Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

A

Abdelaziz Mohamed. (2018). Microstructural and mechanical characterization of transition elements-containing Al-Si-Cu-Mg alloys for elevated-temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Adekunle Andrew Adewunmi, Oparanti Samson Okikiola et Fofana Issouf. (2023). Performance Assessment of Cellulose Paper Impregnated in Nanofluid for Power Transformer Insulation Application: A review. Energies, 16, (4),

Adja Akré Anne Simone, Sobhani Sarah, Momen Gelareh, Fofana Issouf et Carrière Julie. (2023). Step by step progress to achieve an icephobic silicone‐epoxy hybrid coating: Tailoring matrix composition and additives. Journal of Applied Polymer Science, 140, (32), e54262.

Adja Akré Simone Anne. (2023). Développement d’un revêtement glaciophobe permettant de réduire l’adhérence et l’accumulation de la glace sur les structures portuaires en acier. Thèse de doctorat, Université du Québec à Chicoutimi.

Agbe Henry. (2021). Antibacterial Aluminum Surfaces. Thèse de doctorat, Université du Québec à Chicoutimi.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2022). Anodized aluminum surface with topography-mediated antibacterial properties. ACS Biomaterials Science & Engineering, 8, (3), p. 1087-1095.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2021). Electrochemically synthesized silver phosphate coating on anodized aluminum with superior antibacterial properties. Surface and Coatings Technology, 428, e127892.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2020). Tunable Superhydrophobic Aluminum Surfaces with Anti-Biofouling and Antibacterial Properties. Coatings, 10, (10), p. 982.

Agbe Henry, Sarkar Dilip K., Chen X-Grant et Dodoo-Arhin David. (2022). Silver–polymethylhydrosiloxane–quaternary ammonium coating on anodized aluminum with excellent antibacterial property. ACS Applied Bio Materials, 5, (10), p. 4760-4769.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver–polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver−polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Ahmed Mohamed. (2024). Developing novel high strength 4xxx filler alloys for aluminum fusion welding of AA6xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Ahmed Mohamed, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2023). Welding of AA6061-T6 Sheets Using High-Strength 4xxx Fillers: Effect of Mg on Mechanical and Fatigue Properties. Materials, 16, (10), e3832.

Ahmed Mohamed, Javidani Mousa, Mirakhorli Fatemeh, Maltais Alexandre et Chen X-Grant. (2022). Developing High-Strength Al-Si-Mg Filler Metals for Aluminum Fusion Welding. Journal of Materials Engineering and Performance,

Ahoutou Yao. (2017). Détermination du niveau de brai dans une anode crue par analyse d’images. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Alarie Jonathan, Kiss László, Dion Lukas, Truchon Martin, Santerre Renaud, Guérard Sébastien et Bilodeau Jean-François. (2022). Empirical Prediction of Alumina Dissolution Rate in a Cryolitic Melt: Comparison with the Existing Literature. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 349-356). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Alarie Jonathan, Roger Thomas, Kiss László, Poncsák Sándor, Guérard Sébastien et Bilodeau Jean-François. (2020). Validation of the gravimetric method to properly follow alumina dissolution in cryolitic bath. Light Metals, 2020, p. 680-687.

Ale-Emran Sayyed Mahdi. (2013). Design of booster shed parameters for improving the electrical performance of post insulators under icing conditions. Thèse de doctorat, Université du Québec à Chicoutimi.

Algendy Ahmed. (2022). Precipitation behaviors of Mn-bearing dispersoids and Al3(Sc,Zr) precipitates and their impacts on the microstructure and mechanical properties of rolled Al-Mg-Mn 5xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Algendy Ahmed Y., Javidani Mousa, Khangholi Siamak Nikzad, Pan Lei et Chen X.-Grant. (2023). Enhanced Mechanical Strength and Electrical Conductivity of Al–Ni‐Based Conductor Cast Alloys Containing Mg and Si. Advanced Engineering Materials, e2301241.

Algendy Ahmed Y., Liu Kun et Chen X-Grant. (2021). Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy. Materials Characterization, 181, e111487.

Algendy Ahmed Y., Liu Kun et Chen X-Grant. (2020). Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels. MATEC Web of Conferences, 326, e02002.

Algendy Ahmed Y., Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2022). Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys. Materials Science and Engineering: A, 855, e143950.

Algendy Ahmed Y., Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2022). Evolution of discontinuous/continuous Al3(Sc,Zr) precipitation in Al-Mg-Mn 5083 alloy during thermomechanical process and its impact on tensile properties. Materials Characterization, 192, e112241.

Allahdini Anahaita, Momen Gelareh et Jafari Reza. (2019). Fabrication of a durable superhydrophobic coating for high voltage glass insulators. (2019, 2019, ). Montréal, Qc : CIGRE Canada.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2021). Development of a dual capsule self-healing silicone composite using poly(melamine-urea-formaldehyde) shells. Dans : 36th International Conference of the Polymer Processing Society , September 26-29, 2021, Montréal, Canada.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2022). Development of a dual capsule self-healing silicone composite using silicone chemistry and poly(melamine-urea-formaldehyde) shells. Journal of Applied Polymer Science, 139, (8), e51670.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2023). Room-temperature microcapsule-based self-healing and fluorine-free superhydrophobic coating. Materials Today Communications, 34, e105087.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2022). Transparent non-fluorinated superhydrophobic coating with enhanced anti-icing performance. Progress in Organic Coatings, 165, e106758.

Alyaldin Loay. (2017). Effects of alloying elements on room and high temperature tensile properties of Al-Si-Cu-Mg base alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Amara Belkacem. (2022). Utilisation du biocharbon dans la production des anodes en carbone. Thèse de doctorat, Université du Québec à Chicoutimi.

Amara Belkacem, Faouzi Fatima-Ezzahra, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2021). Modification of biocoke destined for the fabrication of anodes used in primary aluminum production. Fuel, 304, e121352.

Amara Belkacem, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2022). Effect of Coke Type on Partial Replacement of Coke with Modified Biocoke in Anodes Used in Primary Aluminum Production. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 818-825). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Amara Belkacem, Kocaefe Duygu, Kocaefe Yasar, Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2022). Partial Replacement of Petroleum Coke with Modified Biocoke during Production of Anodes Used in the Aluminum Industry: Effect of Additive Type. Applied Sciences, 12, (7), e3426.

Ammar Hany. (2006). Effet des imperfections de la coulée sur les propriétés en fatigue des alliages de fonderie aluminium silicium = Effect of casting imperfections on the fatigue properties of aluminum-silicon casting alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ammar Hany. (2010). Influence of metallurgical parameters on the mechanical properties and quality indices of Al-Si-Cu-Mg and Al-Si-Mg casting alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Amrani Salah. (2015). Impact de la préparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses. Thèse de doctorat, Université du Québec à Chicoutimi.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Effect of carbon anode production parameters on anode cracking. SN Applied Sciences, 3,

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Study on the cracking of carbon anodes used in aluminium industry. The Canadian Journal of Chemical Engineering, p. 1-12.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Coulombe Patrick. (2017). Evolution of anode properties during baking. International Journal of Innovative Science, Engineering & Technology, 4, (4), p. 301-309.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Morais Brigitte. (2016). Characterization of cracking mechanisms of carbon anodes used in aluminum industry by optical microscopy and tomography. Journal of Materials Engineering and Performance, 25, (10), p. 4274-4282.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Blainey Jerry. Quantitative evaluation of the cracking of carbon anodes by image analysis for aluminum industry. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Blaney Gerry. (2014). Effect of heating rate on the crack formation during baking in carbon anodes used in aluminum industry. Light Metals, p. 1175-1180.

Andoh Marc Alain, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Marceau Daniel et Morais Brigitte. (2016). Measurement of the electric current distribution in an anode. Light Metals, p. 889-894.

Arianpour Faranak. (2015). Elaboration of composite and chemically heterogeneous icephobic coatings. Thèse de doctorat, Université du Québec à Chicoutimi.

Arianpour Faranak, Farhadi Shahram, Farzaneh Masoud et Jafari Reza. (2017). Erratum to: Effect of heterogeneity on hydro/ice-phobic properties of alkylsilane/fluoro-alkylsilane-based coatings on Al substrates. Journal of Caotings Technology and Research, 14, (1), p. 277.

Arianpour Faranak, Farzaneh Masoud et Jafari Reza. (2016). Hydrophobic and ice-phobic properties of self-assembled monolayers (SAMs) coatings on AA6061. Progress in Organic Coatings, 93, p. 41-45.

Arici Anil. (2019). Development of Al-Si-Mg alloys for permanent mold casting and high-pressure vacuum die casting applications. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Arroyo Fernandez Oscar Henry, Jalbert Jocelyn, Rodriguez-Celis Esperanza, Duchesne Steve, Morin Brigitte et Fofana Issouf. (2020). Changes in mechanical properties of impregnated Nomex papers 410 and 910 during accelerated aging. Polymer Testing, 83, (106358), p. 1-13.

Arshad Dr., Momen Gelareh, Farzaneh Masoud et Nekahi Azam. (2017). Properties and applications of superhydrophobic coatings in high voltage outdoor insulation: A review. IEEE Transactions on Dielectrics and Electrical Insulation, 24, (6), p. 3630-3646.

Asadollahi Siavash, Jafari Reza et Farzaneh Masoud. (2016). Effect of HMDSO flow rate in nitrogen atmospheric plasma on the superhydrophobic characteristics of organosilicon-based coatings. Dans : 2016 IEEE International Conference on Plasma Science (ICOPS) , 19-23 June 2016, Banff, AB, Canada.

Ashoka S., Saleema Noormohammed et Sarkar Dilip K.. (2017). Tuning of superhydrophobic to hydrophilic surface : a facile one step electrochemical approach. Journal of Alloys and Compounds, 695, p. 1528-1531.

Ashoka S., Saleema Noormohammed et Sarkar Dilip K.. (2017). Tuning of superhydrophobic to hydrophilic surface: A facile one step electrochemical approach. Journal of Alloys and Compounds, 695, p. 1528-1531.

Asselin Daniel. (1993). Influence des defauts sur les propriétés mécaniques du composite Duralcan F3S.20S. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Attia Mohamed. (2019). Study of design and thermal treatment of automotive control arm fabricated from A357 semi-solid alloy. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Attia Mohamed, Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2020). Fatigue cycles and performance evaluation of accelerating aging heat treated aluminum semi solid materials designed for automotive dynamic components. Applied Sciences, 10, (9), p. 1-15.

Aubert Roger J., Truchon Martin, Sinusas Eric, Boussetoua Mohammed, Ouhrouche Mohand, Fortin Guy, Mercier Carol et Perron Jean. Electrical generator for rotating structure. .

Auger Marc, Baril Daniel, Parent Luc et Perron Jean. High temperature and abrasion resistant temperature measuring device. .

Avery Maurice, Lapointe Adam, Martin Jean-Pierre et Tremblay Pierre. (2006). Rapport du comité d'évaluation de la qualité de la recherche scientifique du CQRDA. Centre québécois de recherche et de développement de l'aluminium.

Azimi Yancheshme Amir, Allahdini Anahita, Maghsoudi Khosrow, Jafari Reza et Momen Gelareh. (2020). Potential anti-icing applications of encapsulated phase change material–embedded coatings; a review. Journal of Energy Storage, 31, e101638.

Azimi Yancheshme Amir, Enayati Saman, Kashcooli Yaser, Jafari Reza, Ezzaidi Hassan et Momen Gelareh. (2022). Dynamic behavior of impinging drops on water repellent surfaces: Machine learning-assisted approach to predict maximum spreading. Experimental Thermal and Fluid Science, 139, e110743.

Azimi Yancheshme Amir, Hassantabar S., Maghsoudi Khosrow, Keshavarzi Samaneh, Jafari Reza et Momen Gelareh. (2021). Integration of experimental analysis and machine learning to predict drop behavior on superhydrophobic surfaces. Chemical Engineering Journal, 417, e127898.

Azimi Yancheshme Amir, Hassantabar S., Maghsoudi Khosrow, Keshavarzi Samaneh, Jafari Reza et Momen Gelareh. (2021). Integration of experimental analysis and machine learning to predict drop behavior on superhydrophobic surfaces. Chemical Engineering Journal, 417, e127898.

Azimi Yancheshme Amir, Momen Gelareh et Jafari Reza. (2020). Mechanisms of ice formation and propagation on superhydrophobic surfaces: A review. Advances in Colloid and Interface Science, 279, e102155.

Azizi Sohrab, Momen Gelareh, Ouellet-Plamondon Claudiane et David Éric. (2020). Enhancement in electrical and thermal performance of high‐temperature vulcanized silicone rubber composites for outdoor insulating applications. Journal of Applied Polyer Science, 137, e49514.

Azizi Sohrab, Momen Gelareh, Ouellet-Plamondon Claudiane et David Éric. (2020). Performance improvement of EPDM and EPDM/Silicone rubber composites using modified fumed silica, titanium dioxide and graphene additives. Polymer Testing, 84,

B

Baatti Abdessamad. (2019). Synthèse et développement de nanoparticules pour la fabrication de nanocomposites à base de thermoplastique. Thèse de doctorat, Université du Québec à Chicoutimi.

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad et Fofana Issouf. (2015). Metaheuristics as a solving approach for the infrared heating in the thermoforming process. Groupe d'études et de recherche en analyse des décisions GERAD.

Baiteche Mounir, Kocaefe Duygu, Kocaefe Yasar S., Marceau Daniel, Morais Brigitte et Lafrance Jacques. (2015). Description and applications of a 3D mathematical model for horizontal anode baking furnaces. Light Metals, p. 1115-1120.

Baiteche Mounir, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. A 3D mathematical model of a horizontal anode baking furnace as a design tool. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Barakat Hussein Mohamed Aly Abdelsalam. (2019). Drilling and tapping characteristics of Al-Cu and Al-Si cast alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Fuel consumption evaluation of an optimized new hybrid pneumatic-combustion vehicle engine on several driving cycles. International Journal of Engine Research, 13, (3), p. 253-273.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). A new hybrid pneumatic combustion engine to improve fuel consumption of wind-Diesel power system for non-interconnected areas. Applied Energy, 96, p. 459-476.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Optimal management of compressed air energy storage in a hybrid wind-pneumatic-diesel system for remote area's power generation. Energy, 84, p. 267-278.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Pneumatic hybridization of a diesel engine using compressed air storage for wind-diesel energy generation. Energy, 38, (1), p. 264-275.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. Pneumatic hybridization of diesel engine in a hybrid wind-diesel installation with compressed air energy storage. Dans : 4th Int. Conference on Integrated Modeling and Analysis in Applied Control and Automation, IMAACA 2010, Held at the International Mediterranean and Latin American Modeling Multiconference, I3M 2010 , October 13-15, 2010, Fes, Maroc.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Required time response of a variable valve actuator equiping a hybrid pneumatic-combustion engine. International Journal of Engine Research, 13, (5), p. 514-528.

Bédard Frédéric, Fiset Mathieu, Bastien Josée et Mitchell Denis. (2019). Shear strengthening of thick concrete slabs accounting for loading during strengthening. Dans : Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5 , 15–17 July 2019, London, United Kingdom.

Beisswenger Arlene. (2006). AS-5900 some changes. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2006, Lisbon, Portugal.

Beisswenger Arlene. (2008). AS5900 Update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 12, 2008, Warsaw, Pologna.

Beisswenger Arlene. (2007). AS5900 Update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 14, 2007, Montréal, Québec.

Beisswenger Arlene. (2010). AS5900 Update (Areodynamic Testing). Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2010, Montréal, Québec.

Beisswenger Arlene. (2007). Snow pellets tests. Dans : SAE Holdover Time Sub-Committee , Novembre 14, 2007, Montréal, Québec.

Beisswenger Arlene, Laforte Caroline et Perron Jean. (2011). Issues and testing of non-glycol aircraft ground deicing fluids. Dans : SAE Technical Papers - SAE 2011 International Conference on Aircraft and Engine Icing and Ground Deicing , 13-17 June 2011, Chicago, IL.

Beisswenger Arlene et Leroux Jacques. (2011). AMS1428 : rewording of rational for section 3.2.2.5 thin film thermal stability (to simulate heated leading edge dry out). Dans : SAE G-12 Fluids Subcommittee Meeting , May 2011, San Francisco, CA.

Beisswenger Arlene et Perron Jean. Laboratory testing of aircraft anti-icing fluid rehydrated gel residues. Dans : SAE Technical Papers - SAE Aircraft and Engine Icing International Conference , 24-27 September 2011, Seville; Spain.

Beisswenger Arlene, Wang Xiaofei, Laforte Jean-Louis et Perron Jean. Simulation of freezing and frozen precipitation for the evaluation of de/anti-icing systems. Dans : SAE Tehnical Paper Series, SAE Aircraft & Engine Icing International Conference , Septembre 24-27, 2007, Seville, Spain.

Béland J.F, Fafard Mario, Rahem Ahmed, D'Amours Guillaume et Côté T.. (2011). Optimization on the cold drawing process of 6063 aluminium tubes. Applied Mathematical Modelling, 35, (11), p. 5302-5313.

Benaissa Sanae, Momen Gelareh, Harvey Derek, Taghavi Seyed Mohammad et Khawaja Hassan. (2023). Optimization of ground icing protection for aircraft : snow endurance tests, rheological analysis and thermography of anti-icing fluids. Dans : Concours d'affiches

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2017). A non-destructive technique for the on-line quality control of green and baked anodes. Metals, 7, (4), p. 128-138.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. A non-destructive technique for the on-line quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Desmeules Jean-François. An experimental testing of the SERMA technology for the quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Bergeron-Lagacé Charles-Luc. (2012). Réactivité de l'anode et désulfuration : effet du niveau de calcination du coke. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2017). An artificial neural network model for predicting the CO2 reactivity of carbon anodes used in the primary aluminum production. Neural Computing and Applications, 28, (3), p. 553-563.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2015). Comparison of linear multivariable, partial least square regression, and artificial neural network analyses to study the effect of different parameters on anode properties. Light Metals, p. 1129-1134.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2013). Determination of coke, pitch and pores/cracks in green anode by image analysis. Journal of Surface Engineered Materials and Advanced Technology, 3, p. 1-6.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Application of the artificial neural network (ANN) in predicting anode properties. Light Metals, p. 1189-1194.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). A model for predicting the electrical resistivity of baked anodes. Light Metals, p. 1195-1199.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. Study of the effect of granulometry on coke bulk density using artificial neural network. Dans : Materials Science & Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Lafrance Jacques. (2015). Traceability of raw materials in silos in an anode plant. Light Metals, p. 1073-1078.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Arunima, Morais Brigitte et Chabot Jérôme. (2014). Characterization of dry aggregates in carbon anodes by image analysis. Light Metals, p. 1111-1114.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2012). Application of a new procedure for the optimization of variable thickness drawing of aluminium tubes. CIRP Journal of Manufacturing Science and Technology, 5, (2), p. 142-150.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2015). Global optimisation of the production of complex aluminium tubes by the hydroforming process. CIRP Journal of Manufacturing Science and Technology, 9, p. 1-11.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for production of variable thickness aluminium tubes : numerical and experimental studies. Journal of Materials Processing Technology, 211, (4), p. 578-589.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Perspectives for the application of variable thickness aluminium tubes in hydroforming of complex tubes. Materials Science Forum, 690, p. 447-450.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Guillot Michel, Rahem Ahmed et Fafard Mario. (2013). Numerical and experimental studies on the new design concept of hydroforming dies for complex tubes. Materials and Design, 47, p. 766-778.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Rahem Ahmed, Guillot Michel et Fafard Mario. (2010). Optimization on the production of variable thickness aluminium tubes. Dans : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, MSEC2010 , October 12-15, 2010, Erie, Pennsylvania.

Bihamta Reza, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Numerical studies on the production of variable thickness aluminium tubes for transportation purposes. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Binet Chantal. (2000). Modélisation numérique, modélisation physique et validation de l'écoulement de cuves de galvanisation. Thèse de doctorat, Université du Québec à Chicoutimi.

Blanchette Hugues. (2006). Développement d'un système de contrôle de qualité pour les lopins d'aluminium semi-solide[s] obtenus avec le procédé SEED. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bolduc Sébastien et Kiss László. (2020). Sensitivity study of the influence of the water boiling parameters on aluminum semi-continuous DC casting. International Journal of Thermal Sciences, 151, (106276),

Bolouri Amir et Chen X-Grant. (2018). Transient rheological behavior of semisolid SEED-processed 7075 aluminum alloys in rapid compression. Metallurgical and Materials Transactions B, 49, (5), p. 2858-2867.

Bolouri Amir, Liu Kun et Chen X-Grant. (2016). Effects of iron-rich intermetallics and grain structure on semisolid tensile properties of Al-Cu 206 cast alloys near solidus temperature. Metallurgical and Materials Transactions A,

Bouaïcha Amine. (2012). Étude de la fatigue d'un bras de suspension en alliage d'aluminium A357 semi-solide élaboré selon le procédé SEED. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bouaïcha Amine. (2016). Étude de la fatigue et analyse du moulage d’un bras de suspension fabriqué en alliage d'aluminium semi-solide. Thèse de doctorat, Université du Québec à Chicoutimi.

Bouazara Bassem. (2022). Étude du comportement des gouttelettes d’eau impactant des surfaces micro-structurées. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bouchard Marie-Louise. (2011). Utilisation d'une technique de traçage ferromagnétique pour étudier le comportement et le déplacement des boues rouges dans un décanteur. Thèse de doctorat, Université du Québec à Chicoutimi.

