Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Bilodeau Ève. (2023). Développement de modèles numériques pour l’évaluation du comportement dynamique des ponts à platelage d’aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tinguery Kenza Marianne Sipereh. (2023). Fatigue des joints soudés par friction-malaxage dans les tabliers de ponts en aluminium d’alliage AA6061-T6. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lago Araújo Seixas João Augusto. (2021). Développement d’un béton électriquement conducteur par utilisation des résidus de bauxite bruts ou transformés. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Fleury Anthony. (2020). Conception en fatigue de joints soudés par friction malaxage dans les tabliers de pont en aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Fleury A., Ranjan R., Shah L., St-Georges Lyne, Rahem Ahmed et Walbridge S.. (2019). Fatigue design of friction stir welded joints in aluminium bridge decks. Dans : CSCE Annual Conference , June 12 - 15, 2019, Laval, Québec.

Fleury Anthony, St-Georges Lyne et Rahem Ahmed. (2018). Effect of welding equipment rigidity on mechanical and physical properties of friction stir welded aluminum 6061-T6. Dans : 12th International Symposium on Friction Stir Welding , 26-28 June 2018, Saguenay, Québec.

Rebaïne Fatma, Bouazara Mohamed, Rahem Ahmed et St-Georges Lyne. (2018). Static and vibration analysis of an aluminium and steel bus frame. World Journal of Mechanics, 8, (4), p. 112-135.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2015). Global optimisation of the production of complex aluminium tubes by the hydroforming process. CIRP Journal of Manufacturing Science and Technology, 9, p. 1-11.

Dion-Martin Olivier, Fafard Mario, Rahem Ahmed et D'Amours Guillaume. (2013). Characterization of AA5754 alloy for identification of Barlat's YLD2000‐2d yield criterion. Dans Jiann‐Yang Hwang, Chengguang Bai, John Carpenter, Shadia J. Ikhmayies, Bowen Li, Sergio Neves Monteiro, Zhiwei Peng et Mingming Zhang (dir.), Characterization of Minerals, Metals, and Materials 2013. (p. 53-65). Hoboken, N.J : Wiley.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Guillot Michel, Rahem Ahmed et Fafard Mario. (2013). Numerical and experimental studies on the new design concept of hydroforming dies for complex tubes. Materials and Design, 47, p. 766-778.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2012). Application of a new procedure for the optimization of variable thickness drawing of aluminium tubes. CIRP Journal of Manufacturing Science and Technology, 5, (2), p. 142-150.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2012). Mechanical properties of aluminium-copper B206 alloys with iron and silicon additions. International Journal of Cast Metals Research, 25, (1), p. 15-25.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Perspectives for the application of variable thickness aluminium tubes in hydroforming of complex tubes. Materials Science Forum, 690, p. 447-450.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for determination of formability limit in the tube drawing process. Dans : TMS2011 Annual Meeting & Exhibition : Supplemental Proceedings : Volume 3 : General Paper Selections , 27 February - March 3, 2011, San Diego, California.

Béland J.F, Fafard Mario, Rahem Ahmed, D'Amours Guillaume et Côté T.. (2011). Optimization on the cold drawing process of 6063 aluminium tubes. Applied Mathematical Modelling, 35, (11), p. 5302-5313.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for production of variable thickness aluminium tubes : numerical and experimental studies. Journal of Materials Processing Technology, 211, (4), p. 578-589.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Investigation of the formability limit of aluminium tubes drawn with variable wall thickness. Journal of Materials Processing Technology, 211, (3), p. 402-414.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, Rahem Ahmed et Fafard Mario. (2011). Effect of cross section reduction on the mechanical properties of aluminium tubes drawn with variable wall thickness. Journal of Manufacturing Science and Engineering, 133, (6), p. 1-10.

Moravej Maryam, Amira Sofiene, Prima Frédéric, Rahem Ahmed, Fiset Michel et Mantovani Diego. (2011). Effect of electrodeposition current density on the microstructure and the degradation of electroformed iron for degradable stents. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 176, (20), p. 1812-1822.

Girard Sébastien, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Experimental exploration of the aluminum tube drawing process for producing variable wall thickness components used in light structural applications. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Rahem Ahmed, Guillot Michel et Fafard Mario. (2010). Optimization on the production of variable thickness aluminium tubes. Dans : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, MSEC2010 , October 12-15, 2010, Erie, Pennsylvania.

Bihamta Reza, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Numerical studies on the production of variable thickness aluminium tubes for transportation purposes. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Kamguo Kamga Honoré. (2010). Influence of alloying elements iron and silicon on mechanical properties of aluminum-copper type B206 alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Hot tearing of aluminum-copper B206 alloys with iron and silicon additions. Materials Science and Engineering A : Structural Materials: Properties, Microstructure and Processing, 527, (27-28), p. 7413-7423.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Solidification of aluminum-copper B206 alloys with iron and silicon additions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, (11), p. 2844-2855.

Williams B. W., Worswick M. J., D'Amours Guillaume, Rahem Ahmed et Mayer Robert. (2010). Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes. International Journal of Impact Engineering, 37, (10), p. 1008-1020.

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Effects of mesh size and remapping on the predicted crash response of hydroformed tubes. Dans : The 6th European LS-DYNA Users' Conference , May 2007, Gothenburg, Sweden.

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Crashworthiness of aluminium tubes ; Part 2: improvement of hydroforming operation to increase absorption energy. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

D'Amours Guillaume, Rahem Ahmed, Williams Bruce, Worswick Michael et Mayer Robert. (2007). Crashworthiness of aluminium tubes ; Part 1 : Hydroforming at different corner-fill radii and end feeding levels. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

Shakeri H. R., Rahem Ahmed, Worswick M. J. et Mayer Robert. (2006). Failure mechanism and damage characterization in axially crushed AlMg3.5Mn aluminium tubes. Dans : The 45th International Conference of Metallurgists (COM 2006) , October 1-4, 2006, Montréal, Québec.

Rahem Ahmed. (2001). Analyse non linéaire en grandes rotations et grands déplacements des structures minces métalliques. Thèse de doctorat, Université Laval.