Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Agbe, Henry. (2021). Antibacterial Aluminum Surfaces. Thèse de doctorat, Université du Québec à Chicoutimi.

Agbe, Henry, Sarkar, Dilip K. et Chen, X-Grant. (2022). Anodized aluminum surface with topography-mediated antibacterial properties. ACS Biomaterials Science & Engineering, 8, (3), p. 1087-1095.

Agbe, Henry, Sarkar, Dilip K. et Chen, X-Grant. (2021). Electrochemically synthesized silver phosphate coating on anodized aluminum with superior antibacterial properties. Surface and Coatings Technology, 428, e127892.

Agbe, Henry, Sarkar, Dilip K. et Chen, X-Grant. (2020). Tunable Superhydrophobic Aluminum Surfaces with Anti-Biofouling and Antibacterial Properties. Coatings, 10, (10), p. 982.

Agbe, Henry, Sarkar, Dilip K., Chen, X-Grant et Dodoo-Arhin, David. (2022). Silver–polymethylhydrosiloxane–quaternary ammonium coating on anodized aluminum with excellent antibacterial property. ACS Applied Bio Materials, 5, (10), p. 4760-4769.

Agbe, Henry, Sarkar, Dilip K., Chen, X-Grant, Faucheux, Nathalie, Soucy, Gervais et Bernier, Jean-Luc. (2020). Silver–polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Agbe, Henry, Sarkar, Dilip K., Chen, X-Grant, Faucheux, Nathalie, Soucy, Gervais et Bernier, Jean-Luc. (2020). Silver−polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Ahmed, Mohamed. (2024). Developing novel high strength 4xxx filler alloys for aluminum fusion welding of AA6xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Ahmed, Mohamed, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2023). Welding of AA6061-T6 Sheets Using High-Strength 4xxx Fillers: Effect of Mg on Mechanical and Fatigue Properties. Materials, 16, (10), e3832.

Ahmed, Mohamed, Javidani, Mousa, Mirakhorli, Fatemeh, Maltais, Alexandre et Chen, X-Grant. (2022). Developing High-Strength Al-Si-Mg Filler Metals for Aluminum Fusion Welding. Journal of Materials Engineering and Performance,

Algendy, Ahmed. (2022). Precipitation behaviors of Mn-bearing dispersoids and Al3(Sc,Zr) precipitates and their impacts on the microstructure and mechanical properties of rolled Al-Mg-Mn 5xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Algendy, Ahmed Y., Liu, Kun et Chen, X-Grant. (2021). Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy. Materials Characterization, 181, e111487.

Algendy, Ahmed Y., Liu, Kun et Chen, X-Grant. (2020). Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels. MATEC Web of Conferences, 326, e02002.

Algendy, Ahmed Y., Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2022). Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys. Materials Science and Engineering: A, 855, e143950.

Algendy, Ahmed Y., Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2022). Evolution of discontinuous/continuous Al3(Sc,Zr) precipitation in Al-Mg-Mn 5083 alloy during thermomechanical process and its impact on tensile properties. Materials Characterization, 192, e112241.

Arici, Anil. (2019). Development of Al-Si-Mg alloys for permanent mold casting and high-pressure vacuum die casting applications. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Attia, Mohamed. (2019). Study of design and thermal treatment of automotive control arm fabricated from A357 semi-solid alloy. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Attia, Mohamed, Ragab, Khaled Ahmed, Bouazara, Mohamed et Chen, X-Grant. (2020). Fatigue cycles and performance evaluation of accelerating aging heat treated aluminum semi solid materials designed for automotive dynamic components. Applied Sciences, 10, (9), p. 1-15.

Bolouri, Amir et Chen, X-Grant. (2018). Transient rheological behavior of semisolid SEED-processed 7075 aluminum alloys in rapid compression. Metallurgical and Materials Transactions B, 49, (5), p. 2858-2867.

Bolouri, Amir, Liu, Kun et Chen, X-Grant. (2016). Effects of iron-rich intermetallics and grain structure on semisolid tensile properties of Al-Cu 206 cast alloys near solidus temperature. Metallurgical and Materials Transactions A,

Chen, Sinan. (2018). Effet de l’addition de molybdène et des conditions de traitement thermique sur l’évolution des dispersoïdes et les propriétés de température élevée de l’alliage de fonderie A356. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen, Sinan, Liu, Kun et Chen, X-Grant. (2019). Elevated-temperature low-cycle fatigue behaviors of Al-Si 356 and 319 foundry alloys. Dans : TMS-Light Metals 2019 , March 10-14, San Antonio, Texas.