Bouchard Gilles, Laforte Jean-Louis et Louchez Patrick R.. (1995). Wind tunnel study on lift reduction on a wing section covered with anti-icing fluid in supercooled precipitation. Canadian Aeronautics and Space Journal, 41, (4), p. 185-192.

Boulanger Joan, Lalancette Francis, Gosselin A., Dion Lukas, Gaboury Simon, Guimond L., Simard C. et Blais A.. (2020). A taxonomy of low-voltage perfluorocarbon emissions in primary aluminium production cells. Dans : Conference of Metallurgists , 24-27 aug 2020, Fairmont Royal York, Toronto.

Bourgeois Thierry, Steward Nigel Ian, Huni Jean-Paul, Tremblay François et Perron Jean. Fluid bed system for cooling hot spent anode butts. .

Boussetoua Mohammed, Perron Jean et Ouhrouche Mohand. Contribution to the study and design of an electro-thermal de-icing/anti-icing system applied to rotorcraft. Dans : 70th American Helicopter Society international annual forum 2014 , 20-22 May 2014, Montreal, Quebec.

Bouvais Adrien, Dion Lukas, Roger Thomas, Kiss László, Bonneau Guillaume, Bilodeau Jean-François et Guérard Sébastien. (2021). Experimental Study and Visualization of the Thermal and Dissolution Flux Using Schlieren Methods to Improve the Understanding of the Kinetics of Alumina Dissolution in Cryolitic Melts. Dans : 39th Hybrid Conference and Exhibition ICSOBA 2021 , 22-25 November 2021, Manama, Bahrain & online.

Brahami Yassine, Saeidi Ali, Fiset Mathieu et Ba Kadiata. (2022). The effects of the type and quantity of recycled materials on physical and mechanical properties of concrete and mortar: A review. Sustainability, 14, (22), e14752.

Brassard Jean-Denis. (2016). Revêtements nanostructurés pour la protection des métaux dans les environnements marins. Thèse de doctorat, Université du Québec à Chicoutimi.

Brassard Jean-Denis. (2020). Runway Deicing Product Anti-icing Performance Test Working Group Update. Dans : SAE G-12 Runway Deicing Product RDP Committees , November 02, 2020

Brassard Jean-Denis, Beaulieu Audrey, Tremblay Marc Mario et Momen Gelareh. (2022). Assessment of runway surface conditions by British Pendulum testing under the Global Reporting Format winter conditions. Applied Sciences, 12, (19), e9646.

Brassard Jean-Denis, Blackburn Caroline, Toth Miklos et Momen Gelareh. (2022). Ice accretion, shedding, and melting on cable-stayed bridges: A laboratory performance assessment. Cold Regions Science and Technology, 204, e103672.

Brassard Jean-Denis et Laforte Caroline. (2017). Silicone based icephobic coating assessment under offshore winter conditions. Dans : 27th International Ocean and Polar Engineering Conference , June 25–30, 2017, San Francisco, California, USA.

Brassard Jean-Denis, Laforte Caroline, Guérin Frédéric et Blackburn Caroline. (2019). Icephobicity : definition and measurement regarding atmospheric icing. Dans Christopher J. Wohl et Douglas H. Berry (dir.), Contamination mitigating polymeric coatings for extreme environments. (p. 123-143). Advances in Polymer Science. Switzerland AG : Springer, Cham.

Brassard Jean-Denis, Laforte Caroline, Tremblay Marc Mario et Volat Christophe. (2019). Runway Deicing Product Anti/Deicing Performance Assessment: Review and Future Directions. Dans : International Conference on Icing of Aircraft, Engines, and Structures SAE International , June 17-21, 2019, Minneapolis USA.

Brassard Jean-Denis, Laforte Caroline et Volat Christophe. (2019). Type IV anti-Icing Fluid Subjected to Light Freezing Rain: Visual and Thermal Analysis. Dans : International Conference on Icing of Aircraft, Engines, and Structures, SAE International , June 17-21 2019, Minneapolis USA.

Brassard Jean-Denis, Laforte Jean-Louis, Blackburn Caroline, Perron Jean et Sarkar Dilip K.. (2017). Silicone based superhydrophobic coating efficient to reduce ice adhesion and accumulation on aluminum under offshore arctic conditions. Ocean Engineering, 144, p. 135-141.

Brassard Jean-Denis, Perron Jean et Sarkar Dilip K.. (2016). A short review on the applications of the superhydrophobic coatings on metals. Dans : 28th International Mineral Processing Congress, IMPC 2016 , 11-15 September 2016, Quebec City Convention CenterQuebec City.

Brassard Jean-Denis, Posteraro Dany, Sobhani Sarah, Ruggi Marco et Momen Gelareh. (2021). A Multi-Tool Analysis to Assess the Effectiveness of Passive Ice Protection Materials to Assist Rotorcraft Manual De-Icing. Applied Sciences, 11, (24), e11847.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Fluorine Based Superhydrophobic Coatings. Applied Sciences, 2, (2), p. 453-464.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2015). Studies of drag on the nanocomposite superhydrophobic surfaces. Applied Surface Science, 324, (1), p. 525-531.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Surface modification and functionalization of oxide nanoparticles for superhydrophobic applications. Advanced Materials Research, 409, p. 469-473.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2011). Synthesis of Monodisperse Fluorinated Silica Nanoparticles and Their Superhydrophobic Thin Films. ACS Applied Materials & Interfaces, 3, (9), p. 3583-3588.

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean, Audibert-Hayet Annie et Melot Denis. (2015). Nano-micro structured superhydrophobic zinc coating on steel for prevention of corrosion and ice adhesion. Journal of Colloid and Interface Science, 447, p. 240-247.

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean et Fortin Guy. (2010). Nanostructured superhydrophobic coatings using fluoroalkylsilane modified silica nanoparticles. 1st conference on Nanotechnologies: Fundamentals and applications,

Bregnocchi Agnese, Jafari Reza et Momen Gelareh. (2022). Design strategies for antiviral coatings and surfaces: A review. Applied Surface Science Advances, 8, e100224.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Investigation of the formability limit of aluminium tubes drawn with variable wall thickness. Journal of Materials Processing Technology, 211, (3), p. 402-414.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for determination of formability limit in the tube drawing process. Dans : TMS2011 Annual Meeting & Exhibition : Supplemental Proceedings : Volume 3 : General Paper Selections , 27 February - March 3, 2011, San Diego, California.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, Rahem Ahmed et Fafard Mario. (2011). Effect of cross section reduction on the mechanical properties of aluminium tubes drawn with variable wall thickness. Journal of Manufacturing Science and Engineering, 133, (6), p. 1-10.

Bui Rung-Tien, Hachette R., Simard G., Perron Jean et Dessureault J. F.. Computer simulation of the anthracite calcining furnace. Dans : Light metals 1999 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the 128th TMS Annual Meeting , February 28-March 4, 1999, San Diego, California.

Bui Rung-Tien, Hachette R., Simard G., Perron Jean et Dessureault J. F.. A control strategy for the anthracite calciner. Dans : Light metals 2000 : proceedings of the International Symposium on Light Metals - MetSoc 39th Annual Conference of Metallurgists of CIM , August 20-23, 2000, Ottawa, Ontario.

Bui Rung-Tien et Perron Jean. (1988). Performance analysis of the aluminum casting furnace. Metallurgical Transactions B, 19, (2), p. 171-180.

Bui Rung-Tien, Perron Jean et Fillion C.. Model-based control for industrial processes using a virtual laboratory. Dans : 13th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE 2000 , June 19–22, 2000, New Orleans, Louisiana.

Bui Rung-Tien, Perron Jean et Read M.. (1993). Model-based optimization of the operation of the coke calcining kiln. Carbon, 31, (7), p. 1139-1147.

Bui Rung-Tien, Simard G., Charette André, Kocaefe Yasar S. et Perron Jean. (1995). Mathematical modeling of the rotary coke calcining kiln. The Canadian Journal of Chemical Engineering, 73, (4), p. 534-545.

Bui Rung-Tien, Simard G., Kocaefe Yasar S., Charette André, Lacroix M., Jain S., Perron Jean, Proulx André L. et Barr P. V.. (1991). 3D-simulation of the thermal performance of a coke calcining kiln. International Symposium on Extraction, Refining and Fabrication of Light Metals, 24, p. 307-314.

Bui Rung-Tien, Tikasz L.G. et Perron Jean. Trends in intelligent process control methods in the primary aluminum industry. Dans : IPPM'99 : proceedings of the Second International Conference on Intelligent Processing and Manufacturing of Materials : Hilton Hawaiian Village Hotel , July 10-15, 1999, Honolulu, Hawaii.

Bureau Julie. (2017). Étude de l’amélioration de la qualité des anodes par la modification des propriétés du brai. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Bureau Julie, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Quantification of sodium present in dry aggregates and anodes. Light Metals, p. 877-881.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2018). Étude de l’amélioration des propriétés des anodes par le brai modifié. The Canadian Journal of Chemical Engineering, 96, (8), p. 1697-1706.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2018). Modification des propriétés du brai de goudron de houille utilisé dans la fabrication des anodes. Canadian Journal of Chemical Engineering, 96, (2), p. 545-553.

Bureau Julie, Rastegari Armita, Kocaefe Duygu, Kocaefe Yasar S. et Darmstadt Hans. (2020). Additive selection for coal tar pitch modification in aluminium industry. Light Metals, 2020, p. 1329-1337.

C

Cai Fanglin. (2007). Conception et analyse mécaniques des pièces en aluminium pour application automobile. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Carreira A. J., Maghsoudi Khosrow, Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2019). Self-Cleaning Properties of Injection Molded Super-Hydrophobic Silicone Rubber for HV Insulators. Dans INMR World Congress (INMR 2019). (2019, 2019, p. 114). Westmount (Montréal) : INMR.

Chamam Yasmine, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2016). Effect of heating rate during baking on the properties of carbon anodes used in aluminum industry. Light Metals, p. 947-951.

Charest Philippe, Potvin André, Demers Claude M. H. et Ménard Sylvain. (2019). Assessing the complexity of timber gridshells in architecture through shape, structure, and material classification. BioResources, 14, (1), p. 1364-1378.

Charpentier Claire, Brassard Jean-Denis, Momen Gelareh et Perron Jean. (2023). Development of a dynamic ice penetration model for runway de-icing products through performance experimental characterization. Cold Regions Science and Technology, 213, e103932.

Charpentier Claire, Brassard Jean-Denis, Momen Gelareh et Perron Jean. (2023). Development of a dynamic ice penetration model for runway de-icing products through performance experimental characterization. Cold Regions Science and Technology, 213, e103932.

Chehouri Adam. (2013). A Comparative study of static and fatigue behaviors for various composite orthotropic properties for a wind turbine using a coupled FEM-BEM method. Mémoire de maîtrise, Université Libanaise.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi-objective optimization. Dans Abdel Ghani Aissaoui et Ahmed Tahour Tahour (dir.), Wind Turbines : Design, Control and Applications. (p. 121-147). Rijeka, Croatia : InTech.

Chen Hu. (2005). L'effet du taux de refroidissement, modification au strontium, traitement thermique du liquide et la mise en solution sur les caractéristiques des particules du silicium eutectique et les propriétés de traction de l'alliage A356. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen Sinan. (2018). Effet de l’addition de molybdène et des conditions de traitement thermique sur l’évolution des dispersoïdes et les propriétés de température élevée de l’alliage de fonderie A356. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen Sinan, Liu Kun et Chen X-Grant. (2019). Elevated-temperature low-cycle fatigue behaviors of Al-Si 356 and 319 foundry alloys. Dans : TMS-Light Metals 2019 , March 10-14, San Antonio, Texas.

Chen Sinan, Liu Kun et Chen X-Grant. (2019). Precipitation behavior of dispersoids and elevated-temperature properties in Al–Si–Mg foundry alloy with Mo addition. Journal of Materials Research, 34, (18), p. 3071-3081.

Chen Zhixing. (2019). L'identification de la calorimétrie à balayage différentiel (DSC) des conditions de traitement thermique des alliages d'aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Chen Zhixing, Elgallad Emad M., Liu Kun et Chen X-Grant. (2022). Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions. Metallography, Microstructure, and Analysis,

Chen Zhixing, Liu Kun, Elgallad Emad M., Breton Francis et Chen X-Grant. (2020). Differential scanning calorimetry fingerprints of various heat-treatment tempers of different aluminum alloys. Metals, 10, (6), e763.

Churchill Frederick, Perron Jean et Fortin Guy. Wind turbine apparatus = Dispositif pour éolienne. .

Colbert Josée. (2007). Caractérisation de la fraction solide dans les lopins semi-solides produits par le procédé SEED. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Couture Adrien. (2020). Automatisation de la modélisation numérique des microstructures de matériaux hétérogènes basée sur une intégration CAO-Calcul. Thèse de doctorat, Université du Québec à Chicoutimi.

Cui Liying, Zhang Zhan et Chen X-Grant. (2023). Development of lightweight Al-based entropy alloys for elevated temperature applications. Journal of Alloys and Compounds, 938, e168619.

Cui Liying, Zhang Zhan et Chen X-Grant. (2023). Microstructure and mechanical properties of novel Al–Cu–Mg–Zn lightweight entropy alloys for elevated-temperature applications. Materials Characterization, 200, e112927.

D

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Crashworthiness of aluminium tubes ; Part 2: improvement of hydroforming operation to increase absorption energy. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Effects of mesh size and remapping on the predicted crash response of hydroformed tubes. Dans : The 6th European LS-DYNA Users' Conference , May 2007, Gothenburg, Sweden.

D'Amours Guillaume, Rahem Ahmed, Williams Bruce, Worswick Michael et Mayer Robert. (2007). Crashworthiness of aluminium tubes ; Part 1 : Hydroforming at different corner-fill radii and end feeding levels. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

De la Sablonnière Hugo. (1996). Effet du titre en magnésium sur les propriétés de l'alliage d'aluminium 319 (Al-Si-Cu-Mg). Mémoire de maîtrise, Université du Québec à Chicoutimi.

De Debasis et Sarkar Dilip K.. (2017). Superhydrophobic ZnAl double hydroxide nanostructures and ZnO films on Al and glass substrates. Materials Chemistry and Physics, 185, p. 195-201.

De Debasis, Sarkar Dilip K. et Kocaefe Duygu. Nanostructured superhydrophobic ZnO surface layer on Al-substrate. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Déry Patricia. (2001). Étude de la croissance des grains à l'aide d'un appareil de mesure électrique. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Desgroseillers B., Perron Jean, Laurin P., Ménard O. et Martin J.. Combustion of petroleum coke dust as a partial substitute for natural gas and oil in the alumina trihydrate calcination process. Dans : Light Metals 1996: Proceedings of the Technical Sessions Presented by the Tms Light Metals Committee at the 125th Tms Annual Meeting , February 4-8 1996, Anaheim, California.

Desroches Dany. (2018). Validation de l’adéquation de la fluorescence X portative pour le contrôle de qualité du quartzite dans un environnement industriel. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Numerical simulation of the energy production losses due to icing of a wind turbine. Dans : International Conference on Energy Conversion and Conservation - CICME'10 , April 22-25, 2010, Hammamet, Tunisia.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Simulation numérique des pertes énergétiques d'une éolienne dues au givrage. Dans : CanWEA 2010 Conference and Exhibition , 1-3 novembre, 2010, Montreal, Quebec.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Software tool to predict the wind Energy production losses due to icing. Dans : 2011 IEEE Electrical Power and Energy Conference , 3-5 october 2011, Winnipeg, MB, Canada.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Perron Jean et Ilinca Adrian. Numerical simulation of the wind energy production losses due to icing. Dans : WINDPOWER 2011 Conference and exhibition , May 22-25, 2011, Anaheim, USA.

Dion Lukas. (2018). Modelisation of perfluorocarbon emissions based on the alumina distribution and local current density in an aluminium electrolysis cell. Thèse de doctorat, Université du Québec à Chicoutimi.

Dion Lukas, Gaboury Simon, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2018). New approach for quantification of perfluorocarbons resulting from high voltage anode effects. Dans : 147th Annual Meeting & Exhibition, TMS Ligth Metals 2018 , March 11-15, 2018, Phoenix, AZ.

Dion Lukas, Gaboury Simon, Picard Frédéric, Kiss László, Poncsák Sándor et Morais Nadia. (2018). Universal approach to estimate perfluorocarbons emissions during individual high-voltage anode effect for prebaked cell technologies. Journal of the Minerals, Metals and Materials Society, 70, (9), p. 1887-1892.

Dion Lukas, Kiss László, Chartrand Patrice, Dufour Gilles et Laflamme François. (2013). Sodium content in aluminum and current efficiency — correlation through multivariate analysis. Dans : 142nd Annual Meeting & Exhibition, TMS Light Metals 2013 , March 3-7, 2013, San Antonio, Texas.

Dion Lukas, Kiss László et Coursol Pascal. (2012). Development of a dynamic mass balance model for predicting metalpurity at Aluminerie Alouette. Dans : Proceedings of the 8th international conference on mechanical engineering , May 24-25, 2012, Budapest, Hungary.

Dion Lukas, Kiss László, Lavoie Dany et Arvisais Jean-Paul. (2014). Developing a new process indicator based on the relationship between an electrolysis cell impurity balance and its incident. Dans : 143rd Annual Meeting & Exhibition, TMS Light Metals 2014 , February 16-20, 2014, San Diego, CA.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2016). Influence of hooding conditions on gas composition at duct end of an electrolysis cell. Dans : 34th International Conference and Exhibition of ICSOBA , 3 to 6 October, 2016, Hotel Palace Royal in Quebec, Quebec.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2016). Prediction of low-voltage tetrafluoromethane emissions based on the operating conditions of an aluminium electrolysis cell. Journal of The Minerals, Metals & Materials Society, 68, (9), p. 2472-2482.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2018). Simulator of non-homogenous alumina and current distribution in an aluminum electrolysis cell to predict low-voltage anode effects. Metallurgical and Materials Transactions B, 49, p. 737-755.

Dion Lukas, Lagacé Charles-Luc, Evans James W., Victor Ron et Kiss László. (2015). On-line monitoring of anode currents to understand and improve the process control at Alouette. Dans : 144th Annual Meeting & Exhibition, TMS Light Metals 2015 , March 15-19, 2015, Orlando, Florida.

Dion Lukas, Lagacé Charles-Luc, Kiss László et Poncsák Sándor. (2016). Using artificial neural network to predict low voltage anode effect PFCs at the duct end of an electrolysis cell. Dans : 145th Annual Meeting & Exhibition, TMS Light Metals 2016 , February 14-18, 2016, Nashville, Tennessee.

Dion Lukas, Lagacé Charles-Luc, Laflamme François, Godefroy Antoine, Evans James W., Kiss László et Poncsák Sándor. (2017). Preventive treatment of anode effects using on-line individual anode current monitoring. Dans : 146th Annual Meeting & Exhibition, TMS Light Metals 2017 , September 2017, San Diego, CA.

Dion Lukas, Marks Jerry, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2017). Quantification of perfluorocarbons emissions during high voltage anode effects using non-linear approach. Journal of Cleaner Production, 164, p. 357-366.

Dion Lukas, Nunez Pernelle, Wong David, Gaboury Simon et Spirin Alexey. (2018). Evaluation of time consistency when quantifying emissions of perfluorocarbons resulting from low voltage anode effects. Dans : 147th Annual Meeting & Exhibition, TMS Ligth Metals 2018 , March 11-15, 2018, Phoenix, AZ.

Dion-Martin Olivier, Fafard Mario, Rahem Ahmed et D'Amours Guillaume. (2013). Characterization of AA5754 alloy for identification of Barlat's YLD2000‐2d yield criterion. Dans Jiann‐Yang Hwang, Chengguang Bai, John Carpenter, Shadia J. Ikhmayies, Bowen Li, Sergio Neves Monteiro, Zhiwei Peng et Mingming Zhang (dir.), Characterization of Minerals, Metals, and Materials 2013. (p. 53-65). Hoboken, N.J : Wiley.

Dotan A., Dodiuk H., Laforte Caroline et Kenig S.. (2009). The relationship between water wetting and ice adhesion. Journal of Adhesion Science and Technology, 23, (15), p. 1907-1915.

Dubois Michèle. (1996). Modélisation mathématique d'un four rotatif de calcination d'alumine. Mémoire de maîtrise, Université du Québec à Chicoutimi.

E

Ebrahimi G. R., Arabshahi H. et Javdani Mousa. (2010). Hot deformation behavior of Nb-V microalloyed steel. Journal of Mechanical Engineering Research, 2, (5), p. 92-96.

Ebrahimi G. R., Javdani Mousa et Arabshahi H.. (2010). Effect of thermo-mechanical parameters on microstructure and mechanical properties of microalloyed steels. Brazilian Journal of Physics, 40, (4), p. 454-458.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Effect of Si Level on the Evolution of Zr‐Bearing Dispersoids and the Related Hot Deformation and Recrystallization Behaviors in Al–Si–Mg 6xxx Alloys. Advanced Engineering Materials, e2101606.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization. Philosophical Magazine, p. 1-17.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Nucleation and transformation of Zr-bearing dispersoids in Al–Mg–Si 6xxx alloys. Journal of Materials Research,

Elashery Ali. (2022). Effect of Zr-bearing dispersoids evolution on hot deformation and recrystallization of 6xxx alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Elashri A., Elgallad E. M., Parson Nick et Chen X-Grant. (2021). Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy. Journal of Materials Engineering and Performance, 30, p. 7851-7862.

