Constellation, le dépôt institutionnel de l'Université du Québec à Chicoutimi

Article publié dans une revue avec comité d'évaluation

Abi Attoumane, Walter Julien, Saeidi Ali et Chesnaux Romain. (2022). A cluster-based multiparametric similarity test for the compartmentalization of crystalline rocks into structural domains. Quarterly Journal of Engineering Geology and Hydrogeology,

Adekunle Andrew Adewunmi, Fofana Issouf, Picher Patrick, Rodriguez-Celis Esperanza Mariela et Arroyo-Fernandez Oscar Henry. (2024). Analyzing Transformer Insulation Paper Prognostics and Health Management: A Modeling Framework Perspective. IEEE Access, 12, p. 58349-58377.

Adekunle Andrew Adewunmi, Oparanti Samson Okikiola et Fofana Issouf. (2023). Performance Assessment of Cellulose Paper Impregnated in Nanofluid for Power Transformer Insulation Application: A review. Energies, 16, (4),

Adja Akré Anne Simone, Sobhani Sarah, Momen Gelareh, Fofana Issouf et Carrière Julie. (2023). Step by step progress to achieve an icephobic silicone‐epoxy hybrid coating: Tailoring matrix composition and additives. Journal of Applied Polymer Science, 140, (32), e54262.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2022). Anodized aluminum surface with topography-mediated antibacterial properties. ACS Biomaterials Science & Engineering, 8, (3), p. 1087-1095.

Agbe Henry, Sarkar Dilip K. et Chen X-Grant. (2021). Electrochemically synthesized silver phosphate coating on anodized aluminum with superior antibacterial properties. Surface and Coatings Technology, 428, e127892.

Agbe Henry, Sarkar Dilip K., Chen X-Grant et Dodoo-Arhin David. (2022). Silver–polymethylhydrosiloxane–quaternary ammonium coating on anodized aluminum with excellent antibacterial property. ACS Applied Bio Materials, 5, (10), p. 4760-4769.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver–polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Agbe Henry, Sarkar Dilip K., Chen X-Grant, Faucheux Nathalie, Soucy Gervais et Bernier Jean-Luc. (2020). Silver−polymethylhydrosiloxane nanocomposite coating on anodized aluminum with superhydrophobic and antibacterial properties. ACS Applied Bio Materials, 3, (7), p. 4062-4073.

Ahmed Hassan Yousif, Zeghid Medien, Imtiaz Waqas A., Sharma Teena et Chehri Abdellah. (2020). An efficient 2D encoding/decoding technique for optical communication system based on permutation vectors theory. Multimedia Systems,

Ahmed Hassan Yousif, Zeghid Medien, Imtiaz Waqas A., Sharma Teena, Chehri Abdellah et Fortier Paul. (2020). Two-dimensional permutation vectors’ (PV) code for optical code division multiple access systems. Entropy, 22, (5), p. 576.

Ahmed Imran, Jeon Gwanggil, Chehri Abdellah et Hassan Mohammad Mehedi. (2021). Adapting Gaussian YOLOv3 with transfer learning for overhead view human detection in smart cities and societies. Sustainable Cities and Society, 70, e102908.

Ahmed Mohamed, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2023). Welding of AA6061-T6 Sheets Using High-Strength 4xxx Fillers: Effect of Mg on Mechanical and Fatigue Properties. Materials, 16, (10), e3832.

Ahmed Mohamed, Javidani Mousa, Mirakhorli Fatemeh, Maltais Alexandre et Chen X-Grant. (2022). Developing High-Strength Al-Si-Mg Filler Metals for Aluminum Fusion Welding. Journal of Materials Engineering and Performance,

Akbari Ali Akbar, Setayeshmehr Alireza, Borsi H., Gockenbach E. et Fofana Issouf. (2010). Intelligent agent-based system using dissolved gas analysis to detect incipient faults in power transformers. IEEE Electrical Insulation Magazine, 26, (6), p. 27-40.

Akitegetse Cléophace, Volat Christophe et Farzaneh Masoud. (2008). Measuring bending stress on an ice/aluminium composite beam interface using an embedded piezoelectric PVDF (polyvinylidene-fluoride) film sensor. Measurement Science and Technology, 19, (6), e065703.

Akkal Hatim, Volat Christophe et Farzaneh Masoud. (2013). Improving electrical performance of EHV post station insulators under severe icing conditions using modified grading rings. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (1), p. 221-228.

Alameh Abdul Hafiz, Gratuze Mathieu, Robichaud Alexandre et Nabki Frederic. (2018). Study and design of MEMS cross-shaped piezoelectric vibration energy harvesters. 25th IEEE International Conference on Electronics, Circuits and Systems (ICECS), 2018, (18420438), p. 305-308.

Alarie Jonathan, Roger Thomas, Kiss László, Poncsák Sándor, Guérard Sébastien et Bilodeau Jean-François. (2020). Validation of the gravimetric method to properly follow alumina dissolution in cryolitic bath. Light Metals, 2020, p. 680-687.

Algendy Ahmed Y., Javidani Mousa, Khangholi Siamak Nikzad, Pan Lei et Chen X.-Grant. (2023). Enhanced Mechanical Strength and Electrical Conductivity of Al–Ni‐Based Conductor Cast Alloys Containing Mg and Si. Advanced Engineering Materials, e2301241.

Algendy Ahmed Y., Liu Kun et Chen X-Grant. (2021). Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy. Materials Characterization, 181, e111487.

Algendy Ahmed Y., Liu Kun et Chen X-Grant. (2020). Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels. MATEC Web of Conferences, 326, e02002.

Algendy Ahmed Y., Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2022). Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys. Materials Science and Engineering: A, 855, e143950.

Algendy Ahmed Y., Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2022). Evolution of discontinuous/continuous Al3(Sc,Zr) precipitation in Al-Mg-Mn 5083 alloy during thermomechanical process and its impact on tensile properties. Materials Characterization, 192, e112241.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2022). Development of a dual capsule self-healing silicone composite using silicone chemistry and poly(melamine-urea-formaldehyde) shells. Journal of Applied Polymer Science, 139, (8), e51670.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2023). Room-temperature microcapsule-based self-healing and fluorine-free superhydrophobic coating. Materials Today Communications, 34, e105087.

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2022). Transparent non-fluorinated superhydrophobic coating with enhanced anti-icing performance. Progress in Organic Coatings, 165, e106758.

Allahdini Anahita, Momen Gelareh, Munger Frédérick, Brettschneider Stephan, Fofana Issouf et Jafari Reza. (2022). Performance of a nanotextured superhydrophobic coating developed for high-voltage outdoor porcelain insulators. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 649, e129461.

Amara Belkacem, Faouzi Fatima-Ezzahra, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2021). Modification of biocoke destined for the fabrication of anodes used in primary aluminum production. Fuel, 304, e121352.

Amara Belkacem, Kocaefe Duygu, Kocaefe Yasar, Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2022). Partial Replacement of Petroleum Coke with Modified Biocoke during Production of Anodes Used in the Aluminum Industry: Effect of Additive Type. Applied Sciences, 12, (7), e3426.

Amirkhan F., Robichaud Alexandre, Ropagnol X., Gratuze M., Ozaki T., Nabki Frederic et Blanchard F.. (2020). Active terahertz time differentiator using piezoelectric micromachined ultrasonic transducer array. Optics Letters, 45, (13), p. 3589-3592.

Amrani M.L., Bouazabia S., Fofana Issouf, Meghnefi Fethi et Jabbari Marouane. (2019). Modified Peek formula for calculating positive DC corona inception voltage on polluted insulator. Electrical Engineering, 101, p. 489-498.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Effect of carbon anode production parameters on anode cracking. SN Applied Sciences, 3,

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Côté Jules. (2021). Study on the cracking of carbon anodes used in aluminium industry. The Canadian Journal of Chemical Engineering, p. 1-12.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Coulombe Patrick. (2017). Evolution of anode properties during baking. International Journal of Innovative Science, Engineering & Technology, 4, (4), p. 301-309.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Bouazara Mohamed et Morais Brigitte. (2016). Characterization of cracking mechanisms of carbon anodes used in aluminum industry by optical microscopy and tomography. Journal of Materials Engineering and Performance, 25, (10), p. 4274-4282.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Blaney Gerry. (2014). Effect of heating rate on the crack formation during baking in carbon anodes used in aluminum industry. Light Metals, p. 1175-1180.

Andoh Marc Alain, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Marceau Daniel et Morais Brigitte. (2016). Measurement of the electric current distribution in an anode. Light Metals, p. 889-894.

Anisetti Marco, Bellandi Valerio, Chehri Abdellah, Qian Yurong et Jeon Gwanggil. (2016). Embedded systems for mobile sensors. Journal of Sensors, 2016, e8312032.

Arakelian V. G. et Fofana Issouf. (2007). Water in oil-filled high-voltage equipment part II: water content as physicochemical tools for insulation condition diagnostic. IEEE Electrical Insulation Magazine, 23, (5), p. 15-24.

Arakelian V.G. et Fofana Issouf. (2007). Water in oil filled high voltage equipment, part I : states, solubility and equilibrium in insulating materials. IEEE Electrical Insulation Magazine, 23, (4), p. 15-27.

Arakellian V.G. et Fofana Issouf. (2009). Physicochemical aspects of gassing of insulating liquids under electrical stress. IEEE Electrical Insulation Magazine, 25, (3), p. 43-51.

Arianpour Faranak, Farhadi Shahram, Farzaneh Masoud et Jafari Reza. (2017). Erratum to: Effect of heterogeneity on hydro/ice-phobic properties of alkylsilane/fluoro-alkylsilane-based coatings on Al substrates. Journal of Caotings Technology and Research, 14, (1), p. 277.

Arianpour Faranak, Farzaneh Masoud et Jafari Reza. (2016). Hydrophobic and ice-phobic properties of self-assembled monolayers (SAMs) coatings on AA6061. Progress in Organic Coatings, 93, p. 41-45.

Arroyo Fernandez Oscar Henry, Fofana Issouf, Jalbert Jocelyn, Gagnon Sylvie, Rodriguez-Celis Esperanza, Duchesne Steve et Ryadi Mohamed. (2018). Aging characterization of electrical insulation papers impregnated with synthetic ester and mineral oil : correlations between mechanical properties, depolymerization and some chemical markers. IEEE Transactions on Dielectrics and Electrical Insulation, 25, (1), p. 217-227.

Arroyo Fernandez Oscar Henry, Fofana Issouf, Jalbert Jocelyn, Rodriguez Esperanza, Rodriguez Lidia et Ryadi Mohamed. (2017). Assessing Changes in Thermally Upgraded Papers with Different Nitrogen Contents under Accelerated Aging. IEEE Transactions on Dielectrics and Electrical Insulation, 24, (3), p. 1829-1839.

Arroyo Fernandez Oscar Henry, Jalbert Jocelyn, Fofana Issouf et Ryadi Mohamed. (2017). Temperature dependence of methanol and tensile strength of insulation paper: Kinetics of the changes of mechanical properties during ageing. Cellulose, 24, (2), p. 1031-1039.

Arroyo Fernandez Oscar Henry, Jalbert Jocelyn, Rodriguez-Celis Esperanza, Duchesne Steve, Morin Brigitte et Fofana Issouf. (2020). Changes in mechanical properties of impregnated Nomex papers 410 and 910 during accelerated aging. Polymer Testing, 83, (106358), p. 1-13.

Arshad Dr., Momen Gelareh, Farzaneh Masoud et Nekahi Azam. (2017). Properties and applications of superhydrophobic coatings in high voltage outdoor insulation: A review. IEEE Transactions on Dielectrics and Electrical Insulation, 24, (6), p. 3630-3646.

Ashoka S., Saleema Noormohammed et Sarkar Dilip K.. (2017). Tuning of superhydrophobic to hydrophilic surface : a facile one step electrochemical approach. Journal of Alloys and Compounds, 695, p. 1528-1531.

Ashoka S., Saleema Noormohammed et Sarkar Dilip K.. (2017). Tuning of superhydrophobic to hydrophilic surface: A facile one step electrochemical approach. Journal of Alloys and Compounds, 695, p. 1528-1531.

Askaripour Mahdi, Saeidi Ali, Rouleau Alain et Mercier-Langevin Patrick. (2022). Rockburst in underground excavations: A review of mechanism, classification, and prediction methods. Underground Space,

Attia Mohamed, Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2020). Fatigue cycles and performance evaluation of accelerating aging heat treated aluminum semi solid materials designed for automotive dynamic components. Applied Sciences, 10, (9), p. 1-15.

Ayang Albert, Wamkeue René, Ouhrouche Mohand, Djongyang Noël, Essiane Salomé Ndjakomo, Pombe Joseph Kessel et Ekemb Gabriel. (2019). Maximum likelihood parameters estimation of single-diode model of photovoltaic generator. Renewable Energy, 130, p. 111-121.

Ayena Cossoun Johannes, Tremblay Louis E., Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. (2018). Comparing auditory, visual and vibrotactile cues in individuals with Parkinson’s disease for reducing risk of falling over different types of soil. Somatosensory & Motor Research, p. 1-9.

Ayena Johannes C., Chioukh Lydia, Otis Martin J.-D. et Deslandes Dominic. (2021). Risk of falling in a timed Up and Go test using an UWB radar and an instrumented insole. Sensors, 21, (3), p. 722.

Ayena Johannes C. et Otis Martin J.-D.. (2020). Dimensional reduction of balance parameters in risk of falling evaluation using a minimal number of force-sensitive resistors. International Journal of Occupational Safety and Ergonomics,

Ayena Johannes C. et Otis Martin J.-D.. (2020). Validation of minimal number of force sensitive resistors to predict risk of falling during a timed up and go test. Journal of Medical and Biological Engineering,

Azimi Yancheshme Amir, Allahdini Anahita, Maghsoudi Khosrow, Jafari Reza et Momen Gelareh. (2020). Potential anti-icing applications of encapsulated phase change material–embedded coatings; a review. Journal of Energy Storage, 31, e101638.

Azimi Yancheshme Amir, Enayati Saman, Kashcooli Yaser, Jafari Reza, Ezzaidi Hassan et Momen Gelareh. (2022). Dynamic behavior of impinging drops on water repellent surfaces: Machine learning-assisted approach to predict maximum spreading. Experimental Thermal and Fluid Science, 139, e110743.

Azimi Yancheshme Amir, Hassantabar S., Maghsoudi Khosrow, Keshavarzi Samaneh, Jafari Reza et Momen Gelareh. (2021). Integration of experimental analysis and machine learning to predict drop behavior on superhydrophobic surfaces. Chemical Engineering Journal, 417, e127898.

Azimi Yancheshme Amir, Hassantabar S., Maghsoudi Khosrow, Keshavarzi Samaneh, Jafari Reza et Momen Gelareh. (2021). Integration of experimental analysis and machine learning to predict drop behavior on superhydrophobic surfaces. Chemical Engineering Journal, 417, e127898.

Azimi Yancheshme Amir, Momen Gelareh et Jafari Reza. (2020). Mechanisms of ice formation and propagation on superhydrophobic surfaces: A review. Advances in Colloid and Interface Science, 279, e102155.

Azizi Sohrab, Momen Gelareh, Ouellet-Plamondon Claudiane et David Éric. (2020). Enhancement in electrical and thermal performance of high‐temperature vulcanized silicone rubber composites for outdoor insulating applications. Journal of Applied Polyer Science, 137, e49514.

Azizi Sohrab, Momen Gelareh, Ouellet-Plamondon Claudiane et David Éric. (2020). Performance improvement of EPDM and EPDM/Silicone rubber composites using modified fumed silica, titanium dioxide and graphene additives. Polymer Testing, 84,

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad et Fofana Issouf. (2018). Uniform distribution with MBO method of the infrared radiative energy in the thermoforming process of an ABS sheet. Cahiers du Gerad, G-2018-73,

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad, Fofana Issouf et Nahas Nabil. (2018). Numerically optimizing the distribution of the infrared radiative energy on a surface of a thermoplastic sheet surface. Journal of Heat Transfer, 140, (10), p. 102101-102108.

Baiteche Mounir, Kocaefe Duygu, Kocaefe Yasar S., Marceau Daniel, Morais Brigitte et Lafrance Jacques. (2015). Description and applications of a 3D mathematical model for horizontal anode baking furnaces. Light Metals, p. 1115-1120.

Barkallah Eya, Freulard Johan, Otis Martin J.-D., Ngomo Suzy, Ayena Cossoun Johannes et Desrosiers Christian. (2017). Wearable devices for classification of inadequate posture at work using neural networks. Sensors, 17, (9), p. 1-24.

Barthod Christine, Passard Michelle, Galez C., Bouillot Jacques, Farzaneh Masoud, Volat Christophe et Teisseyre Yves. (2003). Safe probe for high electric field measurements. CCECE 2003 - Canadian Conference on Electrical and Computer Engineering. Toward a Caring and Humane Technology, 2003, p. 635-638.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Fuel consumption evaluation of an optimized new hybrid pneumatic-combustion vehicle engine on several driving cycles. International Journal of Engine Research, 13, (3), p. 253-273.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). A new hybrid pneumatic combustion engine to improve fuel consumption of wind-Diesel power system for non-interconnected areas. Applied Energy, 96, p. 459-476.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Optimal management of compressed air energy storage in a hybrid wind-pneumatic-diesel system for remote area's power generation. Energy, 84, p. 267-278.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Pneumatic hybridization of a diesel engine using compressed air storage for wind-diesel energy generation. Energy, 38, (1), p. 264-275.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. (2012). Required time response of a variable valve actuator equiping a hybrid pneumatic-combustion engine. International Journal of Engine Research, 13, (5), p. 514-528.

Bédard L. Paul. (1996). Archean High-Mg Quartz-Monzodiorite Suite : A Re-evaluation of the Parental Magma and Differentiation. The Journal of Geology, 104, (6), p. 713-728.

Bédard L. Paul et Esbensen Kim H.. (2019). Revisiting the Replication Experiment. Spectroscopy Europe, 31, (4), p. 25-29.

Bédard L. Paul, Longuépée Hugues et Savard Dany. (2009). Geoheritage 4: Raising Public Awareness of Geological Heritage at L’Université du Québec à Chicoutimi. Geoscience Canada, 36, (3), p. 112-114.

Behjat Vahid, Emadifar Reza, Pourhossein Mehrdad, Ungarala Mohan Rao, Fofana Issouf et Najjar Reza. (2021). Improved monitoring and diagnosis of transformer solid insulation using pertinent chemical indicators. Energies, 14, (13), p. 3977.

Behjat Vahid, Rezaei-Zare Afshin, Fofana Issouf et Naderian Ali. (2021). Concept design of a high-voltage electrostatic sanitizer to prevent spread of COVID-19 coronavirus. Energies, 14, (22), e7808.

Béland J.F, Fafard Mario, Rahem Ahmed, D'Amours Guillaume et Côté T.. (2011). Optimization on the cold drawing process of 6063 aluminium tubes. Applied Mathematical Modelling, 35, (11), p. 5302-5313.

Belkhir Salah, Hocine Moulai, Fathallah Soukeur et Ouhrouche Mohand. (2010). Electric field assessment for application to live working. International Journal of Power and Energy Systems, 30, (3),

Bellandi Valerio, Chehri Abdellah, Cuomo Salvatore et Jeon Gwanggil. (2021). Special issue on deep learning for emerging big multimedia super-resolution. Multimedia Systems, 2021,

Ben Brahem Mahmoud, Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. (2013). Use of a 3DOF accelerometer for foot tracking and gesture recognition in mobile HCI. Procedia Computer Science, 19, p. 453-460.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2017). A non-destructive technique for the on-line quality control of green and baked anodes. Metals, 7, (4), p. 128-138.

Beroual Abderrahmane et Fofana Issouf. (2000). Evaluation of the Streamer Conductivity in Liquids using and Equivalent Electrical Network Model. Archives of Electrical Engineering, 49, (1), p. 23-33.

Beroual Abderrahmane, Rakotonandrasana J-H et Fofana Issouf. (2010). Predictive dynamic model of the negative lightning discharge based on similarity with long laboratory sparks - Part 1: Physical process and modelling. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (5), p. 1551-1561.

Beroual Abderrahmane, Rakotonandrasana J-H et Fofana Issouf. (2010). Predictive dynamic model of the negative lightning discharge based on the similarity with long laboratory sparks - Part 2: Validation. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (5), p. 1562-1568.

Bessedik Sid Ahmed, Hadi Hocine A., Volat Christophe et Jabbari Marouane. (2014). Refinement of residual resistance calculation dedicated to polluted insulator flashover models. IEEE Transactions on Dielectrics and Electrical Insulation, 21, (3), p. 1207-1215.

Bétié Amidou, Meghnefi Fethi, Fofana Issouf et Yéo Zié. (2018). Modeling the insulation paper drying process from thermogravimetric analyses. Energies, 11, (3), p. 517.

Bétié Amidou, Meghnefi Fethi, Fofana Issouf, Yéo Zié et Ezzaidi Hassan. (2015). Neural network approach to separate aging and moisture from the dielectric response of oil impregnated paper insulation. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (4), p. 2176-2184.

Bétié Amidou, Ungarala Mohan Rao, Fofana Issouf, Fethi Meghnefi et Yéo Zié. (2019). Influence of cellulose paper on gassing tendency of transformer oil under electrical discharge. IEEE Transactions on Dielectrics and Electrical Insulation, 26, (6), p. 1729-1737.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2017). An artificial neural network model for predicting the CO2 reactivity of carbon anodes used in the primary aluminum production. Neural Computing and Applications, 28, (3), p. 553-563.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2015). Comparison of linear multivariable, partial least square regression, and artificial neural network analyses to study the effect of different parameters on anode properties. Light Metals, p. 1129-1134.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2013). Determination of coke, pitch and pores/cracks in green anode by image analysis. Journal of Surface Engineered Materials and Advanced Technology, 3, p. 1-6.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Application of the artificial neural network (ANN) in predicting anode properties. Light Metals, p. 1189-1194.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). A model for predicting the electrical resistivity of baked anodes. Light Metals, p. 1195-1199.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Lafrance Jacques. (2015). Traceability of raw materials in silos in an anode plant. Light Metals, p. 1073-1078.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Arunima, Morais Brigitte et Chabot Jérôme. (2014). Characterization of dry aggregates in carbon anodes by image analysis. Light Metals, p. 1111-1114.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2012). Application of a new procedure for the optimization of variable thickness drawing of aluminium tubes. CIRP Journal of Manufacturing Science and Technology, 5, (2), p. 142-150.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2015). Global optimisation of the production of complex aluminium tubes by the hydroforming process. CIRP Journal of Manufacturing Science and Technology, 9, p. 1-11.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for production of variable thickness aluminium tubes : numerical and experimental studies. Journal of Materials Processing Technology, 211, (4), p. 578-589.

Bihamta Reza, Bui Quang-Hien, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Perspectives for the application of variable thickness aluminium tubes in hydroforming of complex tubes. Materials Science Forum, 690, p. 447-450.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Guillot Michel, Rahem Ahmed et Fafard Mario. (2013). Numerical and experimental studies on the new design concept of hydroforming dies for complex tubes. Materials and Design, 47, p. 766-778.

Bolduc Sébastien et Kiss László. (2020). Sensitivity study of the influence of the water boiling parameters on aluminum semi-continuous DC casting. International Journal of Thermal Sciences, 151, (106276),

Bolouri Amir et Chen X-Grant. (2018). Transient rheological behavior of semisolid SEED-processed 7075 aluminum alloys in rapid compression. Metallurgical and Materials Transactions B, 49, (5), p. 2858-2867.

Bouaicha Abdelghafour, Fofana Issouf, Farzaneh Masoud, Beroual Abderrahmane, Setayeshmehr Alireza, Borsi Hossein et Gockenbach Ernst. (2008). Contrôle non destructif des isolations électriques par spectroscopie diélectrique durant la fabrication des bornes de traversée. Revue de l'Electricité et de l'Electronique, 11, p. 58-67.

Bouaïcha Abdelghafour, Fofana Issouf, Farzaneh Masoud, Setayeshmehr Alireza, Borsi Hossein, Gockenbach E., Beroual Abderrahmane et Aka Ngnui-Thomas. (2009). Dielectric spectroscopy techniques as quality control tool: a feasibility study. IEEE Electrical Insulation Magazine, 25, (1), p. 6-14.

Bouchard Gilles, Laforte Jean-Louis et Louchez Patrick R.. (1995). Wind tunnel study on lift reduction on a wing section covered with anti-icing fluid in supercooled precipitation. Canadian Aeronautics and Space Journal, 41, (4), p. 185-192.

Bouhassoune Ibtissame, Chaibi Hasna, Chehri Abdellah et Saadane Rachid. (2021). UHF RFID Spiral-Loaded Dipole Tag Antenna Conception for Healthcare Applications. Procedia Computer Science, 192, p. 2531-2539.

Bouhassoune Ibtissame, Chehri Abdellah, Saadane Rachid et Minaoui Khalid. (2020). Optimization of UHF RFID five-slotted patch tag design using PSO algorithm for biomedical sensing systems. International Journal of Environmental Research and Public Health, 17, (22), p. 8593.

Boumaiza Lamine, Walter Julien, Chesnaux Romain, Zahi Faouzi, Huneau Frédéric, Garel Émilie, Stotler Randy L., Bordeleau Geneviève, Johannesson Karen H., Vystavna Yuliya, Drias Tarek, Re Viviana, Knöller Kay et Stumpp Christine. (2022). Combined effects of seawater intrusion and nitrate contamination on groundwater in coastal agricultural areas: A case from the Plain of the El-Nil River (North-Eastern Algeria). Science of The Total Environment, 851, e158153.

Bouslimi Y., Taheri K., Fofana Issouf, Hemmatjou Hossein et Volat Christophe. (2013). Influence of oil-paper conditions on the static electrification phenomena of transformer oils. High Voltage Engineering, 39, (8), p. 1966-1973.

Brahami Yassine, Saeidi Ali, Fiset Mathieu et Ba Kadiata. (2022). The effects of the type and quantity of recycled materials on physical and mechanical properties of concrete and mortar: A review. Sustainability, 14, (22), e14752.

Brassard Jean-Denis, Beaulieu Audrey, Tremblay Marc Mario et Momen Gelareh. (2022). Assessment of runway surface conditions by British Pendulum testing under the Global Reporting Format winter conditions. Applied Sciences, 12, (19), e9646.

Brassard Jean-Denis, Blackburn Caroline, Toth Miklos et Momen Gelareh. (2022). Ice accretion, shedding, and melting on cable-stayed bridges: A laboratory performance assessment. Cold Regions Science and Technology, 204, e103672.

Brassard Jean-Denis, Laforte Caroline, Tremblay Marc Mario et Volat Christophe. (2019). Runway deicing product anti/deicing performance assessment: review and future directions. SAE Technical Papers, 2019, (1974),

Brassard Jean-Denis, Laforte Caroline et Volat Christophe. (2019). Type IV anti-icing fluid subjected to light freezing rain: visual and thermal analysis. SAE Technical Papers, (1971),

Brassard Jean-Denis, Laforte Jean-Louis, Blackburn Caroline, Perron Jean et Sarkar Dilip K.. (2017). Silicone based superhydrophobic coating efficient to reduce ice adhesion and accumulation on aluminum under offshore arctic conditions. Ocean Engineering, 144, p. 135-141.

Brassard Jean-Denis, Posteraro Dany, Sobhani Sarah, Ruggi Marco et Momen Gelareh. (2021). A Multi-Tool Analysis to Assess the Effectiveness of Passive Ice Protection Materials to Assist Rotorcraft Manual De-Icing. Applied Sciences, 11, (24), e11847.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Fluorine Based Superhydrophobic Coatings. Applied Sciences, 2, (2), p. 453-464.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2015). Studies of drag on the nanocomposite superhydrophobic surfaces. Applied Surface Science, 324, (1), p. 525-531.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2012). Surface modification and functionalization of oxide nanoparticles for superhydrophobic applications. Advanced Materials Research, 409, p. 469-473.

Brassard Jean-Denis, Sarkar Dilip K. et Perron Jean. (2011). Synthesis of Monodisperse Fluorinated Silica Nanoparticles and Their Superhydrophobic Thin Films. ACS Applied Materials & Interfaces, 3, (9), p. 3583-3588.

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean, Audibert-Hayet Annie et Melot Denis. (2015). Nano-micro structured superhydrophobic zinc coating on steel for prevention of corrosion and ice adhesion. Journal of Colloid and Interface Science, 447, p. 240-247.

