Masoud. (2008). A simple axisymmetric model for calculation of potential distribution along ice-covered post station insulators during a melting period. 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2008, (10459406), p. 232-235.

Volat Christophe et Farzaneh Masoud. (2005). Three-dimensional modeling of potential and electric-field distributions along an EHV ceramic post insulator covered with ice — part I : simulations of a melting period. IEEE Transactions on Power Delivery, 20, (3), p. 2006-2013.

Volat Christophe et Farzaneh Masoud. (2005). Three-dimensional modeling of potential and electric-field distributions along an EHV ceramic post insulator covered with ice — part II : effect of air gaps and partial arcs. IEEE Transactions on Power Delivery, 20, (3), p. 2014-2021.

Volat Christophe, Farzaneh Masoud et Mhaguen Nisrine. (2009). Calculation of critical flashover voltage of ice-covered insulators using the finite element method. 2009 IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2009, (11059860), p. 450-453.

Volat Christophe, Farzaneh Masoud et Mhaguen Nisrine. (2011). Improved FEM models of one- and two-arcs to predict AC critical flashover voltage of ice-covered insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 18, (2), p. 393-400.

Volat Christophe, Jabbari Marouane, Farzaneh Masoud et Duvillaret Lionel. (2013). New method for in live-line detection of small defects in composite insulator based on electro-optic E-field sensor. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (1), p. 194-201.

Volat Christophe, Meghnefi Fethi et Farzaneh Masoud. (2006). Analysis of leakage current of an ice-covered insulator during ice accretion. 2005/2006 IEEE/PES Transmission and Distribution Conference and Exhibition, 2006, p. 121-126.

Volat Christophe, Meghnefi Fethi et Farzaneh Masoud. (2010). A simple method to assess ice built-up severity in EHV substations. Dans 2010 International Conference on High Voltage Engineering and Application. (2010, p. 282-285). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Volat Christophe, Meghnefi Fethi, Farzaneh Masoud et Ezzaidi Hassan. (2010). Monitoring leakage current of ice-covered station post insulators using artificial neural networks. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (2), p. 443-450.

Walter Julien, Chesnaux Romain, Cloutier Vincent et Gaboury Damien. (2017). The influence of water/rock − water/clay interactions and mixing in the salinization processes of groundwater. Journal of Hydrology. Regional Studies, 13, p. 168-188.

Westermaier Martin, Williamson Kelvin et Tremblay Marc Mario. (2013). Performance test methods for AMS1431/1435 runway de/anti-icing chemicals. Dans : SAE G-12 RDF Subcommittee Meeting , October 2013, Montréal, Québec.

Williams B. W., Worswick M. J., D'Amours Guillaume, Rahem Ahmed et Mayer R.. (2010). Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes. International Journal of Impact Engineering, 37, (10), p. 1008-1020.

Wong David, Welch Barry, Nunez Pernelle, Dion Lukas et Spirin Alexey. (2019). Latest progress in IPCC methodology for estimating the extend of PFC greenhouse gases co-evolved in the aluminium reduction cells and challenges in reducing these emissions. Dans : 37th International Conference and Exhibition of ICSOBA , 16 to 20 September 2019, Krasnoyarsk, Russia.

Wu Wei, Anisetti Marco, Chehri Abdellah et Jeon Gwanggil. (2015). Image enlargement using multiple sensors. Journal of Sensors, 2016, e1498796.

Xie Yadian, Kocaefe Duygu, Chen Chunying et Kocaefe Yasar S.. (2016). Review of research on template methods in preparation of nanomaterials. Journal of Nanomaterials, p. 1-10.

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S., Cheng Johnathan et Liu Wei. (2016). The effect of novel synthetic methods and parameters control on morphology of nano-alumina particles. Nanoscale Research Letters, 11, (259),

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S. et Wei Liu. (2013). Correlation between anode recipe and anode properties. International Journal of Engineering and Innovative Technology, 2, (8), p. 23-27.

Xie Yadian, Kocaefe Duygu et Liu Wei. Novel method for extracting ultra high purity alumina from wastewater. .

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Superhydrophobic honeycomb-like cobalt stearate thin films on aluminum with excellent anti-corrosion properties. Applied surface science, 407, p. 361-370.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Ultraviolet-durable superhydrophobic nanocomposite thin films based on cobalt stearate-coated TiO2 nanoparticles combined with polymethylhydrosiloxane. ACS Omega, 2, (11), p. 8198-8204.

Xu Na, Sarkar Dilip K., Chen X-Grant et Tong Weiping. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, p. 173-184.

Xu Na, Sarkar Dilip K., Grant Chen X., Zhang Hui et Tong Weiping. (2016). Superhydrophobic copper stearate/copper oxide thin films by a simple one-step electrochemical process and their corrosion resistance properties. RSC Advances, 6, (42), p. 35466-35478.

Xu Wei, Rajan Karthikeyan, Chen X-Grant et Sarkar Dilip K.. (2019). Facile electrodeposition of superhydrophobic aluminum stearate thin films on copper substrates for active corrosion protection. Surface & Coatings Technology,

Yin Guofan, Otis Martin J.-D., Fortin Pascal E. et Cooperstock Jeremy R.. (2019). Evaluating multimodal feedback for assembly tasks in a virtual environment. Proceedings of the ACM on Human-Computer Interaction, 3, (EICS), e21.

Youssef Khaled et Otis Martin J.-D.. (2020). Reconfigurable fully constrained cable driven parallel mechanism for avoiding interference between cables. Mechanism and Machine Theory, 148, (103781), p. 1-22.

Yudovskaya Marina A., Kinnaird Judith A., Grobler Danie F., Costin Gelu, Abramova Vera D., Dunnett Tim et Barnes Sarah-Jane. (2017). Zonation of Merensky-Style platinum-group element mineralization in Turfspruit Thick Reef Facies (Northern Limb of the Bushveld Complex). Economic Geology, 112, (6), p. 1333-1365.

Zoungrana Wend-Benedo, Chehri Abdellah et Zimmermann Alfred. (2020). Automatic classification of rotating machinery defects using Machine Learning (ML) algorithms. Dans Human centred intelligent systems. (p. 193-203). Smart Innovation, Systems and Technologies. Singapore : Springer.

Cette liste a été générée le Sun Oct 17 23:01:43 2021 EDT.

Creative Commons LicenseSauf indication contraire, les documents archivés dans Constellation sont rendus disponibles selon les termes de la licence Creative Commons "Paternité, pas d'utilisation commerciale, pas de modification" 2.5 Canada.

Bibliothèque Paul-Émile-Boulet, UQAC
555, boulevard de l'Université
Chicoutimi (Québec)  CANADA G7H 2B1
418 545-5011, poste 5630