Elgallad Emad Eldin. (2010). Effect of additives on the mechanical properties and machinability of a new aluminum-copper base alloy. Thèse de doctorat, Université du Québec à Chicoutimi.

Elgallad Emad Eldin, Zhang Zhan et Chen X-Grant. (2017). Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy. Physica B: Condensed Matter, 514, p. 70-77.

Elgallad Emad M., Chen Zhixing et Chen X-Grant. (2023). On the Room- and Elevated-Temperature Tensile Properties of Hot-Rolled 6082 Alloys Containing Thermally Stable Dispersoids. Journal of Materials Engineering and Performance,

Elhadad Shimaa. (2003). Effect of trace elements on the microstructure and porosity formation in 319 type Al-Si-Cu alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Elsebaie Ossama. (2010). Effects of strontium-modification, iron-based intermetallics and aging conditions on the impact toughness of Al-(6-11)%Si alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Elsebaie Ossama. (2006). L'effet de l'addition du "mischmetal", du taux de refroidissement et du traitement thermique sur la microstructure et la dureté des alliages Al-Si de type 319, 356, et 413 = Effect of mischmetal, cooling rate and heat treatment on the microstructure and hardness of 319, 3456, and 413 Al-Si alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Elsharkawi Ehab. (2011). Effects of metallurgical parameters on the decomposition of ?-AlFeMgSi phase in AL-SI-MG alloys and its influence on the mechanical properties. Thèse de doctorat, Université du Québec à Chicoutimi.

Ergin Guvenc. (2006). Étude de la mouillabilité des particules granulaires par les alliages d'aluminium durant la filtration d'aluminium. Thèse de doctorat, Université du Québec à Chicoutimi.

Errouissi Rachid, Ouhrouche Mohand et Benzaioua Ammar. (2010). Robust nonlinear predictive controller for multivariable nonlinear systems with different relative degree. Dans : 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) , 06-09 july 2010, Montreal, QC, Canada.

Eslami Esmaeil, Jafari Reza et Momen Gelareh. (2021). A review of plasma-based superhydrophobic textiles: theoretical definitions, fabrication, and recent developments. Journal of Coatings Technology and Research,

Evens James W., Dion Lukas, Laflamme François et Lagacé Charles-Luc. (2016). Recent on-line measurements of individual anode currents at Alouette. Dans : 34th International Conference and Exhibition of ICSOBA , 3 to 6 October, 2016, Hotel Palace Royal in Quebec, Quebec.

F

Fakhouri H., Smith W., Pulpytel Jerome, Zolfaghari A., Mortaheb Hamid Reza, Meshkini Fateme, Jafari Reza et Arefi-Khonsari F.. (2011). Enhancement of NMP degradation under UV light by nitrogen-doped TiO2 thin films using a design of experiment. Journal of Nano- and Electronic Physics, 3, (1), p. 26-40.

Fakhouri Houssam, Pulpytel Jerome, Smith Wilson, Zolfaghari Alireza, Mortaheb Hamid Reza, Meshkini Fateme, Jafari Reza, Sutter Eliane et Arefi-Khonsari Farzaneh. (2014). Control of the Visible and UV Light Water Splitting and Photocatalysis of Nitrogen Doped TiO2 Thin Films Deposited by Reactive Magnetron Sputtering. Applied Catalysis B: Environmental, 144, p. 12-21.

Fakorede Chabi Oloufemi, Feger Zoé, Ibrahim Hussein, Ilinca Adrian, Perron Jean et Masson Christian. (2016). Ice protection systems for wind turbines in cold climate: characteristics, comparisons and analysis. Renewable and Sustainable Energy Reviews, 65, p. 662-675.

Fall El Hadji Babacar. (1995). Extension de la méthode flash à de hautes températures. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Farhadi Cheshmeh Morvari Gholamali. (1999). Les effets des éléments de trace sur les caractéristiques des alliages de type 6XXX pour les applications automobiles. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Farhadi Shahram. (2015). Development of nanostructured coatings for protecting the surface of aluminum alloys against corrosion and ice accretion = Développement de revêtements nanostructurés pour protéger la surface des alliages d'aluminium contre la corrosion et l'accumulation de glace. Thèse de doctorat, Université du Québec à Chicoutimi.

Farid H., Farzaneh Masoud, Saeidi Ali et Erchiqui Fouad. (2016). A contribution to the study of the compressive behavior of atmospheric ice. Cold Regions Science and Technology, 121, p. 60-65.

Farid Redouane. (2019). Development of durable, ecologic and corrosion resistant non-chromate coatings for aluminum. Thèse de doctorat, Université du Québec à Chicoutimi.

Farid Redouane, Rajan Karthikeyan et Sarkar Dilip K.. (2019). Enhanced corrosion protection of aluminum by ultrasonically dip coated sodium silicate thin films. Surface and Coatings Technology, 374, p. 355-361.

Farid Redouane, Sarkar Dilip K. et De D.. (2019). Facile electrodeposition and corrosion properties of zirconium-based superhydrophobic thin films on aluminum. International Journal of Wettability Science & Technology, 1, (2), p. 121-136.

Farkoosh Amir Rezaei, Javidani Mousa, Hoseini M., Larouche Daniel et Pekguleryuz M.. (2013). Phase formation in as-solidified and heat-treated Al–Si–Cu–Mg–Ni alloys: Thermodynamic assessment and experimental investigation for alloy design. Journal of Alloys and Compounds, 551, p. 596-606.

Farzaneh Masoud et Fofana Issouf. (2012). Review of streamer dynamics and surface charge accumulation on ice surfaces. Electrical and Electronic Engineering, 2, (6), p. 389-396.

Farzaneh Masoud et Laforte Jean-Louis. (1997). A laboratory simulation of wet icing build-up On H.V. insulators. Dans The Seventh International Offshore and Polar Engineering Conference. (1997, ). Golden, Colo. : International Society of Offshore and Polar Engineers.

Ferland Jacqueline. (1989). Étude de la valeur d'usage de brais d'imprégnation. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2022). Design of concrete members strengthened in shear with vertical bonded bars. Dans : 11th International Conference on Short and Medium Span Bridgest , July 19-22, 2022, Toronto, Ontario, Canada.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2014). Drilled-in shear reinforcement for concrete thick slabs : modelling aspects. Dans : 10th fib International PhD Symposium in Civil Engineering , July 21 to 23, 2014, Québec, Canada.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2014). Experimental and analytical studies of strengthening using drilled-in bonded shear reinforcement. Dans : 15th International Conference Sructural Faults & Repair-2014 , 8th – 10th July 2014, Edinburgh, Scotland.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2017). Methods for shear strengthening of thick concrete slabs. Journal of Performance of Constructed Facilities, 31, (3), p. 1-10.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2012). Post-installed shear reinforcement for concrete thick slabs. Dans : 9th fib International PhD Symposium in Civil Engineering , July 22 to 25, 2012, Karlsruhe, Germany.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2023). Shear design of RC members strengthened with steel reinforcing bars embedded through section. Engineering Structures, 285, e116050.

Fiset Mathieu, Bastien Josée, Mitchell Denis et Jolin Marc. (2012). Renforcement en cisaillement des dalles épaisses en béton armé : étude expérimentale et numérique. Dans : Treizième édition des Journées scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton (RF)²B , 5-6 juillet 2012, Lyon, France.

Fiset Mathieu, Bédard Frédéric, Bastien Josée et Mitchell Denis. (2018). Thick concrete slab bridges : study of shear strengthening. Dans : 10th International Conference on Short and Medium Span Bridges , July 31 – August 3, 2018, Quebec, Canada.

Fiset Mathieu, Parenteau Alexandra, Bilodeau Sébastien, Bastien Josée et Mitchell Denis. (2016). Behaviour of thick concrete members with unbonded transverse reinforcement. Dans : 11th fib International PhD Symposium in Civil Engineering , Aug 29 to 31, 2016, Tokyo, Japan.

Fiset Mathieu, Villemure Félix-Antoine, Bastien Josée et Mitchell Denis. (2020). Behavior of Post-Installed Bonded Bars as Shear Reinforcement. ACI Structural Journal, 117, (4), p. 159-168.

Fiset Mathieu, Villemure Félix-Antoine, Bastien Josée, Mitchell Denis et Fournier Benoît. (2013). Effet de l'endommagement sur la résistance au cisaillement des dalles épaisses en béton armé et méthodes de renforcement. Dans : Quatorzième édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)²B , 22-23 août 2013, Sherbrooke, Québec, Canada.

Fleury A., Ranjan R., Shah L., St-Georges Lyne, Rahem Ahmed et Walbridge S.. (2019). Fatigue design of friction stir welded joints in aluminium bridge decks. Dans : CSCE Annual Conference , June 12 - 15, 2019, Laval, Québec.

Fleury Anthony. (2020). Conception en fatigue de joints soudés par friction malaxage dans les tabliers de pont en aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Fleury Anthony, Ranjan R., Shah L. H., St-Georges Lyne, Rahem Ahmed, Walbridge S. et Gerlich A.. (2023). Fatigue performance of thick 6061-T6 aluminum friction stir welded joints with misalignment or channel defects. Welding in the World, 67, (3), p. 707-720.

Fleury Anthony, St-Georges Lyne et Rahem Ahmed. (2018). Effect of welding equipment rigidity on mechanical and physical properties of friction stir welded aluminum 6061-T6. Dans : 12th International Symposium on Friction Stir Welding , 26-28 June 2018, Saguenay, Québec.

Fofana Issouf. (2021). The Gassing of Insulating Fluids. Dans : 2021 International Conference on Electrical Materials and Power Equipment (ICEMPE) , 11-15 April 2021, Chongqing, China.

Fofana Issouf, Sabau John et Bétié Amidou. (2015). Measurement of the relative free radical content of insulating oils of petroleum origin. Energies, 8, (8), p. 7690-7702.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2013). The ice repellency of plasma polymerized HMDSO coatings. Applied Surface Science, 284, p. 459-463.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2018). Robust icephobic, and anticorrosive plasma polymer coating. Cold Regions Science and Technology, 151, p. 89-93.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2011). Superhydrophobic Surface Elaboration Using Plasma Polymerization of Hexamethyldisiloxane (HMDSO). Advanced Materials Research, 409, p. 783-787.

Fortier Martin. (2000). Les effets de la rugosité de surface du moule sur a microstructure et la résistance à la déchirure à chaud pour un alliage A1 - 4.5%p/p Cu. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Fortin Guy. (2003). Simulation de l'accrétion de glace sur un obstacle bidimensionnel par la méthode des bissectrices et par la modélisation des ruisselets et des gouttes de surface. Thèse de doctorat, Université du Québec à Chicoutimi.

Fortin Ken. (2008). Influence du titane sur la réaction interfaciale et la fluidité du composite à matrice métallique Al-B4C. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Fortin Guy, Adomou Maryelle et Perron Jean. (2011). Experimental study of hybrid anti-icing systems combining thermoelectric and hydrophobic coatings. SAE Technical Papers, 380003,

Fortin Guy, Beisswenger Arlene et Perron Jean. Centrifuge adhesion test to evaluate icephobic coatings. Dans : AIAA Atmospheric and Space Environments Conference , 2-5 August 2010, Toronto, Ontario.

Fortin Guy, Enneji Ilham, Beisswenger Arlene et Perron Jean. (2011). Experimental study of snow precipitation over a generic deicing fluid without fluid flow. SAE Technical Papers, 380045,

Fortin Guy, Ilinca Adrian et Laforte Jean-Louis. (2004). Modèle d'accrétion de glace sur un objet bidimensionnel fixe appliquable aux pales d'éoliennes. VertigO, 5, (1),

Fortin Guy, Ilinca Adrian, Laforte Jean-Louis et Brandi Vincenzo. (2004). New roughness computation method and geometric accretion model for airfoil icing. Journal of Aircraft, 41, (1), p. 119-127.

Fortin Guy, Mayer Christine et Perron Jean. (2008). Icing wind tunnel study of a wind turbine blade deicing system : simulation of deicing wind turbine blades with controlled electro-thermal systems. SEA Technology, 49, (9), p. 41-44.

Fortin Guy et Perron Jean. (2012). Ice adhesion models to predict shear stress at shedding. Journal of Adhesion Science and Technology, 26, (4-5), p. 523-553.

Fortin Guy et Perron Jean. Spinning Rotor Blade tests in icing wind tunnel. Dans : 1st AIAA Atmospheric and Space Environments Conference , 22 - 25 June 2009, San Antonio, Texas.

Fortin Guy et Perron Jean. Temperature drop of a wet wing at takeoff. Dans : 43rd AIAA Aerospace Sciences Meeting and Exhibit , 10-13 January, 2005, Reno, Nevada.

Fortin Guy et Perron Jean. Wind turbine icing and de-icing. Dans : 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition , 6-7 january, 2009, Orlando, Florida.

Fortin Guy, Perron Jean et Ilinca Adrian. Behaviour and modeling of cup anemometers under icing conditions. Dans : IWAIS XI : International workshop on atmospheric icing of structures , June 2005, Montreal, Québec.

Fortin Guy, Perron Jean et Ilinca Adrian. Étude des événements de givrage à Murdochville : conclusions pour l'industrie éolienne. Dans : Colloque international Énergie éolienne et sites éloignés , 19-21 Octobre 2005, Îles de la Madeleine.

Fortin Guy, Perron Jean, Mingione Guiseppe et Luliano Emiliano. CIRAAMIL ice accretion code improvement. Dans : 1st AIAA Atmospheric and Space Environments Conference , 22-25 June 2009, San Antonio, Texas.

Fotso Talla Aimé Sylvain. (2016). Elaboration and characterization of PET-Hemp fiber composites for thermoforming applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Fotso Talla Aimé Sylvain, Erchiqui Fouad, Godard F. et Kocaefe Duygu. (2016). An evaluation of the thermal degradation kinetics of novel melt processed PET–hemp fiber composites. Journal of Thermal Analysis and Calorimetry, 126, p. 1387-1396.

Fraser Kirk A.. (2017). Robust and efficient meshfree solid thermo-mechanics simulation of friction stir welding. Thèse de doctorat, Université du Québec à Chicoutimi.

Fraser Kirk A., St-Georges Lyne et Kiss László. (2014). Optimization of friction stir welding tool advance speed via Monte-Carlo simulation of the friction stir welding process. Materials, 7, p. 3435-3452.

G

Gagné Stéphane. (2005). Effets de l'augmentation de la teneur en titane sur l'affinage des grains de l'alliage A356.2. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gagnon Alexandre. (2011). Facteurs influençant la consommation anodique. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gagnon Dominique. (2005). Effets des paramètres métallurgiques sur la microstructure, la macrostructure et la performance des alliages 319, 356 et 413. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gagnon David, Brassard Jean-Denis, Ezzaidi Hassan et Volat Christophe. (2020). Computer-assisted aircraft anti-icing fluids endurance time determination. Aerospace, 7, (4), p. 39-53.

Garza Elizondo Guillermo Hernan. (2010). Machinability of Al-(7-11%)Si casting alloys : role of free-cutting elements. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Garza Elizondo Guillermo Hernan. (2016). Effect of Ni, Mn, Zr and Sc additions on the performance of Al-Si-Cu-Mg alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Gauthier Jean. (1994). Effet du traitement thermique sur les propriétés mécaniques, la microstructure et la fractographie pour l'alliage Al-Si-Cu-Mg. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gauthier Pascal. (2010). Corrosion behaviour study of the forged AA6082 aluminum alloy from different feedstock. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gauthier-Turcotte Étienne, Ménard Sylvain et Fiset Mathieu. (2022). Strength and Behavior of Spruce Pine Glulam Timber Moment Connections Using Glued-In Steel Rods. Journal of Structural Engineering, 148, (12),

Gauthier-Turcotte Étienne, Ménard Sylvain, Fiset Mathieu et Chang Wen-Shao. (2021). Pull-out strength of glued-in steel rod perpendicular to the grain in spruce-pine glulam timber. Dans : World Conference on Timber Engineering 2021, WCTE 2021 , 9 August 2021 through 12 August 2021, Santiago.

Gerzhova Nataliia, Dagenais Christian, Ménard Sylvain, Blanchet Pierre et Côté Jean. (2022). A Parametric Study of Fire Risks of Green Roofs to Adjacent Buildings. Fire, 5, (4), e93.

Ghalkhani Maryam. (2012). Contribution to the improvement of the dissolved gas analysis techniques. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ghalmi Zahira. (2013). Contribution à l'étude des mécanismes de l'adhésion de la glace à différents matériaux et application à l'évaluation des matériaux glaciophobes. Thèse de doctorat, Université du Québec à Chicoutimi.

Gheribi Aïmen E., Poncsák Sándor, Kiss Làszlò, Guérard Sébastien, Bilodeau Jean-François et Chartrand Patrice. (2017). Experimental determination of the thermal diffusivity of α-Cryolite up to 810 K and comparison with first principles predictions. ACS Omega, 2, (5), p. 2224-2230.

Ghunem Refat Atef, Cherney Edward A., Farzaneh Masoud, Momen Gelareh, Illias Hazlee Azil, Mier Malagon Gustavo Arturo, Peesapati Vidyadhar et Yin Fanghui. (2022). Development and application of superhydrophobic outdoor insulation: A review. IEEE Transactions on Dielectrics and Electrical Insulation, 29, (4), p. 1392-1399.

Gillenwater Daniel, Masson Christian et Perron Jean. Wind turbine performance during icing events. Dans : 46th AIAA Aerospace Sciences Meeting & Exhibit , 7-10 January 2008, Reno, Nevada.

Girard Pierre-Luc, Marceau Daniel, Kocaefe Duygu, Bouazara Mohamed, Kallel Walid et Coulombe Patrick. Numerical investigation of the load free permanent strain in carbon anode during baking process. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Girard Sébastien, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Experimental exploration of the aluminum tube drawing process for producing variable wall thickness components used in light structural applications. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Girgis Abram. (2018). Parameters controlling the ambient and elevated temperature tensile properties of Al-Cu and Al-Si cast alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Glidden Pierre-Yves. (2022). Estimation de l’accumulation de métal dans un four à arc électrique. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Goharshenas Moghadam Saba, Momen Gelareh, Bakhshandeh Ehsan et Jafari Reza. (2024). To be or not to be a hydrophobic matrix? the role of coating hydrophobicity on anti-icing behavior and ions mobility of ionic liquids. Chemical Engineering Journal, 485, e149696.

Golbahar Behnam. (2008). Effect of grain refiner-modifier interaction on the performance of A356.2 alloy. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gonçalves Andrade Alexandre. (2023). Développement d’un thermogénérateur pour la récupération de chaleur des industries de bouletage du minerai de fer dans un contexte d’opérationnalisation du développement durable. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Gosselin-Brisson Samuel. (2006). Étude d'un système de contrôle pour suspension automobile. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Goulet Patrice, Laberge Carl, Lacroix René, Kiss László et Perron Jean. Modeling of the coke bed used in the electrical preheat of an aluminum reduction cell. Dans : Light Metals 2003: Proceedings of the technical sessions presented by the TMS Aluminium Committee at the 132nd TMS Annual Meetings , 2-6 March 2003, San Diego, CA.

Grenon Éric. (2006). Développement d'une méthode de mesure des composantes de vitesse d'un écoulement de liqueur Bayer. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Guérin Frédéric. (2014). Modélisation de l'adhérence de la glace atmosphérique sur divers substrats. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Guérin Frédéric, Laforte Caroline, Farinas Marie-Isabelle et Perron Jean. (2016). Analytical model based on experimental data of centrifuge ice adhesion tests with different substrates. Cold Regions Science and Technology, 121, p. 93-99.

Guo Jun Feng. (2007). Use of the ultrasonic technique in measuring inclusions in Al-Si alloy melts. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Guo Zhanying, Zhao Gang et Chen X-Grant. (2016). Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing. Materials Characterization, 114, p. 79-87.

Guo Zhanying, Zhao Gang et Chen X-Grant. (2015). Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy. Materials Characterization, 102, p. 122-130.

H

Habibi Nasser. (2002). Evaluation of inclusions and oxides in the Al-SI alloys using prefil technique. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Habibi Mohamed. (2016). Développement et caractérisation de nouveaux composites hybrides UD lin/papier et UD lin/mat lin. Thèse de doctorat, Université du Québec à Chicoutimi.

Hadjadj Yazid, Fofana Issouf, van de Voort F. R. et Bussières Denis. (2016). Potential of determining moisture content in mineral insulating oil by fourier transform infrared spectroscopy. IEEE Electrical Insulation Magazine, 32, (1), p. 34-39.

Hadjadj Yazid, Meghnefi Fethi, Fofana Issouf et Ezzaidi Hassan. (2013). On the feasibility of using poles computed from Frequency Domain Spectroscopy to assess oil impregnated paper insulation conditions. Energies, 6, (4), p. 2204-2220.

Hajji Chaima. (2023). Effect of grain refiners on the refining performance in aluminum wrought AA6111 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Hamani Ibrahime. (2016). Modélisation de l’étape de chauffage infrarouge des biocomposites de type PET-Chanvre en thermoformage. Thèse de doctorat, Université du Québec à Chicoutimi.

Hamed Marwan. (2019). Milling parameters for Al-Cu and Al-Si cast alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Han Yumei. (2007). Phénomène de fusion locale des phases du cuivre dans les alliages Al-Si-Cu-Mg. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Han Yumei. (2012). Corrosion des composites à matrice metallique du type Al-B4C dans les solutions aqueuses. Thèse de doctorat, Université du Québec à Chicoutimi.

Han Yu-Mei et Chen X-Grant. (2015). Electrochemical behavior of Al-B₄C metal matrix composites in NaCl solution. Materials, 8, (9), p. 6455-6470.