Chen, Sinan, Liu, Kun et Chen, X-Grant. (2019). Precipitation behavior of dispersoids and elevated-temperature properties in Al–Si–Mg foundry alloy with Mo addition. Journal of Materials Research, 34, (18), p. 3071-3081.

Chen, Zhixing. (2019). L'identification de la calorimétrie à balayage différentiel (DSC) des conditions de traitement thermique des alliages d'aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen, Zhixing, Elgallad, Emad M., Liu, Kun et Chen, X-Grant. (2022). Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions. Metallography, Microstructure, and Analysis,

Chen, Zhixing, Liu, Kun, Elgallad, Emad M., Breton, Francis et Chen, X-Grant. (2020). Differential scanning calorimetry fingerprints of various heat-treatment tempers of different aluminum alloys. Metals, 10, (6), e763.

Cui, Liying. (2024). Lightweight Al-based entropy alloys for elevated-temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Cui, Liying, Zhang, Zhan et Chen, X-Grant. (2023). Development of lightweight Al-based entropy alloys for elevated temperature applications. Journal of Alloys and Compounds, 938, e168619.

Cui, Liying, Zhang, Zhan et Chen, X-Grant. (2023). Microstructure and mechanical properties of novel Al–Cu–Mg–Zn lightweight entropy alloys for elevated-temperature applications. Materials Characterization, 200, e112927.

Elasheri, Ali, Elgallad, Emad M., Parson, Nick et Chen, X-Grant. (2022). Effect of Si Level on the Evolution of Zr‐Bearing Dispersoids and the Related Hot Deformation and Recrystallization Behaviors in Al–Si–Mg 6xxx Alloys. Advanced Engineering Materials, e2101606.

Elasheri, Ali, Elgallad, Emad M., Parson, Nick et Chen, X-Grant. (2022). Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization. Philosophical Magazine, p. 1-17.

Elasheri, Ali, Elgallad, Emad M., Parson, Nick et Chen, X-Grant. (2022). Nucleation and transformation of Zr-bearing dispersoids in Al–Mg–Si 6xxx alloys. Journal of Materials Research,

Elashery, Ali. (2022). Effect of Zr-bearing dispersoids evolution on hot deformation and recrystallization of 6xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Elashri, A., Elgallad, E. M., Parson, Nick et Chen, X-Grant. (2021). Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy. Journal of Materials Engineering and Performance, 30, p. 7851-7862.

Elgallad, E. M., Liu, Kun, Zhang, Zhan et Chen, X-Grant. (2020). Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy. Philosophical Magazine, 101, (1), p. 96-116.

Elgallad, Emad Eldin, Zhang, Zhan et Chen, X-Grant. (2017). Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy. Physica B: Condensed Matter, 514, p. 70-77.

Elgallad, Emad M., Chen, Zhixing et Chen, X-Grant. (2023). On the Room- and Elevated-Temperature Tensile Properties of Hot-Rolled 6082 Alloys Containing Thermally Stable Dispersoids. Journal of Materials Engineering and Performance,

Farzaneh, Masoud, Fofana, Issouf, Tavakoli, C. et Chen, X-Grant. (2003). Dynamic modeling of DC arc discharge on ice surfaces. IEEE Transactions on Dielectrics and Electrical Insulation, 10, (3), p. 463-474.

Gauthier, Pascal. (2010). Corrosion behaviour study of the forged AA6082 aluminum alloy from different feedstock. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Guo, Jun Feng. (2012). Joining of Al-B4C metal matrix composites by laser welding and friction stir welding. Thèse de doctorat, Université du Québec à Chicoutimi.

Guo, Zhanying, Zhao, Gang et Chen, X-Grant. (2016). Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing. Materials Characterization, 114, p. 79-87.

Guo, Zhanying, Zhao, Gang et Chen, X-Grant. (2015). Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy. Materials Characterization, 102, p. 122-130.