Brassard Jean-Denis, Sarkar Dilip K., Perron Jean et Fortin Guy. (2010). Nanostructured superhydrophobic coatings using fluoroalkylsilane modified silica nanoparticles. 1st conference on Nanotechnologies: Fundamentals and applications,

Brassard Jean-Denis, Villeneuve Éric et Volat Christophe. (2020). Laboratory scaled third rail deicing comparative test. Results in Engineering, 6, p. 1-2.

Bregnocchi Agnese, Jafari Reza et Momen Gelareh. (2022). Design strategies for antiviral coatings and surfaces: A review. Applied Surface Science Advances, 8, e100224.

Brettschneider Stephan et Fofana Issouf. (2021). Evolution of countermeasures against atmospheric icing of power lines over the past four decades and their applications into field operations. Energies, 14, (19), p. 6291.

Briosso E., Fofana Issouf, Robertson B. et Sabau John. (2007). Enhancing the Maintenance of Transformer Oils to Diminish the Risk of Blackouts. Energetica, 55, p. 465-469.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). Investigation of the formability limit of aluminium tubes drawn with variable wall thickness. Journal of Materials Processing Technology, 211, (3), p. 402-414.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, Rahem Ahmed et Fafard Mario. (2011). Effect of cross section reduction on the mechanical properties of aluminium tubes drawn with variable wall thickness. Journal of Manufacturing Science and Engineering, 133, (6), p. 1-10.

Bui Rung-Tien et Perron Jean. (1988). Performance analysis of the aluminum casting furnace. Metallurgical Transactions B, 19, (2), p. 171-180.

Bui Rung-Tien, Perron Jean et Read M.. (1993). Model-based optimization of the operation of the coke calcining kiln. Carbon, 31, (7), p. 1139-1147.

Bui Rung-Tien, Simard G., Charette André, Kocaefe Yasar S. et Perron Jean. (1995). Mathematical modeling of the rotary coke calcining kiln. The Canadian Journal of Chemical Engineering, 73, (4), p. 534-545.

Bui Rung-Tien, Simard G., Kocaefe Yasar S., Charette André, Lacroix M., Jain S., Perron Jean, Proulx André L. et Barr P. V.. (1991). 3D-simulation of the thermal performance of a coke calcining kiln. International Symposium on Extraction, Refining and Fabrication of Light Metals, 24, p. 307-314.

Bureau Julie, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Quantification of sodium present in dry aggregates and anodes. Light Metals, p. 877-881.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2018). Étude de l’amélioration des propriétés des anodes par le brai modifié. The Canadian Journal of Chemical Engineering, 96, (8), p. 1697-1706.

Bureau Julie, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2018). Modification des propriétés du brai de goudron de houille utilisé dans la fabrication des anodes. Canadian Journal of Chemical Engineering, 96, (2), p. 545-553.

Bureau Julie, Rastegari Armita, Kocaefe Duygu, Kocaefe Yasar S. et Darmstadt Hans. (2020). Additive selection for coal tar pitch modification in aluminium industry. Light Metals, 2020, p. 1329-1337.

Campeau-Lecours Alexandre, Otis Martin J.-D., Belzile Pierre-Luc et Gosselin Clément. (2016). A time-domain vibration observer and controller for physical human-robot interaction. Mechatronics, 36, p. 45-53.

Campeau-Lecours Alexandre, Otis Martin J.-D. et Gosselin Clément. (2016). Modeling of physical human–robot interaction : admittance controllers applied to intelligent assist devices with large payload. International Journal of Advanced Robotic Systems, 13, (5), p. 1-12.

Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Zimmerman Alfred. (2020). Parallel Genetic Algorithm Decoder Scheme Based on DP-LDPC codes for industrial IoT scenarios. Procedia Computer Science, 176, p. 3496-3505.

Chamam Yasmine, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Morais Brigitte. (2016). Effect of heating rate during baking on the properties of carbon anodes used in aluminum industry. Light Metals, p. 947-951.

Charest Philippe, Potvin André, Demers Claude M. H. et Ménard Sylvain. (2019). Assessing the complexity of timber gridshells in architecture through shape, structure, and material classification. BioResources, 14, (1), p. 1364-1378.

Charpentier Claire, Brassard Jean-Denis, Momen Gelareh et Perron Jean. (2023). Development of a dynamic ice penetration model for runway de-icing products through performance experimental characterization. Cold Regions Science and Technology, 213, e103932.

Charpentier Claire, Brassard Jean-Denis, Momen Gelareh et Perron Jean. (2023). Development of a dynamic ice penetration model for runway de-icing products through performance experimental characterization. Cold Regions Science and Technology, 213, e103932.

Chehouri Adam, Ghandour Mazen et Livinti Petru . (2014). A real time simulation of a photovoltaic system with maximum power point tracking. Proceedings of the International Conference on Industrial Power Engineering , 9th,

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2015). Review of performance optimization techniques applied to wind turbines. Applied Energy, 142, p. 361-388.

Chehouri Adam, Younès Rafic, Khoder Jihan, Perron Jean et Ilinca Adrian. (2017). A selection process for genetic algorithm using clustering analysis. Algorithms, 10, (4), p. 123.

Chehri Abdellah. (2019). Energy-efficient modified DCC-MAC protocol for IoT in e-health applications. Internet of Things, e100119.

Chehri Abdellah. (2021). MAC Protocols for Industrial Delay-Sensitive Applications in Industry 4.0: Exploring Challenges, Protocols, and Requirements. Procedia Computer Science, 192, p. 4542-4551.

Chehri Abdellah, Chaibi Hasna, Saadane Rachid, Hakem Nadir et Wahbi Mohamed. (2020). A framework of optimizing the deployment of IoT for precision agriculture industry. Procedia Computer Science, 176, p. 2414-2422.

Chehri Abdellah, Fofana Issouf et Yang Xiaomin. (2021). Security risk modeling in smart grid critical infrastructures in the era of big data and artificial intelligence. Sustainability, 13, (6), p. 3196.

Chehri Abdellah, Fortier Paul et Tardif Pierre-Martin. (2018). Time delay estimation for UWB non coherent receiver in indoor environment, from theory to practice. EURASIP Journal on Wireless Communications and Networking, (284), p. 1-11.

Chehri Abdellah et Jeon Gwanggil. (2018). Optimal matching between energy saving and traffic load for mobile multimedia communication. Concurrency and Computation : Practice and Experience, 33, (4), e5035.

Chehri Abdellah et Jeon Gwanggil. (2018). Real‐time multiuser scheduling based on end‐user requirement using big data analytics. Concurrency and Computation : Practice and Experience, 33, (4), e5021.

Chehri Abdellah, Jeon Gwanggil, Fofana Issouf, Imran Ahmed et Saadane Rachid. (2021). Accelerating Power Grid Monitoring with Flying Robots and Artificial Intelligence. IEEE Communications Standards Magazine, 5, (4), p. 48-54.

Chehri Abdellah et Mouftah Hussein T.. (2021). Autonomous Algorithms for Spectrum Management of 6LoPLC Networks for Industrial Applications. IEEE Sensors,

Chehri Abdellah et Mouftah Hussein T.. (2019). Autonomous vehicles in the sustainable cities, the beginning of a green adventure. Sustainable Cities and Society, 51, e101751.

Chehri Abdellah et Mouftah Hussein T.. (2020). Internet of Things – integrated IR-UWB technology for healthcare applications. Concurrency and Computation : Practice and Experience, 32, (2), e5454.

Chehri Abdellah, Ouahmani Tarik El et Hakem Nadir. (2019). Mining and IoT-based Vehicle Ad-hoc NETwork: Industry opportunities and innovation. Internet of Things, e100117.

Chehri Abdellah, Saadane Rachid, Hakem Nadir et Chaibi Hasna. (2020). Enhancing energy efficiency of wireless sensor network for mining industry applications. Procedia Computer Science, 176, p. 261-270.

Chehri Abdellah, Zimmermann Alfred, Schmidt Rainer et Masuda Yoshimasa. (2021). Theory and Practice of Implementing a Successful Enterprise IoT Strategy in the Industry 4.0 Era. Procedia Computer Science, 192, p. 4609-4618.

Chehri Hamou, Chehri Abdellah et Hakem Nadir. (2019). In underground vehicular radio channel characterization. Procedia Computer Science, 159, p. 514-523.

Chehri Hamou, Chehri Abdellah, Kiss László et Zimmerman Alfred. (2020). Automatic anode rod inspection in aluminum smelters using deep-learning techniques: a case study. Procedia Computer Science, 176, p. 3536-3544.

Chen Sinan, Liu Kun et Chen X-Grant. (2019). Precipitation behavior of dispersoids and elevated-temperature properties in Al–Si–Mg foundry alloy with Mo addition. Journal of Materials Research, 34, (18), p. 3071-3081.

Chen Zhixing, Elgallad Emad M., Liu Kun et Chen X-Grant. (2022). Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions. Metallography, Microstructure, and Analysis,

Chen Zhixing, Liu Kun, Elgallad Emad M., Breton Francis et Chen X-Grant. (2020). Differential scanning calorimetry fingerprints of various heat-treatment tempers of different aluminum alloys. Metals, 10, (6), e763.

Cui Liying, Zhang Zhan et Chen X-Grant. (2023). Development of lightweight Al-based entropy alloys for elevated temperature applications. Journal of Alloys and Compounds, 938, e168619.

Cui Liying, Zhang Zhan et Chen X-Grant. (2023). Microstructure and mechanical properties of novel Al–Cu–Mg–Zn lightweight entropy alloys for elevated-temperature applications. Materials Characterization, 200, e112927.

Dabaghi-Zarandi Fataneh, Behjat Vahid, Gauvin Michel, Picher Patrick, Ezzaidi Hassan et Fofana Issouf. (2023). Power Transformers OLTC Condition Monitoring Based on Feature Extraction from Vibro-Acoustic Signals: Main Peaks and Euclidean Distance. Sensors, 23, (16), e7020.

Darimireddy Naresh K., Ungarala Mohan Rao, Park Chan-Wang, Fofana Issouf, Sujatha M. et Verma Anant K.. (2021). Perspectives of convertors and communication aspects in automated vehicles, part 2: Printed antennas and sensors for automotive radars. Energies, 14, (6), p. 1656.

De Andrade Ferreira R. S., Picher Patrick, Ezzaidi Hassan et Fofana Issouf. (2021). Frequency response analysis interpretation using numerical indices and machine learning: A case study based on a laboratory model. IEEE Access, 9, p. 67051-67063.

De Debasis et Sarkar Dilip K.. (2017). Superhydrophobic ZnAl double hydroxide nanostructures and ZnO films on Al and glass substrates. Materials Chemistry and Physics, 185, p. 195-201.

Desroches Dany, Bédard L. Paul, Lemieux Samuel et Esbensen Kim H.. (2018). Suitability of using a handheld XRF for quality control of quartz in an industrial setting. Minerals Engineering, 126, p. 36-43.

Dion Lukas, Gaboury Simon, Picard Frédéric, Kiss László, Poncsák Sándor et Morais Nadia. (2018). Universal approach to estimate perfluorocarbons emissions during individual high-voltage anode effect for prebaked cell technologies. Journal of the Minerals, Metals and Materials Society, 70, (9), p. 1887-1892.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2016). Prediction of low-voltage tetrafluoromethane emissions based on the operating conditions of an aluminium electrolysis cell. Journal of The Minerals, Metals & Materials Society, 68, (9), p. 2472-2482.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2018). Simulator of non-homogenous alumina and current distribution in an aluminum electrolysis cell to predict low-voltage anode effects. Metallurgical and Materials Transactions B, 49, p. 737-755.

Dion Lukas, Marks Jerry, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2017). Quantification of perfluorocarbons emissions during high voltage anode effects using non-linear approach. Journal of Cleaner Production, 164, p. 357-366.

Dotan A., Dodiuk H., Laforte Caroline et Kenig S.. (2009). The relationship between water wetting and ice adhesion. Journal of Adhesion Science and Technology, 23, (15), p. 1907-1915.

Douassi Kakou D., Fofana Issouf, Cissé Ladji, Hadjadj Yazid, Yapi Kouba Marie Lucia et Ambroise Diby K.. (2018). Impact of low molecular weight acids on oil impregnated paper insulation degradation. Energies, 11, (6), p. 1465-478.

Ebrahimi G. R., Arabshahi H. et Javdani Mousa. (2010). Hot deformation behavior of Nb-V microalloyed steel. Journal of Mechanical Engineering Research, 2, (5), p. 92-96.

Ebrahimi G. R., Javdani Mousa et Arabshahi H.. (2010). Effect of thermo-mechanical parameters on microstructure and mechanical properties of microalloyed steels. Brazilian Journal of Physics, 40, (4), p. 454-458.

Ekemb Gabriel, Slaoui-Hasnaoui Fouad, Song-Manguelle Joseph, Lingom P.M. et Fofana Issouf. (2021). Instantaneous electromagnetic torque components in synchronous motors fed by load-commutated inverters. Energies, 14, (11), p. 3223.

El Amine Mohammed, Brahami Mostefa et Fofana Issouf. (2018). Combining and comparing different machine learning algorithms to improve dissolved gas analysis interpretation. IET Generation, Transmission & Distribution, 12, (15), p. 3673-3679.

El Aswad Fadwa, Tchane Djogdom Gilde Vanel, Otis Martin J.-D., Ayena Johannes C. et Meziane Ramy. (2021). Image Generation for 2D-CNN Using Time-Series Signal Features from Foot Gesture Applied to Select Cobot Operating Mode. Sensors, 21, (17), p. 5743.

El Rharras Abdessamad, Saber Mohammed, Chehri Abdellah, Saadane Rachid, Hakem Nadir et Jeon Gwanggil. (2020). Optimization of spectrum utilization parameters in cognitive radio using genetic algorithm. Procedia Computer Science, 176, p. 2466-2475.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Effect of Si Level on the Evolution of Zr‐Bearing Dispersoids and the Related Hot Deformation and Recrystallization Behaviors in Al–Si–Mg 6xxx Alloys. Advanced Engineering Materials, e2101606.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization. Philosophical Magazine, p. 1-17.

Elasheri Ali, Elgallad Emad M., Parson Nick et Chen X-Grant. (2022). Nucleation and transformation of Zr-bearing dispersoids in Al–Mg–Si 6xxx alloys. Journal of Materials Research,

Elashri A., Elgallad E. M., Parson Nick et Chen X-Grant. (2021). Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy. Journal of Materials Engineering and Performance, 30, p. 7851-7862.

Elele Ugochukwu, Nekahi Azam, Arshad Arshad et Fofana Issouf. (2022). Towards Online Ageing Detection in Transformer Oil: A Review. Sensors, 22, (20), e7923.

Elele Ugochukwu, Nekahi Azam, Arshad Arshad, McAulay Kate et Fofana Issouf. (2023). Sensitivity Analysis of Intensity-Modulated Plastic Optical Fiber Sensors for Effective Aging Detection in Rapeseed Transformer Oil. Sensors, 23, (24), e9796.

Elgallad E. M., Liu Kun, Zhang Zhan et Chen X-Grant. (2020). Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy. Philosophical Magazine, 101, (1), p. 96-116.

Elgallad Emad Eldin, Zhang Zhan et Chen X-Grant. (2017). Effect of quenching rate on precipitation kinetics in AA2219 DC cast alloy. Physica B: Condensed Matter, 514, p. 70-77.

Elgallad Emad M., Chen Zhixing et Chen X-Grant. (2023). On the Room- and Elevated-Temperature Tensile Properties of Hot-Rolled 6082 Alloys Containing Thermally Stable Dispersoids. Journal of Materials Engineering and Performance,

Emran S. M. Ale, Farzaneh Masoud et Volat Christophe. (2012). Simulation analysis of the effect of booster sheds on post insulators under icing conditions. 2012 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2012, (13175005), p. 749-752.

Errouissi Rachid et Ouhrouche Mohand. (2010). Nonlinear predictive controller for a permanent magnet synchronous motor drive. Mathematics and Computers in Simulation, 81, (2), p. 394-406.

Errouissi Rachid, Ouhrouche Mohand, Chen Wen-Hua et Trzynadlowski Andrzej M.. (2012). Robust Cascaded Nonlinear Predictive Control of a Permanent Magnet Synchronous Motor With Antiwindup Compensator. IEEE Transactions on Industrial Electronics, 59, (8), p. 3078-3088.

Eslami Esmaeil, Jafari Reza et Momen Gelareh. (2021). A review of plasma-based superhydrophobic textiles: theoretical definitions, fabrication, and recent developments. Journal of Coatings Technology and Research,

Fakhouri H., Smith W., Pulpytel Jerome, Zolfaghari A., Mortaheb Hamid Reza, Meshkini Fateme, Jafari Reza et Arefi-Khonsari F.. (2011). Enhancement of NMP degradation under UV light by nitrogen-doped TiO2 thin films using a design of experiment. Journal of Nano- and Electronic Physics, 3, (1), p. 26-40.

Fakhouri Houssam, Pulpytel Jerome, Smith Wilson, Zolfaghari Alireza, Mortaheb Hamid Reza, Meshkini Fateme, Jafari Reza, Sutter Eliane et Arefi-Khonsari Farzaneh. (2014). Control of the Visible and UV Light Water Splitting and Photocatalysis of Nitrogen Doped TiO2 Thin Films Deposited by Reactive Magnetron Sputtering. Applied Catalysis B: Environmental, 144, p. 12-21.

Fakorede Chabi Oloufemi, Feger Zoé, Ibrahim Hussein, Ilinca Adrian, Perron Jean et Masson Christian. (2016). Ice protection systems for wind turbines in cold climate: characteristics, comparisons and analysis. Renewable and Sustainable Energy Reviews, 65, p. 662-675.

Farid H., Farzaneh Masoud, Saeidi Ali et Erchiqui Fouad. (2016). A contribution to the study of the compressive behavior of atmospheric ice. Cold Regions Science and Technology, 121, p. 60-65.

Farid Redouane, Rajan Karthikeyan et Sarkar Dilip K.. (2019). Enhanced corrosion protection of aluminum by ultrasonically dip coated sodium silicate thin films. Surface and Coatings Technology, 374, p. 355-361.

Farid Redouane, Sarkar Dilip K. et De D.. (2019). Facile electrodeposition and corrosion properties of zirconium-based superhydrophobic thin films on aluminum. International Journal of Wettability Science & Technology, 1, (2), p. 121-136.

Farkoosh Amir Rezaei, Javidani Mousa, Hoseini M., Larouche Daniel et Pekguleryuz M.. (2013). Phase formation in as-solidified and heat-treated Al–Si–Cu–Mg–Ni alloys: Thermodynamic assessment and experimental investigation for alloy design. Journal of Alloys and Compounds, 551, p. 596-606.

Farokhi Shahab, Farzaneh Masoud et Fofana Issouf. (2010). The effect of polarity on dc arc development over an ice surface. Journal of Physics D: Applied Physics, 43, (18), p. 185202-185214.

Farokhi Shahab, Farzaneh Masoud et Fofana Issouf. (2010). Experimental investigation of the process of Arc propagation over an ice surface. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (2), p. 458-464.

Farzaneh Masoud, Baker Anthony C., Bernstorf R. Allen, Burnhan Jeff T., Cherney Edward A., Chisholm William A., Fofana Issouf, Gorur Ravi S., Grisham Tom, Gutman Igor, Rolfseng Lars et Stewart Gerald A.. (2007). Selection of line insulators with respect to ice and snow, Part II : selection methods and mitigations options. IEEE Transactions on Power Delivery, 22, (4), p. 2297-2304.

Farzaneh Masoud et Fofana Issouf. (2004). Experimental study and analysis of corona discharge parameters on an ice surface. Journal of Physics D: Applied Physics, 37, p. 721-729.

Farzaneh Masoud et Fofana Issouf. (2012). Review of streamer dynamics and surface charge accumulation on ice surfaces. Electrical and Electronic Engineering, 2, (6), p. 389-396.

Farzaneh Masoud et Fofana Issouf. (2004). Study of insulator flashovers caused by atmospheric ice accumulation. Journal of Iranian Association of Electrical and Electronics Engineers, 1, (1), p. 10-23.

Farzaneh Masoud, Fofana Issouf et Hemmatjou Hossein. (2007). Effects of temperature and impurities on the DC conductivity of snow. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (1), p. 185-193.

Farzaneh Masoud, Fofana Issouf, Ndiaye Ibrahima et Srivastava K. D.. (2006). Experimental studies of ice surface discharge inception and development. International Journal of Power & Energy Systems, 26, (1), p. 34-41.

Farzaneh Masoud, Fofana Issouf, Tavakoli C. et Chen X-Grant. (2003). Dynamic modeling of DC arc discharge on ice surfaces. IEEE Transactions on Dielectrics and Electrical Insulation, 10, (3), p. 463-474.

Farzaneh Masoud, Volat Christophe et Gakwaya Augustin. (2000). Electric field modelling around an ice-covered insulator using boundary element method. Conference Record of the 2000 IEEE International Symposium on Electrical Insulation, 2000, p. 349-355.

Farzaneh Masoud, Volat Christophe et Zhang Jianhui. (2006). Role of air gaps on AC withstand voltage of an ice-covered insulator string. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (6), p. 1350-1357.

Farzaneh Masoud, Zhang Jianhui et Volat Christophe. (2006). Effect of insulator diameter on AC flashover voltage of an ice-covered insulator string. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (2), p. 264-271.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2023). Shear design of RC members strengthened with steel reinforcing bars embedded through section. Engineering Structures, 285, e116050.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2019). Shear strengthening of concrete members with unbonded transverse reinforcement. Engineering Structures, 180, p. 40-49.

Fiset Mathieu, Sanchez Leandro F. M., Bilodeau Sébastien, Mitchell Denis et Bastien Josée. (2021). Influence of Alkali-Silica reaction (ASR) on aggregate interlock and shear-friction behavior of reinforced concrete members. Engineering Structures, 233, e111890.

Fiset Mathieu, Villemure Félix-Antoine, Bastien Josée et Mitchell Denis. (2020). Behavior of Post-Installed Bonded Bars as Shear Reinforcement. ACI Structural Journal, 117, (4), p. 159-168.

Fleury Anthony, Ranjan R., Shah L. H., St-Georges Lyne, Rahem Ahmed, Walbridge S. et Gerlich A.. (2023). Fatigue performance of thick 6061-T6 aluminum friction stir welded joints with misalignment or channel defects. Welding in the World, 67, (3), p. 707-720.

Fofana Issouf. (2013). 50 years in the development of insulating liquids. IEEE Electrical Insulation Magazine, 29, (5), p. 13-25.

Fofana Issouf. (2019). Technical committees. IEEE Electrical Insulation Magazine, 35, (6), p. 46-48.

Fofana Issouf, Ben Rhouma A., Beroual Abderrahmane et Auriol Ph. (1998). Modelling a positive lightning downward leader to study its effects on engineering systems. IEE proceedings. Generation, transmission and distribution, 145, (4), p. 395-402.

Fofana Issouf, Bergeron Yohan, Gagnon Marie-Pier, Tremblay Jonathan, Loiselle Luc, Yapi Kouba Marie Lucia et Ungarala Mohan Rao. (2021). Fullers earth treatment for esters liquids used in power apparatuses: Inferences and arguments. ENP Engineering Science Journal, 1, (1),

Fofana Issouf et Beroual Abderrahmane. (1998). Induced effects on an overhead line due to nearby positive lightning downward leader. Electric Power Systems Research, 48, (2), p. 105-119.

Fofana Issouf et Beroual Abderrahmane. (1996). A model for long air gap discharge using an equivalent electrical network. IEEE Transactions on Dielectrics and Electrical Insulation, 3, (2), p. 273-282.

Fofana Issouf et Beroual Abderrahmane. (1995). Modelling of the leader current with an equivalent electrical network. Journal of Physics D: Applied Physics, 28, (2), p. 305-313.

Fofana Issouf et Beroual Abderrahmane. (1996). A new proposal for calculation of the leader velocity based on energy considerations. Journal of Physics D: Applied Physics, 29, (3), p. 691-696.

Fofana Issouf et Beroual Abderrahmane. (1997). A predictive model of the positive discharge in long air gaps under pure and oscillating impulse shapes. Journal of Physics D: Applied Physics, 30, (11), p. 1653-1667.

Fofana Issouf et Beroual Abderrahmane. (1998). Predischarge models of dielectric liquids. Japanese Journal of Applied Physics, 37, (5R), p. 2540-2547.

Fofana Issouf, Beroual Abderrahmane et Rakotonandrasana J.H.. (2013). Application of dynamic models to predict switching impulse withstand voltages of long air gaps. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (1), p. 89-97.

Fofana Issouf, Borsi H. et Gockenbach E.. (2001). Fundamental investigations on some transformers liquids under various outdoor conditions. IEEE Transactions on Dielectrics and Electrical Insulation, 8, (6), p. 1040-1047.

Fofana Issouf, Borsi H., Gockenbach E. et Farzaneh Masoud. (2007). Aging of transformer insulating materials under selective conditions. European Transactions on Electrical Power, 17, (5), p. 450-470.

Fofana Issouf, Bouaïcha Abdelghafour, Farzaneh Masoud, Sabau John, Bussières Denis et Robertson E.B.. (2010). Decay products in the liquid insulation of power transformers. IET Electric Power Applications, 4, (3), p. 177-184.

Fofana Issouf, Bouaïcha Abdelghafour, Farzaneh Masoud, Volat Christophe et Sabau John. (2009). On the stability of mineral insulating oils under electrical stress. 2009 IEEE Electrical Insulation Conference, 2009, (10779745), p. 482-486.

Fofana Issouf, Bouaïcha Amine et Farzaneh Masoud. (2011). Characterization of aging transformer oil–pressboard insulation using some modern diagnostic techniques. European Transactions on Electrical Power, 21, p. 1110-1127.

Fofana Issouf, Bouslimi Y., Hemmatjou Hossein, Volat Christophe et Taheri K.. (2014). Relationship between static electrification of transformer oils with turbidity and spectrophotometry measurements. International Journal of Electrical Power & Energy Systems, 54, p. 38-44.

Fofana Issouf et Brettschneider Stephan. (2022). Outdoor insulation and gas-insulated switchgears. Energies, 15, (21), p. 8141.

Fofana Issouf et Farzaneh Masoud. (2007). Application of dynamic model to Flashover of ice-covered insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1410-1417.

Fofana Issouf, Farzaneh Masoud, Hemmatjou Hossein et Volat Christophe. (2008). Study of discharge in air from the tip of an icicle. IEEE Transactions on Dielectrics and Electrical Insulation, 15, (3), p. 730-740.

Fofana Issouf et Hadjadj Yazid. (2016). Electrical-based diagnostic techniques for assessing insulation condition in aged transformers. Énergies, 9, (9), p. 1-26.

Fofana Issouf, Hemmatjou Hossein et Farzaneh Masoud. (2010). Low temperature and moisture effects on polarization and depolarization currents of oil-paper insulation. Electric Power Systems Research, 80, (1), p. 91-97.

Fofana Issouf, Hemmatjou Hossein et Meghnefi Fethi. (2011). Effect of Thermal Transient on the Polarization and Depolarization Current Measurements of Oil-Paper Insulation. IEEE Transactions on Dielectrics and Electrical Insulation, 18, (2), p. 513-520.

Fofana Issouf, Hemmatjou Hossein, Meghnefi Fethi, Farzaneh Masoud, Setayeshmehr Alireza, Borsi H. et Gockenbach E.. (2010). On the frequency domain dielectric response of oil-paper insulation at low temperatures. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (3), p. 799-807.

Fofana Issouf et N’Cho Janvier Sylvestre. (2024). Liquides isolants en électrotechnique - Applications et perspectives. Conversion de l'énergie électrique,

Fofana Issouf, N'cho Janvier Sylvestre, Bétié Amidou, Hounton Épiphane, Meghnefi Fethi et Yapi Kouba Marie Lucia. (2020). Lessons to learn from post-installation pollution levels assessment of some distribution insulators. Energies, 13, (16), p. 4064.

Fofana Issouf, Sabau John et Bétié Amidou. (2015). Measurement of the relative free radical content of insulating oils of petroleum origin. Energies, 8, (8), p. 7690-7702.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2002). Challenge of mixed insulating liquids for use in high-voltage transformers. Part. 1: Investigation of mixed liquids. IEEE Electrical Insulation Magazine, 18, (3), p. 18-31.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2002). Challenge of mixed insulating liquids for use in high-voltage transformers. Part. II: Investigations of mixed liquid impregnated paper insulation. IEEE Electrical Insulation Magazine, 18, (4), p. 5-16.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2004). Drying of transformer insulation using zeolite. IEEE Electrical Insulation Magazine, 20, (1), p. 20-30.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2002). Preliminary investigations for the retrofilling of perchlorethylene based fluid filled transformer. IEEE Transactions on Dielectrics and Electrical Insulation, 9, (1), p. 97-103.