Harvey Derek. (2012). Modélisation numérique et validation expérimentale d'un système de protection contre le givre par éléments piézoélectriques. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Hashjin Ra'na Rafiei, Ranjbar Zahra, Yari Hossein et Momen Gelareh. (2022). Tuning up sol-gel process to achieve highly durable superhydrophobic coating. Surfaces and Interfaces, 33, e102282.

He Zhihai. (1995). Évaluation des temps de protection de produits antigivrants dans différentes conditions climatiques. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Hedir Abdallah, Lamrous Omar, Fofana Issouf, Slimani Ferhat et Moudoud Mustapha. (2021). Critical issues in XLPE-based polymer nanocomposites and their blends. Dans Jince Thomas, Sabu Thomas et Zakiha Ahmad (dir.), Crosslinkable polyethylene based blends and nanocomposites. (p. 63-83). Materials Horizons: From Nature to Nanomaterials book series (MHFNN). Singapore : Springer.

Hedir Abdallah, Slimani Ferhat, Moudoud Mustapha, Omar Lamrous, Durmus Ali et Fofana Issouf. (2022). Effects of electrical aging on the structural and physicochemical properties of crosslinked polyethylene (XLPE) cable insulation material. Engineering Research Express,

Heidarzadeh Akbar, Javidani Mousa, Mofarrehi Mohammadreza, Farzaneh Amir et Chen X-Grant. (2021). Submerged dissimilar friction stir welding of AA6061 and AA7075 aluminum alloys: microstructure characterization and mechanical property. Metals, 11, (10), e1592.

Heidarzadeh Akbar, Javidani Mousa, Mofarrehi Mohammadreza, Motalleb-nejad Pouyan, Mohammadzadeh Roghayeh, Jafarian Hamidreza et Chen X-Grant. (2023). Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials, 16, (3), e944.

Heidarzadeh Akbar, Khorshidi Mahsa, Mohammadzadeh Roghayeh, Khajeh Rasoul, Mofarrehi Mohammadreza, Javidani Mousa et Chen X-Grant. (2023). Multipass friction stir processing of laser-powder bed fusion AlSi10Mg: microstructure and mechanical properties. Materials, 16, e1559.

Hermosilla-Lara Guillaume, Hassouni Khaled, Marty Philippe et Momen Gelareh. (2005). Experimental and numerical study of the hydrogen's storage by adsorption on activated carbon. Dans : IHEC International Hydrogen Energy Congress & Exhibition, 2005 , July, 13-15, 2005, Istambul, Turkey.

Hermosilla-Lara Guillaume, Momen Gelareh, Marty Philippe, Le Neindre B. et Hassouni Khaled. (2007). Hydrogen storage by adsorption on activated carbon: Investigation of the thermal effects during the charging process. International Journal of Hydrogen Energy, 32, (10-11), p. 1542-1553.

Hermosilla-Lara Guillaume, Momen Gelareh, Marty Philippe, Leneindre B. et Hassouni Khaled. (2005). Hydrogen storage by adsorption on activated carbon: experimental and numerical study. Dans J. L. G. Fierro et M. A. Peña (dir.), Proceedings of the 2nd European Hydrogen Energy Conference, Zaragoza (Spain) Nov 22-25, 2005. (p. 213-214). Amsterdam : Elsevier.

Hernandez Sandoval Jacobo. (2010). Improving the performance of 354 type alloy. Thèse de doctorat, Université du Québec à Chicoutimi.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi et Chen X-Grant. (2019). Evaluation of the growth kinetics of θ′ and θ-Al2Cu precipitates in a binary Al-3.5 Wt Pct Cu alloy. Metallurgical and Materials Transactions A, 50, (7), p. 3048-3060.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi, Chen X-Grant et Massinon Denis. (2022). Modelling of strain-controlled thermomechanical fatigue testing of cast AlSi7Cu3.5Mg0.15 (Mn, Zr, V) alloy for different aging conditions. Metals, 12, e1258.

Heugue Pierre, Larouche Daniel, Breton Francis, Massinon Denis, Martinez Rémi et Chen X-Grant. (2019). Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu3.5Mg0.15 cast alloy with Zr and V additions. Metals, 9, (7), e777.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2021). Fabrication of icephobic slippery surfaces bioinspired by Nepenth Pitcher Plant. Dans : 36th International Conference of the Polymer Processing Society , September 26-29, 2021, Montréal, Canada.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2023). Icephobic behavior of a slippery coating containing nanoporous particles as lubricant-loaded carriers. Surfaces and Interfaces, 41, e103306.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2021). Recent progress in the anti-icing performance of slippery liquid-infused surfaces. Progress in Organic Coatings, 151, e106096.

Heydarian Samaneh, Maghsoudi Khosrow, Jafari Reza, Gauthier Hellene et Momen Gelareh. (2022). Fabrication of liquid-infused textured surfaces (LITS): The effect of surface textures on anti-icing properties and durability. Materials Today Communications, 32, e103935.

Heydarian Samaneh, Momen Gelareh et Jafari Reza. (2023). Icephobicity and electrical assessment of slippery coating impregnated with a stabilized hydroxyl-terminated lubricant for high voltage insulation application. Journal of Materials Science, 58, (22), p. 9264-9281.

Hidouri Slah. (2022). Élaboration de surfaces antibactériennes à base de revêtement non-mouillable contenant un agent bactéricide. Thèse de doctorat, Université du Québec à Chicoutimi.

Hidouri Slah, Jafari Reza, Fournier Claire, Girard Catherine et Momen Gelareh. (2022). Formulation of nanohybrid coating based on essential oil and fluoroalkyl silane for antibacterial superhydrophobic surfaces. Applied Surface Science Advances, 9, e100252.

Hidouri Slah, Jafari Reza et Momen Gelareh. (2024). Development of a polydimethylsiloxane–Eucalyptus essential oil antibacterial coating. Journal of Coatings Technology and Research, 21, (2), p. 747-760.

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. Icing simulation of wind-turbine blades. Dans : 45th AIAA Aerospace Sciences Meeting and Exhibit , 8-11 January 2007, Reno, Nevada.

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. (2008). Wind turbine performance under icing conditions. Wind Energy, 11, (4), p. 319-333.

Hu Peng. (2023). Elevated-temperature mechanical, creep and fatigue behavior of aluminum-copper cast aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Hu Peng, Liu Kun, Pan Lei et Chen X-Grant. (2022). Effect of Mg microalloying on elevated-temperature creep resistance of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 851, e143649.

Hu Peng, Liu Kun, Pan Lei et Chen X-Grant. (2023). Effects of individual and combined additions of transition elements (Zr, Ti and V) on the microstructure stability and elevated-temperature properties of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 867, e144718.

Huang Ying. (2012). Protection of metal and alloy surfaces using corrosion resistance nanostructured superhydrophobic coatings. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Huang Xianai. (2012). Study on the degradation mechanism of heat-treated wood by UV light. Thèse de doctorat, Université du Québec à Chicoutimi.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Morphological and microstructural characterization of bio-coke as potential anode raw material for aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Characterization of carbon anode materials by image analysis. Light Metals, p. 859-864.

Huang Xianai, Kocaefe Duygu, Boluk Yaman, Kocaefe Yasar S. et Pichette André. (2012). Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids. European Journal of Wood and Wood Products, 70, (5), p. 711-717.

Huang Xianai, Kocaefe Duygu, Boluk Yaman et Krause Cornelia. (2013). Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weathering. Applied Surface Science, 264, p. 117-127.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as a raw material for carbon anode production. Energy Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as raw material for carbon anode production. Energy and Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Interaction of bio-coke with different coal tar pitches. Fuel, 179, p. 179-192.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Wettability of bio-coke by coal tar pitch for its use in carbon anodes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 490, p. 133-144.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Changes in wettability of heat-treated wood due to artificial weathering. Wood Science and Technology, 46, (6), p. 1215-1237.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). A spectrocolorimetric and chemical study on color modification of heat-treated wood during artificial weathering. Applied Surface Science, 258, (14), p. 5360-5369.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Study of the degradation behavior of heat-treated jack pine (Pinus banksiana) under artificial sunlight irradiation. Polymer Degradation and Stability, 97, (7), p. 1197-1214.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Pichette André. (2018). Combined effect of acetylation and heat treatment on the physical, mechanical and biological behavior of jack pine (Pinus banksiana) wood. European Journal of Wood and Wood Products, 76, (2), p. 525-540.

Huang Xianai, Kocaefe Duygu, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Coulombe Patrick. (2016). Investigation on the structure of carbonized pitch and calcined coke-carbonized pitch interface in carbon anodes by etching. Journal of Materials Research, 31, (22), p. 3513-3521.

Huang Ying. (2016). Corrosion resistant superhydrophobic nanoparticles-incorporated-anodized-aluminum alloys surfaces. Thèse de doctorat, Université du Québec à Chicoutimi.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2016). Fabrication of corrosion resistance micro-nanostructured superhydrophobic anodized aluminum in a one-step electrodeposition process. Metals, 6, (3), p. 47.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2011). Fabrication of Superhydrophobic Surfaces on Aluminum Alloy Via Electrodeposition of Copper Followed by Electrochemical Modification. Nano-Micro Letters, 3, (3), p. 160-165.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2010). A one-step process to engineer superhydrophobic copper surfaces. Materials Letters, 64, (24), p. 2722-2724.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied Surface Science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied surface science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process. Applied Surface Science, 237, p. 327-334.

Huang Ying, Sarkar Dilip K., Gallant Danick et Chen X-Grant. (2013). Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process. Applied Surface Science, 282, p. 689-694.

I

Ibrahim Mohamed Fawzy. (2010). Effets du magnésium et des conditions de vieillissement sur la résilience des alliages Al-Si-Cu-Mg de type 319. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ibrahim Ahmed. (2017). On the effects of ambient temperature and high temperature on the performance of Al-Cu and Al-Si-Cu alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ibrahim Hussein, Dimitrova Mariya Hristova, Dutil Yvan, Rousse Daniel, Ilinca Adrian et Perron Jean. Wind-diesel hybrid system : energy storage system selection method. Dans : The 12th International Conference on Energy Storage - InnoStock 2012 , 16-18 May 2012, Espagne.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Feasibility study of a wind-diesel compressed air power plant. Dans : AWEA Windpower 2011 Conference & Exhibition , May 22-25 2011, Anaheim, CA.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2009). A hybrid wind-diesel-compressed air system for remote telecom infrastructures = Système hybride éolien-diesel avec stockage d'air comprimé pour l'électrification d'une station de télécommunications isolée. European Journal of Electrical Engineering, 12, (5-6), p. 701-731.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Investigation of electricity production with a wind-diesel-compressed air energy storage system for Nordic remote villages. Dans : 2nd International Conference on Energy Conversion and Conservation - CICME'10 , April 22-25, 2010, Hammamet, Tunisia.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Optimisation de l'efficacité du moteur diesel pour un système hybride éolien-diesel : validation expérimentale. Dans : CSME FORUM 2010 - Proceedings of The Canadian Society for Mechanical Engineering Forum 2010 , June 7-9, 2010, Victoria, Colombie-britannique.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Étude et conception d'un système hybride éolien-diesel-air comprimé pour l'électrification d'une station de télécommunications isolée. Dans : CanWEA 2010 Conference and Exhibition , 1-3 novembre, 2010, Montreal, Quebec.

Ibrahim Hussein, Dimitrova Mariya Hristova, Rousse Daniel, Ilinca Adrian et Perron Jean. Générateur éolien-diesel avec stockage d'énergie : critères de choix du système de stockage. Dans : Xe Colloque interuniversitaire franco-québécois sur la Thermique des systèmes , 20 au 22 juin 2011, Saguenay, Québec.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Comparison and analysis of different energy storage techniques based on their performance index. Dans : 2007 IEEE Canada Electrical Power Conference, EPC 2007 , 25-26 October 2007, Montreal, Quebec.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Energy storage systems : characteristics and comparisons. Renewable and Sustainable Energy Reviews, 12, (5), p. 1221-1250.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Integration of wind turbines with compressed air energy storage in remote area power supply system. Dans : European Wind Energy Conference & Exhibition 2012 (EWEC 2012) , 16-19 March 2012, Copenhagen, Denmark.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Investigation des différentes alternatives renouvelables et hybrides pour l'électrification des sites isolés : rapport interne. Université du Québec à Rimouski, Laboratoire de recherche en énergie éolienne, Université du Québec à Chicoutimi, Laboratoire international des matériaux antigivre.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Investigation on the performances of energy storage techniques. Dans : 21st Canadian Congress of Applied Mechanics : proceedings, 21 CANCAM 2007, Department of Mechanical & Industrial Engineering , 2007, June 3-7, Ryerson University, Toronto, Ontario.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Moteur diesel suralimenté : bases et calculs, cycles réel, théorique et thermodynamique : rapport interne. Université du Québec à Rimouski - Laboratoire de recherche en énergie éolienne LREE, Université du Québec à Chicoutimi - Laboratoire international des matériaux antigivre LIMA.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Solutions actuelles pour une meilleure gestion et intégration de la ressource éolienne. Dans : CSME/SCGM Forum 2008 - The Canadian society for mechanical engineering , 5-8 juin, 2008, Ottawa, Canada.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Solutions de stockage de l'énergie éolienne : rapport interne. UQAR - Laboratoire de recherche groupe éolien LRGE.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Systèmes de stockage de l'énergie pour les éoliennes = Wind turbine storage systems. Dans : Colloque international Énergie éolienne et sites éloignés , 19-21 octobre 2005, les de la Madeleine, Québec.

Ibrahim Hussein, Ilinca Adrian, Perron Jean et Merabet Adel. Modeling and simulation of a novel small-scale compressed air hybrid system for stand-alone off-grid applications. Dans : 2013 IEEE Electrical Power and Energy Conference, EPEC 2013 : Innovative Leadership for Renewable Energy , August 21-23, 2013, Marriott Harbourfront Hotel, Halifax, Nova Scotia.

Ibrahim Hussein, Ilinca Adrian, Rousse Daniel, Dutil Yvan et Perron Jean. Analyse des systèmes de génération d’électricité pour les sites isolés basés sur l’utilisation du stockage d’air comprimé en hybridation avec un jumelage éolien-diesel. Dans : CONFREGE 2012 - Conférence francophone sur l'éco-conception en génie électrique , 28-30 Mai 2012, Montréal, Québec.

Ibrahim Hussein, Ilinca Adrian, Younès Rafic, Perron Jean et Basbous Tammam. Study of a hybrid wind-diesel system with compressed air energy storage. Dans : IEEE Canada Electrical Power Conference, 2007 : EPC 2007 , 25 - 26 October 2007, Montreal, Quebec.

Ibrahim Hussein, Sing Ramdenee Drishty, Rousse Daniel, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. Générateur éolien-diesel avec stockage d'air comprimé : aspects thermiques. Dans : Xe Colloque interuniversitaire franco-québécois sur la Thermique des systèmes , 20 au 22 juin 2011, Saguenay, Québec.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. (2010). Study and design of a hybrid wind-diesel-compressed air energy storage system for remote areas. Applied Energy, 87, (5), p. 1749-1762.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian et Perron Jean. (2007). Investigation des générateurs hybrides d'électricité de type éolien-air comprimé. Revue des énergies renouvelables, p. 47-50.

Ibrahim Mohamed Fawzy. (2015). Effects of Be, Sr, Fe and Mg interactions on the microstructure and mechanical properties of aluminum based aeronautical alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

J

Jafari Reza, Arefi-Khonsari F., Tatoulian M., Le Clerre D., Talini L. et Richard F.. (2009). Development of oligonucleotide microarray from plasma polymerized acrylic acid. Thin Solid Films, 517, (19), p. 5763-5768.

Jafari Reza, Asadollahi Siavash et Farzaneh Masoud. (2013). Applications of plasma technology in development of superhydrophobic surfaces: a review. Plasma Chemistry and Plasma Processing, 33, (1), p. 177-200.

Jafari Reza, Chameau Marc, Farzaneh Masoud et Momen Gelareh. (2018). Superhydrophobic and highly oleophilic polystyrene fibers (PS) with delayed freezing time and effective oil adsorption.

Jafari Reza, Chameau Marc, Farzaneh Masoud et Momen Gelareh. (2018). Superhydrophobic and highly oleophilic polystyrene fibers (PS) with delayed freezing time and effective oil adsorption. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, ). Switzerland : Materials Science Forum.

Jafari Reza, Cloutier Come, Allahdini Anahaita et Momen Gelareh. (2019). Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces. The International Journal of Advanced Manufacturing Technology, 103, p. 1225-1238.

Jafari Reza et Farzaneh Masoud. (2013). Development a simple method to create the superhydrophobic composite coatings. Journal of Composite Materials, 47, (25), p. 3125-3129.

Jafari Reza et Farzaneh Masoud. (2011). Fabrication of superhydrophobic nanostructured surface on aluminum alloy. Applied Physics A. Materials Science & Processing, 102, (1), p. 195-199.

Jafari Reza et Farzaneh Masoud. (2012). A simple method to create superhydrophobic aluminium surfaces. Materials science forum, 706-09, p. 2874-2879.

Jafari Reza, Farzaneh Masoud et Menini Richard. (2010). Superhydrophobic and icephobic surfaces prepared by RF-sputtered polytetrafluoroethylene coatings. Applied surface science, 257, (5), p. 1540-1543.

Jafari Reza, Foroughi Mobarakeh Landan et Farzaneh Masoud. (2012). Water-Repellency Enhancement of Nanostructured Plasma-Polymerized HMDSO Coatings Using Grey-Based Taguchi Method. Nanoscience and Nanotechnology Letters, 4, (3), p. 369-374.

Jafari Reza, Momen Gelareh et Eslami Esmaeil. (2018). Fabrication of icephobic aluminium surfaces by atmospheric plasma jet polymerisation. Surface Engineering, 35, (5), p. 450-455.

Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2016). Durability enhancement of icephobic fluoropolymer film. Journal of Coatings Technology and Research, 13, (3), p. 405-412.

Jafari Reza, Tatoulian M. et Arefi-Khonsari F.. (2011). Improvement of the stability of plasma polymerized acrylic acid coating deposited on PS beads in a fluidized bed reactor. Reactive and Functional Polymers, 71, (4), p. 520-524.

Jafari Reza, Tatoulian M., Morscheidt W. et Arefi-Khonsari F.. (2006). Stable Polymerized Acrylic Acid coating deposited on Polyethylene (PE) films in a low frequency discharge. Reactive and Functional Polymers, 66, (12), p. 1757-1765.

Jain Pankaj. (1996). Étude du transfert de chaleur convectif dans un four circulaire. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Jann Jessica, Drevelle Olivier, Chen X-Grant, Auclair-Gilbert Myriam, Soucy Gervais, Faucheux Nathalie et Fortier Louis-Charles. (2021). Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria. RSC Advances, 11, (60), p. 38172-38188.

Javidani Mousa. (2015). Effect of Cu, Mg and Fe on solidification processing and microstructure evolution of Al-7Si based foundry alloys. Thèse de doctorat, Université Laval.

Javidani Mousa, Arreguin-Zavala J., Danovitch J., Tian Y. et Brochu M.. (2017). Additive manufacturing of AlSi10Mg alloy using direct energy deposition: microstructure and hardness characterization. Journal of Thermal Spray Technology, 26, (4), p. 587-597.

Javidani Mousa, Fortier Martin et Colbert Josée. (2019). Impact of the main casting process parameters on floating crystals in Al alloy DC-Cast ingots. Dans : Light Metals 2019 TMS Annual Meeting & Exhibition , March 10-14, 2019, San Antonio, Texas.

Javidani Mousa et Larouche Daniel. (2014). Application of cast Al–Si alloys in internal combustion engine components. International Materials Reviews, 59, (3), p. 132-158.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Jayasree T., Ungarala Mohan Rao, Fofana Issouf, Brettschneider Stephan, Rodriguez-Celis Esperanza et Picher Patrick. (2021). Pre-breakdown Phenomena and Influence of Aging Byproducts in Thermally Aged Low Pour Point Ester Fluids Under AC Stress. IEEE Transactions on Dielectrics and Electrical Insulation, 28, (5), p. 1563-1570.

Jeddi Ebrahim. (2012). Numerical study of anodic voltage drop in the Hall-Héroult cells by finite element method = Étude numérique de la chute de voltage anodique dans les cuves Hall-Héroult par la méthode des éléments finis. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Jin L., Liu Kun et Chen X-Grant. (2020). Improved elevated temperature properties in Al-13%Si piston alloys by Mo addition. Journal of Materials Engineering and Performance, 29, (1), p. 126-134.

Jin Lanfeng. (2019). Development of Al–Si cast alloys for elevated-temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2020). Evolution of dispersoids and their effects on elevated-temperature strength and creep resistance in Al-Si-Cu 319 cast alloys with Mn and Mo additions. Materials Science and Engineering: A, 770, p. 138554.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2019). Evolution of Fe-Rich intermetallics in Al-Si-Cu 319 cast alloy with various Fe, Mo, and Mn contents. Metallurgical and Materials Transactions B, 50, (4), p. 1896-1907.