Hajji, Chaima. (2023). Effect of grain refiners on the refining performance in aluminum wrought AA6111 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Han, Yumei. (2012). Corrosion des composites à matrice metallique du type Al-B4C dans les solutions aqueuses. Thèse de doctorat, Université du Québec à Chicoutimi.

Han, Yu-Mei et Chen, X-Grant. (2015). Electrochemical behavior of Al-B₄C metal matrix composites in NaCl solution. Materials, 8, (9), p. 6455-6470.

Heidarzadeh, Akbar, Javidani, Mousa, Mofarrehi, Mohammadreza, Farzaneh, Amir et Chen, X-Grant. (2021). Submerged dissimilar friction stir welding of AA6061 and AA7075 aluminum alloys: microstructure characterization and mechanical property. Metals, 11, (10), e1592.

Heidarzadeh, Akbar, Javidani, Mousa, Mofarrehi, Mohammadreza, Motalleb-nejad, Pouyan, Mohammadzadeh, Roghayeh, Jafarian, Hamidreza et Chen, X-Grant. (2023). Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials, 16, (3), e944.

Heidarzadeh, Akbar, Khorshidi, Mahsa, Mohammadzadeh, Roghayeh, Khajeh, Rasoul, Mofarrehi, Mohammadreza, Javidani, Mousa et Chen, X-Grant. (2023). Multipass friction stir processing of laser-powder bed fusion AlSi10Mg: microstructure and mechanical properties. Materials, 16, e1559.

Heugue, Pierre, Larouche, Daniel, Breton, Francis, Martinez, Rémi et Chen, X-Grant. (2019). Evaluation of the growth kinetics of θ′ and θ-Al2Cu precipitates in a binary Al-3.5 Wt Pct Cu alloy. Metallurgical and Materials Transactions A, 50, (7), p. 3048-3060.

Heugue, Pierre, Larouche, Daniel, Breton, Francis, Martinez, Rémi, Chen, X-Grant et Massinon, Denis. (2022). Modelling of strain-controlled thermomechanical fatigue testing of cast AlSi7Cu3.5Mg0.15 (Mn, Zr, V) alloy for different aging conditions. Metals, 12, e1258.

Heugue, Pierre, Larouche, Daniel, Breton, Francis, Massinon, Denis, Martinez, Rémi et Chen, X-Grant. (2019). Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu3.5Mg0.15 cast alloy with Zr and V additions. Metals, 9, (7), e777.

Hu, Peng. (2023). Elevated-temperature mechanical, creep and fatigue behavior of aluminum-copper cast aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Hu, Peng, Liu, Kun, Pan, Lei et Chen, X-Grant. (2022). Effect of Mg microalloying on elevated-temperature creep resistance of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 851, e143649.

Hu, Peng, Liu, Kun, Pan, Lei et Chen, X-Grant. (2023). Effects of individual and combined additions of transition elements (Zr, Ti and V) on the microstructure stability and elevated-temperature properties of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 867, e144718.

Huang, Ying. (2012). Protection of metal and alloy surfaces using corrosion resistance nanostructured superhydrophobic coatings. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Huang, Ying, Sarkar, Dilip K. et Chen, X-Grant. (2016). Fabrication of corrosion resistance micro-nanostructured superhydrophobic anodized aluminum in a one-step electrodeposition process. Metals, 6, (3), p. 47.

Huang, Ying, Sarkar, Dilip K. et Chen, X-Grant. (2011). Fabrication of Superhydrophobic Surfaces on Aluminum Alloy Via Electrodeposition of Copper Followed by Electrochemical Modification. Nano-Micro Letters, 3, (3), p. 160-165.

Huang, Ying, Sarkar, Dilip K. et Chen, X-Grant. (2010). A one-step process to engineer superhydrophobic copper surfaces. Materials Letters, 64, (24), p. 2722-2724.

Huang, Ying, Sarkar, Dilip K. et Chen, X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied Surface Science, 356, p. 1012-1024.

Huang, Ying, Sarkar, Dilip K. et Chen, X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied surface science, 356, p. 1012-1024.

Huang, Ying, Sarkar, Dilip K. et Chen, X-Grant. (2015). Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process. Applied Surface Science, 237, p. 327-334.

Huang, Ying, Sarkar, Dilip K., Gallant, Danick et Chen, X-Grant. (2013). Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process. Applied Surface Science, 282, p. 689-694.