Fofana Issouf, Wasserberg V., Borsi H. et Gockenbach E.. (2001). Retrofilling conditions of high voltage transformers. IEEE Electrical Insulation Magazine, 17, (2), p. 17-30.

Fofana Issouf, Wasserberg V., Borsi Hossein, Gockenbach E. et Farzaneh Masoud. (2006). Specific investigations to quantify heavy damage causes on loading resistor modules. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (3), p. 593-600.

Fofana Issouf et Zhang Bo. (2022). High-Voltage engineering and applications in our modern society. Energies, 15, (22), e8341.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2013). The ice repellency of plasma polymerized HMDSO coatings. Applied Surface Science, 284, p. 459-463.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2018). Robust icephobic, and anticorrosive plasma polymer coating. Cold Regions Science and Technology, 151, p. 89-93.

Foroughi Mobarakeh Landan, Jafari Reza et Farzaneh Masoud. (2011). Superhydrophobic Surface Elaboration Using Plasma Polymerization of Hexamethyldisiloxane (HMDSO). Advanced Materials Research, 409, p. 783-787.

Fortin Guy, Adomou Maryelle et Perron Jean. (2011). Experimental study of hybrid anti-icing systems combining thermoelectric and hydrophobic coatings. SAE Technical Papers, 380003,

Fortin Guy, Enneji Ilham, Beisswenger Arlene et Perron Jean. (2011). Experimental study of snow precipitation over a generic deicing fluid without fluid flow. SAE Technical Papers, 380045,

Fortin Guy, Ilinca Adrian et Laforte Jean-Louis. (2004). Modèle d'accrétion de glace sur un objet bidimensionnel fixe appliquable aux pales d'éoliennes. VertigO, 5, (1),

Fortin Guy, Ilinca Adrian, Laforte Jean-Louis et Brandi Vincenzo. (2004). New roughness computation method and geometric accretion model for airfoil icing. Journal of Aircraft, 41, (1), p. 119-127.

Fortin Guy, Laforte Jean-Louis et Ilinca Adrian. (2006). Heat and mass transfer during ice accretion on aircraft wings with an improved roughness model. International Journal of Thermal Sciences, 45, (6), p. 595-606.

Fortin Guy et Perron Jean. (2012). Ice adhesion models to predict shear stress at shedding. Journal of Adhesion Science and Technology, 26, (4-5), p. 523-553.

Fotso Talla Aimé Sylvain, Erchiqui Fouad, Godard F. et Kocaefe Duygu. (2016). An evaluation of the thermal degradation kinetics of novel melt processed PET–hemp fiber composites. Journal of Thermal Analysis and Calorimetry, 126, p. 1387-1396.

Foulon Thomas, Saeidi Ali, Chesnaux Romain, Nastev Miroslav et Rouleau Alain. (2017). Spatial distribution of soil shear-wave velocity and the fundamental period of vibration : a case study of the Saguenay region, Canada. Georisk, p. 1-13.

Fraser Kirk A., St-Georges Lyne et Kiss László. (2014). Optimization of friction stir welding tool advance speed via Monte-Carlo simulation of the friction stir welding process. Materials, 7, p. 3435-3452.

Fu Shipeng, Meng Weihua, Jeon Gwanggil, Chehri Abdellah, Zhang Rongzhu et Yang Xiaomin. (2020). Two-path network with feedback connections for pan-sharpening in remote sensing. Remote Sensing, 12, (10), p. 1674.

Gaborit Gwenaël, Jarrige Pierre, Lecoche Frédéric, Dahdah Jean, Duraz Eric, Volat Christophe et Duvillaret Lionel. (2014). Single shot and vectorial characterization of intense electric field in various environments with pigtailed electrooptic probe. IEEE Transactions on Plasma Science, 42, (5), p. 1265-1273.

Gagnon David, Brassard Jean-Denis, Ezzaidi Hassan et Volat Christophe. (2020). Computer-assisted aircraft anti-icing fluids endurance time determination. Aerospace, 7, (4), p. 39-53.

Gagnon David, Brassard Jean-Denis, Ezzaidi Hassan et Volat Christophe. (2020). Computer-assisted aircraft anti-icing fluids endurance time determination. Aerospace, 7, (4), p. 39-53.

Gautam Leena, Amalanathan A. J., Sarathi R., Rao U. Mohan et Fofana Issouf. (2022). Effect of Magnetic field on Partial Discharge Initiated by Metallic Particle in Thermally Aged Natural Esters under AC and Harmonic Voltages. IEEE Access, p. 1.

Gautam Leena, Sarathi R., Soundarya P., Sekar G., Ungarala Mohan Rao et Fofana Issouf. (2023). Quantitative Estimation of the Gelling in Thermally Aged Natural Ester Dielectric Liquid. IEEE Transactions on Dielectrics and Electrical Insulation, 31, (2), p. 897-903.

Gauthier-Turcotte Étienne, Ménard Sylvain et Fiset Mathieu. (2022). Strength and Behavior of Spruce Pine Glulam Timber Moment Connections Using Glued-In Steel Rods. Journal of Structural Engineering, 148, (12),

Gensytskyy Oleksiy, Nandi Pratyush, Otis Martin J.-D., Tabi Clinton Enow et Ayena Johannes C.. (2023). Soil friction coefficient estimation using CNN included in an assistive system for walking in urban areas. Journal of Ambient Intelligence and Humanized Computing,

Gerzhova Nataliia, Dagenais Christian, Ménard Sylvain, Blanchet Pierre et Côté Jean. (2022). A Parametric Study of Fire Risks of Green Roofs to Adjacent Buildings. Fire, 5, (4), e93.

Gheribi Aïmen E., Poncsák Sándor, Kiss Làszlò, Guérard Sébastien, Bilodeau Jean-François et Chartrand Patrice. (2017). Experimental determination of the thermal diffusivity of α-Cryolite up to 810 K and comparison with first principles predictions. ACS Omega, 2, (5), p. 2224-2230.

Ghunem Refat Atef, Cherney Edward A., Farzaneh Masoud, Momen Gelareh, Illias Hazlee Azil, Mier Malagon Gustavo Arturo, Peesapati Vidyadhar et Yin Fanghui. (2022). Development and application of superhydrophobic outdoor insulation: A review. IEEE Transactions on Dielectrics and Electrical Insulation, 29, (4), p. 1392-1399.

Gillette Laurane, Gaborit Gwenaël, Volat Christophe, Dahdah Jean, Lecoche Frédéric, Jarrige Pierre et Duvillaret Lionel. (2014). Optical sensor for the diagnostic of high voltage equipment. 2014 IEEE Electrical Insulation Conference (EIC), 2014, (14501817), p. 142-146.

Gmati Ghada, Mohan Rao Ungarala, Fofana Issouf, Picher Patrick, Arroyo-Fernandez Oscar et Rebaïne Djamal. (2023). Bubbling phenomena in liquid-filled transformers: background and assessment. Energies, 16, (9), e3829.

Goharshenas Moghadam Saba, Momen Gelareh, Bakhshandeh Ehsan et Jafari Reza. (2024). To be or not to be a hydrophobic matrix? the role of coating hydrophobicity on anti-icing behavior and ions mobility of ionic liquids. Chemical Engineering Journal, 485, e149696.

Gonos Ioannis F. et Fofana Issouf. (2020). Special Issue "Selected Papers from the 2018 IEEE International Conference on High Voltage Engineering (ICHVE 2018)". Energies, 13, (18), p. 4959.

Guérin Frédéric, Laforte Caroline, Farinas Marie-Isabelle et Perron Jean. (2016). Analytical model based on experimental data of centrifuge ice adhesion tests with different substrates. Cold Regions Science and Technology, 121, p. 93-99.

Guo Zhanying, Zhao Gang et Chen X-Grant. (2016). Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing. Materials Characterization, 114, p. 79-87.

Guo Zhanying, Zhao Gang et Chen X-Grant. (2015). Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy. Materials Characterization, 102, p. 122-130.

Hadjadj Yazid, Fofana Issouf, Sabau John et Briosso E.. (2015). Assessing insulating oil degradation by means of turbidity and UV/VIS spectrophotometry measurements. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2653-2660.

Hadjadj Yazid, Fofana Issouf, van de Voort F. R. et Bussières Denis. (2016). Potential of determining moisture content in mineral insulating oil by fourier transform infrared spectroscopy. IEEE Electrical Insulation Magazine, 32, (1), p. 34-39.

Hadjadj Yazid, Meghnefi Fethi, Fofana Issouf et Ezzaidi Hassan. (2013). On the feasibility of using poles computed from Frequency Domain Spectroscopy to assess oil impregnated paper insulation conditions. Energies, 6, (4), p. 2204-2220.

Hall Glenn, Ezzaidi Hassan, Bahoura Mohammed et Volat Christophe. (2013). Classification of pizzicato and sustained articulations. 21st European Signal Processing Conference (EUSIPCO 2013), 2013, p. 1-5.

Hamdi Ahmed, Fofana Issouf et Djillali Mahi. (2017). Stability of mineral oil and oil–ester mixtures under thermal ageing and electrical discharges. IET Generation, Transmission & Distribution, 11, (9), p. 2384-2392.

Han Yu-Mei et Chen X-Grant. (2015). Electrochemical behavior of Al-B₄C metal matrix composites in NaCl solution. Materials, 8, (9), p. 6455-6470.

Hashjin Ra'na Rafiei, Ranjbar Zahra, Yari Hossein et Momen Gelareh. (2022). Tuning up sol-gel process to achieve highly durable superhydrophobic coating. Surfaces and Interfaces, 33, e102282.

Hedir Abdallah, Slimani Ferhat, Moudoud Mustapha, Omar Lamrous, Durmus Ali et Fofana Issouf. (2022). Effects of electrical aging on the structural and physicochemical properties of crosslinked polyethylene (XLPE) cable insulation material. Engineering Research Express,

Heidarzadeh Akbar, Javidani Mousa, Mofarrehi Mohammadreza, Farzaneh Amir et Chen X-Grant. (2021). Submerged dissimilar friction stir welding of AA6061 and AA7075 aluminum alloys: microstructure characterization and mechanical property. Metals, 11, (10), e1592.

Heidarzadeh Akbar, Javidani Mousa, Mofarrehi Mohammadreza, Motalleb-nejad Pouyan, Mohammadzadeh Roghayeh, Jafarian Hamidreza et Chen X-Grant. (2023). Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion. Materials, 16, (3), e944.

Heidarzadeh Akbar, Khorshidi Mahsa, Mohammadzadeh Roghayeh, Khajeh Rasoul, Mofarrehi Mohammadreza, Javidani Mousa et Chen X-Grant. (2023). Multipass friction stir processing of laser-powder bed fusion AlSi10Mg: microstructure and mechanical properties. Materials, 16, e1559.

Hemmatjou Hossein, Farzaneh Masoud et Fofana Issouf. (2007). Modeling of the AC Arc discharge on snow-covered insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1390-1400.

Hendel Mounia, Meghnefi Fethi, Senoussaoui Mohammed El Amine, Fofana Issouf et Brahami Mostefa. (2023). Using Generic Direct M-SVM Model Improved by Kohonen Map and Dempster–Shafer Theory to Enhance Power Transformers Diagnostic. Sustainability, 15, (21), e15453.

Hermosilla-Lara Guillaume, Momen Gelareh, Marty Philippe, Le Neindre B. et Hassouni Khaled. (2007). Hydrogen storage by adsorption on activated carbon: Investigation of the thermal effects during the charging process. International Journal of Hydrogen Energy, 32, (10-11), p. 1542-1553.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi et Chen X-Grant. (2019). Evaluation of the growth kinetics of θ′ and θ-Al2Cu precipitates in a binary Al-3.5 Wt Pct Cu alloy. Metallurgical and Materials Transactions A, 50, (7), p. 3048-3060.

Heugue Pierre, Larouche Daniel, Breton Francis, Martinez Rémi, Chen X-Grant et Massinon Denis. (2022). Modelling of strain-controlled thermomechanical fatigue testing of cast AlSi7Cu3.5Mg0.15 (Mn, Zr, V) alloy for different aging conditions. Metals, 12, e1258.

Heugue Pierre, Larouche Daniel, Breton Francis, Massinon Denis, Martinez Rémi et Chen X-Grant. (2019). Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu3.5Mg0.15 cast alloy with Zr and V additions. Metals, 9, (7), e777.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2023). Icephobic behavior of a slippery coating containing nanoporous particles as lubricant-loaded carriers. Surfaces and Interfaces, 41, e103306.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2021). Recent progress in the anti-icing performance of slippery liquid-infused surfaces. Progress in Organic Coatings, 151, e106096.

Heydarian Samaneh, Maghsoudi Khosrow, Jafari Reza, Gauthier Hellene et Momen Gelareh. (2022). Fabrication of liquid-infused textured surfaces (LITS): The effect of surface textures on anti-icing properties and durability. Materials Today Communications, 32, e103935.

Heydarian Samaneh, Momen Gelareh et Jafari Reza. (2023). Icephobicity and electrical assessment of slippery coating impregnated with a stabilized hydroxyl-terminated lubricant for high voltage insulation application. Journal of Materials Science, 58, (22), p. 9264-9281.

Hidouri Slah, Jafari Reza et Momen Gelareh. (2024). Development of a polydimethylsiloxane–Eucalyptus essential oil antibacterial coating. Journal of Coatings Technology and Research, 21, (2), p. 747-760.

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. (2008). Wind turbine performance under icing conditions. Wind Energy, 11, (4), p. 319-333.

Hu Mingxuan, He Min, Su Wei et Chehri Abdellah. (2020). A TextCNN and WGAN-gp based deep learning frame for unpaired text style transfer in multimedia services. Multimedia Systems,

Hu Peng, Liu Kun, Pan Lei et Chen X-Grant. (2022). Effect of Mg microalloying on elevated-temperature creep resistance of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 851, e143649.

Hu Peng, Liu Kun, Pan Lei et Chen X-Grant. (2023). Effects of individual and combined additions of transition elements (Zr, Ti and V) on the microstructure stability and elevated-temperature properties of Al–Cu 224 cast alloys. Materials Science and Engineering: A, 867, e144718.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2016). Characterization of carbon anode materials by image analysis. Light Metals, p. 859-864.

Huang Xianai, Kocaefe Duygu, Boluk Yaman, Kocaefe Yasar S. et Pichette André. (2012). Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids. European Journal of Wood and Wood Products, 70, (5), p. 711-717.

Huang Xianai, Kocaefe Duygu, Boluk Yaman et Krause Cornelia. (2013). Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weathering. Applied Surface Science, 264, p. 117-127.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as a raw material for carbon anode production. Energy Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu et Kocaefe Yasar S.. (2018). Utilization of biocoke as raw material for carbon anode production. Energy and Fuels, 32, (8), p. 8537-8544.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Interaction of bio-coke with different coal tar pitches. Fuel, 179, p. 179-192.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. (2016). Wettability of bio-coke by coal tar pitch for its use in carbon anodes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 490, p. 133-144.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Changes in wettability of heat-treated wood due to artificial weathering. Wood Science and Technology, 46, (6), p. 1215-1237.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). A spectrocolorimetric and chemical study on color modification of heat-treated wood during artificial weathering. Applied Surface Science, 258, (14), p. 5360-5369.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S., Boluk Yaman et Pichette André. (2012). Study of the degradation behavior of heat-treated jack pine (Pinus banksiana) under artificial sunlight irradiation. Polymer Degradation and Stability, 97, (7), p. 1197-1214.

Huang Xianai, Kocaefe Duygu, Kocaefe Yasar S. et Pichette André. (2018). Combined effect of acetylation and heat treatment on the physical, mechanical and biological behavior of jack pine (Pinus banksiana) wood. European Journal of Wood and Wood Products, 76, (2), p. 525-540.

Huang Xianai, Kocaefe Duygu, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Coulombe Patrick. (2016). Investigation on the structure of carbonized pitch and calcined coke-carbonized pitch interface in carbon anodes by etching. Journal of Materials Research, 31, (22), p. 3513-3521.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2016). Fabrication of corrosion resistance micro-nanostructured superhydrophobic anodized aluminum in a one-step electrodeposition process. Metals, 6, (3), p. 47.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2011). Fabrication of Superhydrophobic Surfaces on Aluminum Alloy Via Electrodeposition of Copper Followed by Electrochemical Modification. Nano-Micro Letters, 3, (3), p. 160-165.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2010). A one-step process to engineer superhydrophobic copper surfaces. Materials Letters, 64, (24), p. 2722-2724.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied Surface Science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties. Applied surface science, 356, p. 1012-1024.

Huang Ying, Sarkar Dilip K. et Chen X-Grant. (2015). Superhydrophobic nanostructured ZnO thin films on aluminum alloy substrates by electrophoretic deposition process. Applied Surface Science, 237, p. 327-334.

Huang Ying, Sarkar Dilip K., Gallant Danick et Chen X-Grant. (2013). Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process. Applied Surface Science, 282, p. 689-694.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2009). A hybrid wind-diesel-compressed air system for remote telecom infrastructures = Système hybride éolien-diesel avec stockage d'air comprimé pour l'électrification d'une station de télécommunications isolée. European Journal of Electrical Engineering, 12, (5-6), p. 701-731.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Ghandour M., Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. (2011). Integration of wind energy into electricity systems : technical challenges and actual solutions. Energy Procedia, 6, p. 815-824.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Energy storage systems : characteristics and comparisons. Renewable and Sustainable Energy Reviews, 12, (5), p. 1221-1250.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. (2010). Study and design of a hybrid wind-diesel-compressed air energy storage system for remote areas. Applied Energy, 87, (5), p. 1749-1762.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian et Perron Jean. (2007). Investigation des générateurs hybrides d'électricité de type éolien-air comprimé. Revue des énergies renouvelables, p. 47-50.

Ibrahim Hussein, Younès Rafic, Ilinca Adrian, Ramdenee D., Dimitrova Mariya Hristova, Perron Jean, Adegnon M., Boulay D. et Arbez C.. (2011). Potential of a hybrid wind-diesel-compressed air system for nordic remote canadian areas. Energy Procedia, 6, p. 795-804.

Jabbari Marouane, Volat Christophe et Farzaneh Masoud. (2013). A new single-arc AC dynamic FEM model of arc propagation on ice surfaces. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642123), p. 360-364.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2014). Application of a new dynamic numerical model to predict polluted insulator flashover voltage. 2014 IEEE Electrical Insulation Conference (EIC), 2014, (14501800), p. 102-106.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2018). Comparison of different residual resistance calculation methods used in predictive insulator flashover models. 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 2018, (18304515), p. 301-304.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2018). Development of a new bi-arc dynamic numerical model for modeling AC flashover processes of EHV ice-covered insulators. Energies, 11, (10), p. 2792-2814.

Jabbari Marouane, Volat Christophe et Fofana Issouf. (2018). Numerical modelling of ice-covered insulator flashover : the influence of arc velocity and arc propagation criteria. Energies, 11, (10), p. 2807.

Jafari Reza, Arefi-Khonsari F., Tatoulian M., Le Clerre D., Talini L. et Richard F.. (2009). Development of oligonucleotide microarray from plasma polymerized acrylic acid. Thin Solid Films, 517, (19), p. 5763-5768.

Jafari Reza, Cloutier Come, Allahdini Anahaita et Momen Gelareh. (2019). Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces. The International Journal of Advanced Manufacturing Technology, 103, p. 1225-1238.

Jafari Reza et Farzaneh Masoud. (2013). Development a simple method to create the superhydrophobic composite coatings. Journal of Composite Materials, 47, (25), p. 3125-3129.

Jafari Reza, Foroughi Mobarakeh Landan et Farzaneh Masoud. (2012). Water-Repellency Enhancement of Nanostructured Plasma-Polymerized HMDSO Coatings Using Grey-Based Taguchi Method. Nanoscience and Nanotechnology Letters, 4, (3), p. 369-374.

Jafari Reza, Momen Gelareh et Eslami Esmaeil. (2018). Fabrication of icephobic aluminium surfaces by atmospheric plasma jet polymerisation. Surface Engineering, 35, (5), p. 450-455.

Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2016). Durability enhancement of icephobic fluoropolymer film. Journal of Coatings Technology and Research, 13, (3), p. 405-412.

Jafari Reza, Séguin Sara, Fofana Issouf, Fleten Stein-Erik et Aasgård E. K.. (2023). Short-term hydropower optimization in the day-ahead market using a nonlinear stochastic programming model. Energy Systems,

Jafari Reza, Tatoulian M. et Arefi-Khonsari F.. (2011). Improvement of the stability of plasma polymerized acrylic acid coating deposited on PS beads in a fluidized bed reactor. Reactive and Functional Polymers, 71, (4), p. 520-524.

Jafari Reza, Tatoulian M., Morscheidt W. et Arefi-Khonsari F.. (2006). Stable Polymerized Acrylic Acid coating deposited on Polyethylene (PE) films in a low frequency discharge. Reactive and Functional Polymers, 66, (12), p. 1757-1765.

Jalbert Jocelyn, Rodriguez-Celis Esperanza M., Arroyo-Fernandez Osca H., Duchesne Steve et Morin Brigitte. (2019). Methanol marker for the detection of insulating paper degradation in transformer insulating oil. Energies, 12, (20), p. 3969.

Jalili Kashtiban Yavar, Saeidi Ali, Farinas Marie-Isabelle et Quirion Marco. (2021). A review on existing methods to assess hydraulic erodibility downstream of dam spillways. Water, 13, (22), p. 3205.

Jann Jessica, Drevelle Olivier, Chen X-Grant, Auclair-Gilbert Myriam, Soucy Gervais, Faucheux Nathalie et Fortier Louis-Charles. (2021). Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria. RSC Advances, 11, (60), p. 38172-38188.

Javadi H., Farzaneh Masoud, Hemmatjou Hossein et Fofana Issouf. (2008). An analytic model to simulate leakage current of a snow‐covered insulator. European Transactions on Electrical Power, 18, (4), p. 403-422.

Javan-Mashmool Mandana, Volat Christophe et Farzaneh Masoud. (2006). A new method for measuring ice adhesion strength at an ice–substrate interface. Hydrological Processes, 20, (4), p. 645-655.

Javidani Mousa, Arreguin-Zavala J., Danovitch J., Tian Y. et Brochu M.. (2017). Additive manufacturing of AlSi10Mg alloy using direct energy deposition: microstructure and hardness characterization. Journal of Thermal Spray Technology, 26, (4), p. 587-597.

Javidani Mousa et Larouche Daniel. (2014). Application of cast Al–Si alloys in internal combustion engine components. International Materials Reviews, 59, (3), p. 132-158.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2015). Assessment of post-eutectic reactions in multicomponent Al-Si foundry alloys containing Cu, Mg, and Fe. Metallurgical and Materials Transactions A, 46, (7), p. 2933-2946.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2016). Dissolution of Cu/Mg bearing intermetallics in Al-Si foundry alloys. Metallurgical and Materials Transactions A, 47, (10), p. 4818-4830.

Jayasree T., Fofana Issouf, Rozga Pawel, Ungarala Mohan Rao, Strzelecki K., Brettschneider Stephan, Picher Patrick, Rodriguez Celis E. et Stuchala F.. (2023). Analysis of Breakdown Voltage of Low Pour Point Synthetic Ester Insulating Liquids under Lightning Impulse Voltage of both Polarities. IEEE Transactions on Dielectrics and Electrical Insulation,

Jayasree T., Rozga Pawel, Fofana Issouf, Mohan Rao Ungarala, Brettschneider Stephan, Picher Patrick et Rodriguez Celis E.. (2023). Prebreakdown and Breakdown Behaviour of Low Pour Point Dielectric Liquids Under Negative Lightning Impulse Voltage. IEEE Transactions on Dielectrics and Electrical Insulation, 30, (4), p. 1470-1477.

Jayasree T., Ungarala Mohan Rao, Fofana Issouf, Brettschneider Stephan, Rodriguez-Celis Esperanza et Picher Patrick. (2021). Pre-breakdown Phenomena and Influence of Aging Byproducts in Thermally Aged Low Pour Point Ester Fluids Under AC Stress. IEEE Transactions on Dielectrics and Electrical Insulation, 28, (5), p. 1563-1570.

Jbene Mourad, Tigani Smail, Saadane Rachid et Chehri Abdellah. (2021). Deep Neural Network and Boosting Based Hybrid Quality Ranking for e-Commerce Product Search. Big Data and Cognitive Computing, 5, (3), p. 35.

Jemmali Mohamed Ali, Otis Martin J.-D. et Ellouze Mahmoud. (2019). Robust stabilization for discrete-time Takagi-Sugeno fuzzy system based on N4SID models. Engineering Computations, 36, (4), p. 1400-1427.

Jeon Gwanggil, Abdellah Chehri, Cuomo Salvatore, Din Sadia et Jabbar Sohail. (2021). Special issue on real‐time behavioral monitoring in IoT applications using big data analytics. Concurrency and Computation: Practice and Experience, 33, (4), e5529.

Jeon Gwanggil, Ahmad Awais, Chehri Abdellah et Albertini Marcelo Keese. (2021). Guest editorial : Special Issue on Design Architecture and Applications of Smart Embedded Devices in Internet of Things. Journal of Systems Architecture, 115, e102018.

Jeon Gwanggil, Ahmad Awais, Chehri Abdellah et Cuomo Salvatore. (2020). Special issue on video and imaging systems for critical engineering applications [SI 1096]. Multimedia Tools and Applications, 79, p. 8327-8335.

Jeon Gwanggil, Bellandi Valerio et Chehri Abdellah. (2020). Editorial for the Special Issue “Advanced Machine Learning for Time Series Remote Sensing Data Analysis”. Remote Sensing, 12, (17), p. 2815.

Jeon Gwanggil et Chehri Abdellah. (2021). Computing techniques for environmental research and public health. International Journal of Environmental Research and Public Health, 18, (18), e9851.

Jeon Gwanggil et Chehri Abdellah. (2020). Entropy-based algorithms for signal processing. Entropy, 22, (6), p. 621.

Jeon Gwanggil et Chehri Abdellah. (2021). Introduction to the special section on Security and Privacy Issues in Smart Grid by Applying Deep Learning Techniques (VSI-gridl). Computers & Electrical Engineering, 93, e107331.

Jeon Gwanggil et Chehri Abdellah. (2021). Special issue on applied computational intelligence. Concurrency and Computation: Practice and Experience, 33, (22),

Jeon Gwanggil et Chehri Abdellah. (2021). Special issue on deep learning for emerging embedded real-time image and video processing systems. Journal of Real-Time Image Processing, 18, (4), p. 1167-1171.

Jin L., Liu Kun et Chen X-Grant. (2020). Improved elevated temperature properties in Al-13%Si piston alloys by Mo addition. Journal of Materials Engineering and Performance, 29, (1), p. 126-134.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2020). Evolution of dispersoids and their effects on elevated-temperature strength and creep resistance in Al-Si-Cu 319 cast alloys with Mn and Mo additions. Materials Science and Engineering: A, 770, p. 138554.

Jin Lanfeng, Liu Kun et Chen X-Grant. (2019). Evolution of Fe-Rich intermetallics in Al-Si-Cu 319 cast alloy with various Fe, Mo, and Mn contents. Metallurgical and Materials Transactions B, 50, (4), p. 1896-1907.

Kamali Kaveh, Akbari Ali Akbar, Desrosiers Christian, Akbarzadeh Alireza, Otis Martin J.-D. et Ayena Johannes C.. (2020). Low-rank and sparse recovery of human gait data. Sensors, 20, (16), p. 1-13.

Kamel Ouari, Ouhrouche Mohand, Rekioua Toufik et Nabil Taib. (2015). Nonlinear Predictive Control of Wind Energy Conversion System Using Dfig with Aerodynamic Torque Observer. Journal of Electrical Engineering, 65, (6), p. 333-341.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Hot tearing of aluminum-copper B206 alloys with iron and silicon additions. Materials Science and Engineering A : Structural Materials: Properties, Microstructure and Processing, 527, (27-28), p. 7413-7423.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2012). Mechanical properties of aluminium-copper B206 alloys with iron and silicon additions. International Journal of Cast Metals Research, 25, (1), p. 15-25.

Kamguo Kamga Honoré, Larouche Daniel, Bournane Mohamed et Rahem Ahmed. (2010). Solidification of aluminum-copper B206 alloys with iron and silicon additions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41, (11), p. 2844-2855.