K

Kallel Walid. (2018). Étude expérimentale du comportement thermo-chimio-mécanique des anodes de carbone en phase de cuisson. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Kallel Walid, Marceau Daniel, Kocaefe Duygu, Girard Pierre-Luc, Racine Dany et Coulombe Patrick. Evolution of mechanical properties of carbon anodes during baking. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Kamguo Kamga Honoré. (2010). Influence of alloying elements iron and silicon on mechanical properties of aluminum-copper type B206 alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Hot tearing of aluminum-copper B206 alloys with iron and silicon additions. Materials Science and Engineering A : Structural Materials: Properties, Microstructure and Processing, 527, (27-28), p. 7413-7423.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2012). Mechanical properties of aluminium-copper B206 alloys with iron and silicon additions. International Journal of Cast Metals Research, 25, (1), p. 15-25.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Solidification of aluminum-copper B206 alloys with iron and silicon additions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, (11), p. 2844-2855.

Kassi Koutoua Simon, Fofana Issouf, Megnefhi Fethi, Bétié Amidou, Yéo Zié et Perron Jean. (2014). Comparative study between conventional and hybrid solid insulation systems. Dans : 2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2014 , 19-22 October 2014, Des Moines, IA.

Kaszas Csilla, Kiss László, Poncsák Sándor, Guérard Sébastien, Alarie Jonathan et Roger Thomas. (2020). Flotation of alumina on the surface of the electrolyte in an aluminum electrolysis cell. Metallurgical and Materials Transactions B, 51, p. 1824-1835.

Keshavarzi Samaneh, Bouazara Bassem, Momen Gelareh et Jafari Reza. (2023). Hydrophobicity and icephobicity of micropillared silicone rubber surfaces fabricated by compression molding. Results in Surfaces and Interfaces, 12, e100132.

Keshavarzi Samaneh, Entezari A., Maghsoudi Khosrow, Momen Gelareh et Jafari Reza. (2022). Ice nucleation on silicone rubber surfaces differing in roughness parameters and wettability: Experimental investigation and machine learning–based predictions. Cold Regions Science and Technology, 203, e103659.

Keshavarzi Samaneh, Sourati Jamshid, Momen Gelareh et Jafari Reza. (2022). Temperature-dependent droplet impact dynamics of a water droplet on hydrophobic and superhydrophobic surfaces: An experimental and predictive machine learning–based study. International Journal of Heat and Mass Transfer, 195, e123190.

Khademsameni Helya, Jafari Reza, Allahdini Anahita et Momen Gelareh. (2024). Regenerative Superhydrophobic Coatings for Enhanced Performance and Durability of High-Voltage Electrical Insulators in Cold Climates. Materials, 17, (7), e1622.

Khadir Lahouari. (2007). Étude du phénomène de résonance des pièces complexes en aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Khalifa Waleed. (2003). Rôle des inclusions dans la germination de la phase a-aluminium des intermétalliques contenant du fer dans le coin riche en alumimium du système ternaire Al-Si-Fe. Thèse de doctorat, Université du Québec à Chicoutimi.

Khangholi Siamak Nikzad, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2022). Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments. Journal of Alloys and Compounds, 914, e165242.

Khangholi Siamak Nikzad, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2022). Review on recent progress in Al–Mg–Si 6xxx conductor alloys. Journal of Materials Research, 37, (3), p. 670-691.

Kilic Saliha Meltem. (2016). Experimental study of the combined calcination and hydrodesulfurization of high-sulfur green petroleum coke. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Method for analyzing an anode and device thereof. .

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Comparison of weathering behavior of heat-treated jack pine during different artificial weathering conditions. Dans : 4th International Conference on Fluid Mechanics and Heat & Mass Transfer (FLUIDSHEAT'13) , June 25-27, 2013, Dubrovnik, Croatia.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Study of the degradation of heat-treated jack pine under different artificial weathering conditions. International Journal of Energy and Environment, 7, (3), p. 97-106.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. Study on the surface changes of heat-treated aspen wood due to aging by different techniques. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Quantitative characterization of chemical degradation of heat-treated wood surfaces during artificial weathering using XPS. Surface and Interface Analysis, 45, (2), p. 639-649.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Study of weathering behavior of jack pine heat-treated under different conditions. Journal of Energy and Power Engineering, 7, p. 818-826.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. Study of weathering behavior of jack pine heat-treated under different conditions. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. Measurement of anode electrical resistivity for quality control in aluminium industry. Dans : 53rd annual Conference of Metallurgists , 28 September -1 October 2014, Vancouver, British Colombia.

Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sanogo Bazoumana, Ahoutou Yao, Sun Hang et Coulombe Patrick. (2017). Development of techniques and tools for the determination of carbon anode quality. Light Metals, p. 1247-1254.

Kocaefe Duygu, Kocaefe Yasar S. et Oumarou Noura. A novel high temperature heat treatment process for wood. Dans : 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 20-23 July 2015, South Africa.

Kocaefe Duygu, Kocaefe Yasar S., Younsi Ramdane, Oumarou Noura et Lekounougou S. Thierry. (2013). Mathematical modelling of the high temperature treatment of birch in a prototype furnace. Advances in Mechanical Engineering, 5,

Kocaefe Duygu et Saha Sudeshna. (2012). Comparison of the protection effectiveness of acrylic polyurethane coatings containing bark extracts on three heat-treated North American wood species: Surface degradation. Applied Surface Science, 258, (13), p. 5283-5290.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. (2013). Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Journal of Energy and Power Engineering, 7, p. 1198-1205.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interaction between coke and pitch in anode manufacturing. Light Metals, p. 1045-1050.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interactions between coke and pitch in anode manufacturing. Dans Barry A. Sadler (dir.), Light Metals 2013. (p. 1045-1050). The Minerals, Meatls & Materials Series. Switzerland AG : Springer, Cham.

Kocaefe Duygu, Sarkar Arunima, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. Utilization of artificial neural network to analyze and predict the influence of different parameters on anode properties. Dans : 11th Australasian Aluminium Smelting Technology Conference , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Duygu, Sarkar Dilip K. et Chen X-Grant. (2012). Effect of Ti addition on the wettability of Al-B4C metal matrix composites. International Journal of materials research, 103, (6), p. 729-736.

Kocaefe Duygu, Xie Yadian, Kocaefe Yasar S., Wei Liu, Zou Shaoling et Wu Anjing. (2013). Thermogravimetric study on devolatilization kinetics of Chinalco anodes during baking. Journal of Materials Science Research, 2, (2), p. 22-34.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. Modelling of high temperature heat treatment of wood using thermowood technology. Dans : 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 19-21 July 2010, Antalya, Turkey.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. (2011). Recipe adaptation and new recipe development for high temperature heat treatment of North American wood species. International Journal of Energy, Environment, and Economics, 19, (3), p. 257-278.

Kocaefe Yasar S., Baiteche Mounir, Oumarou Noura, Kocaefe Duygu et Morais Brigitte. Different mathematical modelling approaches to predict the horizontal anode baking furnace performance. Dans : 11th Australasian Aluminium Smelting Technology , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Yasar S., Kocaefe Duygu et Bhattacharyay Dipankar. (2015). Quality control via electrical resistivity measurement of industrial anodes. Light Metals, p. 1097-1102.

Kocaefe Yasar S., Kocaefe Duygu, Bhattacharyay Dipankar, Benzaoui Abderrahmane et Desmeules Jean-François. (2020). Testing of SERMA technology on industrial anodes for quality control for aluminum production. Light Metals, 2020, p. 1189-1195.

Kocaefe Yasar S., Kocaefe Duygu et Gauthier Bruno. Impact of the form of a trailer on its aerodynamic performance. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Yasar S., Oumarou Noura, Baiteche Mounir, Kocaefe Duygu, Morais Brigitte et Gagnon Marc. (2013). Use of mathematical modelling to study the behavior of a horizontal anode baking furnace. Light Metals, p. 1139-1144.

Kocaefe Yasar S., Oumarou Noura et Kocaefe Duygu. Comparison of the 1D and 3D models for the simulation of wood heat treatment process. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Yasar S., Simard G., Bui Rung-Tien, Charette André, Potocnik Vinko et Perron Jean. Analyzing the heat transfer in a coke calcining kiln. Dans : Light metals 1992 : proceedings of the technical sessions presented by the TMS Light Metals Committee at the 121st TMS annual meeting , March 1-5, 1992, San Diego, California.

Koffi Agbelenko. (2021). Étude des paramètres d'injection des composites de fibres naturelles et de l'amélioration des performances mécaniques du matériau pour l'impression 3D. Thèse de doctorat, Université du Québec à Chicoutimi.

Koffi Thomas, Kassi Koutoua S., Kone Gbah, N'cho Janvier Sylvestre, Edoé Mensah, Bosson Jocelyne, Fofana Issouf et Zoueu Jérémie. (2022). Using structured laser illumination planar imaging (SLIPI) as a new technique to monitor the degradation of biodegradable oils in electrical power transformers. IET Generation, Transmission & Distribution, p. 1-12.

Kone Gbah, Volat Christophe, Hudon Claude et Bernier Simon. (2020). Experimental investigation of the spatial and temporal evolution of the tangential and normal E-Field components along the stress grading system of a real stator bar. Energies, 13, (3), p. 534.

Koont Zafer. (2013). Intéraction entre les particules d'alumines, les alliages d'aluminium et ses inclusions durant la filtration d'aluminium avant la coulée. Thèse de doctorat, Université du Québec à Chicoutimi.

Kumar Virendra, Jolivalt Claude, Pulpytel Jerome, Jafari Reza et Arefi-Khonsari Farzaneh. (2013). Development of silver nanoparticle loaded antibacterial polymer mesh using plasma polymerization process. Journal of Biomedical Materials Research: Part A, 101A, p. 1121-1132.

L

Laberge Carl. (2003). Caractérisation thermoélectrique du lit de coke utilisé lors du préchauffage d'une cuve d'électrolyse de type Hall-Héroult. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Labib Atef. (1993). L'effet des niveaux de refroidissement (température de du moule) et des traitements thermiques sur les propriétés mécaniques et sur la microstructure des deux alliages composites Al-Si-Mg/SiC/10p. Mémoire de maîtrise, Université de Québec à Chicoutimi.

Laforte Caroline. (2001). Étude de l'adhérence de la glace sur des solides à caractère glaciophobe. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Laforte Caroline, Blackburn Caroline et Perron Jean. A review of icephobic coating performances over the last decade. Dans : SAE Technical Paper Series - SAE 2015 International Conference on Icing of Aircraft, Engines, and Structures , June 22-25, 2015, Prague, Czech Republic.

Laforte Caroline, Blackburn Caroline, Perron Jean et Aubert Roger J.. (2014). Icephobic coating evaluation for aerospace applications. Dans : 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference , 13-17 January 2014, National Harbor, Maryland.

Laforte Caroline et Laforte Jean-Louis. (2012). Deicing strains and stresses of iced substrates. Journal of Adhesion Science and Technology, 26, (4-5), p. 603-620.

Laforte Caroline et Tremblay Marc Mario. (2017). Comparative evaluation of the anti-icing protection time of runway deicers using infrared thermography. Cold Regions Science and Technology, 138, p. 57-62.

Laforte Jean-Louis, Allaire M. A. et Laflamme J.. (1998). State-of-the-art on power line de-icing. Atmospheric Research, 46, (1-2), p. 143-158.

Laforte Jean-Louis, Bouchard Gilles et Louchez Patrick R.. (1992). Aircraft take-off laboratory simulation for de/anti-icing study. Canadian Aeronautics and Space Journal, 38, (4), p. 183-193.

Laforte Jean-Louis, Louchez P. R. et Bouchard Gilles. (1993). Experimental evaluation of flat plate boundary layer growth over an anti-icing fluid film. Canadian Aeronautics and Space Journal, 39, (2), p. 96-104.

Laforte Jean-Louis, Louchez Patrick R. et Bouchard Gilles. (1992). Cold and humid environment simulation for de/anti-icing fluids evaluation. Cold Regions Science and Technology, 20, (2), p. 195-206.

Lago Araújo Seixas João Augusto. (2021). Développement d’un béton électriquement conducteur par utilisation des résidus de bauxite bruts ou transformés. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lai Jing. (2011). Developing Sc and Zr containing Al-B?C metal matrix composites for high temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing : From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing: From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2014). Atmospheric icing impact on wind turbine production. Cold Regions Science and Technology, 100, p. 36-49.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2013). Atmospheric icing severity : quantification and mapping. Atmospheric Research, 128, p. 57-75.

Lamraoui Fayçal, Fortin Guy, Perron Jean et Benoit Robert. (2015). Canadian icing envelopes near the surface and its impact on wind energy assessment. Cold Regions Science and Technology, 120, p. 76-88.

Laroche Frédéric. (1988). Étude des phénomenes d'oscillation régulière de l'interface bain-métal d'une cuve d'électrolyse. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Larouche Andre. (1988). Couplage de la methode des plans imaginaires en trois dimensions et du logiciel phoenics pour la modelisation de la chambre de combustion de fours industriels. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Larouche Daniel et Javidani Mousa. (2015). Mathematical analysis of the heat measured by a power-compensated differential scanning calorimeter during the solidification of a multiphase alloy. Journal of Thermal Analysis and Calorimetry, 122, (1), p. 197-205.

Larouche Ursula. (2016). Entre le développement durable et l’acceptabilité sociale : pour une éthique de la gestion des ressources naturelles : le cas d’Arianne Phosphate inc. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lashkari Omid. (2006). The rheological behavior of semi-solid A356 alloy. Thèse de doctorat, Université du Québec à Chicoutimi.

Lavigne Lise. (1991). Évaluation d'essais de corrosion réalisés en laboratoire et dans un épurateur humide. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lekounougou S. Thierry et Kocaefe Duygu. (2013). Bioresistance of thermally-modified Populus tremuloides (North American Aspen) wood against four decay fungi. International Wood Products Journal, 4, (1), p. 46-51.

Lekounougou S. Thierry et Kocaefe Duygu. (2012). Comparative study on the durability of heat-treated White Birch (Betula papyrifera) subjected to the attack of brown and white rot fungi. Wood Material Science & Engineering, 7, (2), p. 101-106.

Lekounougou S. Thierry et Kocaefe Duygu. (2014). Durability of thermally modified Pinus banksiana (Jack pine) wood against brown and white rot fungi. International Wood Products Journal, 5, (2), p. 92-97.

Lekounougou S. Thierry et Kocaefe Duygu. (2014). Effect of thermal modification temperature on the mechanical properties, dimensional stability, and biological durability of black spruce (Picea mariana). Wood Material Science & Engineering, 9, (2), p. 59-66.

Lekounougou S. Thierry, Kocaefe Duygu, Oumarou Noura, Kocaefe Yasar S. et Poncsák Sándor. (2011). Effect of thermal modification on mechanical properties of Canadian White Birch (Betula papyrifera). International Wood Products Journal, 2, (2), p. 101-107.

Lemieux Alain. (2012). Effets du Si, Cu et Fe sur les propriétés statiques et dynamiques d'un alliage 206 (Al-Cu) en semi-solide produit par le procédé SEED. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lemieux Samuel. (2009). Étude des phénomènes d'appauvrissement en magnésium et strontium dans l'élaboration du ferrosilicium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lepage Carl. (2003). Effets des éléments alliés et des traitements thermiques sur la microstructure et les propriétés de traction des alliages aluminium-silicium 413.0. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Gaofeng. (2012). Effect of trace elements V and Ni on Fe intermetallic phases formation and distribution in DC cast 5xxx series Al ingots. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Xiaojin. (2000). A study of hot-tearing during solidification of Aluminum alloys via the acoustic emission method. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Zheng. (2003). Paramètres contrôlant la précipitation et la dissolution de la phase CuAl2 du cuivre dans les alliages d'aluminium de type 319 et leurs influences sur la performance. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Chen. (2018). Precipitation behaviors of dispersoids induced from transition elements (Mn, Sc and Zr) and their effect on recrystallization resistance in AA6082 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Chen, Liu Kun et Chen X-Grant. (2020). Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology, 39, p. 135-143.

Li Cong. (2022). Relationship between thermal conductivity and electrical conductivity in B4C particle reinforced aluminum matrix composites. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Dong. (2020). Effet des éléments de transition sur les comportements de précipitation des dispersoïdes/précipités et les propriétés à haute température des alliages coulés Al-Si et Al-Cu. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Li Dong, Liu Kun et Chen X-Grant. (2023). Evolution of Microstructure and Elevated-Temperature Properties during Thermal Exposure with Transition Elements (V, Zr and Mo) in Al–Si 356 Type Cast Alloys. MATERIALS TRANSACTIONS, 64, (2), p. 406-413.

Li Dong, Liu Kun et Chen X-Grant. (2020). Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02003),

Li Dong, Liu Kun, Rakhmonov Jovid et Chen X-Grant. (2021). Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys. Materials Science and Engineering: A, 827, e142090.

Li J. S., Raoelison R. N., Sapanathan T., Zhang Zhan, Chen X-Grant, Marceau Daniel, Hou Y. L. et Rachik M.. (2020). An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. Applied Physics Letters, 116, (161601),

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). Effect of metastable Mg2Si and dislocations on α-Al(MnFe)Si dispersoid formation in Al-Mn-Mg 3xxx alloys. Metallurgical and Materials Transactions A, 49, (11), p. 5799-5814.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). Improvement in the mechanical properties and creep resistance of Al-Mn-Mg 3004 alloy with Sc and Zr addition. Materials Science and Engineering: A, 729, p. 196-207.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). The Influence of Cu addition on dispersoid formation and mechanical properties of Al-Mn-Mg 3004 alloy. Metals, 8, (3), e155.

Li Zhen, Zhang Zhan et Chen X-Grant. (2017). Microstructure, elevated-temperature mechanical properties and creep resistance of dispersoid-strengthened Al-Mn-Mg 3xxx alloys with varying Mg and Si contents. Materials Science and Engineering: A, 708, p. 383-394.

Lin Shan. (1999). A study of hot tearing in wrought Aluminium alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Liu Li. (2004). Paramètres métallurgiques contrôlant l'évolution microstructurale dans les alliages de fonderie Al-Si-Mg et Al-Si-Cu. Thèse de doctorat, Université du Québec à Chicoutimi.

Liu Li. (1997). Évaluation de la propreté des alliages d'aluminium de fonderie A356.2 et C357 à l'aide de la technique PoDFA. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Liu Kun, Cao X., Bolouri Amir et Chen X-Grant. (2019). Effect of Fe-rich intermetallics on tensile behavior of Al-Cu 206 cast alloys at solid and near-solid states. Dans : TMS-2019 Shape Casting: 7th International Symposium celebrating Prof. John Campbell’s 80 th Birthday , March 10-14, San Antonio, Texas.

Liu Kun et Chen X-Grant. (2015). Development of Al-Mn-Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening. Materials and Design, 84, p. 340-350.

Liu Kun et Chen X-Grant. (2015). Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys. Metallurgical and Materials Transactions B,

Liu Kun et Chen X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

Liu Kun et Chen X-Grant. (2018). Improvement in elevated-temperature properties of Al–13% Si piston alloys by dispersoid strengthening via Mn addition. Journal of Materials Research, 33, (20), p. 3430-3438.

Liu Kun et Chen X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

Liu Kun et Chen X-Grant. (2019). Influence of the modification of iron-bearing intermetallic and eutectic Si on the mechanical behavior near the solidus temperature in Al-Si-Cu 319 cast alloy. Physica B: Condensed Matter, 560, p. 126-132.

Liu Kun, Elgallad Emad, Li Chen et Chen X-Grant. (2021). Effects of Zr and Sc additions on precipitation of α-Al(FeMn)Si dispersoids under various heat treatments in Al–Mg–Si AA6082 alloys. International Journal of Materials Research, 112, (9), p. 706-716.

Liu Kun, Li Chen et Chen X-Grant. (2020). Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (03001),

Liu Kun, Ma Hezhaoye et Chen X-Grant. (2017). Enhanced elevated-temperature properties via Mo addition in Al-Mn-Mg 3004 alloy. Journal of alloys and compounds, 694, p. 354-365.

Liu Kun, Ma Hezhaoye et Chen X-Grant. (2018). Improving the Elevated-Temperature Properties by Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys. Metallurgical and Materials Transactions B, 49, (4), p. 1588-1596.

Liu Kun, Mirza Foisal Ahmed et Chen X-Grant. (2018). Effect of overaging on the cyclic deformation behavior of an AA6061 aluminum alloy. Metals, 8, (7), e528.

Liu Kun, Nabawy Ahmed et Chen X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Liu Kun, Wang Shuai, Hu Peng, Pan Lei et Chen X-Grant. (2023). Improved Thermo-Mechanical Fatigue Resistance of Al-Si-Cu 319 Alloys by Microalloying with Mo. Materials, 16, (9), e3515.

Liu Kun, Wang Shuai, Pan Lei et Chen X-Grant. (2023). Thermo-Mechanical fatigue behavior and resultant microstructure evolution in Al-Si 319 and 356 cast alloys. Materials, 16, (2), p. 829.

Liu Mengyun. (2018). Quench sensitivity of high pressure vacuum die castings and permanent mold castings of Aural-3/5 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2019). Investigation of the quench sensitivity of an AlSi10Mg alloy in permanent mold and high-pressure vacuum die wastings. Materials, 12, (11), e1876.

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2020). Quench sensitivity and phase transformation kinetics of AlSi7MnMg high pressure vacuum die casting. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02001),

Loiselle Luc. (2013). Influence des produits de dégradation sur la stabilité thermique et diélectrique des fluides isolants pour les transformateurs de puissance. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Loiselle Luc et Fofana Issouf. Influence de la qualité de l’huile isolante sur le refroidissement des transformateurs de puissance. Dans : Xe Colloque interuniversitaire Franco-québécois sur la thermique des systèmes , 20-22 juin 2011, Saguenay, Québec.