Jann, Jessica, Drevelle, Olivier, Chen, X-Grant, Auclair-Gilbert, Myriam, Soucy, Gervais, Faucheux, Nathalie et Fortier, Louis-Charles. (2021). Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria. RSC Advances, 11, (60), p. 38172-38188.

Javidani, Mousa, Larouche, Daniel et Chen, X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Javidani, Mousa, Larouche, Daniel et Chen, X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Javidani, Mousa, Larouche, Daniel et Chen, X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Jin, L., Liu, Kun et Chen, X-Grant. (2020). Improved elevated temperature properties in Al-13%Si piston alloys by Mo addition. Journal of Materials Engineering and Performance, 29, (1), p. 126-134.

Jin, Lanfeng. (2019). Development of Al–Si cast alloys for elevated-temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Jin, Lanfeng, Liu, Kun et Chen, X-Grant. (2020). Evolution of dispersoids and their effects on elevated-temperature strength and creep resistance in Al-Si-Cu 319 cast alloys with Mn and Mo additions. Materials Science and Engineering: A, 770, p. 138554.

Jin, Lanfeng, Liu, Kun et Chen, X-Grant. (2019). Evolution of Fe-Rich intermetallics in Al-Si-Cu 319 cast alloy with various Fe, Mo, and Mn contents. Metallurgical and Materials Transactions B, 50, (4), p. 1896-1907.

Khangholi, Siamak Nikzad, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2022). Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments. Journal of Alloys and Compounds, 914, e165242.

Khangholi, Siamak Nikzad, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2022). Review on recent progress in Al–Mg–Si 6xxx conductor alloys. Journal of Materials Research, 37, (3), p. 670-691.

Kocaefe, Duygu, Sarkar, Dilip K. et Chen, X-Grant. (2012). Effect of Ti addition on the wettability of Al-B4C metal matrix composites. International Journal of materials research, 103, (6), p. 729-736.

Lai, Jing. (2011). Developing Sc and Zr containing Al-B?C metal matrix composites for high temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Lemieux, Alain. (2012). Effets du Si, Cu et Fe sur les propriétés statiques et dynamiques d'un alliage 206 (Al-Cu) en semi-solide produit par le procédé SEED. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Gaofeng. (2012). Effect of trace elements V and Ni on Fe intermetallic phases formation and distribution in DC cast 5xxx series Al ingots. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Chen. (2018). Precipitation behaviors of dispersoids induced from transition elements (Mn, Sc and Zr) and their effect on recrystallization resistance in AA6082 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Chen, Liu, Kun et Chen, X-Grant. (2020). Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology, 39, p. 135-143.

Li, Cong. (2022). Relationship between thermal conductivity and electrical conductivity in B4C particle reinforced aluminum matrix composites. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Dong. (2020). Effet des éléments de transition sur les comportements de précipitation des dispersoïdes/précipités et les propriétés à haute température des alliages coulés Al-Si et Al-Cu. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li, Dong, Liu, Kun et Chen, X-Grant. (2023). Evolution of Microstructure and Elevated-Temperature Properties during Thermal Exposure with Transition Elements (V, Zr and Mo) in Al–Si 356 Type Cast Alloys. MATERIALS TRANSACTIONS, 64, (2), p. 406-413.

Li, Dong, Liu, Kun et Chen, X-Grant. (2020). Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02003),

Li, Dong, Liu, Kun, Rakhmonov, Jovid et Chen, X-Grant. (2021). Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys. Materials Science and Engineering: A, 827, e142090.

Li, J. S., Raoelison, R. N., Sapanathan, T., Zhang, Zhan, Chen, X-Grant, Marceau, Daniel, Hou, Y. L. et Rachik, M.. (2020). An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. Applied Physics Letters, 116, (161601),

Li, Zhen. (2017). Development of Al-Mn-Mg 3xxx alloys for applications at elevated temperature. Thèse de doctorat, Université du Québec à Chicoutimi.

Li, Zhen, Zhang, Zhan et Chen, X-Grant. (2018). Effect of metastable Mg2Si and dislocations on α-Al(MnFe)Si dispersoid formation in Al-Mn-Mg 3xxx alloys. Metallurgical and Materials Transactions A, 49, (11), p. 5799-5814.