Kassi Koutoua Simon, Farinas Marie-Isabelle, Fofana Issouf et Volat Christophe. (2016). Analysis of aged oil on the cooling of power transformers from computational fluid dynamics and experimental measurements. Journal of Applied Fluid Mechanics, 9, (SI 2), p. 235-243.

Kassi Koutoua Simon, Fofana Issouf, Meghnefi Fethi et Yéo Zié. (2015). Impact of local overheating on conventional and hybrid insulations for power transformers. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2543-2553.

Keshavarzi Samaneh, Bouazara Bassem, Momen Gelareh et Jafari Reza. (2023). Hydrophobicity and icephobicity of micropillared silicone rubber surfaces fabricated by compression molding. Results in Surfaces and Interfaces, 12, e100132.

Keshavarzi Samaneh, Entezari A., Maghsoudi Khosrow, Momen Gelareh et Jafari Reza. (2022). Ice nucleation on silicone rubber surfaces differing in roughness parameters and wettability: Experimental investigation and machine learning–based predictions. Cold Regions Science and Technology, 203, e103659.

Keshavarzi Samaneh, Sourati Jamshid, Momen Gelareh et Jafari Reza. (2022). Temperature-dependent droplet impact dynamics of a water droplet on hydrophobic and superhydrophobic surfaces: An experimental and predictive machine learning–based study. International Journal of Heat and Mass Transfer, 195, e123190.

Khademsameni Helya, Jafari Reza, Allahdini Anahita et Momen Gelareh. (2024). Regenerative Superhydrophobic Coatings for Enhanced Performance and Durability of High-Voltage Electrical Insulators in Cold Climates. Materials, 17, (7), e1622.

Khangholi Siamak Nikzad, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2022). Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments. Journal of Alloys and Compounds, 914, e165242.

Khangholi Siamak Nikzad, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2022). Review on recent progress in Al–Mg–Si 6xxx conductor alloys. Journal of Materials Research, 37, (3), p. 670-691.

Khelil Nawel et Otis Martin J.-D.. (2016). Finite-time stabilization of homogeneous non-Lipschitz systems. Mathematics, 4, (58), p. 1-14.

Khoshbin Elham, Youssef Khaled, Meziane Ramy et Otis Martin J.-D.. (2022). Reconfigurable fully constrained cable-driven parallel mechanism for avoiding collision between cables with human. Robotica, p. 1-26.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Study of the degradation of heat-treated jack pine under different artificial weathering conditions. International Journal of Energy and Environment, 7, (3), p. 97-106.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Quantitative characterization of chemical degradation of heat-treated wood surfaces during artificial weathering using XPS. Surface and Interface Analysis, 45, (2), p. 639-649.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. (2013). Study of weathering behavior of jack pine heat-treated under different conditions. Journal of Energy and Power Engineering, 7, p. 818-826.

Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sanogo Bazoumana, Ahoutou Yao, Sun Hang et Coulombe Patrick. (2017). Development of techniques and tools for the determination of carbon anode quality. Light Metals, p. 1247-1254.

Kocaefe Duygu, Kocaefe Yasar S., Younsi Ramdane, Oumarou Noura et Lekounougou S. Thierry. (2013). Mathematical modelling of the high temperature treatment of birch in a prototype furnace. Advances in Mechanical Engineering, 5,

Kocaefe Duygu et Saha Sudeshna. (2012). Comparison of the protection effectiveness of acrylic polyurethane coatings containing bark extracts on three heat-treated North American wood species: Surface degradation. Applied Surface Science, 258, (13), p. 5283-5290.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. (2013). Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Journal of Energy and Power Engineering, 7, p. 1198-1205.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interaction between coke and pitch in anode manufacturing. Light Metals, p. 1045-1050.

Kocaefe Duygu, Sarkar Dilip K. et Chen X-Grant. (2012). Effect of Ti addition on the wettability of Al-B4C metal matrix composites. International Journal of materials research, 103, (6), p. 729-736.

Kocaefe Duygu, Xie Yadian, Kocaefe Yasar S., Wei Liu, Zou Shaoling et Wu Anjing. (2013). Thermogravimetric study on devolatilization kinetics of Chinalco anodes during baking. Journal of Materials Science Research, 2, (2), p. 22-34.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. (2011). Recipe adaptation and new recipe development for high temperature heat treatment of North American wood species. International Journal of Energy, Environment, and Economics, 19, (3), p. 257-278.

Kocaefe Yasar S., Kocaefe Duygu et Bhattacharyay Dipankar. (2015). Quality control via electrical resistivity measurement of industrial anodes. Light Metals, p. 1097-1102.

Kocaefe Yasar S., Kocaefe Duygu, Bhattacharyay Dipankar, Benzaoui Abderrahmane et Desmeules Jean-François. (2020). Testing of SERMA technology on industrial anodes for quality control for aluminum production. Light Metals, 2020, p. 1189-1195.

Kocaefe Yasar S., Oumarou Noura, Baiteche Mounir, Kocaefe Duygu, Morais Brigitte et Gagnon Marc. (2013). Use of mathematical modelling to study the behavior of a horizontal anode baking furnace. Light Metals, p. 1139-1144.

Koffi Thomas, Kassi Koutoua S., Kone Gbah, N'cho Janvier Sylvestre, Edoé Mensah, Bosson Jocelyne, Fofana Issouf et Zoueu Jérémie. (2022). Using structured laser illumination planar imaging (SLIPI) as a new technique to monitor the degradation of biodegradable oils in electrical power transformers. IET Generation, Transmission & Distribution, p. 1-12.

Kone Gbah et Volat Christophe. (2018). Comparison of the volume and surface approaches to compute temperature and electric field along the stress-grading on stators bars. Annual report - Conference on Electrical Insulation and Dielectric Phenomena, 2018, (8544739), p. 461-464.

Kone Gbah, Volat Christophe et Ezzaidi Hassan. (2014). 3D numerical investigation of internal defects in a 28 kV composite insulator. 2014 IEEE Electrical Insulation Conference (EIC), 2014, (14501859), p. 208-212.

Kone Gbah, Volat Christophe et Ezzaidi Hassan. (2017). Numerical investigation of electric field distortion induced by internal defects in composite insulators. High Voltage, 2, (4), p. 253-260.

Kone Gbah, Volat Christophe, Hudon Claude et Bernier Simon. (2020). Experimental investigation of the spatial and temporal evolution of the tangential and normal E-Field components along the stress grading system of a real stator bar. Energies, 13, (3), p. 534.

Koulibaly Aboubacar Sidiki, Saeidi Ali, Rouleau Alain et Quirion Marco. (2021). Identification of hydraulic parameters influencing the hydraulic erodibility of spillway flow channels. Water, 13, (21), p. 2950.

Kumar Virendra, Jolivalt Claude, Pulpytel Jerome, Jafari Reza et Arefi-Khonsari Farzaneh. (2013). Development of silver nanoparticle loaded antibacterial polymer mesh using plasma polymerization process. Journal of Biomedical Materials Research: Part A, 101A, p. 1121-1132.

Laforte Caroline et Laforte Jean-Louis. (2012). Deicing strains and stresses of iced substrates. Journal of Adhesion Science and Technology, 26, (4-5), p. 603-620.

Laforte Caroline et Tremblay Marc Mario. (2017). Comparative evaluation of the anti-icing protection time of runway deicers using infrared thermography. Cold Regions Science and Technology, 138, p. 57-62.

Laforte Jean-Louis, Allaire M. A. et Laflamme J.. (1998). State-of-the-art on power line de-icing. Atmospheric Research, 46, (1-2), p. 143-158.

Laforte Jean-Louis, Bouchard Gilles et Louchez Patrick R.. (1992). Aircraft take-off laboratory simulation for de/anti-icing study. Canadian Aeronautics and Space Journal, 38, (4), p. 183-193.

Laforte Jean-Louis, Louchez P. R. et Bouchard Gilles. (1993). Experimental evaluation of flat plate boundary layer growth over an anti-icing fluid film. Canadian Aeronautics and Space Journal, 39, (2), p. 96-104.

Laforte Jean-Louis, Louchez Patrick R. et Bouchard Gilles. (1992). Cold and humid environment simulation for de/anti-icing fluids evaluation. Cold Regions Science and Technology, 20, (2), p. 195-206.

Lamine Amrani Mohamed, Bouazabia Slimane, Fofana Issouf, Meghnefi Fethi, Jabbari Marouane, Khelil Djazia et Boudiaf Amina. (2021). Modelling surface electric discharge propagation on polluted insulators under AC voltage. Energies, 14, (20), p. 6653.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing : From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Benoit Robert, Perron Jean, Fortin Guy et Masson Christian. (2015). Hybrid fine scale climatology and microphysics of in-cloud icing: From 32km reanalysis to 5km mesoscale modeling. Atmospheric Research, 154, p. 175-190.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2014). Atmospheric icing impact on wind turbine production. Cold Regions Science and Technology, 100, p. 36-49.

Lamraoui Fayçal, Fortin Guy, Benoit Robert, Perron Jean et Masson Christian. (2013). Atmospheric icing severity : quantification and mapping. Atmospheric Research, 128, p. 57-75.

Lamraoui Fayçal, Fortin Guy, Perron Jean et Benoit Robert. (2015). Canadian icing envelopes near the surface and its impact on wind energy assessment. Cold Regions Science and Technology, 120, p. 76-88.

Larouche Daniel et Javidani Mousa. (2015). Mathematical analysis of the heat measured by a power-compensated differential scanning calorimeter during the solidification of a multiphase alloy. Journal of Thermal Analysis and Calorimetry, 122, (1), p. 197-205.

Lazrag Hilmi, Chehri Abdellah, Saadane Rachid et Rahmani Moulay Driss. (2020). Efficient and secure routing protocol based on Blockchain approach for wireless sensor networks. Concurrency and Computation : Practice and Experience, e6144.

Lekounougou S. Thierry et Kocaefe Duygu. (2013). Bioresistance of thermally-modified Populus tremuloides (North American Aspen) wood against four decay fungi. International Wood Products Journal, 4, (1), p. 46-51.

Lekounougou S. Thierry et Kocaefe Duygu. (2012). Comparative study on the durability of heat-treated White Birch (Betula papyrifera) subjected to the attack of brown and white rot fungi. Wood Material Science & Engineering, 7, (2), p. 101-106.

Lekounougou S. Thierry et Kocaefe Duygu. (2014). Durability of thermally modified Pinus banksiana (Jack pine) wood against brown and white rot fungi. International Wood Products Journal, 5, (2), p. 92-97.

Lekounougou S. Thierry et Kocaefe Duygu. (2014). Effect of thermal modification temperature on the mechanical properties, dimensional stability, and biological durability of black spruce (Picea mariana). Wood Material Science & Engineering, 9, (2), p. 59-66.

Lekounougou S. Thierry, Kocaefe Duygu, Oumarou Noura, Kocaefe Yasar S. et Poncsák Sándor. (2011). Effect of thermal modification on mechanical properties of Canadian White Birch (Betula papyrifera). International Wood Products Journal, 2, (2), p. 101-107.

Lévesque Yan, Chesnaux Romain et Walter Julien. (2023). Using geophysical data to assess groundwater levels and the accuracy of a regional numerical flow model. Hydrogeology Journal,

Li Chen, Liu Kun et Chen X-Grant. (2020). Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology, 39, p. 135-143.

Li Dong, Liu Kun et Chen X-Grant. (2023). Evolution of Microstructure and Elevated-Temperature Properties during Thermal Exposure with Transition Elements (V, Zr and Mo) in Al–Si 356 Type Cast Alloys. MATERIALS TRANSACTIONS, 64, (2), p. 406-413.

Li Dong, Liu Kun et Chen X-Grant. (2020). Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02003),

Li Dong, Liu Kun, Rakhmonov Jovid et Chen X-Grant. (2021). Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys. Materials Science and Engineering: A, 827, e142090.

Li J. S., Raoelison R. N., Sapanathan T., Zhang Zhan, Chen X-Grant, Marceau Daniel, Hou Y. L. et Rachik M.. (2020). An anomalous wave formation at the Al/Cu interface during magnetic pulse welding. Applied Physics Letters, 116, (161601),

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). Effect of metastable Mg2Si and dislocations on α-Al(MnFe)Si dispersoid formation in Al-Mn-Mg 3xxx alloys. Metallurgical and Materials Transactions A, 49, (11), p. 5799-5814.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). Improvement in the mechanical properties and creep resistance of Al-Mn-Mg 3004 alloy with Sc and Zr addition. Materials Science and Engineering: A, 729, p. 196-207.

Li Zhen, Zhang Zhan et Chen X-Grant. (2018). The Influence of Cu addition on dispersoid formation and mechanical properties of Al-Mn-Mg 3004 alloy. Metals, 8, (3), e155.

Li Zhen, Zhang Zhan et Chen X-Grant. (2017). Microstructure, elevated-temperature mechanical properties and creep resistance of dispersoid-strengthened Al-Mn-Mg 3xxx alloys with varying Mg and Si contents. Materials Science and Engineering: A, 708, p. 383-394.

Liu Kun et Chen X-Grant. (2017). Evolution of microstructure and elevated-temperature properties with Mn addition in Al–Mn–Mg alloys. Journal of Materials Research, p. 1-9.

Liu Kun et Chen X-Grant. (2018). Improvement in elevated-temperature properties of Al–13% Si piston alloys by dispersoid strengthening via Mn addition. Journal of Materials Research, 33, (20), p. 3430-3438.

Liu Kun et Chen X-Grant. (2017). Influence of heat treatment and its sequence on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Materials Science and Engineering: A, 697, p. 141-148.

Liu Kun et Chen X-Grant. (2019). Influence of the modification of iron-bearing intermetallic and eutectic Si on the mechanical behavior near the solidus temperature in Al-Si-Cu 319 cast alloy. Physica B: Condensed Matter, 560, p. 126-132.

Liu Kun, Elgallad Emad, Li Chen et Chen X-Grant. (2021). Effects of Zr and Sc additions on precipitation of α-Al(FeMn)Si dispersoids under various heat treatments in Al–Mg–Si AA6082 alloys. International Journal of Materials Research, 112, (9), p. 706-716.

Liu Kun, Li Chen et Chen X-Grant. (2020). Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (03001),

Liu Kun, Ma Hezhaoye et Chen X-Grant. (2018). Improving the Elevated-Temperature Properties by Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys. Metallurgical and Materials Transactions B, 49, (4), p. 1588-1596.

Liu Kun, Mirza Foisal Ahmed et Chen X-Grant. (2018). Effect of overaging on the cyclic deformation behavior of an AA6061 aluminum alloy. Metals, 8, (7), e528.

Liu Kun, Nabawy Ahmed et Chen X-Grant. (2017). Influence of TiB2 nanoparticles on elevated-temperature properties of Al-Mn-Mg 3004 alloy. Transactions of Nonferrous Metals Society of China, 27, (4), p. 771-778.

Liu Kun, Wang Shuai, Hu Peng, Pan Lei et Chen X-Grant. (2023). Improved Thermo-Mechanical Fatigue Resistance of Al-Si-Cu 319 Alloys by Microalloying with Mo. Materials, 16, (9), e3515.

Liu Kun, Wang Shuai, Pan Lei et Chen X-Grant. (2023). Thermo-Mechanical fatigue behavior and resultant microstructure evolution in Al-Si 319 and 356 cast alloys. Materials, 16, (2), p. 829.

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2019). Investigation of the quench sensitivity of an AlSi10Mg alloy in permanent mold and high-pressure vacuum die wastings. Materials, 12, (11), e1876.

Liu Mengyun, Zhang Zhan, Breton Francis et Chen X-Grant. (2020). Quench sensitivity and phase transformation kinetics of AlSi7MnMg high pressure vacuum die casting. The 17th International Conference on Aluminium Alloys 2020 (ICAA17), 326, (02001),

Loiselle Luc, Fofana Issouf, Sabau John, Magdaleno-Adame Salvador et Olivares-Galvan Juan Carlos. (2015). Comparative studies of the stability of various fluids under electrical discharge and thermal stresses. IEEE Transactions on Dielectrics and Electrical Insulation, 22, (5), p. 2491-2499.

Loiselle Luc, Ungarala Mohan Rao et Fofana Issouf. (2020). Gassing tendency of fresh and aged mineral oil and ester fluids under electrical and thermal fault conditions. Energies, 31, (13), p. 2472.

Loiselle Luc, Ungarala Mohan Rao et Fofana Issouf. (2020). Influence of ageing on oil degradation and gassing tendency under high-energy electrical discharge faults for mineral oil and synthetic ester. High Voltage, 5, (6), p. 731-738.

Loiselle Luc, Ungarala Mohan Rao et Fofana Issouf. (2020). Influence of aging on oil degradation and gassing tendency for mineral oil and synthetic ester under low energy discharge electrical faults. Energies, 13, (3), p. 595.

Loiselle Luc, Ungarala Mohan Rao, Fofana Issouf et Jaya T.. (2020). Monitoring colloidal and dissolved decay particles in ester dielectric fluids. IEEE Transactions on Dielectrics and Electrical Insulation, 27, (5), p. 1516-1524.

Loubeba Bekri Oum El Fadhel, Chehri Abdellah, Djamah Tounsia et Fellah Mohamed Karim. (2020). SVC device optimal location for voltage stability enhancement based on a combined particle swarm optimization-continuation power flow technique. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18, (4), p. 2101-2111.

Louchez P. R., Laforte Jean-Louis, Bouchard Gilles et Farzaneh Masoud. (1995). Laboratory evaluation of aircraft ground de/antiicing products. International Journal of Offshore and Polar Engineering, 5, (1),

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Coulombe Patrick. (2016). Study of the wettability of coke by different pitches and their blends. Energy and Fuels, 30, (11), p. 9210-9216.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Huang Xianai et Morais Brigitte. (2016). Study of the wetting of coke by different pitches. Light Metals, p. 871-876.

Lu Ying, Kocaefe Duygu, Kocaefe Yasar S., Huang Xianai et Bhattacharyay Dipankar. (2017). The wettability of coke by pitches with different quinoline-insoluble contents. Fuel, 199, p. 587-597.

Lyutikova M., Korobeynikov S., Ungarala Mohan Rao et Fofana Issouf. (2022). Mixed Insulating Liquids with Mineral Oil for High Voltage Transformer Applications: A Review. IEEE Transactions on Dielectrics and Electrical Insulation,

Ma K., Elgallad Emad M., Chen Zhixing, Xiao B. L. et Chen X-Grant. (2022). Improving the elevated-temperature mechanical properties of AA3004 hot-rolled sheets by microalloying with Mo and optimizing the process route. Journal of Materials Research and Technology, 19, p. 4489-4503.

Ma K., Li X. N., Liu Kun, Chen X-Grant, Liu Z. Y., Xiao B. L. et Ma Zheyuan. (2021). Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zones. Composites Part B: Engineering, 222, e109094.

Ma K., Liu Z. Y., Liu Kun, Chen X-Grant, Xiao B. L. et Ma Zheyuan. (2021). Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon, 178, p. 190-201.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2016). Development of a stable TiO2 nanocomposite self-cleaning coating for outdoor applications. Advances in Materials Science and Engineering, 2016, e7958152.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2018). Dielectric properties of TiO2/Silicone Rubber micro- and nanocomposites. Advances in Materials Science and Engineering, 2018, e4682076.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2017). Micro-nanostructured polymer surfaces using injection molding : a review. Materials today communications, 13, p. 126-143.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2017). Micro-nanostructured polymer surfaces using injection molding: A review. Materials today communications, 13, p. 126-143.

Maghsoudi Khosrow, Momen Gelareh et Jafari Reza. (2023). The thermodynamic stability of the Cassie–Baxter regime determined by the geometric parameters of hierarchical superhydrophobic surfaces. Applied Materials Today, 34, e101893.

Maghsoudi Khosrow, Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2020). Evaluating the effect of processing parameters on the replication quality in the micro compression molding of silicone rubber. Materials and Manufacturing Processes, 35, (14), p. 1567-1575.

Maghsoudi Khosrow, Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2020). Advances in the fabrication of superhydrophobic polymeric surfaces by polymer molding processes. Industrial & Engineering Chemistry Research, 59, (20), p. 9343-9363.

Maghsoudi Khosrow, Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2021). Icephobicity and durability assessment of superhydrophobic surfaces: the role of surface roughness and the ice adhesion measurement technique. Journal of Materials Processing Technology, 288,

Mansur Eduardo T. et Barnes Sarah-Jane. (2020). The role of Te, As, Bi, Sn and Sb during the formation of platinum-group-element reef deposits: Examples from the Bushveld and Stillwater Complexes. Geochimica et Cosmochimica Acta, 272, p. 235-258.

Mansur Eduardo T., Barnes Sarah-Jane, Duran Charley J. et Sluzhenikin Sergey F.. (2020). Distribution of chalcophile and platinum-group elements among pyrrhotite, pentlandite, chalcopyrite and cubanite from the Noril’sk-Talnakh ores: implications for the formation of platinum-group minerals. Mineralium Deposita, 55, p. 1215-1232.

Mayer Christine, Ilinca Adrian, Fortin Guy et Perron Jean. (2007). Wind tunnel study of the electro-thermal de-icing of wind turbine blades. International Journal of Offshore and Polar Engineering, 17, (3), p. 182-188.

McLean John, Saeidi Ali, Chavali Rama Vara Prasad, Seifaddini Rashk Olia Mahdiyeh, Clement Andreanne, Barbarisque Thomas et Bilodeau Jean-Pascal. (2023). Adfreeze Strength of Wooden Piles in Warm Permafrost Soil. Journal of Cold Regions Engineering, 37, (2),

Meftali Nadia, Bouazabia Slimane, Fofana Issouf et El Maouhab Ali. (2018). Effect of injection barrier height on charge transport under bipolar injection. International Journal of Numerical Modelling, 32, (1), e2478.

Meghnefi Fethi, Farzaneh Masoud et Volat Christophe. (2005). Characterization of leakage current of a post station insulator covered with ice with various surface conductivities. CEIDP '05. 2005 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2005, p. 333-336.

Meghnefi Fethi, Farzaneh Masoud et Volat Christophe. (2008). Measurement of the evolution of dripping water conductivity of an ice-covered insulator during a melting period. 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2008, (10468513), p. 236-239.

Meghnefi Fethi, Volat Christophe et Farzaneh Masoud. (2007). Temporal and frequency analysis of the leakage current of a station post insulator during ice accretion. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1381-1389.

Meysami A. H., Ghasemzadeh R., Seyedein S. H., Aboutalebi M. R., Ebrahimi R. et Javidani Mousa. (2009). Physical simulation of hot deformation and microstructural evolution for 42CrMo4 steel prior to direct quenching. Journal of Iron and Steel Research International, 16, (6), p. 47-51.

Meziane Ramy, Cardou Philippe et Otis Martin J.-D.. (2019). Cable interference control in physical interaction for cable-driven parallel mechanisms. Mechanism and Machine Theory, 132, p. 30-47.

Meziane Ramy, Otis Martin J.-D. et Ezzaidi Hassan. (2017). Human-robot collaboration while Sharing Production Activities in Dynamic Environment : SPADER system. Robotics and Computer-Integrated Manufacturing, 48, p. 243-253.

Millet Guillaume, Otis Martin J.-D., Horodniczy Daniel et Cooperstock Jeremy R.. (2017). Design of variable-friction devices for shoe-floor contact. Mechatronics, 46, p. 115-125.

Mirza Foisal Ahmed, Macwan A., Bhole S.D., Chen D.L. et Chen X-Grant. (2016). Effect of welding energy on microstructure and strength of ultrasonic spot welded dissimilar joints of aluminum to steel sheets. Materials Science and Engineering: A, 668, p. 73-85.

Mirza Foisal Ahmed, Macwan A., Bhole S.D., Chen D.L. et Chen X-Grant. (2017). Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets. Materials Science and Engineering: A, 690, p. 323-336.

Mofarrehi Mohammadreza, Javidani Mousa et Chen X-Grant. (2021). On the intermetallic constituents in the sodium-induced edge cracking of hot-rolled AA5182 aluminum alloys. Philosophical Magazine, 101, (16), p. 1849-1870.

Moghadam Saba Goharshenas, Bakhshandeh Ehsan, Jafari Reza et Momen Gelareh. (2023). In-depth analysis of the effect of physicochemical properties of ionic liquids on anti-icing behavior of silicon based-coatings. Cold Regions Science and Technology, 216, e104007.

Mohamed Adel, Jafari Reza et Farzaneh Masoud. (2014). An optimization of superhydrophobic polyvinylidene fluoride/zinc oxide materials using Taguchi method. Applied Surface Science, 288, p. 229-237.

Mohammed Saber, Abdellah Chehri, Rachid Saadane, Yassine El Hafid, Abdessamad El Rharras et Mohammed Wahbi. (2021). Reconfigurable Intelligent Surfaces Supported Wireless Communications. Procedia Computer Science, 192, p. 2491-2501.

Momen Gelareh et Farzaneh Masoud. (2014). Facile approach in the development of icephobic hierarchically textured coatings as corrosion barrier. Applied surface science, 299, p. 41-46.

Momen Gelareh et Farzaneh Masoud. (2011). Simple process to fabricate a superhydrophobic coating. Micro & Nano Letters, 6, (6), p. 405-407.

Momen Gelareh et Farzaneh Masoud. (2012). Superhydrophobic RTV silicone rubber coatings on anodized aluminium surfaces. Materials Science Forum, 706-709, p. 2546-2551.

Momen Gelareh et Farzaneh Masoud. (2011). Survey of micro/nano filler use to improve silicone rubber for outdoor insulators. Reviews on Advanced Materials Science, 27, (1), p. 1-13.

Momen Gelareh et Farzaneh Masoud. (2012). A ZnO-based nanocomposite coating with ultra water repellent properties. Applied Surface Science, 258, (15), p. 5723-5728.

Momen Gelareh, Farzaneh Masoud et Jafari Reza. (2011). Wettability behaviour of RTV silicone rubber coated on nanostructured aluminium surface. Applied Surface Science, 257, (15), p. 6489-6493.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Pons M., Firdaous Mohamed et Hassouni Khaled. (2009). Hydrogen storage in an activated carbon bed: Effect of energy release on storage capacity of the tank. International Journal of Hydrogen Energy, 34, (9), p. 3799-3809.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Pons M., Firdaous Mohamed, Marty Philippe et Hassouni Khaled. (2009). Experimental and numerical investigation of the thermal effects during hydrogen charging in packed bed storage tank. International Journal of Heat and Mass Transfer, 52, (5-6), p. 1495-1503.

Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2015). Ice repellency behaviour of superhydrophobic surfaces: Effects of atmospheric icing conditions and surface roughness. Applied surface science, 349, p. 211-218.

Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2013). On the oil repellency of nanotextured aluminum surface. International Journal of Materials and Metallurgical Engineering, 7, (6), p. 463-467.

Momen Gelareh, Jafari Reza et Hassouni Khaled. (2010). On the effect of process temperature on the performance of activated carbon bed hydrogen storage tank. International Journal of Thermal Sciences, 49, (8), p. 1468-1476.

Moravej Maryam, Amira Sofiene, Prima Frédéric, Rahem Ahmed, Fiset Michel et Mantovani Diego. (2011). Effect of electrodeposition current density on the microstructure and the degradation of electroformed iron for degradable stents. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 176, (20), p. 1812-1822.

Motamedi Reza, Otis Martin J.-D. et Duchaine Vincent. (2017). The impact of simultaneously applying normal stress and vibrotactile stimulation for feedback of exteroceptive information. Journal of Biomechanical Engineering, 139, (6), 061004.

Moutik Oumaima, Tigani Smail, Saadane Rachid et Chehri Abdellah. (2021). Hybrid Deep Learning Vision-based Models for Human Object Interaction Detection by Knowledge Distillation. Procedia Computer Science, 192, p. 5093-5103.

Nanfak Arnaud, Eke Samuel, Kom Charles Hubert, Mouangue Ruben et Fofana Issouf. (2021). Interpreting dissolved gases in transformer oil: A new method based on the analysis of labelled fault data. IET Generation, Transmission and Distribution, p. 1-16.

Nanfak Arnaud, Eke Samuel, Meghnefi Fethi, Fofana Issouf, Ngaleu Gildas Martial et Kom Charles Hubert. (2023). Hybrid DGA method for power transformer faults diagnosis based on evolutionary k-means clustering and dissolved gas subsets analysis. IEEE Transactions on Dielectrics and Electrical Insulation, e3275119.

Nanfak Arnaud, Samuel Eke, Fofana Issouf, Meghnefi Fethi, Ngaleu Martial Gildas et Hubert Kom Charles. (2024). Traditional fault diagnosis methods for mineral oil‐immersed power transformer based on dissolved gas analysis: Past, present and future. IET Nanodielectrics, p. 1-34.