Loiselle Luc, Fofana Issouf et Hume D.. Influence of transformer oil decay products on its thermal conductivity. Dans : 31st International thermal conductivity conference (ITCC) and the 19th International thermal expansion symposium (ITES) , June 26-30, 2011, Chicoutimi, Québec.

Loiselle Luc, Fofana Issouf, Olivares-Galvan Juan Carlos et Campero E.. (2012). Stability of environmental friendly fluids under electrical and thermal stresses. Dans : Conference Record of the 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012) , 10-13 june 2012, San Juan, Puerto Rico.

Loiselle Luc, Fofana Issouf et Sabau J.. Influence of ageing by-products on the stability of some transformer fluids. Dans : 2012 CIGRÉ Canada conférence, Hilton Montréal Bonaventure , Septembre 24-26, 2012, Montréal, Québec.

Loiselle Luc, Fofana Issouf, Sabau John, Magdaleno-Adame Salvador et Olivares-Galvan Juan Carlos. (2015). Comparative studies of the stability of various fluids under electrical discharge and thermal stresses. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2491-2499.

Louchez P. R., Laforte Jean-Louis, Bouchard Gilles et Farzaneh Masoud. (1995). Laboratory evaluation of aircraft ground de/antiicing products. International Journal of Offshore and Polar Engineering, 5, (1),

Lu Ying. (2016). Effect of pitch properties on anode properties. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Coulombe Patrick. (2016). Study of the wettability of coke by different pitches and their blends. Energy and Fuels, 30, (11), p. 9210-9216.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Morais Brigitte. (2016). Study of the wetting of coke by different pitches. Light Metals, p. 871-876.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Huang Xianai et Bhattacharyay Dipankar. (2017). The wettability of coke by pitches with different quinoline-insoluble contents. Fuel, 199, p. 587-597.

M

Ma Zheyuan. (2002). Effets des intermétalliques de fer et des porosités sur les propriétés de traction et d'impact sur les alliages de coulée Al-Si-Cu et Al-Si-Mg. Thèse de doctorat, Université du Québec à Chicoutimi.

Ma Hezhaoye. (2015). The effects of Mo addition and heat treatment on elevated temperature properties of AA3004 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ma K., Elgallad Emad M., Chen Zhixing, Xiao B. L. et Chen X-Grant. (2022). Improving the elevated-temperature mechanical properties of AA3004 hot-rolled sheets by microalloying with Mo and optimizing the process route. Journal of Materials Research and Technology, 19, p. 4489-4503.

Ma K., Li X. N., Liu Kun, Chen X-Grant, Liu Z. Y., Xiao B. L. et Ma Zheyuan. (2021). Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones. Composites Part B: Engineering, 222, e109094.

Ma K., Liu Z. Y., Liu Kun, Chen X-Grant, Xiao B. L. et Ma Zheyuan. (2021). Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon, 178, p. 190-201.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2016). Development of a Nanodielectric TiO2 coating based on silicone rubber. Dans NANO 2016 – XIIIth International Conference on Nanostructured. (2016, 2016, ). Lund, Sweden : International Committee on Nanostructured Materials.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2016). Development of a stable TiO2 nanocomposite self-cleaning coating for outdoor applications. Advances in Materials Science and Engineering, 2016, e7958152.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2018). Dielectric properties of TiO2/Silicone Rubber micro- and nanocomposites. Advances in Materials Science and Engineering, 2018, e4682076.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2013). Effect of filler concentration on dielectric properties of RTV silicone rubber/TiO2 nanocomposite. Dans 2013 IEEE Electrical Insulation Conference (EIC). (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Magdaleno-Adame Salvador, Olivares-Galvan Juan Carlos, Escarela-Perez R., Fofana Issouf, Loiselle Luc et Georgilakis P. S.. (2012). Study of parameters influencing the performance of connectors used for load and temperature tests on transformers. Dans : Conference Record of the 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012) , 10-13 june 2012, San Juan, Puerto Rico.

Maghsoudi Khosrow. (2020). Development of self-cleaning polymeric surfaces using polymer processing systems for application to high-voltage insulators. Thèse de doctorat, Université du Québec à Chicoutimi.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2018). Fabrication of Polymer Micro-Nanostructured Surfaces: Mold Inserts, Processing Parameters and Demolding. Dans Valente Erasmo Silva (dir.), Polymer surfaces: fabrication, modification and applications. (). Polymer Science and Technology. New York : Nova Science Publishers.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2017). Micro-nanostructured polymer surfaces using injection molding : a review. Materials today communications, 13, p. 126-143.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2017). Micro-nanostructured polymer surfaces using injection molding: A review. Materials today communications, 13, p. 126-143.

Maghsoudi Khosrow, Momen Gelareh et Jafari Reza. (2023). The thermodynamic stability of the Cassie–Baxter regime determined by the geometric parameters of hierarchical superhydrophobic surfaces. Applied Materials Today, 34, e101893.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2018). Direct replication of micro-nanostructures in the fabrication of superhydrophobic silicone rubber surfaces by compression molding. Applied Surface Science, 458, p. 619-628.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2019). Rigorous testing to assess the self-cleaning properties of an ultra-water-repellent silicone rubber surface. Surface and Coatings Technology, 374, p. 557-568.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured silicone rubber surfaces using compression molding.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured Silicone Rubber Surfaces Using Compression Molding. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, 2018, ). Switzerland : Materials Science Forum.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured silicone surfaces for highvoltage application. Dans : 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 21-24 Oct. 2018, Cancun, Mexico.

Maghsoudi Khosrow, Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2020). Evaluating the effect of processing parameters on the replication quality in the micro compression molding of silicone rubber. Materials and Manufacturing Processes, 35, (14), p. 1567-1575.

Maghsoudi Khosrow, Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2020). Advances in the fabrication of superhydrophobic polymeric surfaces by polymer molding processes. Industrial & Engineering Chemistry Research, 59, (20), p. 9343-9363.

Maghsoudi Khosrow, Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2021). Icephobicity and durability assessment of superhydrophobic surfaces: the role of surface roughness and the ice adhesion measurement technique. Journal of Materials Processing Technology, 288,

Mahmoud Mohamed. (2018). Effects of rare earth metal additions on the performance of Al-Cu and Al-Si-Cu based alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Maroufkhani Aida, Charpentier Claire, Morency François et Momen Gelareh. (2023). Effect of Variable Melting Temperature on the Enthalpy Model for Runway Deicing. Dans : SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE , 20 June 2023through 23 June 2023, Vienna.

Matbou Riahi Mehran, Marceau Daniel, Laforte Caroline et Perron Jean. (2011). The experimental/numerical study to predict mechanical behaviour at the ice/aluminium interface. Cold Regions Science and Technology, 65, (2), p. 191-202.

Mayer Christine, Ilinca Adrian, Fortin Guy et Perron Jean. (2007). Wind tunnel study of the electro-thermal de-icing of wind turbine blades. International Journal of Offshore and Polar Engineering, 17, (3), p. 182-188.

Mayer Christine, Ilinca Adrian, Fortin Guy et Perron Jean. (2007). Wind tunnel study of the electro-thermal de-icing of wind turbine blades. Dans : Proceedings of the 17th International Offshore and Polar Engineering Conference (ISOPE) , July 1-6, 2007, Lisbon, Portugal.

Mbakop Rodrigue Stéphane. (2020). Étude de la compaction et du préformage de renforts à fibres unidirectionnelles de lin retenues par un liant papier ou mat. Thèse de doctorat, Université du Québec à Chicoutimi.

McLean John, Saeidi Ali, Chavali Rama Vara Prasad, Seifaddini Rashk Olia Mahdiyeh, Clement Andreanne, Barbarisque Thomas et Bilodeau Jean-Pascal. (2023). Adfreeze Strength of Wooden Piles in Warm Permafrost Soil. Journal of Cold Regions Engineering, 37, (2),

Meenken Thomas. (2003). Analysis of the cooling capacity of water as a function of its quality during DC casting. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Meysami A. H., Ghasemzadeh R., Seyedein S. H., Aboutalebi M. R., Ebrahimi R. et Javidani Mousa. (2009). Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching. Journal of Iron and Steel Research International, 16, (6), p. 47-51.

Michel Frédéric. (1994). Influence des paramètres de fonderie sur le transfert de chaleur au cours de la solidification pour des alliages aluminium silicium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Millet Guillaume, Otis Martin J.-D., Horodniczy Daniel et Cooperstock Jeremy R.. (2017). Design of variable-friction devices for shoe-floor contact. Mechatronics, 46, p. 115-125.

Mirza Foisal Ahmed, Macwan A., Bhole S.D., Chen D.L. et Chen X-Grant. (2016). Effect of welding energy on microstructure and strength of ultrasonic spot welded dissimilar joints of aluminum to steel sheets. Materials Science and Engineering: A, 668, p. 73-85.

Mirza Foisal Ahmed, Macwan A., Bhole S.D., Chen D.L. et Chen X-Grant. (2017). Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets. Materials Science and Engineering: A, 690, p. 323-336.

Mofarrehi Mohammadreza. (2022). Thermomechanical behavior of Al-Mg-Mn alloys: effect of Mn and Na on hot workability. Thèse de doctorat, Université du Québec à Chicoutimi.

Mofarrehi Mohammadreza, Javidani Mousa et Chen X-Grant. (2021). On the intermetallic constituents in the sodium-induced edge cracking of hot-rolled AA5182 aluminum alloys. Philosophical Magazine, 101, (16), p. 1849-1870.

Moghadam Saba Goharshenas, Bakhshandeh Ehsan, Jafari Reza et Momen Gelareh. (2023). In-depth analysis of the effect of physicochemical properties of ionic liquids on anti-icing behavior of silicon based-coatings. Cold Regions Science and Technology, 216, e104007.

Mohamed Adel. (2008). Effet des additifs sur la microstructure et les propriétés mécaniques des alliages d'aluminium-silicium. Thèse de doctorat, Université du Québec à Chicoutimi.

Mohamed Adel, Jafari Reza et Farzaneh Masoud. (2014). An optimization of superhydrophobic polyvinylidene fluoride/zinc oxide materials using Taguchi method. Applied Surface Science, 288, p. 229-237.

Molin Antoine. (2015). Étude expérimentale sur les mécanismes de dissolution de l'alumine. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Momen Gelareh. (2021). Aqueous self-lubricating icephobic coatings inspired by ice skating. Dans : 36th International Conference of the Polymer Processing Society , September 26-29, 2021, Montréal, Canada.

Momen Gelareh, Allahdini Anahita et Jafari Reza. (2020). Self-healing coating for anti-icing application. Dans : Smart Coatings 2020 , February 26-28, 2020, Orlando, Florida, US.

Momen Gelareh, Allahdini Anihita et Jafari Reza. (2020). Development of icephobic PDMS coatings by a hybrid approach. Dans : Smart Coatings 2020 , February 26-28, 2020, Orlando, Florida, US.

Momen Gelareh et Farzaneh Masoud. (2014). Facile approach in the development of icephobic hierarchically textured coatings as corrosion barrier. Applied surface science, 299, p. 41-46.

Momen Gelareh et Farzaneh Masoud. (2011). Simple process to fabricate a superhydrophobic coating. Micro & Nano Letters, 6, (6), p. 405-407.

Momen Gelareh et Farzaneh Masoud. (2011). Study of ice accumulation on nanocomposite semiconducting coatings. Dans 2010 Annual Report Conference on Electrical Insulation and Dielectic Phenomena. (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Momen Gelareh et Farzaneh Masoud. (2012). Superhydrophobic RTV silicone rubber coatings on anodized aluminium surfaces. Materials Science Forum, 706-709, p. 2546-2551.

Momen Gelareh et Farzaneh Masoud. (2011). Survey of micro/nano filler use to improve silicone rubber for outdoor insulators. Reviews on Advanced Materials Science, 27, (1), p. 1-13.

Momen Gelareh et Farzaneh Masoud. (2012). A ZnO-based nanocomposite coating with ultra water repellent properties. Applied Surface Science, 258, (15), p. 5723-5728.

Momen Gelareh, Farzaneh Masoud et Carreira Antony Jé. (2011). Icephobic and superhydrophobic silicone rubber coatings for outdoor insulators. Dans : IWAIS 2011 : the 14th International Workshop on Atmospheric Icing of Structures , May 8-13, 2011, Chongqing, China.

Momen Gelareh, Farzaneh Masoud et Jafari Reza. (2011). Wettability behaviour of RTV silicone rubber coated on nanostructured aluminium surface. Applied Surface Science, 257, (15), p. 6489-6493.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Firdaous Mohamed, Leneindre Bertrand, Madec Laurent et Hassouni Khaled. (2005). Numerical simulation of hydrogen storage under high pressure in porous packed bed. Dans : IHEC International Hydrogen Energy Congress & Exhibition, 2005 , 2005, Istambul, Turkey.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Pons M., Firdaous Mohamed et Hassouni Khaled. (2009). Hydrogen storage in an activated carbon bed: Effect of energy release on storage capacity of the tank. International Journal of Hydrogen Energy, 34, (9), p. 3799-3809.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Pons M., Firdaous Mohamed, Marty Philippe et Hassouni Khaled. (2009). Experimental and numerical investigation of the thermal effects during hydrogen charging in packed bed storage tank. International Journal of Heat and Mass Transfer, 52, (5-6), p. 1495-1503.

Momen Gelareh et Jafari Reza. (2018). Ingénierie biomimétique pour développer des surfaces glaciophobes. Dans : 86e Congrès de l'ACFAS , 7-11 May 2018, Saguenay, Québec.

Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2015). Ice repellency behaviour of superhydrophobic surfaces: Effects of atmospheric icing conditions and surface roughness. Applied surface science, 349, p. 211-218.

Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2013). On the oil repellency of nanotextured aluminum surface. International Journal of Materials and Metallurgical Engineering, 7, (6), p. 463-467.

Momen Gelareh, Jafari Reza, Fofana Issouf et Carrière J.. (2019). Protective coatings to prevent ice build-up on steel port structures. Dans : International Congress on Industrial Port Research , May 27-31, 2019, Sept-Îles, Québec.

Momen Gelareh, Jafari Reza et Hassouni Khaled. (2010). On the effect of process temperature on the performance of activated carbon bed hydrogen storage tank. International Journal of Thermal Sciences, 49, (8), p. 1468-1476.

Momen Gelareh, Madidi Fatima Zahra et Farzaneh Masoud. (2012). A one-step process to fabricate superhydrophobic nanocomposite coating. Dans : 4th International Conference on Nanostructures ICNS4 , March 12th-14th, 2012, Kish Island, Iran.

Morais Brigitte. (2022). Relationship between paste components and anode quality for the primary aluminum industry. Thèse de doctorat, Université du Québec à Chicoutimi.

Moravej Maryam, Amira Sofiene, Prima Frédéric, Rahem Ahmed, Fiset Michel et Mantovani Diego. (2011). Effect of electrodeposition current density on the microstructure and the degradation of electroformed iron for degradable stents. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 176, (20), p. 1812-1822.

Moreau Charles. (2004). Effets des éléments alliés et de la trempe, lors des traitements thermiques T4 et des vieillissements artificiels, sur la microstructure et les propriétés mécaniques des alliages aluminium-silicium de type 413. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Morin Sébastien. (2002). Effet du magnésium, des traitements thermiques et de la porosité sur les propriétés mécaniques de traction et de fatigue de l'alliage sous pression A380.1. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Murray-Chiasson Audrey. (2002). Étude de la relâche des inclusions lors de la filtration de l'aluminium liquide. Mémoire de maîtrise, Université du Québec à Chicoutimi.

N

Nabawy Ahmed. (2010). Influence of zirconium and scandium on the microstructure, tensile properties, and hot-tearing susceptibility of Al-2WT%Cu-based alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Nadeau Charles. (2016). Modélisation de l’épaississement de la boue rouge par cisaillement. Thèse de doctorat, Université du Québec à Chicoutimi.

Nafisi Shahrooz. (2006). Effects of grain refining and modification on the microstructural evolution of semi-solid 356 alloy = Effets de l'affinage des grains et de la modification sur l'évolution microstructurale de l'alliage 356 semi-solide. Thèse de doctorat, Université du Québec à Chicoutimi.

Nazari Babak, Ranjbar Zahra, Rafiei Hashjin Ra'na, Rezvani Moghaddam Amir, Momen Gelareh et Ranjbar Behnaz. (2019). Dispersing graphene in aqueous media: investigating the effect of different surfactants. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 582, e123870.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2012). Verification of insulation oil reclamation by turbidity and spetrophotometry measurements. Journal of Energy and Power Engineering, 6, p. 703-712.

N'cho Janvier Sylvestre, Loiselle Luc, Fofana Issouf, Beroual A. et Aka-Ngnui T.. Parameters affecting the electrical and thermal properties of transformer oils. Dans : 2010 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP , October 17-20 2010, West Lafayette, USA.

Nikzad Khangholi Siamak. (2021). Improvement of mechanical strength and electrical conductivity in 6xxx series aluminum conductor alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2021). Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys. Materials Science and Engineering: A, 820, p. 141538.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels. Dans : The 17th International Conference on Aluminium Alloys 2020 (ICAA17) , October 26-29, 2020, Grenoble, France.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Optimization of mechanical properties and electrical conductivity in Al–Mg–Si 6201 alloys with different Mg/Si ratios. Journal of Materials Research, 35, (20), p. 2765-2776.

Noormohammed Saleema. (2009). Nanostructured thin films for icephobic applications = Couches minces nanostructurées pour des applications glaciophobes. Thèse de doctorat, Université du Québec à Chicoutimi.

Noormohammed Saleema et Sarkar Dilip K.. (2021). Rf-sputtered Teflon®-modified superhydrophobic nanostructured titanium dioxide coating on aluminum alloy for icephobic applications. Coatings, 11, (4), p. 432.

Noui Omar. (2012). Étude et modélisation des citernes en aluminium pour les véhicules routiers. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Nuamah Rania Afia. (2022). Engineered nanomaterials for energy application. Thèse de doctorat, Université du Québec à Chicoutimi.

Nuamah Rania Afia, Noormohammed Saleema et Sarkar Dilip K.. (2021). Pulsed reverse potential electrodeposition of carbon-free Ni/NiO nanocomposite thin film electrode for energy storage supercapacitor electrodes. Coatings, 11, (7), p. 780.

Nuamah Rania Afia, Noormohammed Saleema et Sarkar Dilip K.. (2021). Specific capacitance behavior of Co-Co3O4 nanocomposite thin films synthesized via different electrodeposition modes. International Journal of Energy Research, p. 1-11.

O

Olivares-Galvan Juan Carlos, Escarela-Perez R., Georgilakis P. S., Fofana Issouf et Magdaleno-Adame Salvador. (2012). A bibliographic analysis of transformer literature 1990-2000. Electrical and Electronic Engineering, 2, (3), p. 96-121.

Ouellet Pascal. (1997). Effet du titre en magnésium et des traitements thermiques T5 et T6 sur les propriétés mécaniques de l'alliage d'aluminium 319 non-modifié et modifié. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ouellet Réjean. (1987). Étude du problème d'ablation à deux dimensions par la méthode des éléments finis de frontière. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ouellet R., Bui Rung-Tien et Perron Jean. (1990). Numerical simulation of a casting furnace. Simulation, 54, (2), p. 92-100.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2014). 3D-modelling of conjugate heat and mass transfers: effects of storage conditions and species on wood high temperature treatment. International Journal of Heat and Mass Transfer, 79, p. 945-953.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2018). An advanced dynamic process model for industrial horizontal anode baking furnace. Applied Mathematical Modelling, 53, p. 384-399.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2016). Investigation of the refractory bricks used for the flue wall of the horizontal anode baking ring furnace. Ceramics International, 42, (16), p. 18436-18442.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2016). Transient process model of open anode baking furnace. Applied Thermal Engineering, 107, p. 1253-1260.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Chabot Jérôme. A dynamic process model for simulating horizontal anode baking furnaces. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Oumarou Noura, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. (2015). A dynamic process model for predicting the performance of horizontal anode baking furnaces. Light metals, p. 1081-1086.

P

Palanque Valerian, Villeneuve Éric, Budinger M., Pommier-Budinger Valérie et Momen Gelareh. (2022). Cohesive strength and fracture toughness of atmospheric ice. Cold Regions Science and Technology, 204, e103679.

Palanque Valerian, Villeneuve Éric, Budinger M., Pommier-Budinger Valérie et Momen Gelareh. (2023). Experimental measurement and expression of atmospheric ice Young's modulus according to its density. Cold Regions Science and Technology, 212, e103890.

Palanque Valerian, Villeneuve Éric, Budinger M., Pommier-Budinger Valérie et Momen Gelareh. (2023). Experimental measurement and expression of atmospheric ice Young's modulus according to its density. Cold Regions Science and Technology, 212, e103890.

Pan Lei. (2016). Effects of alloying elements on the microstructure and properties of 8xxx electrical conductor alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Pan Lei, Liu Kun, Breton Francis et Chen X-Grant. (2016). Effect of Fe on microstructure and properties of 8xxx aluminum conductor alloys. Journal of Materials Engineering and Performance, 25, (12), p. 5201-5208.

Pan Lei, Mirza Foisal Ahmed, Liu Kun et Chen X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Paradis Mathieu. (2010). Performance des pièces coulées selon le procédé de la mousse perdue à partir des alliages Al-Mg-Si et Al-Cu. Thèse de doctorat, Université du Québec à Chicoutimi.