Li, Zhen, Zhang, Zhan et Chen, X-Grant. (2018). Improvement in the mechanical properties and creep resistance of Al-Mn-Mg 3004 alloy with Sc and Zr addition. Materials Science and Engineering: A, 729, p. 196-207.

Li, Zhen, Zhang, Zhan et Chen, X-Grant. (2018). The Influence of Cu addition on dispersoid formation and mechanical properties of Al-Mn-Mg 3004 alloy. Metals, 8, (3), e155.

Li, Zhen, Zhang, Zhan et Chen, X-Grant. (2017). Microstructure, elevated-temperature mechanical properties and creep resistance of dispersoid-strengthened Al-Mn-Mg 3xxx alloys with varying Mg and Si contents. Materials Science and Engineering: A, 708, p. 383-394.

Liu, Kun. (2012). Solidification of iron-rich intermetallic phases and their effects on tensile properties in Al-Cu 206 cast alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Liu, Kun, Cao, X., Bolouri, Amir et Chen, X-Grant. (2019). Effect of Fe-rich intermetallics on tensile behavior of Al-Cu 206 cast alloys at solid and near-solid states. Dans : TMS-2019 Shape Casting: 7th International Symposium celebrating Prof. John Campbell’s 80 th Birthday , March 10-14, San Antonio, Texas.

Liu, Kun et Chen, X-Grant. (2015). Development of Al-Mn-Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening. Materials and Design, 84, p. 340-350.

Liu, Kun et Chen, X-Grant. (2015). Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys. Metallurgical and Materials Transactions B,

Liu, Kun et Chen, X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

Liu, Kun et Chen, X-Grant. (2018). Improvement in elevated-temperature properties of Al–13% Si piston alloys by dispersoid strengthening via Mn addition. Journal of Materials Research, 33, (20), p. 3430-3438.

Liu, Kun et Chen, X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

Liu, Kun et Chen, X-Grant. (2019). Influence of the modification of iron-bearing intermetallic and eutectic Si on the mechanical behavior near the solidus temperature in Al-Si-Cu 319 cast alloy. Physica B: Condensed Matter, 560, p. 126-132.

Liu, Kun, Elgallad, Emad, Li, Chen et Chen, X-Grant. (2021). Effects of Zr and Sc additions on precipitation of α-Al(FeMn)Si dispersoids under various heat treatments in Al–Mg–Si AA6082 alloys. International Journal of Materials Research, 112, (9), p. 706-716.

Liu, Kun, Li, Chen et Chen, X-Grant. (2020). Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (03001),

Liu, Kun, Ma, Hezhaoye et Chen, X-Grant. (2017). Enhanced elevated-temperature properties via Mo addition in Al-Mn-Mg 3004 alloy. Journal of alloys and compounds, 694, p. 354-365.

Liu, Kun, Ma, Hezhaoye et Chen, X-Grant. (2018). Improving the Elevated-Temperature Properties by Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys. Metallurgical and Materials Transactions B, 49, (4), p. 1588-1596.

Liu, Kun, Mirza, Foisal Ahmed et Chen, X-Grant. (2018). Effect of overaging on the cyclic deformation behavior of an AA6061 aluminum alloy. Metals, 8, (7), e528.

Liu, Kun, Nabawy, Ahmed et Chen, X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Liu, Kun, Wang, Shuai, Hu, Peng, Pan, Lei et Chen, X-Grant. (2023). Improved Thermo-Mechanical Fatigue Resistance of Al-Si-Cu 319 Alloys by Microalloying with Mo. Materials, 16, (9), e3515.

Liu, Kun, Wang, Shuai, Pan, Lei et Chen, X-Grant. (2023). Thermo-Mechanical fatigue behavior and resultant microstructure evolution in Al-Si 319 and 356 cast alloys. Materials, 16, (2), p. 829.

Liu, Mengyun. (2018). Quench sensitivity of high pressure vacuum die castings and permanent mold castings of Aural-3/5 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Liu, Mengyun, Zhang, Zhan, Breton, Francis et Chen, X-Grant. (2019). Investigation of the quench sensitivity of an AlSi10Mg alloy in permanent mold and high-pressure vacuum die wastings. Materials, 12, (11), e1876.