Nazari Babak, Ranjbar Zahra, Rafiei Hashjin Ra'na, Rezvani Moghaddam Amir, Momen Gelareh et Ranjbar Behnaz. (2019). Dispersing graphene in aqueous media: investigating the effect of different surfactants. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 582, e123870.

N'cho Janvier Sylvestre et Fofana Issouf. (2020). Review of fiber optic diagnostic techniques for power transformers. Energies, 13, (7), p. 1789.

N'cho Janvier Sylvestre, Fofana Issouf, Aka-Ngnui Thomas et Beroual Abderrahmane. (2011). Effect of Exposure to Electrical Discharge on Transformer Oil Properties. High Voltage Engineering, 37, (11), p. 2793-2799.

N'cho Janvier Sylvestre, Fofana Issouf et Beroual Abderrahmane. (2020). Pretreatment of Fuller's earth with nitrogen. Heliyon, 6, (3), e03643.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2012). Aged oils reclamation : facts and arguments based on laboratory studies. IEEE Transactions on Dielectrics and Electrical Insulation, 19, (5), p. 1583-1592.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2011). The gassing tendency of various insulating fluids under electrical discharge. IEEE Transactions on Dielectrics and Electrical Insulation, 18, (5), p. 1616-1625.

N'cho Janvier Sylvestre, Fofana Issouf, Beroual Abderrahmane, Aka-Ngnui Thomas et Sabau John. (2012). Verification of insulation oil reclamation by turbidity and spetrophotometry measurements. Journal of Energy and Power Engineering, 6, p. 703-712.

N'cho Janvier Sylvestre, Fofana Issouf, Hadjadj Yazid et Beroual Abderrahmane. (2016). Review of physicochemical-based diagnostic techniques for assessing insulation condition in aged transformers. Energies, 9, (5), p. 1-29.

N'cho Janvier Sylvestre, Fofana Issouf, Konan F. K. et Beroual Abderrahmane. (2020). Comparison of parameters in the formation of corrosive sulphide deposition on copper conductors. ARPN Journal of Engineering and Applied Sciences, 15, (3), p. 304-314.

Ndiaye Ibrahima, Farzaneh Masoud et Fofana Issouf. (2007). Study of the development of positive streamers along ice surface. IEEE Transactions on Dielectrics and Electrical Insulation, 14, (6), p. 1436-1445.

Nekahi Azam, Farzaneh Masoud, Volat Christophe et Chisholm William A.. (2008). Electron density and temperature measurement of arc on an ice surface. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 2008, (4772815), p. 658-661.

Ngueleu Armelle-Myriane, Barthod Corentin, Best Krista Lynn, Routhier François, Otis Martin J.-D. et Batcho Charles Sèbiyo. (2022). Criterion validity of ActiGraph monitoring devices for step counting and distance measurement in adults and older adults: a systematic review. Journal of NeuroEngineering and Rehabilitation, 19, (112),

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2021). Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys. Materials Science and Engineering: A, 820, p. 141538.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Optimization of mechanical properties and electrical conductivity in Al–Mg–Si 6201 alloys with different Mg/Si ratios. Journal of Materials Research, 35, (20), p. 2765-2776.

Noormohammed Saleema et Sarkar Dilip K.. (2021). Rf-sputtered Teflon®-modified superhydrophobic nanostructured titanium dioxide coating on aluminum alloy for icephobic applications. Coatings, 11, (4), p. 432.

Nuamah Rania Afia, Noormohammed Saleema et Sarkar Dilip K.. (2021). Pulsed reverse potential electrodeposition of carbon-free Ni/NiO nanocomposite thin film electrode for energy storage supercapacitor electrodes. Coatings, 11, (7), p. 780.

Nuamah Rania Afia, Noormohammed Saleema et Sarkar Dilip K.. (2021). Specific capacitance behavior of Co-Co3O4 nanocomposite thin films synthesized via different electrodeposition modes. International Journal of Energy Research, p. 1-11.

Okikiola Oparanti Samson, Mohan Rao Ungarala et Fofana Issouf. (2022). Natural esters for green transformers: challenges and keys for improved serviceability. Energies, 16, (1), e61.

Olivares-Galvan Juan Carlos, Escarela-Perez R., Georgilakis P. S., Fofana Issouf et Magdaleno-Adame Salvador. (2012). A bibliographic analysis of transformer literature 1990-2000. Electrical and Electronic Engineering, 2, (3), p. 96-121.

Olivares-Galvan Juan Carlos, Escarela-Perez Rafael, Georgilakis Pavlos S. et Fofana Issouf. (2013). Evaluation of distribution transformer banks in electric power systems. International Transactions on Electrical Energy Systems, 23, (3), p. 364-379.

Oparanti Samson Okikiola, Fofana Issouf, Jafari Reza et Zarrougui R.. (2024). A state-of-the-art review on green nanofluids for transformer insulation. Journal of Molecular Liquids, 396, e124023.

Oparanti Samson Okikiola, Fofana Issouf, Jafari Reza, Zarrougui Ramzi et Abdelmalik A. A.. (2024). Canola oil: A renewable and sustainable green dielectric liquid for transformer insulation. Industrial Crops and Products, 215, e118674.

Oparanti Samson Okikiola, Fofana Issouf, Zarrougui Ramzi, Jafari Reza et Yapi Kouba Marie Lucia. (2024). Improving some physicochemical characteristics of environmentally friendly insulating liquids for enhanced sustainability in subpolar transformer applications. Sustainable Materials and Technologies, 41, e00996.

Otis Martin J.-D.. (2013). Electromechanical characterization and locomotion control of IPMC BioMicroRobot. Advances in Materials Science and Engineering, 2013, p. 1-17.

Otis Martin J.-D., Adjelane Abid, Jomphe Éric et Youssef Khaled. (2017). Toilet assistive system designed for the reduction of accidental falls in the bathroom using admittance controller. Machines, 5, (4), p. 1-15.

Otis Martin J.-D., Ayena Cossoun Johannes, Tremblay Louis E., Fortin Pascal E. et Ménélas Bob-Antoine-Jerry. (2016). Use of an enactive insole for reducing the risk of falling on different types of soil using vibrotactile cueing for the elderly. PLoS ONE, 11, (9), e0162107.

Otis Martin J.-D., Perreault Simon, Nguyen-Dang Thien-Ly, Lambert Patrice, Gouttefarde Marc, Laurendeau Denis et Gosselin Clément. (2009). Determination and management of cable interferences between two 6-DOf foot platforms in a cable-driven locomotion interface. IEEE transactions on systems, man and cybernetics. Part A. Systems and humans, 39, (3), p. 528-544.

Otis Martin J.-D. et Vandewynckel Julien. (2021). A many-objective simultaneous feature selection and discretization for LCS-based gesture recognition. Applied Sciences, 11, (21), p. 9787.

Ouahmani Tarik El, Chehri Abdellah et Hakem Nadir. (2019). Bio-inspired routing protocol in VANET networks: A case study. Procedia Computer Science, 159, p. 2384-2393.

Ouari Kamel, Rekioua Toufik et Ouhrouche Mohand. (2014). Real time simulation of nonlinear generalized predictive control for wind energy conversion system with nonlinear observer. ISA Transactions, 53, (1), p. 76-84.

Ouellet R., Bui Rung-Tien et Perron Jean. (1990). Numerical simulation of a casting furnace. Simulation, 54, (2), p. 92-100.

Ouhrouche Mohand, Errouissi Rachid, Trzynadlowski Andrzej M., Tehrani Kambiz et Benzaioua Ammar. (2016). A Novel Predictive Direct Torque Controller for Induction Motor Drives. IEEE Transactions on Industrial Electronics, 63, (8), p. 5221-5230.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2014). 3D-modelling of conjugate heat and mass transfers: effects of storage conditions and species on wood high temperature treatment. International Journal of Heat and Mass Transfer, 79, p. 945-953.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2018). An advanced dynamic process model for industrial horizontal anode baking furnace. Applied Mathematical Modelling, 53, p. 384-399.

Oumarou Noura, Kocaefe Duygu et Kocaefe Yasar S.. (2016). Investigation of the refractory bricks used for the flue wall of the horizontal anode baking ring furnace. Ceramics International, 42, (16), p. 18436-18442.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S. et Morais Brigitte. (2016). Transient process model of open anode baking furnace. Applied Thermal Engineering, 107, p. 1253-1260.

Oumarou Noura, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. (2015). A dynamic process model for predicting the performance of horizontal anode baking furnaces. Light metals, p. 1081-1086.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. (2018). Modification of petroleum coke by different additives and the impact on anode properties. Canadian Journal of Chemical Engineering, 96, (8), p. 1707-1712.

Öztürk Sena, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. (2018). Modification of coke by different additives to improve anode properties. Fuel, 211, p. 102-109.

Palanque Valerian, Villeneuve Éric, Budinger M., Pommier-Budinger Valérie et Momen Gelareh. (2022). Cohesive strength and fracture toughness of atmospheric ice. Cold Regions Science and Technology, 204, e103679.

Palanque Valerian, Villeneuve Éric, Budinger M., Pommier-Budinger Valérie et Momen Gelareh. (2023). Experimental measurement and expression of atmospheric ice Young's modulus according to its density. Cold Regions Science and Technology, 212, e103890.

Palanque Valerian, Villeneuve Éric, Budinger M., Pommier-Budinger Valérie et Momen Gelareh. (2023). Experimental measurement and expression of atmospheric ice Young's modulus according to its density. Cold Regions Science and Technology, 212, e103890.

Pan Lei, Liu Kun, Breton Francis et Chen X-Grant. (2016). Effect of Fe on microstructure and properties of 8xxx aluminum conductor alloys. Journal of Materials Engineering and Performance, 25, (12), p. 5201-5208.

Pan Lei, Liu Kun, Breton Francis et Chen X-Grant. (2017). Effects of minor Cu and Mg additions on microstructure and material properties of 8xxx aluminum conductor alloys. Journal of Materials Research, 32, (6), p. 1094-1104.

Pan Lei, Mirza Foisal Ahmed, Liu Kun et Chen X-Grant. (2017). Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys. Materials Science and Technology, 33, (9), p. 1130-1137.

Perreautl Simon, Cardou Philippe, Gosselin Clément et Otis Martin J.-D.. (2010). Geometric determination of the interference-free constant-orientation workspace of parallel cable-driven mechanisms. Journal of Mechanisms and Robotics, 2, (3),

Perron Éric, Louchez P. R. et Laforte Jean-Louis. (1996). Introductory analysis of boundary-layer development on de/anti-icing fluid. Journal of Aircraft, 33, (1), p. 74.

Perron Jean. (2021). An alternative to dark matter? Part 1 : The early universe (tp to 10-9 s), energy creation the alphaton, baryogenesis. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 784-807.

Perron Jean. (2021). An Alternative to Dark Matter? Part 3: An Open Universe (3 Gy to 76 Gy) Galaxies and Structures Rotation. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 844-872.

Perron Jean. (2021). An alternative to the dark matter? Part 2: A close universe (10−9 s to 3 Gy), galaxies and structures formation. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 808-843.

Perron Jean. (2021). Schwarzschild quantum light geodesics metric : a pair of BH-Inner WH. Journal of High Energy Physics, Gravitation and Cosmology, 7, (3), p. 1089-1101.

Perron Jean et Bui Rung-Tien. (1994). Fours rotatifs : modèle dynamique du mouvement du lit. The Canadian Journal of Chemical Engineering, 72, (1), p. 16-26.

Perron Jean et Bui Rung-Tien. (1990). Rotary cylinders : solid transport prediction by dimensional and rheological analysis. The Canadian Journal of Chemical Engineering, 68, (1), p. 61-68.

Perron Jean et Bui Rung-Tien. (1992). Rotary cylinders : transverse bed motion prediction by rheological analysis. The Canadian Journal of Chemical Engineering, 70, (2), p. 223-231.

Perron Jean, Bui Rung-Tien et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : I. le modèle. The Canadian Journal of Chemical Engineering, 70, (6), p. 1108-1119.

Perron Jean, Bui Rung-Tien et Nguyen H. T.. (1992). Modélisation d'un four de calcination du coke de pétrole : II. Simulation du procédé. The Canadian Journal of Chemical Engineering, 70, (6), p. 1120-1131.

Péter Zsolt, Volat Christophe, Farzaneh Masoud et Kiss László. (2008). Numerical investigations of a new thermal de-icing method for overhead conductors based on high current impulses. IET Generation, Transmission & Distribution, 2, (5), p. 666-675.

Pompili Massimo, Calcara Luigi et Fofana Issouf. (2023). Editorial Special Section on Liquid Dielectrics. IEEE Transactions on Dielectrics and Electrical Insulation, 30, (4), p. 1391.

Poncsák Sándor, Kiss László, Guérard Sébastien et Bilodeau Jean-François. (2017). Impact of the solidification rate on the chemical composition of frozen cryolite bath. Metals, 7, (3), p. 97.

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2022). Effect of chemical composition on the semisolid tensile properties and hot tearing susceptibility of AA6111 DC cast alloys. Journal of Materials Science,

Qassem Mohamed, Javidani Mousa, Larouche Daniel, Colbert Josée et Chen X-Grant. (2023). Temperature dependence of elastic properties of Al-Mg-Si direct-Chill-cast AA6111 alloy at near-solidus temperatures. Journal of Materials Engineering and Performance,

Qian Cheng, Ménard Sylvain, Bard Delphine et Negreira Juan. (2019). Development of a vibroacoustic stochastic finite element prediction tool for a CLT floor. Applied Sciences, 9, (6), e1106.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effect of homogenization treatment and microalloying with Mn on the microstructure and hot workability of AA6060 aluminum alloys. Journal of Materials Engineering and Performance, 28, (8), p. 4531-4542.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effect of post-homogenisation cooling rate and Mn addition on Mg2Si precipitation and hot workability of AA6060 alloys. Canadian Metallurgical Quarterly, 59, (2), p. 189-200.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2019). Effects of Mn addition and related Mn-containing dispersoids on the hot deformation behavior of 6082 aluminum alloys. Materials Science and Engineering: A, 764, p. 138253.

Qian Xiaoming, Parson Nick et Chen X-Grant. (2020). Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing. Journal of Materials Science & Technology, 52, p. 189-197.

Qin Jian, Zhang Zhan et Chen X-Grant. (2019). Evolution of activation energy during hot deformation of Al–15% B4C composites containing Sc and Zr. AIMS Materials Science, 6, (4), p. 484-497.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Hot deformation and processing maps of Al-15%B4C composites containing Sc and Zr. Journal of Materials Engineering and Performance, 26, (4), p. 1673-1684.

Qin Jian, Zhang Zhan et Chen X-Grant. (2016). Mechanical properties and strengthening mechanisms of Al-15 Pct B4C composites with Sc and Zr at elevated temperatures. Metallurgical and Materials Transactions A, 47, (9), p. 4694-4708.

Qin Jian, Zhang Zhan et Chen X-Grant. (2017). Mechanical properties and thermal stability of hot-rolled Al–15%B4C composite sheets containing Sc and Zr at elevated temperature. Journal of composite materials, 51, (18), p. 2643-2653.

Rabbani Saad, Bakhshandeh Ehsan, Jafari Reza et Momen Gelareh. (2022). Superhydrophobic and icephobic polyurethane coatings: Fundamentals, progress, challenges and opportunities. Progress in Organic Coatings, 165, p. 106715.

Rabbani Saad, Jafari Reza et Momen Gelareh. (2022). Superhydrophobic micro-nanofibers from PHBV-SiO2 biopolymer composites produced by electrospinning. Functional Composite Materials, 3, (1),

Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2018). Influence of thermal aging parameters on the characteristics of aluminum semi-solid alloys. Metals, 8, (10), e746.

Ragab Khaled Ahmed, Bouazara Mohamed et Chen X-Grant. (2019). Quality index charts of Al-Si-Mg semi solid alloys subjected to multiple temperatures aging treatments and different quenching media. Materials, 12, (11), e1834.

Rakhmonov Jovid, Liu Kun et Chen X-Grant. (2020). Effects of compositional variation on the thermal stability of θ′-Al2Cu precipitates and elevated-temperature strengths in Al-Cu 206 alloys. Journal of Materials Engineering and Performance, 29, (11), p. 7221-7230.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content. Journal of Alloys and Compounds, 861, p. 157937.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2021). Enhanced elevated-temperature strength and creep resistance of dispersion-strengthened Al-Mg-Si-Mn AA6082 alloys through modified processing route. Materials, 14, (19), e5489.

Rakhmonov Jovid, Liu Kun, Rometsch Paul, Parson Nick et Chen X-Grant. (2020). Improving the mechanical response of Al–Mg–Si 6082 structural alloys during high-temperature exposure through dispersoid strengthening. Materials, 13, (22), p. 5295.

Rakhmonov Jovid, Qassem Mohamed, Larouche Daniel, Liu Kun, Javidani Mousa, Colbert Josée et Chen X-Grant. (2021). A new approach to determine tensile stress-strain evolution in semi-solid state at near-solidus temperature of aluminum alloys. Metals, 11, (3), p. 396.

Rakotonandrasana J.H., Beroual Abderrahmane et Fofana Issouf. (2008). Modelling of the negative discharge in long air gaps under impulse voltages. Journal of Physics D: Applied Physics, 41, (10), p. 105210.

Rakotondramanana L., Kiss László, Poncsák Sándor, Guérard Sébastien et Bilodeau Jean-François. (2020). Mass transport by waves on the bath metal interface in electrolysis cell. Light Metals, 2020, p. 510-516.

Rao K. Srinivas, Paramkusam A.V., Darimireddy Naresh K. et Chehri Abdellah. (2021). Block Matching Algorithms for the Estimation of Motion in Image Sequences: Analysis. Procedia Computer Science, 192, p. 2980-2989.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu et Coulombe Patrick. (2017). 2-DOF dynamic model of vibro-compactor used for the carbon anodes block production. CIRP Journal of Manufacturing Science and Technology, 18, p. 45-52.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu et Morais Brigitte. (2013). Development of an analytical dynamic model of a vibro‐compactor used in carbon anode production. Light Metals, p. 1111-1115.

Rebaïne Fatma, Bouazara Mohamed, Rahem Ahmed et St-Georges Lyne. (2018). Static and vibration analysis of an aluminium and steel bus frame. World Journal of Mechanics, 8, (4), p. 112-135.

Regnima Guy-Oscar, Bétié Amidou, Koffi Thomas, Bagui Olivier K., Fofana Issouf, Kouacou Abaka et Zoueu Jérémie. (2018). Monitoring power transformers oils deterioration using structured laser illumination planar imaging. Measurement, 113, p. 38-45.

Robichaud Alexandre, Boudreault Martin et Deslandes Dominic. (2012). Comparison between inductance topologies for resonant wireless power transmission applications. 2012 Asia Pacific Microwave Conference Proceedings, 2012, p. 397-399.

Robichaud Alexandre, Cicek Paul-Vahe, Deslandes Dominic et Nabki Frederic. (2018). Frequency tuning technique of piezoelectric ultrasonic transducers for ranging applications. Journal of Microelectromechanical Systems, 27, (3), p. 570-579.

Robichaud Alexandre, Deslandes Dominic, Cicek Paul-Vahe et Nabki Frederic. (2020). Electromechanical tuning of piecewise stiffness and damping for long-range and high-precision piezoelectric ultrasonic transducers. Journal of Microelectromechanical Systems, 29, (5), p. 1189-1198.

Robichaud Alexandre, Deslandes Dominic, Cicek Paul-Vahe et Nabki Frederic. (2018). A novel topology for process variation-tolerant piezoelectric micromachined ultrasonic transducers. Journal of Microelectromechanical Systems, 27, (6), p. 1204-1212.

Robichaud Alexandre, Deslandes Dominic, Cicek Paul-Vahé et Nabki Frederic. (2021). A system in package based on a piezoelectric micromachined ultrasonic transducer matrix for ranging applications. Sensors, 21, (8), p. 2590.

Ronneberg Sigrid, Laforte Caroline, Volat Christophe, He Jianying et Zhang Zhiliang. (2019). The effect of ice type on ice adhesion. AIP Advances, 9, (5), 055304.

Ronneberg Sigrid, Zhuo Yizhi, Laforte Caroline, He Jianying et Zhang Zhiliang. (2019). Interlaboratory study of ice adhesion using different techniques. Coatings, 9, (10), p. 678.

Roshan Shamim, Sarabi Ali Asghar, Jafari Reza et Momen Gelareh. (2022). One-step fabrication of superhydrophobic nanocomposite with superior anticorrosion performance. Progress in Organic Coatings, 169, e106918.

Sabau John, Fofana Issouf, Bouaïcha Amine, Hadjadj Yazid et Farzaneh Masoud. (2010). An environmentally friendly dissolved oxygen and moisture removal system for freely breathing transformers. IEEE Electrical Insulation Magazine, 26, (3), p. 35-43.

Saber Mohammed, El Rharras Abdessamad, Saadane Rachid, Chehri Abdellah, Hakem Nadir et Kharraz Hatim. (2020). Spectrum sensing for smart embedded devices in cognitive networks using machine learning algorithms. Procedia Computer Science, 176, p. 2404-2413.

Saeidi Ali, Deck Olivier, Al Heib Marwan et Verdel Thierry. (2015). Development of a damage simulator for the probabilistic assessment of building vulnerability in subsidence areas. International Journal of Rock Mechanics and Mining Sciences, 73, p. 42-53.

Saeidi Ali, Deck Olivier, Al Heib Marwan, Verdel Thierry et Rouleau Alain. (2013). Adjusting the influence function method for subsidence prediction. Key Engineering Materials, 553, p. 59-66.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2013). Comparison of building damage assessment methods for risk analysis in mining subsidence regions. Geotechnical and Geological Engineering, 31, (4), p. 1073-1088.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2012). Development of building vulnerability functions in subsidence regions from analytical methods. Geotechnique, 62, (2), p. 107-120.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2009). Development of building vulnerability functions in subsidence regions from empirical methods. Engineering Structures, 31, (10), p. 2275-2286.

Saeidi Ali, Deck Olivier et Verdel Thierry. (2015). An extension of analytical methods for building damage evaluation in subsidence regions to anisotropic beams. European Journal of Environmental and Civil Engineering, 19, (6), p. 756-772.

Saeidi Ali, Maazallahi V. et Rouleau Alain. (2016). Assessment of slide surface and pre-slide topography using site investigation data in back analysis. International Journal of Rock Mechanics and Mining Sciences, 88, p. 29-33.

Safaee Alireza, Sarkar Dilip K. et Farzaneh Masoud. (2008). Superhydrophobic properties of silver-coated films on copper surface by galvanic exchange reaction. Applied Surface Science, 254, (8), p. 2493-2498.

Safiddine L., Hadj-Ziane Zafour Amel, Fofana Issouf, Skender Abdelhak, Guerbas Fettouma et Boucherit Ahmed. (2017). Transformer oil reclamation by combining several strategies enhanced by the use of four adsorbents. IET Generation, Transmission & Distribution, 11, (11), p. 2912-2920.

Safiddine Leila, Zafour Amel Hadj-Ziane, Ungarala Mohan Rao et Fofana Issouf. (2019). Regeneration of transformer insulating fluids using membrane separation technology. Energies, 12, (3), p. 368-381.

Saha Sudeshna, Kocaefe Duygu, Boluk Yaman et Pichette André. (2011). Enhancing exterior durability of jack pine by photo-stabilization of acrylic polyurethane coating using bark extract. Part 1: Effect of UV on color change and ATR–FT-IR analysis. Progress in Organic Coatings, 70, (4), p. 376-382.

Saha Sudeshna, Kocaefe Duygu, Boluk Yaman et Pichette André. (2013). Surface degradation of CeO2 stabilized acrylic polyurethane coated thermally treated jack pine during accelerated weathering. Applied Surface Science, 276, p. 86-94.

Saha Sudeshna, Kocaefe Duygu, Krause Cornelia et Larouche Tommy. (2011). Effect of titania and zinc oxide particles on acrylic polyurethane coating performance. Progress in Organic Coatings, 70, (4), p. 170-177.

Saha Sudeshna, Kocaefe Duygu, Sarkar Dilip K., Boluk Yaman et Pichette André. (2011). Effect of TiO2-containing nano-coatings on the color protection of heat-treated jack pine. Journal of Coatings Technology and Research, 8, (2), p. 183-190.

Saleema Noormohammed, Farzaneh Masoud, Paynter Royston W. et Sarkar Dilip K.. (2011). Prevention of ice accretion on aluminum surfaces by enhancing their hydrophobic properties. Journal of Adhesion Science and Technology, 25, p. 27-40.

Saleema Noormohammed, Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2012). Polymer masks fabrication by micropatterning surfaces of composite polymer coatings. Journal of Adhesion Science and Technology, 26, (22), p. 2531-2541.

Saleema Noormohammed, Sarkar Dilip K., Gallant Danick, Paynter Royston W. et Chen X-Grant. (2011). Chemical Nature of Superhydrophobic Aluminium Alloy Surfaces Produced via a One-Step Process Using Fluoroalkyl-Silane in a Base Medium. ACS Applied Materials & Interfaces, 3, (12), p. 4775-4781.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W. et Chen X-Grant. (2010). Superhydrophobic aluminum alloy surfaces by a novel one-step process. ACS Applied Materials & Interfaces, 2, (9), p. 2500-2502.

Saleema Noormohammed, Sarkar Dilip K., Paynter Royston W., Gallant Danick et Eskandarian Masoomeh. (2012). A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications. Applied Surface Science, 261, p. 742-748.

Saliha Boudraa, Fadila Benabed, Issouf Fofana et Leila Mokhnache. (2022). FTIR and FDS assessment of mineral oil under low electrical discharge. Diagnostyka, 23, (2), p. 1-7.

Salsabili Mohammad, Saeidi Ali, Rouleau Alain et Nastev Miroslav. (2021). Seismic microzonation of a region with complex surficial geology based on different site classification approaches. Geoenvironmental Disasters, 8, e27.

Samad Abdallah, Morency François et Volat Christophe. (2018). A numerical model of the blade element momentum theory for rotating airfoils with heat transfer calculation. 2018 Joint Thermophysics and Heat Transfer Conference, 2018,

Samad Abdallah, Tagawa Gitsuzo B., Morency François et Volat Christophe. (2020). Predicting rotor heat transfer using the viscous blade element momentum theory and unsteady vortex lattice method. Aerospace, 7, (7), p. 90.

Samad Abdallah, Villeneuve Éric, Blackburn Caroline, Morency François et Volat Christophe. (2021). An experimental investigation of the convective heat transfer on a small helicopter rotor with anti-icing and de-icing test setups. Aerospace, 8, (4), e96.

Samad Abdallah, Villeneuve Éric, Morency François et Volat Christophe. (2021). A numerical and experimental investigation of the convective heat transfer on a small helicopter rotor test setup. Aerospace, 8, (2), p. 53.

Sanjeeva Reddy B. R., Darimireddy Naresh K., Park Chan-Wang et Chehri Abdellah. (2021). Performance of reconfigurable antenna fabricated on flexible and non-flexible materials for band switching applications. Energies, 14, (9), p. 2553.

Sanogo Bazoumana, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Côté Jules. (2021). Determination of optimum vibro-compaction time using sound analysis. Journal of Manufacturing Processes, 68, (Part B), p. 118-125.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar et Coulombe Patrick. (2017). Prediction of contact angle of coke-pitch system from raw material properties using artificial neural network. International Journal of Engineering Inventions, 6, (4), p. 42-52.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Coulombe Patrick. (2016). Effect of coke granulometry on the properties of carbon anodes based on experimental study and ANN analysis. Journal of Materials Science Research, 5, (4), p. 63-78.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Lagacé Charles-Luc. (2014). Determination of contact angle from raw material properties using linear multivariable analysis. Light Metals, p. 1099-1104.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Sarkar Dilip K. et Morais Brigitte. (2016). Effect of crystallinity on the wettability of petroleum coke by coal tar pitch. Energy & Fuels, 30, (4), p. 3549-3558.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Sarkar Dilip K., Bhattacharyay Dipankar, Morais Brigitte et Chabot Jérôme. (2014). Coke–pitch interactions during anode preparation. Fuel, 117, (part A), p. 598-607.

Sarkar Dilip K. et Farzaneh Masoud. (2008). Fabrication of PECVD-grown fluorinated hydrocarbon nanoparticles and circular nanoring arrays using nanosphere lithography. Applied Surface Science, 254, (13), p. 3758-3761.