Paradis Mathieu. (2003). Évaluation et identification des inclusions dans les alliages de magnésium AM50A et AZ91D. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Parenteau Charles. (2010). Développement d'un nouveau concept, d'une remorque ultralégère en aluminium : étude statique et dynamique. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Perron Jean. (1987). Modélisation mathématique simplifiée d'un four de métal chaud. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Perron Éric, Louchez P. R. et Laforte Jean-Louis. (1996). Introductory analysis of boundary-layer development on de/anti-icing fluid. Journal of Aircraft, 33, (1), p. 74.

Perron Jean et Auger Marc. Process for controlling rotary calcining kilns and control system therefor. .

Perron Jean, Bouvette Jean-François et Dupuis Marc. Optimization of anthracite calcination process in a vertical electric arc furnace. Dans : Light Metals: Proceedings of Sessions, TMS Annual Meeting , 1996, Warrendale, Pennsylvania.

Perron Jean et Bui Rung-Tien. (1994). Fours rotatifs : modèle dynamique du mouvement du lit. The Canadian Journal of Chemical Engineering, 72, (1), p. 16-26.

Perron Jean et Bui Rung-Tien. (1990). Rotary cylinders : solid transport prediction by dimensional and rheological analysis. The Canadian Journal of Chemical Engineering, 68, (1), p. 61-68.

Perron Jean et Bui Rung-Tien. (1992). Rotary cylinders : transverse bed motion prediction by rheological analysis. The Canadian Journal of Chemical Engineering, 70, (2), p. 223-231.

Perron Jean, Bui Rung-Tien, Charette André, Stevens W. et Dernedde E.. Computer simulation of an aluminum casting furnace. Dans : Light Metals, 1987: Proceedings of the Technical Sessions Sponsored by the TMS Light Metal Committee at the 116th Annual Meeting , February 24-26, 1987, Denver, Colorado.

Perron Jean, Bui Rung-Tien et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : I. le modèle. The Canadian Journal of Chemical Engineering, 70, (6), p. 1108-1119.

Perron Jean, Bui Rung-Tien et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : II. Simulation du procédé. The Canadian Journal of Chemical Engineering, 70, (6), p. 1120-1131.

Perron Jean, Castonguay Lise, Bui Rung-Tien et Nguyen H. T.. Optimization of coke calcining kiln operation using mathematical modelling. Dans : Light metals 1990 : proceedings of the technical sessions by the TMS Light Metals Committee at the 119 TMS annual meeting , February 18-22, 1990, Anaheim, California.

Perron Jean, Laforte Caroline, Quinlan Peter et Zimcik David. De-icing system and method = Procédé et système de dégivrage. .

Perron Jean et Larocque Jacques. Alumina crystalliser mixing using CFD. Dans : Light Metals: Proceedings of Sessions, TMS Annual Meeting , 1994, Warrendale, Pennsylvania.

Perron Jean et Larocque Jacques. (2013). Alumina Crystallizer Mixing Using CFD. Dans Don Donaldson et Benny E. Raahauge (dir.), Essential Readings in Light Metals: Alumina and Bauxite, Volume 1. (p. 563-569). Hoboken, N.J. : John Wiley.

Perron Jean et Munger Frédérick. (2022). Analyse des systèmes et matrice d'état : exercices multi-physiques. Chicoutimi : Université du Québec à Chicoutimi.

Perron Jean, Potocnik Vinko et Bui Rung-Tien. Modelling of the coke calcining kiln. Dans : CIM 1988 - 27th Annual conference of metallurgists : reduction and casting of aluminum Vol. 8 , August 28-31, 1988, Montréal, Canada.

Perron Jean, Proulx André L., Desgroseillers B. et Auger Marc. Petroleum coke calcination process improvement using a mathematical modelling tool and new kiln instrumentation. Dans : Proceedings of the technical sessions presented by TMS Light Metals committee at the 124th TMS Annual meeting , February 12-16, 1995, Las Vegas, Nevada.

Poncsák Sándor. (2000). Formation et évolution des bulles de gaz au-dessous de l'anode dans une cuve d'électrolyse d'aluminium. Thèse de doctorat, Université du Québec à Chicoutimi.

Poncsák Sándor, Kiss László, Guérard Sébastien et Bilodeau Jean-François. (2017). Impact of the solidification rate on the chemical composition of frozen cryolite bath. Metals, 7, (3), p. 97.

Portaix Christophe. (2000). Étude de la phase d'accrétion de la glace atmosphérique sur des câbles. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Proulx Marc-Urbain et Brassard Diane. (2011). La filière québécoise de l'aluminium en 2011 en bref. Chicoutimi (QC) : Centre de recherche sur le développement territorial (CRDT).

Q

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2022). Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys. Journal of Materials Science,

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2023). Temperature dependence of elastic properties of Al-Mg-Si direct-Chill-cast AA6111 alloy at near-solidus temperatures. Journal of Materials Engineering and Performance,

Qian Cheng, Ménard Sylvain, Bard Delphine et Negreira Juan. (2019). Development of a vibroacoustic stochastic finite element prediction tool for a CLT floor. Applied Sciences, 9, (6), e1106.

Qian Xiaoming. (2019). Hot deformation behavior of 6xxx aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effect of homogenization treatment and microalloying with Mn on the microstructure and hot workability of AA6060 aluminum alloys. Journal of Materials Engineering and Performance, 28, (8), p. 4531-4542.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effect of post-homogenisation cooling rate and Mn addition on Mg2Si precipitation and hot workability of AA6060 alloys. Canadian Metallurgical Quarterly, 59, (2), p. 189-200.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effects of Mn addition and related Mn-containing dispersoids on the hot deformation behavior of 6082 aluminum alloys. Materials Science and Engineering: A, 764, p. 138253.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing. Journal of Materials Science & Technology, 52, p. 189-197.

Qin Jian. (2016). Mechanical properties and hot workability of Al-15%B4C metal matrix composites with Sc and Zr for elevated temperature applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Qin Jian, Zhang Zhan et Chen X-Grant. (2019). Evolution of activation energy during hot deformation of Al–15% B4C composites containing Sc and Zr. AIMS Materials Science, 6, (4), p. 484-497.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr. Journal of Materials Engineering and Performance, 26, (4), p. 1673-1684.

Qin Jian, Zhang Zhan et Chen X-Grant. (2016). Mechanical properties and strengthening mechanisms of Al-15 Pct B4C composites with Sc and Zr at elevated temperatures. Metallurgical and Materials Transactions A, 47, (9), p. 4694-4708.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature. Journal of composite materials, 51, (18), p. 2643-2653.

R

Rabbani Saad, Bakhshandeh Ehsan, Jafari Reza et Momen Gelareh. (2022). Superhydrophobic and icephobic polyurethane coatings: Fundamentals, progress, challenges and opportunities. Progress in Organic Coatings, 165, p. 106715.

Rabbani Saad, Jafari Reza et Momen Gelareh. (2022). Superhydrophobic micro-nanofibers from PHBV-SiO2 biopolymer composites produced by electrospinning. Functional Composite Materials, 3, (1),

Racine Dany. (2009). Effet du temps et de la température sur l'homogénéisation d'un alliage d'aluminium AA6061 destiné au forgeage à chaud. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ragab Khaled Ahmed. (2012). The use of fluidized sand bed as an innovative technique for heat treating aluminum based castings. Thèse de doctorat, Université du Québec à Chicoutimi.

Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2018). Influence of thermal aging parameters on the characteristics of aluminum semi-solid alloys. Metals, 8, (10), e746.

Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2019). Quality index charts of Al-Si-Mg semi solid alloys subjected to multiple temperatures aging treatments and different quenching media. Materials, 12, (11), e1834.

Rahem Ahmed. (2001). Analyse non linéaire en grandes rotations et grands déplacements des structures minces métalliques. Thèse de doctorat, Université Laval.

Rakhmonov Jovid, Liu Kun et Chen X-Grant. (2020). Effects of compositional variation on the thermal stability of θ′-Al2Cu precipitates and elevated-temperature strengths in Al-Cu 206 alloys. Journal of Materials Engineering and Performance, 29, (11), p. 7221-7230.

Rakhmonov Jovid, Liu Kun, Pan Lei, Breton Francis et Chen X-Grant. (2020). Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg. Journal of Alloys and Compounds, 827, (154305),

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content. Journal of Alloys and Compounds, 861, p. 157937.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Enhanced elevated-temperature strength and creep resistance of dispersion-strengthened Al-Mg-Si-Mn AA6082 alloys through modified processing route. Materials, 14, (19), e5489.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2020). Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high-temperature exposure through dispersoid strengthening. Materials, 13, (22), p. 5295.

Rakhmonov Jovid, Qassem Mohamed, Larouche Daniel, Liu Kun, Javidani Mousa, Colbert Josée et Chen X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Rakotondramanana L., Kiss László, Poncsák Sándor, Guérard Sébastien et Bilodeau Jean-François. (2020). Mass transport by waves on the bath metal interface in electrolysis cell. Light Metals, 2020, p. 510-516.

Rasmussen Dany. (2008). Étude sur la fissuration à chaud de l'alliage 6061 lors du soudage par procédé hybride laser-GMAW. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Rastegari Armita. (2023). Improvement of anode quality through pitch modification. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ravelomanantsoa Naivonirina. (2012). Effet du vent sur le taux d'accumulation de pollution à la surface des isolateurs de haute tension dans les conditions hivernales. Thèse de doctorat, Université du Québec à Chicoutimi.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu et Coulombe Patrick. (2017). 2-DOF dynamic model of vibro-compactor used for the carbon anodes block production. CIRP Journal of Manufacturing Science and Technology, 18, p. 45-52.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu et Morais Brigitte. (2013). Development of an analytical dynamic model of a vibro‐compactor used in carbon anode production. Light Metals, p. 1111-1115.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu, Morais Brigitte et Lagacé Charles-Luc. Physical and mechanical characterizations of carbon anodes produced from different vibro-compactors. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Rebaïne Fatma, Bouazara Mohamed, Rahem Ahmed et St-Georges Lyne. (2018). Static and vibration analysis of an aluminium and steel bus frame. World Journal of Mechanics, 8, (4), p. 112-135.

Richer T., Dion Lukas, Kiss László, Guérard Sébastien, Bilodeau Jean-François et Rakotondramanana L.. (2022). Mass Transport by Waves: Physical Model with Coalescence, Fragmentation, and Displacement on a Bath-Metal Interface. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 371-380). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Riverin Gaston. (1993). Purification de l'aluminium par cristallisation fractionnée. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Riviere Pauline. (2020). Simulation de la réplication de microstructures en polymère par moulage à injection. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Roger Thomas. (2022). Modélisation mathématique de la formation d'agrégats et de la dissolution de l'alumine dans le bain d'électrolyse. Thèse de doctorat, Université du Québec à Chicoutimi.

Roger Thomas, Kiss László, Dion Lukas, Guérard Sébastien, Bilodeau Jean-François, Bonneau Guillaume, Santerre R. et Fraser Kirk A.. (2022). Modeling of the Heat Exchange, the Phase Change, and Dissolution of Alumina Injected in Electrolysis Cells. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 363-370). The Minerals, Metals & Materials Series. Cham, Switzerland : Springer.

Ronneberg Sigrid, Laforte Caroline, Volat Christophe, He Jianying et Zhang Zhiliang. (2019). The effect of ice type on ice adhesion. AIP Advances, 9, (5), 055304.

Ronneberg Sigrid, Zhuo Yizhi, Laforte Caroline, He Jianying et Zhang Zhiliang. (2019). Interlaboratory study of ice adhesion using different techniques. Coatings, 9, (10), p. 678.

Roshan Shamim, Sarabi Ali Asghar, Jafari Reza et Momen Gelareh. (2022). One-step fabrication of superhydrophobic nanocomposite with superior anticorrosion performance. Progress in Organic Coatings, 169, e106918.

Rouget Geoffroy, Manolescu Petre, Picard Donald, Duchesne Carl, Alamdari Houshang et Kocaefe Duygu. Acoustic emission techniques to measure the properties of coke particles: a first foray. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Roy Normand. (1994). Étude paramétrique de l'évolution de la porosité dans le système Al-9%Si-3%Cu. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Rozga Pawel, Jayasree T., Ungarala Mohan Rao, Fofana Issouf et Picher Patrick. (2021). Prebreakdown and Breakdown Phenomena in Ester Dielectric Liquids. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 147-183). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

S

Safaee Alireza. (2008). Nanostructured metal surfaces and their passivation for superhydrophobic and anti-icing applications = Les surfaces nanostructurées et leur passivation pour des applications des revêtements superhydrophobes et glaciophobes. Thèse de doctorat, Université du Québec à Chicoutimi.

Safaee Alireza, Sarkar Dilip K. et Farzaneh Masoud. (2008). Superhydrophobic properties of silver-coated films on copper surface by galvanic exchange reaction. Applied Surface Science, 254, (8), p. 2493-2498.

Saha Sudeshna, Kocaefe Duygu, Boluk Yaman et Pichette André. (2011). Enhancing exterior durability of jack pine by photo-stabilization of acrylic polyurethane coating using bark extract. Part 1: Effect of UV on color change and ATR–FT-IR analysis. Progress in Organic Coatings, 70, (4), p. 376-382.

Saha Sudeshna, Kocaefe Duygu, Boluk Yaman et Pichette André. (2013). Surface degradation of CeO2 stabilized acrylic polyurethane coated thermally treated jack pine during accelerated weathering. Applied Surface Science, 276, p. 86-94.

Saha Sudeshna, Kocaefe Duygu, Krause Cornelia et Larouche Tommy. (2011). Effect of titania and zinc oxide particles on acrylic polyurethane coating performance. Progress in Organic Coatings, 70, (4), p. 170-177.

Saha Sudeshna, Kocaefe Duygu, Sarkar Dilip K., Boluk Yaman et Pichette André. (2011). Effect of TiO2-containing nano-coatings on the color protection of heat-treated jack pine. Journal of Coatings Technology and Research, 8, (2), p. 183-190.

Saleema Noormohammed, Farzaneh Masoud, Paynter Royston W. et Sarkar Dilip K.. (2011). Prevention of ice accretion on aluminum surfaces by enhancing their hydrophobic properties. Journal of Adhesion Science and Technology, 25, p. 27-40.

Saleema Noormohammed, Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2012). Polymer masks fabrication by micropatterning surfaces of composite polymer coatings. Journal of Adhesion Science and Technology, 26, (22), p. 2531-2541.

Saleema Noormohammed, Sarkar Dilip K., Gallant Danick, Paynter Royston W. et Chen X-Grant. (2011). Chemical Nature of Superhydrophobic Aluminium Alloy Surfaces Produced via a One-Step Process Using Fluoroalkyl-Silane in a Base Medium. ACS Applied Materials & Interfaces, 3, (12), p. 4775-4781.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W. et Chen X-Grant. (2010). Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Applied Materials & Interfaces, 2, (9), p. 2500-2502.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W., Gallant Danick et Eskandarian Masoomeh. (2012). A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications. Applied Surface Science, 261, p. 742-748.

Salem Mohamed Serageldin. (2018). Effects of metallurgical parameters on the development of residual stresses in Al-Si alloys used in engine block manufacturing. Thèse de doctorat, Université du Québec à Chicoutimi.

Saliha Boudraa, Fadila Benabed, Issouf Fofana et Leila Mokhnache. (2022). FTIR and FDS assessment of mineral oil under low electrical discharge. Diagnostyka, 23, (2), p. 1-7.

Salsabili Mohammad. (2022). Development of a probabilistic method in seismic microzonation mapping accounting for uncertainties of the 3D geological model and geotechnical soil parameters. Thèse de doctorat, Université du Québec à Chicoutimi.

Samad Abdallah, Morency François et Volat Christophe. (2018). A numerical model of the blade element momentum theory for rotating airfoils with heat transfer calculation. 2018 Joint Thermophysics and Heat Transfer Conference, 2018,

Samad Abdallah, Tagawa Gitsuzo B., Morency François et Volat Christophe. (2020). Predicting rotor heat transfer using the viscous blade element momentum theory and unsteady vortex lattice method. Aerospace, 7, (7), p. 90.

Samad Abdallah, Villeneuve Éric, Morency François et Volat Christophe. (2021). A numerical and experimental investigation of the convective heat transfer on a small helicopter rotor test setup. Aerospace, 8, (2), p. 53.

Sanogo Bazoumana, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Côté Jules. (2021). Determination of optimum vibro-compaction time using sound analysis. Journal of Manufacturing Processes, 68, (Part B), p. 118-125.

Saoudi Abdelhamid. (2001). Effet du taux de refroidissement, de la surchauffe et d'un mélange des métaux terres rares (mischmetal) sur la microstructure et les propriétés mécaniques des alliages aluminium silicium de type 319.2. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Coulombe Patrick. (2017). Prediction of contact angle of coke-pitch system from raw material properties using artificial neural network. International Journal of Engineering Inventions, 6, (4), p. 42-52.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Coulombe Patrick. (2016). Effect of coke granulometry on the properties of carbon anodes based on experimental study and ANN analysis. Journal of Materials Science Research, 5, (4), p. 63-78.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Lagacé Charles-Luc. (2014). Determination of contact angle from raw material properties using linear multivariable analysis. Light Metals, p. 1099-1104.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Pouliot Martin. Characterization of petroleum coke and butts used in anode manufacturing in aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sarkar Dilip K. et Morais Brigitte. (2016). Effect of crystallinity on the wettability of petroleum coke by coal tar pitch. Energy & Fuels, 30, (4), p. 3549-3558.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Dilip K., Bhattacharyay Dipankar, Morais Brigitte et Chabot Jérôme. (2014). Coke–pitch interactions during anode preparation. Fuel, 117, (part A), p. 598-607.

Sarkar Dilip K. et Farzaneh Masoud. (2008). Fabrication of PECVD-grown fluorinated hydrocarbon nanoparticles and circular nanoring arrays using nanosphere lithography. Applied Surface Science, 254, (13), p. 3758-3761.

Sarkar Dilip K. et Farzaneh Masoud. (2009). Superhydrophobic coatings with reduced ice adhesion. Journal of Adhesion Science and Technology, 23, p. 1215-1237.

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2008). Superhydrophobic properties of ultrathin rf-sputtered Teflon films coated etched aluminum surfaces. Materials Letters, 62, (8-9), p. 1226-1229.

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2010). Wetting and superhydrophobic properties of PECVD grown hydrocarbon and fluorinated-hydrocarbon coatings. Applied Surface Science, 256, (11), p. 3698-3701.

Sarkar Dilip K. et Noormohammed Saleema. (2021). Special issue “Anti-icing coatings and surfaces”. Coatings, 11, (8), p. 955.

Sarkar Dilip K. et Paynter Royston W.. (2010). One-Step Deposition Process to Obtain Nanostructured Superhydrophobic Thin Films by Galvanic Exchange Reactions. Journal of Adhesion Science and Technology, 24, (6), p. 1181-1189.

Sarkar Dilip K. et Saleema Noormohammed. (2010). One-step fabrication process of superhydrophobic green coatings. Surface and Coatings Technology, 204, (15), p. 2483-2486.

Sékongo Beki, Brettschneider Stephan, Rao U. Mohan, Fofana Issouf, Jabbari Marouane, Picher Patrick et Yeo Zie. (2022). Pre-Breakdown and Breakdown Behavior of Synthetic and Natural Ester Liquids under AC Stress. Energies, 15, (1), p. 167.

Shakeri H. R., Rahem Ahmed, Worswick M. J. et Mayer Robert. (2006). Failure mechanism and damage characterization in axially crushed AlMg3.5Mn aluminium tubes. Dans : The 45th International Conference of Metallurgists (COM 2006) , October 1-4, 2006, Montréal, Québec.

Shakiba Mohammad. (2015). Effect of homogenization and alloying elements on hot deformation behaviour of 1XXX series aluminum alloys = Effet des éléments d'alliage et d'homogénéisation sur le comportement à la déformation à chaud des alliages d'aluminium de la série 1XXX. Thèse de doctorat, Université du Québec à Chicoutimi.

Shakiba Mohammad, Parson Nick et Chen X-Grant. (2016). Modeling the Effects of Cu content and deformation variables on the high-temperature flow behavior of dilute Al-Fe-Si alloys using an artificial neural network. Materials, 9, (7), p. 536.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2021). Icephobic properties of aqueous self-lubricating coatings containing PEG-PDMS copolymers. Progress in Organic Coatings, 161, e106466.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2022). An intelligent icephobic coating based on encapsulated phase change materials (PCM). Colloids and Surfaces A: Physicochemical and Engineering Aspects, 655, e130157.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2023). A novel hybrid anti-icing surface combining an aqueous self-lubricating coating and phase-change materials. Progress in Organic Coatings, 177, e107414.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2021). Potential use of smart coatings for icephobic applications: A review. Surface and Coatings Technology, 424, e127656.

Shamshiri Mohammadreza, Momen Gelareh et Jafari Reza. (2024). Icephobic coatings beyond boundaries: Layered integration of phase change materials beneath a PEG-PDMS copolymer–containing coating to enhance anti-icing performance. Progress in Organic Coatings, 189, e108324.

Shen Peng. (2012). The effects of heat treatment on the microstructure and mechanical properties of the AA2618 DC cast plate. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Shi Cangji. (2010). Investigation and characterization of fluidity and microstructure of recycled AL-B4C materials. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Shi Cangji. (2014). Effects of Zr and V on microstructure and hot deformation behavior of 7150 aluminum alloys. Thèse de doctorat, Université du Québec à Chicoutimi.

Shi Cangji et Chen X-Grant. (2016). Evolution of activation energies for hot deformation of 7150 aluminum alloys with various Zr and V additions. Materials Science and Engineering: A, 650, p. 197-209.