Liu, Mengyun, Zhang, Zhan, Breton, Francis et Chen, X-Grant. (2020). Quench sensitivity and phase transformation kinetics of AlSi7MnMg high pressure vacuum die casting. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02001),

Ma, Hezhaoye. (2015). The effects of Mo addition and heat treatment on elevated temperature properties of AA3004 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ma, K., Elgallad, Emad M., Chen, Zhixing, Xiao, B. L. et Chen, X-Grant. (2022). Improving the elevated-temperature mechanical properties of AA3004 hot-rolled sheets by microalloying with Mo and optimizing the process route. Journal of Materials Research and Technology, 19, p. 4489-4503.

Ma, K., Li, X. N., Liu, Kun, Chen, X-Grant, Liu, Z. Y., Xiao, B. L. et Ma, Zheyuan. (2021). Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones. Composites Part B: Engineering, 222, e109094.

Ma, K., Liu, Z. Y., Liu, Kun, Chen, X-Grant, Xiao, B. L. et Ma, Zheyuan. (2021). Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon, 178, p. 190-201.

Mirza, Foisal Ahmed, Macwan, A., Bhole, S.D., Chen, D.L. et Chen, X-Grant. (2016). Effect of welding energy on microstructure and strength of ultrasonic spot welded dissimilar joints of aluminum to steel sheets. Materials Science and Engineering: A, 668, p. 73-85.

Mirza, Foisal Ahmed, Macwan, A., Bhole, S.D., Chen, D.L. et Chen, X-Grant. (2017). Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets. Materials Science and Engineering: A, 690, p. 323-336.

Mofarrehi, Mohammadreza. (2022). Thermomechanical behavior of Al-Mg-Mn alloys: effect of Mn and Na on hot workability. Thèse de doctorat, Université du Québec à Chicoutimi.

Mofarrehi, Mohammadreza, Javidani, Mousa et Chen, X-Grant. (2021). On the intermetallic constituents in the sodium-induced edge cracking of hot-rolled AA5182 aluminum alloys. Philosophical Magazine, 101, (16), p. 1849-1870.

Nikzad Khangholi, Siamak. (2021). Improvement of mechanical strength and electrical conductivity in 6xxx series aluminum conductor alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Nikzad Khangholi, Siamak, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2021). Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys. Materials Science and Engineering: A, 820, p. 141538.

Nikzad Khangholi, Siamak, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2020). Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels. Dans : The 17th International Conference on Aluminium Alloys 2020 (ICAA17) , October 26-29, 2020, Grenoble, France.

Nikzad Khangholi, Siamak, Javidani, Mousa, Maltais, Alexandre et Chen, X-Grant. (2020). Optimization of mechanical properties and electrical conductivity in Al–Mg–Si 6201 alloys with different Mg/Si ratios. Journal of Materials Research, 35, (20), p. 2765-2776.

Pan, Lei. (2016). Effects of alloying elements on the microstructure and properties of 8xxx electrical conductor alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Pan, Lei, Liu, Kun, Breton, Francis et Chen, X-Grant. (2016). Effect of Fe on microstructure and properties of 8xxx aluminum conductor alloys. Journal of Materials Engineering and Performance, 25, (12), p. 5201-5208.

Pan, Lei, Liu, Kun, Breton, Francis et Chen, X-Grant. (2017). Effects of minor Cu and Mg additions on microstructure and material properties of 8xxx aluminum conductor alloys. Journal of Materials Research, 32, (6), p. 1094-1104.

Pan, Lei, Mirza, Foisal Ahmed, Liu, Kun et Chen, X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Pourkhorshid, Esmaeil. (2025). Aluminum alloys for additive manufacturing: towards higher strength alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Qassem, Mohamed. (2023). Evaluation of hot tearing susceptibility of wrought aluminum alloys based on their semisolid tensile properties. Thèse de doctorat, Université du Québec à Chicoutimi.

Qassem, Mohamed, Javidani, Mousa, Larouche, Daniel, Colbert, Josée et Chen, X-Grant. (2022). Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys. Journal of Materials Science,

Qassem, Mohamed, Javidani, Mousa, Larouche, Daniel, Colbert, Josée et Chen, X-Grant. (2023). Temperature dependence of elastic properties of Al-Mg-Si direct-Chill-cast AA6111 alloy at near-solidus temperatures. Journal of Materials Engineering and Performance,

Qian, Xiaoming. (2019). Hot deformation behavior of 6xxx aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Qian, Xiaoming, Parson, Nick et Chen, X-Grant. (2019). Effect of homogenization treatment and microalloying with Mn on the microstructure and hot workability of AA6060 aluminum alloys. Journal of Materials Engineering and Performance, 28, (8), p. 4531-4542.