Sarkar Dilip K. et Farzaneh Masoud. (2009). Superhydrophobic coatings with reduced ice adhesion. Journal of Adhesion Science and Technology, 23, p. 1215-1237.

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2008). Superhydrophobic properties of ultrathin rf-sputtered Teflon films coated etched aluminum surfaces. Materials Letters, 62, (8-9), p. 1226-1229.

Sarkar Dilip K., Farzaneh Masoud et Paynter Royston W.. (2010). Wetting and superhydrophobic properties of PECVD grown hydrocarbon and fluorinated-hydrocarbon coatings. Applied Surface Science, 256, (11), p. 3698-3701.

Sarkar Dilip K. et Noormohammed Saleema. (2021). Special issue “Anti-icing coatings and surfaces”. Coatings, 11, (8), p. 955.

Sarkar Dilip K. et Paynter Royston W.. (2010). One-Step Deposition Process to Obtain Nanostructured Superhydrophobic Thin Films by Galvanic Exchange Reactions. Journal of Adhesion Science and Technology, 24, (6), p. 1181-1189.

Sarkar Dilip K. et Saleema Noormohammed. (2010). One-step fabrication process of superhydrophobic green coatings. Surface and Coatings Technology, 204, (15), p. 2483-2486.

Sassi Mohamed Amir, Otis Martin J.-D. et Campeau-Lecours Alexandre. (2017). Active stability observer using artificial neural network for intuitive physical human–robot interaction. International Journal of Advanced Robotic Systems, p. 1-16.

Sayadi Ahmed, Mahi Djillali, Fofana Issouf, Bessissa Lakhdar, Bessedik Sid Ahmed, Arroyo-Fernandez Oscar Henry et Jalbert Jocelyn. (2023). Modeling and Predicting the Mechanical Behavior of Standard Insulating Kraft Paper Used in Power Transformers under Thermal Aging. Energies, 16, (18), e6455.

Sekkat Hiba, Tigani Smail, Saadane Rachid et Chehri Abdellah. (2021). Vision-Based Robotic Arm Control Algorithm Using Deep Reinforcement Learning for Autonomous Objects Grasping. Applied Sciences, 11, (17), p. 7917.

Sékongo Beki, Brettschneider Stephan, Rao U. Mohan, Fofana Issouf, Jabbari Marouane, Picher Patrick et Yeo Zie. (2022). Pre-Breakdown and Breakdown Behavior of Synthetic and Natural Ester Liquids under AC Stress. Energies, 15, (1), p. 167.

Sékongo Beki, Ungarala Mohan Rao, Fofana Issouf, Jabbari Marouane, Akre Simplice et Yeo Zie. (2020). Temperature dependence of the pre-breakdown and breakdown phenomena in natural esters under AC stress. IET Science, Measurement & Technology, 14, (9), p. 762-769.

Senoussaoui Mohammed El Amine, Brahami Mostefa et Fofana Issouf. (2021). Transformer oil quality assessment using random forest with feature engineering. Energies, 14, (7), p. 1809.

Seytashmehr Alireza, Fofana Issouf, Eichler Christian, Akbari Ali Akbar, Borsi Hossein et Gockenbach Ernst. (2008). Dielectric spectroscopic measurements on transformer oil-paper insulation under controlled laboratory conditions. IEEE Transactions on Dielectrics and Electrical Insulation, 15, (4), p. 1100-1111.

Shahbazi Alireza, Chesnaux Romain et Saeidi Ali. (2021). A new combined analytical-numerical method for evaluating the inflow rate into a tunnel excavated in a fractured rock mass. Engineering Geology, 283, e106003.

Shahbazi Alireza, Saeidi Ali, Chesnaux Romain et Rouleau Alain. (2021). The Specific Length of an Underground Tunnel and the Effects of Rock Block Characteristics on the Inflow Rate. Geosciences, 11, (12), p. 517.

Shakiba Mohammad, Parson Nick et Chen X-Grant. (2016). Modeling the Effects of Cu content and deformation variables on the high-temperature flow behavior of dilute Al-Fe-Si alloys using an artificial neural network. Materials, 9, (7), p. 536.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2021). Icephobic properties of aqueous self-lubricating coatings containing PEG-PDMS copolymers. Progress in Organic Coatings, 161, e106466.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2022). An intelligent icephobic coating based on encapsulated phase change materials (PCM). Colloids and Surfaces A: Physicochemical and Engineering Aspects, 655, e130157.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2023). A novel hybrid anti-icing surface combining an aqueous self-lubricating coating and phase-change materials. Progress in Organic Coatings, 177, e107414.

Shamshiri Mohammadreza, Jafari Reza et Momen Gelareh. (2021). Potential use of smart coatings for icephobic applications: A review. Surface and Coatings Technology, 424, e127656.

Shamshiri Mohammadreza, Momen Gelareh et Jafari Reza. (2024). Icephobic coatings beyond boundaries: Layered integration of phase change materials beneath a PEG-PDMS copolymer–containing coating to enhance anti-icing performance. Progress in Organic Coatings, 189, e108324.

Shaopeng Li, Snaiki Reda et Teng Wu. (2021). A knowledge‐enhanced deep reinforcement learning‐based shape optimizer for aerodynamic mitigation of wind‐sensitive structures. Computer-Aided Civil and Infrastructure Engineering, p. 1-14.

Sharma Teena, Chehri Abdellah, Fofana Issouf, Jadhav Shubham, Khare Siddhartha, Debaque Benoit, Duclos-Hindie Nicolas et Arya Deeksha. (2024). Deep Learning-Based Object Detection and Classification for Autonomous Vehicles in Different Weather Scenarios of Quebec, Canada. IEEE Access, 12, p. 13648-13662.

Sharma Teena, Chehri Abdellah et Fortier Paul. (2021). Review of optical and wireless backhaul networks and emerging trends of next generation 5G and 6G technologies. Transactions on Emerging Telecommunications Technologies, 32, (3), e4155.

Sharma Teena, Chehri Abdellah, Fortier Paul, Ahmed Hassan Yousif, Zeghid Medien et Imtiaz Waqas A.. (2021). Optical code construction of 2D spectral/spatial BIBD codes for SAC-OCDMA systems. Applied Sciences, 11, (2), p. 783.

Shi Cangji et Chen X-Grant. (2016). Evolution of activation energies for hot deformation of 7150 aluminum alloys with various Zr and V additions. Materials Science and Engineering: A, 650, p. 197-209.

Shi Cangji, Lai Jing et Chen X-Grant. (2014). Microstructural evolution and dynamic softening mechanisms of Al-Zn-Mg-Cu alloy during hot compressive deformation. Materials, 7, (1), p. 244-264.

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). Electrochemical synthesis of highly ordered polypyrrole on copper modified aluminium substrates. Applied Surface Science, 307, p. 589-592.

Siddaramanna Ashoka, Saleema Noormohammed et Sarkar Dilip K.. (2014). A versatile cost-effective and one step process to engineer ZnO superhydrophobic surfaces on Al substrate. Applied surface science, 311, p. 182-188.

Slalmi Ahmed, Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Jeon Gwanggil. (2021). Toward 6G: understanding network requirements and key performance indicators. Transactions on Emerging Telecommunications Technologies, 32, (3), e4201.

Slalmi Ahmed, Chaibi Hasna, Chehri Abdellah, Saadane Rachid, Jeon Gwanggil et Hakem Nadir. (2020). On the Ultra-Reliable and Low-Latency Communications for Tactile Internet in 5G Era. Procedia Computer Science, 176, p. 3853-3862.

Slalmi Ahmed, Chaibi Hasna, Saadane Rachid et Chehri Abdellah. (2021). Call Admission Control Optimization in 5G in Downlink Single-Cell MISO System. Procedia Computer Science, 192, p. 2502-2511.

Slalmi Ahmed, Chaibi Hasna, Saadane Rachid, Chehri Abdellah et Jeon Gwanggil. (2020). 5G NB‐IoT: Efficient network call admission control in cellular networks. Concurrency and Computation : Practice and Experience, e6047.

Slalmi Ahmed, Chaibi Hasna, Saadane Rachid, Chehri Abdellah, Jeon Gwanggil et Kharraz Aroussi Hatim. (2021). Energy-efficient and self-organizing Internet of Things networks for soil monitoring in smart farming. Computers & Electrical Engineering, 92, e107142.

Slalmi Ahmed, Chaibi Hasna, Saadane Rachid, Chehri Abdellah, Jeon Gwanggil et Kharraz Hatim. (2021). Energy-efficient and self-organizing Internet of Things networks for soil monitoring in smart farming. Computers & Electrical Engineering, 92, e107142.

Snaiki Reda, Jamali Abdeslan, Rahem Ahmed, Shabani Mehdi et Barjenbruch Brian L.. (2024). A metaheuristic-optimization-based neural network for icing prediction on transmission lines. Cold Regions Science and Technology, 224, e104249.

Snaiki Reda et Wu Teng. (2020). An analytical model for rapid estimation of hurricane supergradient winds. Journal of Wind Engineering and Industrial Aerodynamics, 201, p. 104175.

Sobhani Sarah, Bakhshandeh Ehsan, Jafari Reza et Momen Gelareh. (2023). Mechanical properties, icephobicity, and durability assessment of HT-PDMS nanocomposites: Effectiveness of sol–gel silica precipitation content. Journal of Sol-Gel Science and Technology, 105, (2), p. 1-12.

Sobhani Sarah, Munger Frédérick et Momen Gelareh. (2023). Reinforced PDMS elastomer nanocomposites: effectiveness of in-situ nano-silica content on flashover voltage and treeing phenomena. IEEE Transactions on Dielectrics and Electrical Insulation, 30, (5), p. 2158-2164.

Suassuna de Andrade Ferreira Regelii, Picher Patrick, Ezzaidi Hassan et Fofana Issouf. (2021). A machine-learning approach to identify the influence of temperature on FRA measurements. Energies, 14, (18), e5718.

Suassuna de Andrade Ferreira Regelii, Picher Patrick, Meghnefi Fethi, Fofana Issouf, Ezzaidi Hassan, Volat Christophe et Behjat Vahid. (2023). Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization. Energies, 16, (11), e4364.

Sun Hang, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S., Côté Jules et Coulombe Patrick. (2019). Colorimetric methods for determining Fe, V, and Ni contents in coke and anodes. Chemical Engineering Technology, 42, (5), p. 1011-1017.

Tagzirt S., Bouguedad D., Mekhaldi A. et Fofana Issouf. (2022). Multiscale Analysis of Naturally Weathered High-Voltage XLPE Cable Insulation in Two Extreme Environments. IEEE Transactions on Dielectrics and Electrical Insulation, 29, (4), p. 1599-1607.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2014). Electrical performance evaluation of EHV post insulators covered with ice under different air gap configurations. IEEE Transactions on Dielectrics and Electrical Insulation, 21, (6), p. 2619-2627.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2016). Empirical flashover model of EHV post insulators based on ISP parameter in cold environments. IEEE Transactions on Dielectrics and Electrical Insulation, 23, (1), p. 403-409.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2013). Equivalent surface conductivity of ice accumulated on insulators during development of AC and DC flashovers arcs. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (5), p. 1789-1798.

Taheri Ledari Shamsodin, Farzaneh Masoud et Fofana Issouf. (2014). Improved dynamic model of DC arc discharge on ice-covered post insulator surfaces. IEEE Transactions on Dielectrics and Electrical Insulation, 21, (2), p. 729-739.

Taheri Ledari Shamsodin, Gholami Ahmad, Fofana Issouf et Taheri Hamed. (2012). Modeling and simulation of transformer loading capability and hot spot temperature under harmonic conditions. Electric Power Systems Research, 86, p. 68-75.

Talhi M., Fofana Issouf et Flazi S.. (2013). Comparative study of the electrostatic charging tendency between synthetic ester and mineral oil. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (5), p. 1598-1606.

Talhi M., Fofana Issouf et Flazi S.. (2020). Impact of free radicals on the electrostatic charging tendency of transformer oils. Electrical Engineering, 102, p. 1265-1274.

Talhi M., Fofana Issouf et Flazi S.. (2016). Impact of various stresses on the streaming electrification of transformer oil. Journal of Electrostatics, 79, p. 25-32.

Tatoulian Michael, Gallino Enrico, Jafari Reza, Arefi-Khonsari Farzaneh, Tatoulian L., Borra Jean Pascal, Lewis François et Mantovani Diego. (2007). Plasma and Electrospray Deposition to Improve the Biocompatibility of Stents. Materials science forum, 539-543, p. 529-534.

Tavakoli Zaniani Changiz, Farzaneh Masoud, Fofana Issouf et Beroual Abderrahmane. (2006). Dynamics and modeling of AC arc on surface of ice. IEEE Transactions on Dielectrics and Electrical Insulation, 13, (6), p. 1278-1285.

Tchakoua Takoutsing Pierre, Wamkeue René, Ouhrouche Mohand, Benini Ernesto et Ekemb Gabriel. (2016). Electric Circuit Model for the Aerodynamic Performance Analysis of a Three-Blade Darrieus-Type Vertical Axis Wind Turbine: The Tchakoua Model. Energies, 9, (10), e820.

Tchakoua Takoutsing Pierre, Wamkeue René, Ouhrouche Mohand, Slaoui-Hasnaoui Fouad, Tameghe Tommy et Ekemb Gabriel. (2014). Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges. Energies, 7, (4), p. 2595-2630.

Tchane Djogdom Gilde Vanel, Meziane Ramy et Otis Martin J.-D.. (2024). Robust dynamic robot scheduling for collaborating with humans in manufacturing operations. Robotics and Computer-Integrated Manufacturing, 88, e102734.

Tchane Djogdom Gilde Vanel, Otis Martin J.-D. et Meziane Ramy. (2023). Dynamic time warping–based feature selection method for foot gesture cobot operation mode selection. The International Journal of Advanced Manufacturing Technology, 126, (9-10), p. 4521-4541.

Thomas Roger, Fraser Kirk A., Kiss László, Poncsák Sándor, Guérard Sébastien, Bilodeau Jean-François et Bonneau G.. (2020). Development of a mathematical model to simulate raft formation. Light Metals, 2020, p. 688-695.

Thongam Jogendra Singh, Beguenane Rachid, Tarbouchi Mohammed, Okou Aime Francis, Merabet Adel, Fofana Issouf et Bouchard Pierre. (2013). A rotor speed estimation algorithm in variable speed permanent magnet synchronous generator wind energy conversion system. International Journal of Robust and Nonlinear Control, 23, (16), p. 1880-1890.

Tirupati Naidu Gottapu, Ungarala Mohan Rao et Suresh Sudabattula. (2022). Influence of Ester Liquids on Dielectric Strength of Cellulose Kraft Paper. Energies, 15, (3), p. 762.

Tông T.V.K, Louchez P. R. et Zouzou A.. (1997). Introductory analysis of draining and freezing of de-icing fluids. Cold Regions Science and Technology, 25, (3), p. 207-214.

Tremblay Simon-Olivier, Marceau Daniel, Coulombe Patrick, Côté Julie et Kocaefe Duygu. (2018). Numerical investigation of the thermomechanical behaviour of anode butt. Light Metals, 2018, p. 1403-1412.

Tremblay Simon-Olivier, Marceau Daniel, Kocaefe Duygu et Lagacé Charles-Luc. (2015). Development of a new approach to increase the electrical performance of anodic assemblies. Light Metals, p. 1175-1180.

Ungarala Mohan Rao, Fofana Issouf, Beroual Abderrahmane, Rozga P., Pompili M., Calcara L. et Rapp Kevin J.. (2020). A review on pre-breakdown phenomena in ester fluids: Prepared by the international study group of IEEE DEIS liquid dielectrics technical committee. IEEE Transactions on Dielectrics and Electrical Insulation, 27, (5), p. 1546-1560.

Ungarala Mohan Rao, Fofana Issouf, Bétié Amidou, Senoussaoui M.L., Brahami Mostefa et Briosso Eduardo. (2019). Condition monitoring of in-service oil-filled transformers: Case studies and experience. IEEE Electrical Insulation Magazine, 35, (6), p. 33-42.

Ungarala Mohan Rao, Fofana Issouf, Jaya T., Rodriguez-Celis Esperanza, Jalbert Jocelyn et Picher Patrick. (2019). Alternative dielectric fluids for transformer insulation system: progress, challenges, and future prospects. IEEE Access, 7, p. 184552-184571.

Ungarala Mohan Rao, Fofana Issouf et N'cho Janvier Sylvestre. (2020). On some imperative IEEE Standards for usage of natural ester liquids in transformers. IEEE Access, 8, p. 145446-145456.

Ungarala Mohan Rao, Fofana Issouf et Picher Patrick. (2022). Decay Particles and Regeneration of Ester Dielectric Liquids A Challenge! Transformer Technology Mag, (17),

Ungarala Mohan Rao, Fofana Issouf, Rajesh K. N. V. P. S. et Picher Patrick. (2021). Identification and application of machine learning algorithms for transformer dissolved gas analysis. IEEE Transactions on Dielectrics and Electrical Insulation, 28, (5), p. 1828-1835.

Ungarala Mohan Rao, Fofana Issouf, Rozga Pawel, Picher Patrick, Sarkar Dilip K. et Karthikeyan R.. (2022). Influence of gelling in natural esters under open beaker accelerated thermal aging. IEEE Transactions on Dielectrics and Electrical Insulation, e3217995.

Ungarala Mohan Rao, Verma Anant K., Darimireddy Naresh K., Fofana Issouf, Park Chan-Wang et Vedik B.. (2021). Perspectives of convertors and communication aspects in automated vehicles, Part 1: Convertors and condition monitoring. Energies, 14, (7), p. 1795.

Vaidis Maxime et Otis Martin J.-D.. (2021). Swarm Robotic interactions in an open and cluttered environment: a survey. Designs, 5, (2), p. 37.

Vaidis Maxime et Otis Martin J.-D.. (2021). Swarm robotic interactions in an open and cluttered environment: a survey. Designs, 5, (2), p. 37.

Vandewynckel Julien, Otis Martin J.-D., Bouchard Bruno, Ménélas Bob-Antoine-Jerry et Bouzouane Abdenour. (2013). Towards a real-time error detection within a smart home by using activity recognition with a shoe-mounted accelerometer. Procedia Computer Science, 19, p. 516-523.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Application of superhydrophobic coatings as a corrosion barrier : a review. Surface and Coatings Technology, 341, p. 40-56.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2019). Evaluation of atmospheric-pressure plasma parameters to achieve superhydrophobic and self-cleaning HTV silicone rubber surfaces via a single-step, eco-friendly approach. Surface and Coatings Technology, 375, p. 100-111.

Vazirinasab Elham, Maghsoudi Khosrow, Momen Gelareh et Jafari Reza. (2022). On the icephobicity of damage-tolerant superhydrophobic bulk nanocomposites. Soft Matter, 18, (2), p. 412-424.

Vazirinasab Elham, Momen Gelareh et Jafari Reza. (2021). A non-fluorinated mechanochemically robust volumetric superhydrophobic nanocomposite. Journal of Materials Science & Technology, 66, p. 213-225.

Villeneuve Éric, Blackburn Caroline et Volat Christophe. (2021). Design and development of an experimental setup of electrically powered spinning rotor blades in icing wind tunnel and preliminary testing with surface coatings as hybrid protection solution. Aerospace, 8, (4), p. 98-117.

Villeneuve Éric, Brassard Jean-Denis et Momen Gelareh. (2024). Automated snow intensity measurement (ASIM). Results in Engineering, 21, e101812.

Villeneuve Éric, Brassard Jean-Denis et Volat Christophe. (2019). Effect of various surface coatings on de-icing/anti-icing fluids aerodynamic and endurance time performances. Aerospace, 6, (10), e114.

Villeneuve Eric, Charpentier Claire, Brassard Jean-Denis, Momen Gelareh et Lacroix Antoine. (2022). Aircraft Anti-Icing Fluids Endurance Under Natural and Artificial Snow: a Comparative Study. International Review of Aerospace Engineering (IREASE), 15, (1), p. 1-11.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 1/3 : development of a flat plate numerical model with experimental validation. Aerospace, 7, (5), p. 62-88.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 2/3 : investigation of transient vibration during frequency sweeps and pptimal piezoelectric actuator excitation. Aerospace, 7, (5), p. 49-69.

Villeneuve Éric, Volat Christophe et Ghinet Sebastian. (2020). Numerical and experimental investigation of the design of a piezoelectric de-icing system for small rotorcraft part 3/3 : numerical model and experimental validation of vibration-based de-icing of a flat plate structure. Aerospace, 7, (5), p. 54.

Vinogradova Natalia V., Popova Tatyana N., Chehri Abdellah et Burenina Valentina I.. (2020). SMART technologies as the innovative way of development and the answer to challenges of modern time. ITM Web of Conferences, 35, 06010.

Volat Christophe. (2013). Comparison between the use of surface and volume conductivity to compute potential distribution along an insulator in presence of a thin conductive layer. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642131), p. 409-413.

Volat Christophe, Duvillaret Lionel et Gaborit Gwenaël. (2012). Detection of AC corona discharges using an electro-optic E-field sensor. 2012 IEEE International Symposium on Electrical Insulation, 2012, (12907621), p. 95-98.

Volat Christophe, Duvillaret Lionel, Lecoche Frédéric, Dahdah Jean et Gaborit Gwenaël. (2013). Contactless optical sensors for in situ AC and DC electric field measurement and diagnostics. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642124), p. 365-369.

Volat Christophe, Emran Sayyed Mahdi Ale et Farzaneh Masoud. (2012). Numerical simulations of ice-covered EHV post station insulator performance equipped with booster sheds. 2012 IEEE International Symposium on Electrical Insulation, 2012, (12907620), p. 91-94.

Volat Christophe, Ezzaidi Hassan et Fofana Issouf. (2013). Comparison between 2D and 3D modeling of an EHV post station insulator equipped with a grading ring. 2013 IEEE Electrical Insulation Conference (EIC), 2013, (13642092), p. 114-118.

Volat Christophe, Farzaneh F. et Akkal Hatim. (2009). Influence of a grading ring on AC flashover voltage of an EHV post insulator covered with ice. 2009 IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2009, (11059859), p. 250-253.

Volat Christophe et Farzaneh Masoud. (2003). Method of sizing the sheds of post insulators in view of improving their electrical performance under cold atmospheric conditions = Méthode de dimensionnement des jupes des isolateurs de poste en vue d'améliorer leur performance électrique sous des conditions atmosphériques froides. CCECE 2003 - Canadian Conference on Electrical and Computer Engineering. Toward a Caring and Humane Technology, 2003, p. 647-650.

Volat Christophe et Farzaneh Masoud. (2006). Potential and electric-field distributions around an ice-covered post-type insulator. Canadian Journal of Electrical and Computer Engineering, 31, (4), p. 221-229.

Volat Christophe et Farzaneh Masoud. (2008). A simple axisymmetric model for calculation of potential distribution along ice-covered post station insulators during a melting period. 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2008, (10459406), p. 232-235.

Volat Christophe et Farzaneh Masoud. (2005). Three-dimensional modeling of potential and electric-field distributions along an EHV ceramic post insulator covered with ice — part I : simulations of a melting period. IEEE Transactions on Power Delivery, 20, (3), p. 2006-2013.

Volat Christophe et Farzaneh Masoud. (2005). Three-dimensional modeling of potential and electric-field distributions along an EHV ceramic post insulator covered with ice — part II : effect of air gaps and partial arcs. IEEE Transactions on Power Delivery, 20, (3), p. 2014-2021.

Volat Christophe, Farzaneh Masoud et Mhaguen Nisrine. (2009). Calculation of critical flashover voltage of ice-covered insulators using the finite element method. 2009 IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2009, (11059860), p. 450-453.

Volat Christophe, Farzaneh Masoud et Mhaguen Nisrine. (2011). Improved FEM models of one- and two-arcs to predict AC critical flashover voltage of ice-covered insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 18, (2), p. 393-400.

Volat Christophe, Jabbari Marouane, Farzaneh Masoud et Duvillaret Lionel. (2013). New method for in live-line detection of small defects in composite insulator based on electro-optic E-field sensor. IEEE Transactions on Dielectrics and Electrical Insulation, 20, (1), p. 194-201.

Volat Christophe, Meghnefi Fethi et Farzaneh Masoud. (2006). Analysis of leakage current of an ice-covered insulator during ice accretion. 2005/2006 IEEE/PES Transmission and Distribution Conference and Exhibition, 2006, p. 121-126.

Volat Christophe, Meghnefi Fethi, Farzaneh Masoud et Ezzaidi Hassan. (2010). Monitoring leakage current of ice-covered station post insulators using artificial neural networks. IEEE Transactions on Dielectrics and Electrical Insulation, 17, (2), p. 443-450.

Walter Julien, Chesnaux Romain, Cloutier Vincent et Gaboury Damien. (2017). The influence of water/rock − water/clay interactions and mixing in the salinization processes of groundwater. Journal of Hydrology. Regional Studies, 13, p. 168-188.

Williams B. W., Worswick M. J., D'Amours Guillaume, Rahem Ahmed et Mayer Robert. (2010). Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes. International Journal of Impact Engineering, 37, (10), p. 1008-1020.

Wisse Marie-Hélène, Saeidi Ali et Quirion Marco. (2023). Comparison of Existing Joint Orientation Parameters and Their Effect on Rock Erodibility in Dam Spillways. Quarterly Journal of Engineering Geology and Hydrogeology,

Wu Wei, Anisetti Marco, Chehri Abdellah et Jeon Gwanggil. (2015). Image enlargement using multiple sensors. Journal of Sensors, 2016, e1498796.

Xie Yadian, Kocaefe Duygu, Chen Chunying et Kocaefe Yasar S.. (2016). Review of research on template methods in preparation of nanomaterials. Journal of Nanomaterials, p. 1-10.

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S., Cheng Johnathan et Liu Wei. (2016). The effect of novel synthetic methods and parameters control on morphology of nano-alumina particles. Nanoscale Research Letters, 11, (259),

Xie Yadian, Kocaefe Duygu, Kocaefe Yasar S. et Wei Liu. (2013). Correlation between anode recipe and anode properties. International Journal of Engineering and Innovative Technology, 2, (8), p. 23-27.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Superhydrophobic honeycomb-like cobalt stearate thin films on aluminum with excellent anti-corrosion properties. Applied surface science, 407, p. 361-370.

Xiong Jiawei, Sarkar Dilip K. et Chen X-Grant. (2017). Ultraviolet-durable superhydrophobic nanocomposite thin films based on cobalt stearate-coated TiO2 nanoparticles combined with polymethylhydrosiloxane. ACS Omega, 2, (11), p. 8198-8204.

Xu Na, Sarkar Dilip K., Chen X-Grant et Tong Weiping. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, p. 173-184.

Xu Na, Sarkar Dilip K., Grant Chen X., Zhang Hui et Tong Weiping. (2016). Superhydrophobic copper stearate/copper oxide thin films by a simple one-step electrochemical process and their corrosion resistance properties. RSC Advances, 6, (42), p. 35466-35478.

Xu Wei, Rajan Karthikeyan, Chen X-Grant et Sarkar Dilip K.. (2019). Facile electrodeposition of superhydrophobic aluminum stearate thin films on copper substrates for active corrosion protection. Surface & Coatings Technology,

Yin Guofan, Otis Martin J.-D., Fortin Pascal E. et Cooperstock Jeremy R.. (2019). Evaluating multimodal feedback for assembly tasks in a virtual environment. Proceedings of the ACM on Human-Computer Interaction, 3, (EICS), e21.

Youssef Khaled et Otis Martin J.-D.. (2020). Reconfigurable fully constrained cable driven parallel mechanism for avoiding interference between cables. Mechanism and Machine Theory, 148, (103781), p. 1-22.

Yudovskaya Marina A., Kinnaird Judith A., Grobler Danie F., Costin Gelu, Abramova Vera D., Dunnett Tim et Barnes Sarah-Jane. (2017). Zonation of Merensky-Style platinum-group element mineralization in Turfspruit Thick Reef Facies (Northern Limb of the Bushveld Complex). Economic Geology, 112, (6), p. 1333-1365.

Zhang Zhan, Arici Anil, Breton Francis et Chen X-Grant. (2023). Influence of transition elements (Zr, V, and Mo) on microstructure and tensile properties of AlSi8Mg casting alloys. Canadian Metallurgical Quarterly, p. 1-10.

Article publié dans une revue sans comité d'évaluation

Fofana Issouf et N’Cho Janvier Sylvestre. (2024). Liquides isolants en électrotechnique - Caractérisation et propriétés. Conversion de l'énergie électrique,

Fortin Guy, Mayer Christine et Perron Jean. (2008). Icing wind tunnel study of a wind turbine blade deicing system : simulation of deicing wind turbine blades with controlled electro-thermal systems. SEA Technology, 49, (9), p. 41-44.