Shi Cangji, Lai Jing et Chen X-Grant. (2014). Microstructural evolution and dynamic softening mechanisms of Al-Zn-Mg-Cu alloy during hot compressive deformation. Materials, 7, (1), p. 244-264.

Shirandasht Jamshid. (2005). Évaluation de la technique LiMCA II pour la mesure d'inclusions dans l'aluminium pur et l'alliage binaire Al-6%Si : rôle de la température de coulée. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). Electrochemical synthesis of highly ordered polypyrrole on copper modified aluminium substrates. Applied Surface Science, 307, p. 589-592.

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). A versatile cost-effective and one step process to engineer ZnO superhydrophobic surfaces on Al substrate. Applied surface science, 311, p. 182-188.

Simard Guy. (1992). La modélisation de la combustion dans un four de calcination de coke de pétrole. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Snaiki Reda, Jamali Abdeslan, Rahem Ahmed, Shabani Mehdi et Barjenbruch Brian L.. (2024). A metaheuristic-optimization-based neural network for icing prediction on transmission lines. Cold Regions Science and Technology, 224, e104249.

Soares Bravo Alencar. (2017). Étude de l’endommagement thermomécanique des pièces en bioplastiques et composites de fibres naturelles : application aux engrenages. Thèse de doctorat, Université du Québec à Chicoutimi.

Sobhani Sarah, Bakhshandeh Ehsan, Jafari Reza et Momen Gelareh. (2023). Mechanical properties, icephobicity, and durability assessment of HT-PDMS nanocomposites: Effectiveness of sol–gel silica precipitation content. Journal of Sol-Gel Science and Technology, 105, (2), p. 1-12.

Sobhani Sarah, Munger Frédérick et Momen Gelareh. (2023). Reinforced PDMS elastomer nanocomposites: effectiveness of in-situ nano-silica content on flashover voltage and treeing phenomena. IEEE Transactions on Dielectrics and Electrical Insulation, 30, (5), p. 2158-2164.

Sodoké Kossi. (2017). Évaluation du comportement à long terme d’un matériau composite à fibres naturelles. Thèse de doctorat, Université du Québec à Chicoutimi.

Sun Hang, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Côté Jules et Coulombe Patrick. (2019). Colorimetric methods for determining Fe, V, and Ni contents in coke and anodes. Chemical Engineering Technology, 42, (5), p. 1011-1017.

T

Tahiri Hicham. (2007). Affinement des grains des alliages Al-(0-17%)Si. Thèse de doctorat, Université du Québec à Chicoutimi.

Tahiri Hicham. (2003). Les effets des paramètres métallurgiques sur les caractéristiques des intermétalliques de fer et sur la phase silicium eutectique dans les alliages Al-Si-Cu (319). Mémoire de maîtrise, Université du Québec à Chicoutimi.

Takoufack Taguessong Berti Chilton. (2024). Développements de nouveaux matériaux d’électrode pour supercondensateur : cas des composés de cuivre et des minerais de fer. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tash Mahmoud. (2005). Effect [sic] des paramètres métallurgiques sur le comportement d'usinage des alliages 356 et 319 (étude de forage et de taraudage). Thèse de doctorat, Université du Québec à Chicoutimi.

Tatoulian Michael, Gallino Enrico, Jafari Reza, Arefi-Khonsari Farzaneh, Tatoulian L., Borra Jean Pascal, Lewis François et Mantovani Diego. (2007). Plasma and Electrospray Deposition to Improve the Biocompatibility of Stents. Materials science forum, 539-543, p. 529-534.

Tebib Mehand. (2012). Rheological behavior and microstructural evolution of semi-solid hypereutectic Al-Si-Mg-Cu alloys using rheoforming process. Thèse de doctorat, Université du Québec à Chicoutimi.

Thibault Marc-André. (1984). Modèle dynamique du four de cuisson d'anodes. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Thomas Roger, Fraser Kirk A., Kiss László, Poncsák Sándor, Guérard Sébastien, Bilodeau Jean-François et Bonneau G.. (2020). Development of a mathematical model to simulate raft formation. Light Metals, 2020, p. 688-695.

Tinguery Kenza Marianne Sipereh. (2023). Fatigue des joints soudés par friction-malaxage dans les tabliers de ponts en aluminium d’alliage AA6061-T6. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tirupati Naidu Gottapu, Ungarala Mohan Rao et Suresh Sudabattula. (2022). Influence of Ester Liquids on Dielectric Strength of Cellulose Kraft Paper. Energies, 15, (3), p. 762.

Tiwari Mani Mohan. (2024). Studies of surface preparation and structural adhesive bonding of aluminum and other materials. Thèse de doctorat, Université du Québec à Chicoutimi.

Tông T.V.K, Louchez P. R. et Zouzou A.. (1997). Introductory analysis of draining and freezing of de-icing fluids. Cold Regions Science and Technology, 25, (3), p. 207-214.

Tremblay David-Alexandre. (2009). Caractérisation de la mouillabilité dynamique et du transfert de chaleur lors de l'inititiation de la solidification de l'aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tremblay François. (1987). Cinétique de dégagement des matières volatiles lors de la pyrolyse d'électrodes de carbone industrielles. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tremblay Jocelyn. (1986). Simulation d'un bain de métal en fusion avec convection naturelle. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tremblay Francis. (2019). Évaluation d’une méthode de prédiction de l’usure des outils utilisés dans le soudage par friction-malaxage en recouvrement dans des assemblages dissimilaires aluminium et acier. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tremblay Marc Mario. (2010). 2010 Ballot Update of AS5901 B. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2010, Montréal, Québec.

Tremblay Marc Mario. (2017). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , 30 Octobre 2017, Montréal, Québec.

Tremblay Marc Mario. (2016). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , 31 octobre 2016, Montréal, Québec.

Tremblay Marc Mario. (2016). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2016, Savannah, GA.

Tremblay Marc Mario. (2015). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , November 2015, Montréal, Québec.

Tremblay Marc Mario. (2007). AS5901 Proposed Revisions. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2007, San Diego, CA.

Tremblay Marc Mario. (2010). AS5901 revision B 2010 ballot. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2010, Berlin, Allemagne.

Tremblay Marc Mario. (2011). AS5901 standard 2010 ballot revision B last update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2011, San Francisco, CA.

Tremblay Marc Mario. (2009). AS5901 standard next revision. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2009, Charleston, South Carolina.

Tremblay Marc Mario. (2008). AS5901 standard next revision. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2008, Montréal, Québec.

Tremblay Marc Mario. (2013). AS5901 standard potential changes for revision C. Dans : SAE G-12 ADF Subcommittee Meeting , May 2013, New Orleans, Louisiana.

Tremblay Marc Mario. (2009). AS5901 standard revision B status. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2009, Montréal, Québec.

Tremblay Marc Mario. (2012). AS5901 standard revision C. Dans : SAE G-12 ADF Subcommittee Meeting , October 2012, Montréal, Québec.

Tremblay Marc Mario. (2011). AS5901 Standard Status. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2011, Montréal, Québec.

Tremblay Marc Mario. (2012). AS5901 standard status of next revision C. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2012, Prague, République tchèque.

Tremblay Marc Mario. (2008). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2008, Warsaw, Poland.

Tremblay Marc Mario. (2008). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2008, Montréal, Québec.

Tremblay Marc Mario. (2007). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2007, Montreal, Québec.

Tremblay Marc Mario. (2007). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2007, Montréal, Québec.

Tremblay Marc Mario. (2013). AS5901 standard update potential changes. Dans : SAE G-12 Fluids Subcommittee Meeting , October 2013, Montréal, Québec.

Tremblay Marc Mario. (2014). Ballot summary of AS5901C standard. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2014, Madrid, Spain.

Tremblay Marc Mario. (2015). Brief update of aerospace standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2015, Vancouver, BC.

Tremblay Marc Mario. (2017). Brief update of the aerospace document AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2017, Athens, Greece.

Tremblay Marc Mario. (2008). Testing of runway deicing fluids. Dans : SAE G-12 Fluids Subcommittee Meeting , May 14, 2008, Warsaw, Poland.

Tremblay Marc Mario. (2014). Update of AS5901C standard and publication. Dans : SAE G-12 Fluids Subcommittee Meeting , October 2014, Montréal, Québec.

Tremblay Marc Mario. (2014). Update of the Performance Test Methods for AMS1431/1435 Runway De/Anti-icing Chemicals. Dans : SAE G-12 RDF Subcommittee Meeting, May 2014 , Madrid, Spain.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2017). AIR performance test methods status of revision A, update of RDPWG works & the way forward. Dans : SAE G-12 RDF Subcommittee Meeting , May 2017, Athens, Greece.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2016). Update of 2016 ballots AIR performance test methods. Dans : SAE G-12 RDF Subcommittee Meeting , November 2016, Montréal, Québec.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2015). Update of AIR performance test methods for AMS1431/AMS1435 runways and taxiways de/anti-icing chemicals. Dans : SAE G-12 RDF Subcommittee Meeting , November 2015, Montréal, Québec.

Tremblay Sarah-Eve. (2017). Développement d’un montage simulant l’érosion par la pluie pour l’évaluation des revêtements glaciophobes dans le domaine aérospatial. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Tremblay Simon-Olivier. (2019). Étude conceptuelle et développement d'un nouvel assemblage anodique. Thèse de doctorat, Université du Québec à Chicoutimi.

Tremblay Simon-Olivier, Marceau Daniel, Coulombe Patrick, Côté Julie et Kocaefe Duygu. (2018). Numerical investigation of the thermomechanical behaviour of anode butt. Light Metals, 2018, p. 1403-1412.

Tremblay Simon-Olivier, Marceau Daniel, Kocaefe Duygu et Lagacé Charles-Luc. (2015). Development of a new approach to increase the electrical performance of anodic assemblies. Light Metals, p. 1175-1180.

U

Ungarala Mohan Rao, Fofana Issouf et Loiselle Luc. (2021). Behavior of Ester Liquids Under Various Operating Fault Conditions. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 305-320). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

Ungarala Mohan Rao, Fofana Issouf, Loiselle Luc et Jayasree T.. (2021). End Life Behavior of Ester Liquids in High-Voltage Transformers. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 127-146). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

Ungarala Mohan Rao, Fofana Issouf et Picher Patrick. (2022). Decay Particles and Regeneration of Ester Dielectric Liquids A Challenge! Transformer Technology Mag, (17),

Ungarala Mohan Rao, Fofana Issouf, Rajesh K. N. V. P. S. et Picher Patrick. (2021). Identification and application of machine learning algorithms for transformer dissolved gas analysis. IEEE Transactions on Dielectrics and Electrical Insulation, 28, (5), p. 1828-1835.

Ungarala Mohan Rao, Fofana Issouf et Rodriguez Celis E.. (2021). Liquid Insulation for Power Transformers. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 1-9). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

V

Varennes Emmanuel de. (2012). Cinétique de dissolution de l'alumine : étude expérimentale de l'injection. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Vazirinasab E., Maghsoudi Khosrow, Jafari Reza et Momen Gelareh. (2020). A comparative study of the icephobic and self-cleaning properties of Teflon materials having different surface morphologies. Journal of Materials Processing Technology, 276, p. 116415.

Vazirinasab Elham. (2020). Superhydrophobic silicone-based nanocomposites for application to high voltage insulator. Thèse de doctorat, Université du Québec à Chicoutimi.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Application of superhydrophobic coatings as a corrosion barrier : a review. Surface and Coatings Technology, 341, p. 40-56.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Développement de surfaces superhydrophobes utilisant un jet de plasma à pression atmosphérique. Dans : 86e Congrès de l'ACFAS , 7-11 May 2018, Saguenay, Québec.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2019). Evaluation of atmospheric-pressure plasma parameters to achieve superhydrophobic and self-cleaning HTV silicone rubber surfaces via a single-step, eco-friendly approach. Surface and Coatings Technology, 375, p. 100-111.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Simple fabrication of superhydrophobic surfaces using atmospheric-pressure plasma. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, ). Switzerland : Materials Science Forum.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Wetting and self-cleaning properties of silicone rubber surfaces by atmospheric plasma jet. Dans : 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 21-24 Oct. 2018, Cancun, Mexico.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Wetting and Self-Cleaning Properties of Silicone Rubber Surfaces Treated by Atmospheric Plasma Jet. Dans 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). (p. 239-242). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Vazirinasab Elham, Jafari Reza, Momen Gelareh et Carreira Tony. (2018). Simple fabrication of superhydrophobic surfaces using atmospheric-pressure plasma.

Vazirinasab Elham, Maghsoudi Khosrow, Momen Gelareh et Jafari Reza. (2022). On the icephobicity of damage-tolerant superhydrophobic bulk nanocomposites. Soft Matter, 18, (2), p. 412-424.

Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2021). A non-fluorinated mechanochemically robust volumetric superhydrophobic nanocomposite. Journal of Materials Science & Technology, 66, p. 213-225.

Vékony Klára. (2009). Large bubble moving under a solid surface. Thèse de doctorat, Université du Québec à Chicoutimi.

Villemure Félix-Antoine, Fiset Mathieu, Bastien Josée, Mitchell Denis et Fournier Benoit. (2019). Behavior of epoxy bonded bars in concrete affected by alkali-silica reaction. ACI Materials Journal, 116, (6), p. 179-191.

Villemure Félix-Antoine, Fiset Mathieu, Bastien Josée, Mitchell Denis, Fournier Benoît et Bissonnette Benoît. (2016). Study of bond between epoxy, steel reinforcing bars and concrete affected by alkali-silica reaction. Dans : 15th International Conference on Alkali-Aggregate Reaction , July 03th - 07th, 2016, São Paulo, Brazil.

Villeneuve Carl. (1998). Neutralisation et dissolution des intermétalliques de fer dans les alliages Al-Si. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Villeneuve Éric. (2017). AS5900 Standard Update. Dans : SAE G12 Fluids Subcommittee Meeting , 2017, Montréal, Québec.

Villeneuve Éric. (2017). AS5900 Standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2017, Athens, Greece.

Villeneuve Éric. (2016). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2016, Montréal, Québec.

Villeneuve Éric. (2016). AS5900 Standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2016, Savannah, GA.

Villeneuve Éric. (2015). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2015, Montréal, Québec.

Villeneuve Éric. (2014). AS5900 Standard Update. Dans : SAE G-12 AWG Subcommittee Meeting , October 2014, Montréal, Québec.

Villeneuve Éric. (2014). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2014, Madrid, Spain.

Villeneuve Éric. (2013). AS5900 standard update potential changes. Dans : SAE G-12 Fluids Subcommittee Meeting , 2013, Montréal, Québec.

Villeneuve Éric. (2013). Brief update of AS5900. Dans : SAE G-12 ADF Subcommittee Meeting , May 2013, New Orleans, Louisiana.

Villeneuve Eric. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft. Thèse de doctorat, Université du Québec à Chicoutimi.

Villeneuve Éric. (2012). Short update of AS5900. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2012, Prague, République Tchèque.

Villeneuve Éric, Blackburn Caroline et Volat Christophe. (2021). Design and development of an experimental setup of electrically powered spinning rotor blades in icing wind tunnel and preliminary testing with surface coatings as hybrid protection solution. Aerospace, 8, (4), p. 98-117.

Villeneuve Éric, Brassard Jean-Denis et Momen Gelareh. (2024). Automated snow intensity measurement (ASIM). Results in Engineering, 21, e101812.

Villeneuve Eric, Charpentier Claire, Brassard Jean-Denis, Momen Gelareh et Lacroix Antoine. (2022). Aircraft Anti-Icing Fluids Endurance Under Natural and Artificial Snow: a Comparative Study. International Review of Aerospace Engineering (IREASE), 15, (1), p. 1-11.

Villeneuve Éric, Harvey Derek, Aubert Roger J., Perron Jean et Zimcik David. Piezoelectric de-icing system for rotorcraft. Dans : 70th American Helicopter Society International annual forum 2014 , 20-22 May 2014, Montreal, Quebec.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 1/3 : development of a flat plate numerical model with experimental validation. Aerospace, 7, (5), p. 62-88.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 2/3 : investigation of transient vibration during frequency sweeps and pptimal piezoelectric actuator excitation. Aerospace, 7, (5), p. 49-69.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 3/3 : numerical model and experimental validation of vibration-based de-icing of a flat plate structure. Aerospace, 7, (5), p. 54.

W

Wang Shuai. (2022). Thermo-mechanical fatigue behaviors of Al-Si 319 and 356 cast alloys and the influence of Mo on their evolution. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Wang Zimeng. (2023). Evolution of microstructure and mechanical properties during elevated-temperature thermal exposure with Si and transition elements additions in Al-Cu 224 alloys. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Westermaier Martin, Williamson Kelvin et Tremblay Marc Mario. (2013). Performance test methods for AMS1431/1435 runway de/anti-icing chemicals. Dans : SAE G-12 RDF Subcommittee Meeting , October 2013, Montréal, Québec.

Williams B. W., Worswick M. J., D'Amours Guillaume, Rahem Ahmed et Mayer Robert. (2010). Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes. International Journal of Impact Engineering, 37, (10), p. 1008-1020.

Wong David, Welch Barry, Nunez Pernelle, Dion Lukas et Spirin Alexey. (2019). Latest progress in IPCC methodology for estimating the extend of PFC greenhouse gases co-evolved in the aluminium reduction cells and challenges in reducing these emissions. Dans : 37th International Conference and Exhibition of ICSOBA , 16 to 20 September 2019, Krasnoyarsk, Russia.

Wu Weili. (2003). The modeling of hot tearing in aluminium alloy. Mémoire de maîtrise, Université du Québec à Chicoutimi.

X

Xie Yadian. (2012). Correlation between anode manufacturing process and anode reactivity for CHALCO plant in Guizhou, China. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xie Yadian. (2017). Study on high-purity alumina preparation and its applications. Thèse de doctorat, Université du Québec à Chicoutimi.

Xie Yadian, Kocaefe Duygu, Chen Chunying et Kocaefe Yasar S.. (2016). Review of research on template methods in preparation of nanomaterials. Journal of Nanomaterials, p. 1-10.

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S., Cheng Johnathan et Liu Wei. (2016). The effect of novel synthetic methods and parameters control on morphology of nano-alumina particles. Nanoscale Research Letters, 11, (259),

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S. et Wei Liu. (2013). Correlation between anode recipe and anode properties. International Journal of Engineering and Innovative Technology, 2, (8), p. 23-27.

Xie Yadian, Kocaefe Duygu et Liu Wei. Novel method for extracting ultra high purity alumina from wastewater. .

Xiong Jiawei. (2016). Durable nanostructured superhydrophobic coatings on aluminum alloy substrates. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Superhydrophobic honeycomb-like cobalt stearate thin films on aluminum with excellent anti-corrosion properties. Applied surface science, 407, p. 361-370.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Ultraviolet-durable superhydrophobic nanocomposite thin films based on cobalt stearate-coated TiO2 nanoparticles combined with polymethylhydrosiloxane. ACS Omega, 2, (11), p. 8198-8204.

Xu Na, Sarkar Dilip K., Chen X-Grant et Tong Weiping. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, p. 173-184.

Xu Na, Sarkar Dilip K., Grant Chen X., Zhang Hui et Tong Weiping. (2016). Superhydrophobic copper stearate/copper oxide thin films by a simple one-step electrochemical process and their corrosion resistance properties. RSC Advances, 6, (42), p. 35466-35478.

Xu Wei. (2018). Synthèse et caractérisation des revêtements superhydrophobes à base d’aluminium pour une protection active contre la corrosion des substrats métalliques. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Xu Wei, Rajan Karthikeyan, Chen X-Grant et Sarkar Dilip K.. (2019). Facile electrodeposition of superhydrophobic aluminum stearate thin films on copper substrates for active corrosion protection. Surface & Coatings Technology,

Y

Yang Deyu. (2006). Rôle d'addition de magnésium sur l'occurence de la fonte naissante dans les alliages expérimentaux et commerciaux Al-Si-Cu et son influence sur la microstructure et les propriétés de traction de l'alliage = Role of magnesium addition on the occurence of incipient melting in experimental and commercial Al-Si-Cu alloys and its influence on the alloy microstructure and tensile properties. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Z

Zaki Gergis Adel Shaker. (2014). On the performance of low pressure die-cast Al-Cu based automotive alloys : role of additives. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Zedan Yasser. (2010). Machinability aspects of heat-treated Al-(6-11)%Si cast alloys : role of intermetallics and free-cutting elements. Thèse de doctorat, Université du Québec à Chicoutimi.

Zhang Lin. (1996). A kinetic study of hydrogen absorption and degassing behaviour of Duralcan composites. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Zhang Zhan, Arici Anil, Breton Francis et Chen X-Grant. (2023). Influence of transition elements (Zr, V, and Mo) on microstructure and tensile properties of AlSi8Mg casting alloys. Canadian Metallurgical Quarterly, p. 1-10.

Zhao Qinfu. (2016). Study on the rheoformability of semisolid 7075 wrought aluminum alloy using SEED process. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Zheng Chang Qing. (2009). Étude et évaluation des procédés de fabrication des pièces de suspension d'automobile en alliage d'aluminium. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Zouzou Nichet Alexandre. (1996). Modélisation de la congélation d'un film fluide soumis à une précipitation surfondue. Mémoire de maîtrise, Université du Québec à Chicoutimi.

Ö

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2018). Modification of petroleum coke by different additives and the impact on anode properties. Canadian Journal of Chemical Engineering, 96, (8), p. 1707-1712.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2018). Modification of coke by different additives to improve anode properties. Fuel, 211, p. 102-109.