Qian, Xiaoming, Parson, Nick et Chen, X-Grant. (2020). Effect of post-homogenisation cooling rate and Mn addition on Mg2Si precipitation and hot workability of AA6060 alloys. Canadian Metallurgical Quarterly, 59, (2), p. 189-200.

Qian, Xiaoming, Parson, Nick et Chen, X-Grant. (2019). Effects of Mn addition and related Mn-containing dispersoids on the hot deformation behavior of 6082 aluminum alloys. Materials Science and Engineering: A, 764, p. 138253.

Qian, Xiaoming, Parson, Nick et Chen, X-Grant. (2020). Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing. Journal of Materials Science & Technology, 52, p. 189-197.

Qin, Jian. (2016). Mechanical properties and hot workability of Al-15%B4C metal matrix composites with Sc and Zr for elevated temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Qin, Jian, Zhang, Zhan et Chen, X-Grant. (2019). Evolution of activation energy during hot deformation of Al–15% B4C composites containing Sc and Zr. AIMS Materials Science, 6, (4), p. 484-497.

Qin, Jian, Zhang, Zhan et Chen, X-Grant. (2017). Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr. Journal of Materials Engineering and Performance, 26, (4), p. 1673-1684.

Qin, Jian, Zhang, Zhan et Chen, X-Grant. (2016). Mechanical properties and strengthening mechanisms of Al-15 Pct B4C composites with Sc and Zr at elevated temperatures. Metallurgical and Materials Transactions A, 47, (9), p. 4694-4708.

Qin, Jian, Zhang, Zhan et Chen, X-Grant. (2017). Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature. Journal of composite materials, 51, (18), p. 2643-2653.

Racine, Dany. (2009). Effet du temps et de la température sur l'homogénéisation d'un alliage d'aluminium AA6061 destiné au forgeage à chaud. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ragab, Khaled Ahmed, Bouazara, Mohamed et Chen, X-Grant. (2018). Influence of thermal aging parameters on the characteristics of aluminum semi-solid alloys. Metals, 8, (10), e746.

Ragab, Khaled Ahmed, Bouazara, Mohamed et Chen, X-Grant. (2019). Quality index charts of Al-Si-Mg semi solid alloys subjected to multiple temperatures aging treatments and different quenching media. Materials, 12, (11), e1834.

Rakhmonov, Jovid, Liu, Kun et Chen, X-Grant. (2020). Effects of compositional variation on the thermal stability of θ′-Al2Cu precipitates and elevated-temperature strengths in Al-Cu 206 alloys. Journal of Materials Engineering and Performance, 29, (11), p. 7221-7230.

Rakhmonov, Jovid, Liu, Kun, Pan, Lei, Breton, Francis et Chen, X-Grant. (2020). Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg. Journal of Alloys and Compounds, 827, (154305),

Rakhmonov, Jovid, Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2021). Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content. Journal of Alloys and Compounds, 861, p. 157937.

Rakhmonov, Jovid, Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2021). Enhanced elevated-temperature strength and creep resistance of dispersion-strengthened Al-Mg-Si-Mn AA6082 alloys through modified processing route. Materials, 14, (19), e5489.

Rakhmonov, Jovid, Liu, Kun, Rometsch, Paul, Parson, Nick et Chen, X-Grant. (2020). Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high-temperature exposure through dispersoid strengthening. Materials, 13, (22), p. 5295.

Rakhmonov, Jovid, Qassem, Mohamed, Larouche, Daniel, Liu, Kun, Javidani, Mousa, Colbert, Josée et Chen, X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Saleema, Noormohammed, Sarkar, Dilip K., Gallant, Danick, Paynter, Royston W. et Chen, X-Grant. (2011). Chemical Nature of Superhydrophobic Aluminium Alloy Surfaces Produced via a One-Step Process Using Fluoroalkyl-Silane in a Base Medium. ACS Applied Materials & Interfaces, 3, (12), p. 4775-4781.