Perron Jean. (2019). An alternative to dark matter? A cosmological model of galaxy rotation using cosmological gravity force, FΛ (ALW). Preprints,

Saeidi Ali, Deck Olivier et Verdel Thierry. (2011). Développement d’un simulateur de dommages pour l’évaluation de la vulnérabilité en zone d’aléa minier. Mines & carrières (hors-série), (185), p. 34-38.

Vaidis Maxime et Otis Martin J.-D.. (2020). Human-rover interactions and swarm algorithms of mobile robots in an open and crowded environment: a survey. Preprints, p. 2020090128.

Livre

(2021). Alternative liquid dielectrics for high voltage transformer insulation systems : performance analysis and applications. Hoboken, New Jersey, États-Unis : Wiley-IEEE Press.

(2018). Engineering dielectric liquid applications. Basel, Switzerland : MDPI.

(2022). Outdoor Insulation and Gas Insulated Switchgears. Basel, Switzerland : MDPI.

(2018). Power transformer diagnostics, monitoring and design features. Basel, Switzerland : MDPI.

(2021). Selected Papers from 2020 IEEE International Conference on High Voltage Engineering (ICHVE 2020). Basel, Switzerland : MDPI.

Beroual Abderrahmane et Fofana Issouf. (2016). Discharge in long air gaps: modelling and applications. Briston, UK : IOP Publishing.

Ouhrouche Mohand. (2021). Circuits électriques: Méthodes d’analyse et applications. (2e). Montréal, Qc : Presses internationales Polytechnique.

Perron Jean et Munger Frédérick. (2022). Analyse des systèmes et matrice d'état : exercices multi-physiques. Chicoutimi : Université du Québec à Chicoutimi.

Chapitre de livre

Alameh Abdul Hafiz, Robichaud Alexandre et Nabki Frederic. (2014). A reconfigurable charge pump in 0.13 μm CMOS for agile MEMS actuation. Dans 2014 International Conference on Electronics and Communication Systems (ICECS). (2014, p. 670-673). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Alarie Jonathan, Kiss László, Dion Lukas, Truchon Martin, Santerre Renaud, Guérard Sébastien et Bilodeau Jean-François. (2022). Empirical Prediction of Alumina Dissolution Rate in a Cryolitic Melt: Comparison with the Existing Literature. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 349-356). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Allahdini Anahaita, Momen Gelareh et Jafari Reza. (2019). Fabrication of a durable superhydrophobic coating for high voltage glass insulators. (2019, 2019, ). Montréal, Qc : CIGRE Canada.

Amara Belkacem, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Côté Jules et Gilbert André. (2022). Effect of Coke Type on Partial Replacement of Coke with Modified Biocoke in Anodes Used in Primary Aluminum Production. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 818-825). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Amirkhan F., Robichaud Alexandre, Ropagnol X., Gratuze M., Ozaki T., Nabki Frederic et Blanchard F.. (2020). Simulation study of a piezoelectric micromachined ultrasonic transducer as terahertz differentiator. Dans OSA Advanced Photonics Congress (AP) 2020 (IPR, NP, NOMA, Networks, PVLED, PSC, SPPCom, SOF). (2020, ). Washington, D.C. : The Optical Society.

Ayena Johannes C., Otis Martin J.-D., Chapwouo Tchakouté Landry Delphin et Ménélas Bob-Antoine-Jerry. (2014). Risk of falling assessment at home using an instrumented insole and Smartphone in One-Leg Standing (OLS) test. Dans Proceedings of the 1st Workshop on Mobile Medical Applications. (). New York : Association for Computing Machinery.

Barnes Sarah-Jane. (2016). Chalcophile Elements. Dans William M. White (dir.), Encyclopedia of geochemistry. (p. 1-5). Encyclopedia of Earth Sciences Series. Switzerland : Springer International Publishing.

Bouhassoune Ibtissame, Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Menoui Khalid. (2020). Review of Internet of Things and Design of New UHF RFID Folded Dipole with Double U Slot Tag. Dans Alferd Zimmermann, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 281-291). Smart Innovation, Systems and Technologies. Singapore : Springer.

Bouslimi Y., Fofana Issouf, Hemmatjou Hossein et Volat Christophe. (2010). Static electrification assessment of transformer oils in the spinning disc system. Dans 2010 International Conference on High Voltage Engineering and Application. (2010, ). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Brassard Jean-Denis, Laforte Caroline, Guérin Frédéric et Blackburn Caroline. (2019). Icephobicity : definition and measurement regarding atmospheric icing. Dans Christopher J. Wohl et Douglas H. Berry (dir.), Contamination mitigating polymeric coatings for extreme environments. (p. 123-143). Advances in Polymer Science. Switzerland AG : Springer, Cham.

Carreira A. J., Maghsoudi Khosrow, Momen Gelareh, Jafari Reza et Farzaneh Masoud. (2019). Self-Cleaning Properties of Injection Molded Super-Hydrophobic Silicone Rubber for HV Insulators. Dans INMR World Congress (INMR 2019). (2019, 2019, p. 114). Westmount (Montréal) : INMR.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi-objective optimization. Dans Abdel Ghani Aissaoui et Ahmed Tahour Tahour (dir.), Wind Turbines : Design, Control and Applications. (p. 121-147). Rijeka, Croatia : InTech.

Chehouri Adam, Younès Rafic, Ilinca Adrian et Perron Jean. (2016). Wind turbine design : multi‐objective optimization. Dans Abdel Ghani Aissaoui et Ahmed Tahour (dir.), Wind turbines : design, control and applications. (p. 121-148). Croatia : InTech.

Chehri Abdellah et Fortier Paul. (2020). Wireless positioning and tracking for Internet of Things in heavy snow regions. Dans Alfred Zimmerman, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 395-404). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah et Mouftah Hussein T.. (2020). Localization for vehicular ad hoc network and autonomous vehicles, are we done yet? Dans Mouftah T. Hussein, Melike Erol-Kantarci et Sameh Sorour (dir.), Connected and Autonomous Vehicles in Smart Cities. (1st Ed., ). Boca Raton, FL : CRC Press.

Chehri Abdellah, Quadar Nordine et Saadane Rachid. (2020). Communication and localization techniques in VANET network for intelligent traffic system in smart cities: a review. Dans Xiaobo Qu, Lu Zhen, Robert J. Howlett et Lakhmi C Jain (dir.), Smart Transportation Systems 2020. (p. 167-177). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah et Saeidi Ali. (2021). IoT and Deep Learning Solutions for an Automated Crack Detection for the Inspection of Concrete Bridge Structures. Dans Human Centred Intelligent Systems. (244, p. 110-119). Smart Innovation, Systems and Technologies book series (SIST, volume 244). Singapore : Springer.

Chehri Abdellah et Zimmermann Alfred. (2021). 5G Assisted Smart Manufacturing and Industrial Automation. Dans Advances in the Human Side of Service Engineering. (266, p. 385-393). Lecture Notes in Networks and Systems, vol 266. Cham : Springer.

Chehri Abdellah et Zimmermann Alfred. (2020). Spectrum management of power line communications networks for industrial applications. Dans Alferd Zimmermann, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 173-182). Smart Innovation, Systems and Technologies. Singapore : Springer.

Chehri Abdellah, Zimmermann Alfred, Zoungrana Wend-Benedo et Ezzaidi Hassan. (2021). Rotating Machinery Condition Monitoring Using Time Series Analysis of Vibration Signal. Dans Human Centred Intelligent Systems. (244, p. 232-242). Smart Innovation, Systems and Technologies book series (SIST, volume 244). Singapore : Springer.

Chehri Hamou, Chehri Abdellah et Saadane Rachid. (2021). Traffic Signs Detection and Recognition System in Snowy Environment Using Deep Learning. Dans Innovations in Smart Cities Applications Volume 4. (183, p. 503-513). Lecture Notes in Networks and Systems book series (LNNS, volume 183). Cham : Springer.

Dion-Martin Olivier, Fafard Mario, Rahem Ahmed et D'Amours Guillaume. (2013). Characterization of AA5754 alloy for identification of Barlat's YLD2000‐2d yield criterion. Dans Jiann‐Yang Hwang, Chengguang Bai, John Carpenter, Shadia J. Ikhmayies, Bowen Li, Sergio Neves Monteiro, Zhiwei Peng et Mingming Zhang (dir.), Characterization of Minerals, Metals, and Materials 2013. (p. 53-65). Hoboken, N.J : Wiley.

Farzaneh Masoud et Laforte Jean-Louis. (1997). A laboratory simulation of wet icing build-up On H.V. insulators. Dans The Seventh International Offshore and Polar Engineering Conference. (1997, ). Golden, Colo. : International Society of Offshore and Polar Engineers.

Farzaneh Masoud, Volat Christophe et Leblond Andrée. (2008). Anti-icing and de-icing techniques for overhead lines. Dans Atmospheric Icing of Power Networks. (p. 229-268). Netherlands : Springer.

Fofana Issouf et Sabau John. (2008). Application of Petroleum-based oil in Power Transformer. Dans Nathan David et Theo Michel (dir.), Natural Gas Research Progress. (). New York : Nova Science Publishers.

Fofana Issouf, Zié Y. et Farzaneh Masoud. (2009). Dielectric Response methods for diagnostics of Power equipment. Dans Ai Huang (dir.), Recent Advances in Dielectric Materials. (p. 249-299). New York : Nova Science Publishers.

Gaborit Gwenaël, Gillette Laurane, Revillod Guillaume, Dahdah Jean, Duvillaret Lionel, Volat Christophe, Pons Christian, Bic Emmanuel, Giannini Laura et Dumont Erwan. (2016). Electrical diagnostics of high voltage devices via high resolution near field analysis. Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 555-558). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Guglielmetti Aurore, Buiron Nicolas, Marceau Daniel, Rachik M. et Volat Christophe. (2012). Modelling of tubes magnetic pulse welding. Dans Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis 2012. (2012, p. 561-572). New York, NY : American Society of Mechanical Engineers.

Hedir Abdallah, Lamrous Omar, Fofana Issouf, Slimani Ferhat et Moudoud Mustapha. (2021). Critical issues in XLPE-based polymer nanocomposites and their blends. Dans Jince Thomas, Sabu Thomas et Zakiha Ahmad (dir.), Crosslinkable polyethylene based blends and nanocomposites. (p. 63-83). Materials Horizons: From Nature to Nanomaterials book series (MHFNN). Singapore : Springer.

Hermosilla-Lara Guillaume, Momen Gelareh, Marty Philippe, Leneindre B. et Hassouni Khaled. (2005). Hydrogen storage by adsorption on activated carbon: experimental and numerical study. Dans J. L. G. Fierro et M. A. Peña (dir.), Proceedings of the 2nd European Hydrogen Energy Conference, Zaragoza (Spain) Nov 22-25, 2005. (p. 213-214). Amsterdam : Elsevier.

Issa Ali, Hakem Nadir, Kandil Nahi et Chehri Abdellah. (2020). Performance analysis of mobile network software testbed. Dans Alfred Zimmerman, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 305-319). Smart Innovation, Systems and Technologies. Singapore : Springer.

Jafari Reza, Chameau Marc, Farzaneh Masoud et Momen Gelareh. (2018). Superhydrophobic and highly oleophilic polystyrene fibers (PS) with delayed freezing time and effective oil adsorption. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, ). Switzerland : Materials Science Forum.

Jeon Gwanggil et Chehri Abdellah. (2021). Security analysis using deep learning in IoT and Intelligent Transport System. Dans Xiaobo Qu, Lu Zhen, Robert J. Howlett et Lakhmi C. Jain (dir.), Smart Transportation Systems 2021. (). Smart Innovation, Systems and Technologies. Singapore : Springer.

Kocaefe Duygu, Sarkar Arunima, Das Shipan, Amrani Salah, Bhattacharyay Dipankar, Sarkar Dilip K., Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. (2013). Review of different techniques to study the interactions between coke and pitch in anode manufacturing. Dans Barry A. Sadler (dir.), Light Metals 2013. (p. 1045-1050). The Minerals, Meatls & Materials Series. Switzerland AG : Springer, Cham.

Kone Gbah et Volat Christophe. (2016). Numerical investigation of transient potential distribution along stress-grading on stators bars (Roebel Type). Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 9-12). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Kone Gbah, Volat Christophe, Ezzaidi Hassan et Duvillaret Lionel. (2016). Experimental investigation of internal defect detection of a 69-kV composite insulator. Dans 2016 IEEE Electrical Insulation Conference (EIC). (2016, p. 260-263). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Laforte Caroline, Brassard Jean-Denis et Volat Christophe. (2019). Extended evaluation of icephobic coating regarding their field of application. Dans IWAIS 2019. (2019, p. 1-5). International Workshop on the Atmospheric Icing of Structures.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2016). Development of a Nanodielectric TiO2 coating based on silicone rubber. Dans NANO 2016 – XIIIth International Conference on Nanostructured. (2016, 2016, ). Lund, Sweden : International Committee on Nanostructured Materials.

Madidi Fatima Zahra, Momen Gelareh et Farzaneh Masoud. (2013). Effect of filler concentration on dielectric properties of RTV silicone rubber/TiO2 nanocomposite. Dans 2013 IEEE Electrical Insulation Conference (EIC). (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Maghsoudi Khosrow, Jafari Reza, Momen Gelareh et Farzaneh Masoud. (2018). Fabrication of Polymer Micro-Nanostructured Surfaces: Mold Inserts, Processing Parameters and Demolding. Dans Valente Erasmo Silva (dir.), Polymer surfaces: fabrication, modification and applications. (). Polymer Science and Technology. New York : Nova Science Publishers.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured Silicone Rubber Surfaces Using Compression Molding. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, 2018, ). Switzerland : Materials Science Forum.

Momen Gelareh et Farzaneh Masoud. (2011). Study of ice accumulation on nanocomposite semiconducting coatings. Dans 2010 Annual Report Conference on Electrical Insulation and Dielectic Phenomena. (). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Ouafiq El Mehdi, Elrharras Abdessamad, Mehdary A., Chehri Abdellah, Saadane Rachid et Wahbi M.. (2020). IoT in smart farming analytics, big data based architecture. Dans Alfred Zimmermann, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 269-279). Smart Innovation, Systems and Technologies. Singapore : Springer.

Perron Jean et Larocque Jacques. (2013). Alumina Crystallizer Mixing Using CFD. Dans Don Donaldson et Benny E. Raahauge (dir.), Essential Readings in Light Metals: Alumina and Bauxite, Volume 1. (p. 563-569). Hoboken, N.J. : John Wiley.

Quadar Nordine, Chehri Abdellah et Jeon Gwanggil. (2020). Visual analytics methods for eye tracking data. Dans Alfred Zimmerman, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 3-12). Smart Innovation, Systems and Technologies. Singapore : Springer.

Quadar Nordine, Chehri Abdellah, Jeon Gwanggil et Ahmad Awais. (2020). Smart water distribution system based on IoT networks, a critical review. Dans Alfred Zimmermann, Robert J Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 293-303). Smart Innovation, Systems and Technologies. Singapore : Springer.

Richer T., Dion Lukas, Kiss László, Guérard Sébastien, Bilodeau Jean-François et Rakotondramanana L.. (2022). Mass Transport by Waves: Physical Model with Coalescence, Fragmentation, and Displacement on a Bath-Metal Interface. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 371-380). The Minerals, Metals & Materials Series. Pittsburgh, Pennsylvania : TMS.

Robichaud Alexandre, Alameh Abdul Hafiz, Nabki Frederic et Deslandes Dominic. (2013). An agile matching network using phase detection for antenna tuning. Dans 2013 IEEE 20th International Conference on Electronics, Circuits, and Systems (ICECS). (2013, p. 755-758). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Robichaud Alexandre, Boudreault Martin et Deslandes Dominic. (2012). Parametric analysis of helical resonators for resonant wireless power transmission links. Dans 10th IEEE International NEWCAS Conference. (2012, p. 405-408). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Robichaud Alexandre, Nabki Frederic et Deslandes Dominic. (2016). An efficient reference-based adaptive antenna impedance matching CMOS circuit. Dans 2016 IEEE International Symposium on Circuits and Systems (ISCAS). (2016, p. 1402-1405). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Roger Thomas, Kiss László, Dion Lukas, Guérard Sébastien, Bilodeau Jean-François, Bonneau Guillaume, Santerre R. et Fraser Kirk A.. (2022). Modeling of the Heat Exchange, the Phase Change, and Dissolution of Alumina Injected in Electrolysis Cells. Dans Dmitry Eskin (dir.), Light Metals 2022. (p. 363-370). The Minerals, Metals & Materials Series. Cham, Switzerland : Springer.

Rozga Pawel, Jayasree T., Ungarala Mohan Rao, Fofana Issouf et Picher Patrick. (2021). Prebreakdown and Breakdown Phenomena in Ester Dielectric Liquids. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 147-183). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

Saber Mohamed, Chehri Abdellah, El Rharras Abdessamad, Saadane Rachid et Wahbi Mohammed. (2021). A Cognitive Radio Spectrum Sensing Implementation Based on Deep Learning and Real Signals. Dans Mohamed Ben Ahmed, Ismail Rakıp Karaș, Domingos Santos, Olga Sergeyeva et Anouar Abdelhakim Boudhir (dir.), The Proceedings of the 5th International Conference on Smart City Applications, volume 4. (p. 930-941). Lecture Notes in Networks and Systems. Cham, Switzerland : Spriger.

Saber Mohamed, Chehri Abdellah, Rharras Abdessamad El, Saadane Rachid et Wahbi Mohammed. (2021). A Cognitive Radio Spectrum Sensing Implementation Based on Deep Learning and Real Signals. Dans Innovations in Smart Cities Applications Volume 4. (183, p. 930-941). Lecture Notes in Networks and Systems book series (LNNS, volume 183). Cham : Springer.

Slalmi Ahmed, Saadane Rachid, Chehri Abdellah et Kharraz Hatim. (2020). How will 5G transform industrial IoT: latency and reliability analysis. Dans Alfred Zimmermann, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 335-345). Smart Innovation, Systems and Technologies. Singapore : Springer.

Thongam Jogendra Singh et Ouhrouche Mohand. (2011). MPPT Control Methods in Wind Energy Conversion Systems. Dans Carriveau Rupp (dir.), Fundamental and Advanced Topics in Wind Power. (p. 339-360). London, UK : IntechOpen.

Tremblay Nicolas, Kamali Kaveh, Cardou Philippe, Desrosiers Christian, Gouttefarde Marc et Otis Martin J.-D.. (2019). Eye-on-hand calibration method for cable-driven parallel robots. Dans Andreas Pott et Tobias Bruckmann (dir.), Cable-driven parallel robots : proceedings of the 4th International Conference on Cable-Driven Parallel Robots. (p. 345-356). Cham, Switzerland : Springer.

Ungarala Mohan Rao, Fofana Issouf et Loiselle Luc. (2021). Behavior of Ester Liquids Under Various Operating Fault Conditions. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 305-320). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

Ungarala Mohan Rao, Fofana Issouf, Loiselle Luc et Jayasree T.. (2021). End Life Behavior of Ester Liquids in High-Voltage Transformers. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 127-146). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

Ungarala Mohan Rao, Fofana Issouf et Rodriguez Celis E.. (2021). Liquid Insulation for Power Transformers. Dans Mohan Rao Ungarala, Issouf Fofana et Ramanujam Sarathi (dir.), Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications. (p. 1-9). IEEE Press Series on Power and Energy Systems. Hoboken, New Jersey : Wiley-IEEE Press.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Simple fabrication of superhydrophobic surfaces using atmospheric-pressure plasma. Dans International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (THERMEC). (2018, ). Switzerland : Materials Science Forum.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Wetting and Self-Cleaning Properties of Silicone Rubber Surfaces Treated by Atmospheric Plasma Jet. Dans 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). (p. 239-242). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Volat Christophe, Meghnefi Fethi et Farzaneh Masoud. (2010). A simple method to assess ice built-up severity in EHV substations. Dans 2010 International Conference on High Voltage Engineering and Application. (2010, p. 282-285). Piscataway, NJ : Institute of Electrical and Electronics Engineers.

Zoungrana Wend-Benedo, Chehri Abdellah et Zimmermann Alfred. (2020). Automatic classification of rotating machinery defects using Machine Learning (ML) algorithms. Dans Alferd Zimmermann, Robert J. Howlett et Lakhmi C. Jain (dir.), Human centred intelligent systems. (p. 193-203). Smart Innovation, Systems and Technologies. Singapore : Springer.

Matériel non publié (rapport, etc.)

Bachir Cherif Kahina, Rebaïne Djamal, Erchiqui Fouad et Fofana Issouf. (2015). Metaheuristics as a solving approach for the infrared heating in the thermoforming process. Groupe d'études et de recherche en analyse des décisions GERAD.

Boussetoua Mohammed, Ouhrouche Mohand et Perron Jean. (2011). 10 kW Mast-Mounted Transverse Flux PM Generator for Main Rotor De-Icing. AMIL Report 2011-MB-01.

Boussetoua Mohammed, Ouhrouche Mohand et Perron Jean. (2008). Concept Demonstration of a Transversal Magnetic Flux Generator. AMIL Report 2008-MB-01.

Boussetoua Mohammed, Ouhrouche Mohand et Perron Jean. (2007). Literature Revue: Mast-Mounted Generator. AMIL Report 2007-MB-01.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2008). Investigation des différentes alternatives renouvelables et hybrides pour l'électrification des sites isolés : rapport interne. Université du Québec à Rimouski, Laboratoire de recherche en énergie éolienne, Université du Québec à Chicoutimi, Laboratoire international des matériaux antigivre.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Moteur diesel suralimenté : bases et calculs, cycles réel, théorique et thermodynamique : rapport interne. Université du Québec à Rimouski - Laboratoire de recherche en énergie éolienne LREE, Université du Québec à Chicoutimi - Laboratoire international des matériaux antigivre LIMA.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. (2006). Solutions de stockage de l'énergie éolienne : rapport interne. UQAR - Laboratoire de recherche groupe éolien LRGE.

Rouleau Alain, Daigneault Réal, Walter Julien, Germaneau Denis, Tremblay Marie-Line et Lambert Mélanie. (2013). Résultats du programme d’acquisition de connaissances sur les eaux souterraines de la région Saguenay-Lac-Saint-Jean. Centre d'études sur les ressources minérales.

Matériel de conférence

Allahdini Anahita, Jafari Reza et Momen Gelareh. (2021). Development of a dual capsule self-healing silicone composite using poly(melamine-urea-formaldehyde) shells. Dans : 36th International Conference of the Polymer Processing Society , September 26-29, 2021, Montréal, Canada.

Amrani M.L., Bouazabia S., Fofana Issouf, Meghnefi Fethi et Jabbari Marouane. (2020). On discharge inception voltage for insulators under non-uniform field with AC voltage. Dans : 2019 International Conference on Advanced Electrical Engineering (ICAEE) , 19-21 Nov. 2019, Algiers, Algeria.

Amrani Salah, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Blainey Jerry. Quantitative evaluation of the cracking of carbon anodes by image analysis for aluminum industry. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Arguin Jean-Philippe, Pagé Philippe, Girard Réjean et Barnes Sarah-Jane. The spatial variation of mineralogy in the vanadiferous magnetite deposit of the Lac Doré Complex (Chibougamau, Québec) and its implications on the chemical purity of magnetite concentrates. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Asadollahi Siavash, Jafari Reza et Farzaneh Masoud. (2016). Effect of HMDSO flow rate in nitrogen atmospheric plasma on the superhydrophobic characteristics of organosilicon-based coatings. Dans : 2016 IEEE International Conference on Plasma Science (ICOPS) , 19-23 June 2016, Banff, AB, Canada.

Ayena Cossoun Johannes, Chapwouo T. Landry D., Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. An Efficient Home-Based Risk of Falling Assessment Test Based on Smartphone and Instrumented Insole. Dans : IEEE International Symposium on Medical Measurements and Applications , 7-9 May 2015, Turin, Italy.

Baiteche Mounir, Kocaefe Yasar S., Kocaefe Duygu, Morais Brigitte et Lafrance Jacques. A 3D mathematical model of a horizontal anode baking furnace as a design tool. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Barkallah Eya, Otis Martin J.-D., Ngomo Suzy et Heraud Michel. Measuring operator’s pain : toward evaluating Musculoskeletal disorder at work. Dans : IEEE International Conference on Systems, Man, and Cybernetics (SMC) , 9-12 Oct. 2015, Kowloon, Hong Kong.

Barnes Sarah-Jane. Chalcophile element concentrations in magmatic nickel sulphide deposits. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Barnes Sarah-Jane, Melezhik Victor A. et Sokolov Stanislav V.. Chalcophile element concentrations in the Pechenga sulphides : comparison with the Cape Smith sulphides. Dans : IGCP Project 427 - Abstracts from the 1999 field conference in Rouyn-Noranda on Ore Forming Processes in Dynamic Magmatic Systems , 15-17 July 1999, Rouyn-Noranda, QC.

Basbous Tammam, Younès Rafic, Ilinca Adrian et Perron Jean. Pneumatic hybridization of diesel engine in a hybrid wind-diesel installation with compressed air energy storage. Dans : 4th Int. Conference on Integrated Modeling and Analysis in Applied Control and Automation, IMAACA 2010, Held at the International Mediterranean and Latin American Modeling Multiconference, I3M 2010 , October 13-15, 2010, Fes, Maroc.

Bédard Frédéric, Fiset Mathieu, Bastien Josée et Mitchell Denis. (2019). Shear strengthening of thick concrete slabs accounting for loading during strengthening. Dans : Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5 , 15–17 July 2019, London, United Kingdom.

Beisswenger Arlene. (2006). AS-5900 some changes. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2006, Lisbon, Portugal.

Beisswenger Arlene. (2008). AS5900 Update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 12, 2008, Warsaw, Pologna.

Beisswenger Arlene. (2007). AS5900 Update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 14, 2007, Montréal, Québec.

Beisswenger Arlene. (2010). AS5900 Update (Areodynamic Testing). Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2010, Montréal, Québec.

Beisswenger Arlene. (2007). Snow pellets tests. Dans : SAE Holdover Time Sub-Committee , Novembre 14, 2007, Montréal, Québec.

Beisswenger Arlene, Laforte Caroline et Perron Jean. (2011). Issues and testing of non-glycol aircraft ground deicing fluids. Dans : SAE Technical Papers - SAE 2011 International Conference on Aircraft and Engine Icing and Ground Deicing , 13-17 June 2011, Chicago, IL.

Beisswenger Arlene et Leroux Jacques. (2011). AMS1428 : rewording of rational for section 3.2.2.5 thin film thermal stability (to simulate heated leading edge dry out). Dans : SAE G-12 Fluids Subcommittee Meeting , May 2011, San Francisco, CA.

Beisswenger Arlene et Perron Jean. Laboratory testing of aircraft anti-icing fluid rehydrated gel residues. Dans : SAE Technical Papers - SAE Aircraft and Engine Icing International Conference , 24-27 September 2011, Seville; Spain.

Beisswenger Arlene, Wang Xiaofei, Laforte Jean-Louis et Perron Jean. Simulation of freezing and frozen precipitation for the evaluation of de/anti-icing systems. Dans : SAE Tehnical Paper Series, SAE Aircraft & Engine Icing International Conference , Septembre 24-27, 2007, Seville, Spain.

Ben Brahem Mahmoud, Ayena Cossoun Johannes, Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. Risk of falling assessment on different types of ground using the instrumented TUG. Dans : 2015 IEEE International Conference on Systems, Man, and Cybernetics (SMC), , 9-12 Oct. 2015, Kowloon, Hong Kong.

Benaissa Sanae, Momen Gelareh, Harvey Derek, Taghavi Seyed Mohammad et Khawaja Hassan. (2023). Optimization of ground icing protection for aircraft : snow endurance tests, rheological analysis and thermography of anti-icing fluids. Dans : Concours d'affiches

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. A non-destructive technique for the on-line quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Benzaoui Abderrahmane, Kocaefe Duygu, Bhattacharyay Dipankar, Kocaefe Yasar S. et Desmeules Jean-François. An experimental testing of the SERMA technology for the quality control of green and baked anodes. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Bhattacharyay Dipankar, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Gagnon Marc. Study of the effect of granulometry on coke bulk density using artificial neural network. Dans : Materials Science & Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Bihamta Reza, D'Amours Guillaume, Bui Quang-Hien, Rahem Ahmed, Guillot Michel et Fafard Mario. (2010). Optimization on the production of variable thickness aluminium tubes. Dans : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, MSEC2010 , October 12-15, 2010, Erie, Pennsylvania.