Saleema, Noormohammed, Sarkar, Dilip K., Paynter, Royston W. et Chen, X-Grant. (2010). Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Applied Materials & Interfaces, 2, (9), p. 2500-2502.

Sarkar, Arunima. (2009). Investigation on wetting of B4C by aluminum alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Shakiba, Mohammad. (2015). Effect of homogenization and alloying elements on hot deformation behaviour of 1XXX series aluminum alloys = Effet des éléments d'alliage et d'homogénéisation sur le comportement à la déformation à chaud des alliages d'aluminium de la série 1XXX. Thèse de doctorat, Université du Québec à Chicoutimi.

Shakiba, Mohammad, Parson, Nick et Chen, X-Grant. (2016). Modeling the Effects of Cu content and deformation variables on the high-temperature flow behavior of dilute Al-Fe-Si alloys using an artificial neural network. Materials, 9, (7), p. 536.

Shao, Quan. (2025). New generation of high performance aluminum electrical conductors for elevated temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Shen, Peng. (2012). The effects of heat treatment on the microstructure and mechanical properties of the AA2618 DC cast plate. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Shi, Cangji. (2010). Investigation and characterization of fluidity and microstructure of recycled AL-B4C materials. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Shi, Cangji. (2014). Effects of Zr and V on microstructure and hot deformation behavior of 7150 aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Shi, Cangji et Chen, X-Grant. (2016). Evolution of activation energies for hot deformation of 7150 aluminum alloys with various Zr and V additions. Materials Science and Engineering: A, 650, p. 197-209.

Shi, Cangji, Lai, Jing et Chen, X-Grant. (2014). Microstructural evolution and dynamic softening mechanisms of Al-Zn-Mg-Cu alloy during hot compressive deformation. Materials, 7, (1), p. 244-264.

Tebib, Mehand. (2012). Rheological behavior and microstructural evolution of semi-solid hypereutectic Al-Si-Mg-Cu alloys using rheoforming process. Thèse de doctorat, Université du Québec à Chicoutimi.

Tiwari, Mani Mohan. (2024). Studies of surface preparation and structural adhesive bonding of aluminum and other materials. Thèse de doctorat, Université du Québec à Chicoutimi.

Wang, Shuai. (2022). Thermo-mechanical fatigue behaviors of Al-Si 319 and 356 cast alloys and the influence of Mo on their evolution. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Wang, Zimeng. (2023). Evolution of microstructure and mechanical properties during elevated-temperature thermal exposure with Si and transition elements additions in Al-Cu 224 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xiong, Jiawei. (2016). Durable nanostructured superhydrophobic coatings on aluminum alloy substrates. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xiong, Jiawei, Sarkar, Dilip K. et Chen, X-Grant. (2017). Superhydrophobic honeycomb-like cobalt stearate thin films on aluminum with excellent anti-corrosion properties. Applied surface science, 407, p. 361-370.

Xiong, Jiawei, Sarkar, Dilip K. et Chen, X-Grant. (2017). Ultraviolet-durable superhydrophobic nanocomposite thin films based on cobalt stearate-coated TiO2 nanoparticles combined with polymethylhydrosiloxane. ACS Omega, 2, (11), p. 8198-8204.

Xu, Na, Sarkar, Dilip K., Chen, X-Grant et Tong, Weiping. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, p. 173-184.

Xu, Wei. (2018). Synthèse et caractérisation des revêtements superhydrophobes à base d’aluminium pour une protection active contre la corrosion des substrats métalliques. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xu, Wei, Rajan, Karthikeyan, Chen, X-Grant et Sarkar, Dilip K.. (2019). Facile electrodeposition of superhydrophobic aluminum stearate thin films on copper substrates for active corrosion protection. Surface & Coatings Technology,

Zhang, Zhan, Arici, Anil, Breton, Francis et Chen, X-Grant. (2023). Influence of transition elements (Zr, V, and Mo) on microstructure and tensile properties of AlSi8Mg casting alloys. Canadian Metallurgical Quarterly, p. 1-10.

Zhao, Qinfu. (2016). Study on the rheoformability of semisolid 7075 wrought aluminum alloy using SEED process. Mémoire de maîtrise, Université du Québec à Chicoutimi.