Bihamta Reza, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Numerical studies on the production of variable thickness aluminium tubes for transportation purposes. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Boudraa S., Mokhnache L., Fofana Issouf et Benabed F.. (2021). Study of spectral response of transformer oil under low electrical discharge and thermal stress. Dans : 18th International Multi-Conference on Systems, Signals & Devices (SSD) , March 22-25, 2021, Monastir, Tunisia & Virtual.

Bouhassoune Ibtissame, Chaibi Hasna, Chehri Abdellah, Saadane Rachid et Minaoui Khalid. (2020). Design of Folded Dipole with Double U Shaped Slot UHF RFID Tag Using Genetic Algorithm Optimization for Healthcare Sensing Applications. Dans : Third International Conference on Smart City Applications, SCA 2020 , 7-9 october, 2020, Karabuk, Turkey.

Boulanger Joan, Lalancette Francis, Gosselin A., Dion Lukas, Gaboury Simon, Guimond L., Simard C. et Blais A.. (2020). A taxonomy of low-voltage perfluorocarbon emissions in primary aluminium production cells. Dans : Conference of Metallurgists , 24-27 aug 2020, Fairmont Royal York, Toronto.

Boussetoua Mohammed, Perron Jean et Ouhrouche Mohand. Contribution to the study and design of an electro-thermal de-icing/anti-icing system applied to rotorcraft. Dans : 70th American Helicopter Society international annual forum 2014 , 20-22 May 2014, Montreal, Quebec.

Bouvais Adrien, Dion Lukas, Roger Thomas, Kiss László, Bonneau Guillaume, Bilodeau Jean-François et Guérard Sébastien. (2021). Experimental Study and Visualization of the Thermal and Dissolution Flux Using Schlieren Methods to Improve the Understanding of the Kinetics of Alumina Dissolution in Cryolitic Melts. Dans : 39th Hybrid Conference and Exhibition ICSOBA 2021 , 22-25 November 2021, Manama, Bahrain & online.

Brassard Jean-Denis. (2020). Runway Deicing Product Anti-icing Performance Test Working Group Update. Dans : SAE G-12 Runway Deicing Product RDP Committees , November 02, 2020

Brassard Jean-Denis et Laforte Caroline. (2017). Silicone based icephobic coating assessment under offshore winter conditions. Dans : 27th International Ocean and Polar Engineering Conference , June 25–30, 2017, San Francisco, California, USA.

Brassard Jean-Denis, Laforte Caroline, Tremblay Marc Mario et Volat Christophe. (2019). Runway Deicing Product Anti/Deicing Performance Assessment: Review and Future Directions. Dans : International Conference on Icing of Aircraft, Engines, and Structures SAE International , June 17-21, 2019, Minneapolis USA.

Brassard Jean-Denis, Laforte Caroline et Volat Christophe. (2019). Type IV anti-Icing Fluid Subjected to Light Freezing Rain: Visual and Thermal Analysis. Dans : International Conference on Icing of Aircraft, Engines, and Structures, SAE International , June 17-21 2019, Minneapolis USA.

Brassard Jean-Denis, Perron Jean et Sarkar Dilip K.. (2016). A short review on the applications of the superhydrophobic coatings on metals. Dans : 28th International Mineral Processing Congress, IMPC 2016 , 11-15 September 2016, Quebec City Convention CenterQuebec City.

Brassard Simon, Otis Martin J.-D., Poirier Alexendre et Ménélas Bob-Antoine-Jerry. Towards an automatic version of the Berg Balance Scale test through a serious game. Dans : Second ACM Workshop on Mobile Systems, Applications, and Services for Healthcare , November 6–9, 2012, Toronto, ON, Canada.

Bui Quang-Hien, Bihamta Reza, Guillot Michel, D'Amours Guillaume, Rahem Ahmed et Fafard Mario. (2011). A new method for determination of formability limit in the tube drawing process. Dans : TMS2011 Annual Meeting & Exhibition : Supplemental Proceedings : Volume 3 : General Paper Selections , 27 February - March 3, 2011, San Diego, California.

Bui Rung-Tien, Hachette R., Simard G., Perron Jean et Dessureault J. F.. Computer simulation of the anthracite calcining furnace. Dans : Light metals 1999 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the 128th TMS Annual Meeting , February 28-March 4, 1999, San Diego, California.

Bui Rung-Tien, Hachette R., Simard G., Perron Jean et Dessureault J. F.. A control strategy for the anthracite calciner. Dans : Light metals 2000 : proceedings of the International Symposium on Light Metals - MetSoc 39th Annual Conference of Metallurgists of CIM , August 20-23, 2000, Ottawa, Ontario.

Bui Rung-Tien, Perron Jean et Fillion C.. Model-based control for industrial processes using a virtual laboratory. Dans : 13th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE 2000 , June 19–22, 2000, New Orleans, Louisiana.

Bui Rung-Tien, Tikasz L.G. et Perron Jean. Trends in intelligent process control methods in the primary aluminum industry. Dans : IPPM'99 : proceedings of the Second International Conference on Intelligent Processing and Manufacturing of Materials : Hilton Hawaiian Village Hotel , July 10-15, 1999, Honolulu, Hawaii.

Cave Ben J., Barnes Sarah-Jane, Sack Patrick J., Pitcairn Iain K., Johnson Sean C. et Kuikka Helena. Semi-metal and base metal mobility in the metasedimentary contact aureole surrounding the Dublin Gulch reduced intrusion-related gold system (RIRGS), Yukon, Canada. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Chehri Abdellah. (2021). Contention Based Medium Access Control Protocol for Point-To-Multipoint Backhaul Networks in the 3.65 GHz Band. Dans : 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting , 4-10 December 2021, Marina Bay Sands, Singapore.

Chehri Abdellah. (2019). A low complexity turbo equalizer for power-line communication with applications to smart grid networks. Dans : 2019 IEEE International Symposium on Power Line Communications and its Applications (ISPLC) , 3-5 April 2019, Prague, Czech Republic.

Chehri Abdellah. (2020). Non-cooperative spectrum allocation based on game theory in IoT-Oriented narrowband PLC networks. Dans : 2020 IEEE 91st Vehicular Technology Conference (VTC2020-Spring) , 25-28 May 2020, Antwerp, Belgium.

Chehri Abdellah, Chehri Hamou, Hakim Nadir et Saadane Rachid. (2020). Realistic 5.9 GHz DSRC vehicle-to-vehicle wireless communication protocols for cooperative collision warning in underground mining. Dans : Proceedings of 3rd KES-STS International Symposium, Smart Transportation Systems 2020, Smart Innovation, Systems and Technologies book series (SIST, volume 185) , 17-19 June 2020, Virtual Conference Centre.

Chehri Abdellah et Fortier Paul. (2020). Autonomous vehicles in underground mines, where we are, where we are going? Dans : 2020 IEEE 91st Vehicular Technology Conference (VTC2020-Spring) , 25-28 May 2020, Antwerp, Belgium.

Chehri Abdellah et Fortier Paul. (2019). Low-cost localization and tracking system with wireless sensor networks in snowy environments. Dans : Proceedings of KES-InMed-19 and KES-IIMSS-19 Conferences : Innovation in Medicine and Healthcare Systems, and Multimedia , 17-19 June 2019, St. Julians, Malta.

Chehri Abdellah et Jeon Gwanggil. (2019). The Industrial Internet of Things: examining how the IIoT will improve the predictive maintenance. Dans : Proceedings of KES-InMed-19 and KES-IIMSS-19 Conferences : Innovation in Medicine and Healthcare Systems, and Multimedia , 17-19 June 2019, St. Julians, Malta.

Chehri Abdellah et Jeon Gwanggil. (2019). Routing protocol in the industrial Internet of Things for smart factory monitoring. Dans : Proceedings of KES-InMed-19 and KES-IIMSS-19 Conferences : Innovation in Medicine and Healthcare Systems, and Multimedia , 17-19 June 2019, St. Julians, Malta.

Chehri Abdellah et Mouftah Hussein T.. (2018). New MMSE downlink channel estimation for sub-6 GHz Non-Line-of-Sight backhaul. Dans : 2018 IEEE Globecom Workshops (GC Wkshps) , 9-13 Dec. 2018, Abu Dhabi, United Arab Emirates.

Chehri Abdellah et Mouftah Hussein T.. (2020). PHY-MAC MIMO precoder design for sub-6 GHz backhaul small cell. Dans : 2020 IEEE 91st Vehicular Technology Conference (VTC2020-Spring) , 25-28 May 2020, Antwerp, Belgium.

Chehri Abdellah, Quadar Nordine et Saadane Rachid. (2019). Survey on localization methods for autonomous vehicles in smart cities. Dans : SCA '19: Proceedings of the 4th International Conference on Smart City Applications , October 2019, Casablanca Morocco.

Chehri Abdellah et Saadane Rachid. (2019). Zigbee-based remote environmental monitoring for smart industrial mining. Dans : SCA '19: Proceedings of the 4th International Conference on Smart City Applications , October 2019, Casablanca Morocco.

Chehri Hamou, Chehri Abdellah et Hakem Nadir. (2019). Empirical radio channel characterization at 5.9 GHz for vehicle-to-infrastructure communication. Dans : 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall) , 22-25 Sept. 2019, Honolulu, HI, USA.

Chehri Hamou, Chehri Abdellah et Saadane Rachid. (2020). Traffic Signs Detection and Recognition System in Snowy Environment Using Deep Learning. Dans : The Proceedings of the Third International Conference on Smart City Applications, SCA 2020: Innovations in Smart Cities Applications Volume 4 , 7-9 october, 2020, Karabuk, Turkey.

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Crashworthiness of aluminium tubes ; Part 2: improvement of hydroforming operation to increase absorption energy. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

D'Amours Guillaume, Rahem Ahmed, Mayer Robert, Williams Bruce et Worswick Michael. (2007). Effects of mesh size and remapping on the predicted crash response of hydroformed tubes. Dans : The 6th European LS-DYNA Users' Conference , May 2007, Gothenburg, Sweden.

D'Amours Guillaume, Rahem Ahmed, Williams Bruce, Worswick Michael et Mayer Robert. (2007). Crashworthiness of aluminium tubes ; Part 1 : Hydroforming at different corner-fill radii and end feeding levels. Dans : AIP Conference Proceedings, Materials Processing and Design; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes , 17-21 June 2007, Porto, Portugal.

De Debasis, Sarkar Dilip K. et Kocaefe Duygu. Nanostructured superhydrophobic ZnO surface layer on Al-substrate. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Desgroseillers B., Perron Jean, Laurin P., Ménard O. et Martin J.. Combustion of petroleum coke dust as a partial substitute for natural gas and oil in the alumina trihydrate calcination process. Dans : Light Metals 1996: Proceedings of the Technical Sessions Presented by the Tms Light Metals Committee at the 125th Tms Annual Meeting , February 4-8 1996, Anaheim, California.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Numerical simulation of the energy production losses due to icing of a wind turbine. Dans : International Conference on Energy Conversion and Conservation - CICME'10 , April 22-25, 2010, Hammamet, Tunisia.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Simulation numérique des pertes énergétiques d'une éolienne dues au givrage. Dans : CanWEA 2010 Conference and Exhibition , 1-3 novembre, 2010, Montreal, Quebec.

Dimitrova Mariya Hristova, Ibrahim Hussein, Fortin Guy, Ilinca Adrian et Perron Jean. Software tool to predict the wind Energy production losses due to icing. Dans : 2011 IEEE Electrical Power and Energy Conference , 3-5 october 2011, Winnipeg, MB, Canada.

Dion Lukas, Gaboury Simon, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2018). New approach for quantification of perfluorocarbons resulting from high voltage anode effects. Dans : 147th Annual Meeting & Exhibition, TMS Ligth Metals 2018 , March 11-15, 2018, Phoenix, AZ.

Dion Lukas, Kiss László, Chartrand Patrice, Dufour Gilles et Laflamme François. (2013). Sodium content in aluminum and current efficiency — correlation through multivariate analysis. Dans : 142nd Annual Meeting & Exhibition, TMS Light Metals 2013 , March 3-7, 2013, San Antonio, Texas.

Dion Lukas, Kiss László et Coursol Pascal. (2012). Development of a dynamic mass balance model for predicting metalpurity at Aluminerie Alouette. Dans : Proceedings of the 8th international conference on mechanical engineering , May 24-25, 2012, Budapest, Hungary.

Dion Lukas, Kiss László, Lavoie Dany et Arvisais Jean-Paul. (2014). Developing a new process indicator based on the relationship between an electrolysis cell impurity balance and its incident. Dans : 143rd Annual Meeting & Exhibition, TMS Light Metals 2014 , February 16-20, 2014, San Diego, CA.

Dion Lukas, Kiss László, Poncsák Sándor et Lagacé Charles-Luc. (2016). Influence of hooding conditions on gas composition at duct end of an electrolysis cell. Dans : 34th International Conference and Exhibition of ICSOBA , 3 to 6 October, 2016, Hotel Palace Royal in Quebec, Quebec.

Dion Lukas, Lagacé Charles-Luc, Evans James W., Victor Ron et Kiss László. (2015). On-line monitoring of anode currents to understand and improve the process control at Alouette. Dans : 144th Annual Meeting & Exhibition, TMS Light Metals 2015 , March 15-19, 2015, Orlando, Florida.

Dion Lukas, Lagacé Charles-Luc, Kiss László et Poncsák Sándor. (2016). Using artificial neural network to predict low voltage anode effect PFCs at the duct end of an electrolysis cell. Dans : 145th Annual Meeting & Exhibition, TMS Light Metals 2016 , February 14-18, 2016, Nashville, Tennessee.

Dion Lukas, Lagacé Charles-Luc, Laflamme François, Godefroy Antoine, Evans James W., Kiss László et Poncsák Sándor. (2017). Preventive treatment of anode effects using on-line individual anode current monitoring. Dans : 146th Annual Meeting & Exhibition, TMS Light Metals 2017 , September 2017, San Diego, CA.

Dion Lukas, Nunez Pernelle, Wong David, Gaboury Simon et Spirin Alexey. (2018). Evaluation of time consistency when quantifying emissions of perfluorocarbons resulting from low voltage anode effects. Dans : 147th Annual Meeting & Exhibition, TMS Ligth Metals 2018 , March 11-15, 2018, Phoenix, AZ.

Duran Charley J., Barnes Sarah-Jane, Pleše Pia, Prašek Marko Kudrna, Pagé Philippe et Zientek Michael L.. Processes controlling the distribution of Te, As, Bi, Sb, and Sn, and the formation of platinum-group minerals in sulphide ores in the Noril’sk mining district (Russia). Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Eke Samuel, Aka-Ngnui Thomas, Clerc Guy et Fofana Issouf. (2020). Power transformer condition monitoring by 2FAL content and CO2/CO ratio – A fuzzy logic approac. Dans : 2019 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 20-23 october 2019, Richland, Washington.

El Hafid Yassine, El Rharras Abdessamad, Chehri Abdellah, Saadane Rachid et Wahbi Mohammed. (2020). Real-time data processing in autonomous vehicles based on distributed architecture: a case study. Dans : Proceedings of 3rd KES-STS International Symposium, Smart Transportation Systems 2020, Smart Innovation, Systems and Technologies book series (SIST, volume 185) , 17-19 June 2020, Virtual Conference Centre.

Errouissi Rachid et Ouhrouche Mohand. (2009). Robust continuous generalized predictive control of a permanent magnet synchronous motor drive. Dans : 2009 IEEE Electrical Power & Energy Conference (EPEC) , 22-23 October 2009, Montreal, QC, Canada.

Errouissi Rachid, Ouhrouche Mohand et Benzaioua Ammar. (2010). Robust nonlinear predictive controller for multivariable nonlinear systems with different relative degree. Dans : 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) , 06-09 july 2010, Montreal, QC, Canada.

Errouissi Rachid, Ouhrouche Mohand et Chen Wen-Hua. (2010). Robust nonlinear generalized predictive control of a permanent magnet synchronous motor with an anti-windup compensator. Dans : IEEE International Symposium on Industrial Electronics (ISIE) , 4-7 July, Bari, Italy.

Evens James W., Dion Lukas, Laflamme François et Lagacé Charles-Luc. (2016). Recent on-line measurements of individual anode currents at Alouette. Dans : 34th International Conference and Exhibition of ICSOBA , 3 to 6 October, 2016, Hotel Palace Royal in Quebec, Quebec.

Ferreira Regelii SA, Ezzaidi Hassan, Fofana Issouf et Picher Patrick. (2021). Transformers Fault Identification by Frequency Response Analysis using Intelligent Classifiers. Dans : 22nd International Symposium on High Voltage Engineering (ISH 2021), , November 21-25, 2021, Xi’an, China.

Ferreira Regelii SA, Sengupta A., Picher Patrick, Fofana Issouf et Ezzaidi Hassan. (2021). Influence of Transformer Structures on the Frequency Response Analysis: A Laboratory Case Study. Dans : 2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , December 12-15, 2021, Vancouver, BC, Canada.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2022). Design of concrete members strengthened in shear with vertical bonded bars. Dans : 11th International Conference on Short and Medium Span Bridgest , July 19-22, 2022, Toronto, Ontario, Canada.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2014). Drilled-in shear reinforcement for concrete thick slabs : modelling aspects. Dans : 10th fib International PhD Symposium in Civil Engineering , July 21 to 23, 2014, Québec, Canada.

Fiset Mathieu, Bastien Josée et Mitchell Denis. (2012). Post-installed shear reinforcement for concrete thick slabs. Dans : 9th fib International PhD Symposium in Civil Engineering , July 22 to 25, 2012, Karlsruhe, Germany.

Fiset Mathieu, Bastien Josée, Mitchell Denis et Jolin Marc. (2012). Renforcement en cisaillement des dalles épaisses en béton armé : étude expérimentale et numérique. Dans : Treizième édition des Journées scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton (RF)²B , 5-6 juillet 2012, Lyon, France.

Fiset Mathieu, Bédard Frédéric, Bastien Josée et Mitchell Denis. (2018). Thick concrete slab bridges : study of shear strengthening. Dans : 10th International Conference on Short and Medium Span Bridges , July 31 – August 3, 2018, Quebec, Canada.

Fiset Mathieu, Parenteau Alexandra, Bilodeau Sébastien, Bastien Josée et Mitchell Denis. (2016). Behaviour of thick concrete members with unbonded transverse reinforcement. Dans : 11th fib International PhD Symposium in Civil Engineering , Aug 29 to 31, 2016, Tokyo, Japan.

Fiset Mathieu, Villemure Félix-Antoine, Bastien Josée, Mitchell Denis et Fournier Benoît. (2013). Effet de l'endommagement sur la résistance au cisaillement des dalles épaisses en béton armé et méthodes de renforcement. Dans : Quatorzième édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)²B , 22-23 août 2013, Sherbrooke, Québec, Canada.

Fleury A., Ranjan R., Shah L., St-Georges Lyne, Rahem Ahmed et Walbridge S.. (2019). Fatigue design of friction stir welded joints in aluminium bridge decks. Dans : CSCE Annual Conference , June 12 - 15, 2019, Laval, Québec.

Fleury Anthony, St-Georges Lyne et Rahem Ahmed. (2018). Effect of welding equipment rigidity on mechanical and physical properties of friction stir welded aluminum 6061-T6. Dans : 12th International Symposium on Friction Stir Welding , 26-28 June 2018, Saguenay, Québec.

Fofana Issouf. (2021). The Gassing of Insulating Fluids. Dans : 2021 International Conference on Electrical Materials and Power Equipment (ICEMPE) , 11-15 April 2021, Chongqing, China.

Fofana Issouf. (2022). Trends in Power Transformer Diagnostic Techniques. Dans : 5th International Conference on Advanced Systems and Emergent Technologies (IC_ASET’2022) , March 22 to 25, 2022, Hammamet, Tunisia.

Fontaine Réjean, Otis Martin J.-D., Jarry Martin, Semmaoui Hicham, Gosselin Marie-Ève, Masson Patrice et Ménard Hugues. Conception d'un BioMicroRobot autonome. Dans : The 2nd Annual IEEE Northeast Workshop on Circuits and Systems, NEWCAS , 20-23 June 2004, Montreal, Canada.

Fortin Guy, Beisswenger Arlene et Perron Jean. Centrifuge adhesion test to evaluate icephobic coatings. Dans : AIAA Atmospheric and Space Environments Conference , 2-5 August 2010, Toronto, Ontario.

Fortin Guy et Perron Jean. Spinning Rotor Blade tests in icing wind tunnel. Dans : 1st AIAA Atmospheric and Space Environments Conference , 22 - 25 June 2009, San Antonio, Texas.

Fortin Guy et Perron Jean. Temperature drop of a wet wing at takeoff. Dans : 43rd AIAA Aerospace Sciences Meeting and Exhibit , 10-13 January, 2005, Reno, Nevada.

Fortin Guy et Perron Jean. Wind turbine icing and de-icing. Dans : 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition , 6-7 january, 2009, Orlando, Florida.

Fortin Guy, Perron Jean et Ilinca Adrian. Behaviour and modeling of cup anemometers under icing conditions. Dans : IWAIS XI : International workshop on atmospheric icing of structures , June 2005, Montreal, Québec.

Fortin Guy, Perron Jean et Ilinca Adrian. Étude des événements de givrage à Murdochville : conclusions pour l'industrie éolienne. Dans : Colloque international Énergie éolienne et sites éloignés , 19-21 Octobre 2005, Îles de la Madeleine.

Fortin Guy, Perron Jean, Mingione Guiseppe et Luliano Emiliano. CIRAAMIL ice accretion code improvement. Dans : 1st AIAA Atmospheric and Space Environments Conference , 22-25 June 2009, San Antonio, Texas.

Fortin Pascal E., Otis Martin J.-D., Duchaine Vincent et Cooperstock Jeremy R.. Event-based haptic vibration synthesis using a recursive filter for lower limb prosthetics. Dans : IEEE International Symposium on Haptic, Audio and Visual Environments and Games (HAVE) , 10-11 Oct. 2014, Richardson, TX.

Gagnon David, Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. Qualitative risk of falling assessment based on gait abnormalities. Dans : IEEE International Conference on Systems, Man, and Cybernetics , 13-16 Oct. 2013, Manchester, United Kingdom.

Gagnon David, Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. A serious game for the learning of vibrotactile feedbacks presented under the foot : how many and how fast? Dans : 4th International Conference on Serious Games Development and Applications SGDA 2013 - Serious Games Development and Applications , 25-27 Sep, 2013, Trondheim, Norway.

Gauthier-Turcotte Étienne, Ménard Sylvain, Fiset Mathieu et Chang Wen-Shao. (2021). Pull-out strength of glued-in steel rod perpendicular to the grain in spruce-pine glulam timber. Dans : World Conference on Timber Engineering 2021, WCTE 2021 , 9 August 2021 through 12 August 2021, Santiago.

Gillenwater Daniel, Masson Christian et Perron Jean. Wind turbine performance during icing events. Dans : 46th AIAA Aerospace Sciences Meeting & Exhibit , 7-10 January 2008, Reno, Nevada.

Girard Pierre-Luc, Marceau Daniel, Kocaefe Duygu, Bouazara Mohamed, Kallel Walid et Coulombe Patrick. Numerical investigation of the load free permanent strain in carbon anode during baking process. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Girard Sébastien, Guillot Michel, Fafard Mario, D'Amours Guillaume et Rahem Ahmed. (2010). Experimental exploration of the aluminum tube drawing process for producing variable wall thickness components used in light structural applications. Dans : SAE 2010 World Congress and Exhibition , 13 April 2010, Detroit, MI; United States.

Goulet Patrice, Laberge Carl, Lacroix René, Kiss László et Perron Jean. Modeling of the coke bed used in the electrical preheat of an aluminum reduction cell. Dans : Light Metals 2003: Proceedings of the technical sessions presented by the TMS Aluminium Committee at the 132nd TMS Annual Meetings , 2-6 March 2003, San Diego, CA.

Hadjadj Yazid, Ghunem Refat Atef et Fofana Issouf. (2021). Decomposition Kinetics of Natural Ester and Mineral oil from Thermogravimetric Analyses. Dans : 2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , December 12-15, 2021, Vancouver, BC, Canada.

Hermosilla-Lara Guillaume, Hassouni Khaled, Marty Philippe et Momen Gelareh. (2005). Experimental and numerical study of the hydrogen's storage by adsorption on activated carbon. Dans : IHEC International Hydrogen Energy Congress & Exhibition, 2005 , July, 13-15, 2005, Istambul, Turkey.

Heydarian Samaneh, Jafari Reza et Momen Gelareh. (2021). Fabrication of icephobic slippery surfaces bioinspired by Nepenth Pitcher Plant. Dans : 36th International Conference of the Polymer Processing Society , September 26-29, 2021, Montréal, Canada.

Hochart Clément, Fortin Guy, Perron Jean et Ilinca Adrian. Icing simulation of wind-turbine blades. Dans : 45th AIAA Aerospace Sciences Meeting and Exhibit , 8-11 January 2007, Reno, Nevada.

Huang Xianai, Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Morphological and microstructural characterization of bio-coke as potential anode raw material for aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Ibrahim Hussein, Dimitrova Mariya Hristova, Dutil Yvan, Rousse Daniel, Ilinca Adrian et Perron Jean. Wind-diesel hybrid system : energy storage system selection method. Dans : The 12th International Conference on Energy Storage - InnoStock 2012 , 16-18 May 2012, Espagne.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Feasibility study of a wind-diesel compressed air power plant. Dans : AWEA Windpower 2011 Conference & Exhibition , May 22-25 2011, Anaheim, CA.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Investigation of electricity production with a wind-diesel-compressed air energy storage system for Nordic remote villages. Dans : 2nd International Conference on Energy Conversion and Conservation - CICME'10 , April 22-25, 2010, Hammamet, Tunisia.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Optimisation de l'efficacité du moteur diesel pour un système hybride éolien-diesel : validation expérimentale. Dans : CSME FORUM 2010 - Proceedings of The Canadian Society for Mechanical Engineering Forum 2010 , June 7-9, 2010, Victoria, Colombie-britannique.

Ibrahim Hussein, Dimitrova Mariya Hristova, Ilinca Adrian et Perron Jean. Étude et conception d'un système hybride éolien-diesel-air comprimé pour l'électrification d'une station de télécommunications isolée. Dans : CanWEA 2010 Conference and Exhibition , 1-3 novembre, 2010, Montreal, Quebec.

Ibrahim Hussein, Dimitrova Mariya Hristova, Rousse Daniel, Ilinca Adrian et Perron Jean. Générateur éolien-diesel avec stockage d'énergie : critères de choix du système de stockage. Dans : Xe Colloque interuniversitaire franco-québécois sur la Thermique des systèmes , 20 au 22 juin 2011, Saguenay, Québec.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Comparison and analysis of different energy storage techniques based on their performance index. Dans : 2007 IEEE Canada Electrical Power Conference, EPC 2007 , 25-26 October 2007, Montreal, Quebec.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Integration of wind turbines with compressed air energy storage in remote area power supply system. Dans : European Wind Energy Conference & Exhibition 2012 (EWEC 2012) , 16-19 March 2012, Copenhagen, Denmark.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Investigation on the performances of energy storage techniques. Dans : 21st Canadian Congress of Applied Mechanics : proceedings, 21 CANCAM 2007, Department of Mechanical & Industrial Engineering , 2007, June 3-7, Ryerson University, Toronto, Ontario.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Solutions actuelles pour une meilleure gestion et intégration de la ressource éolienne. Dans : CSME/SCGM Forum 2008 - The Canadian society for mechanical engineering , 5-8 juin, 2008, Ottawa, Canada.

Ibrahim Hussein, Ilinca Adrian et Perron Jean. Systèmes de stockage de l'énergie pour les éoliennes = Wind turbine storage systems. Dans : Colloque international Énergie éolienne et sites éloignés , 19-21 octobre 2005, les de la Madeleine, Québec.

Ibrahim Hussein, Ilinca Adrian, Perron Jean et Merabet Adel. Modeling and simulation of a novel small-scale compressed air hybrid system for stand-alone off-grid applications. Dans : 2013 IEEE Electrical Power and Energy Conference, EPEC 2013 : Innovative Leadership for Renewable Energy , August 21-23, 2013, Marriott Harbourfront Hotel, Halifax, Nova Scotia.

Ibrahim Hussein, Ilinca Adrian, Rousse Daniel, Dutil Yvan et Perron Jean. Analyse des systèmes de génération d’électricité pour les sites isolés basés sur l’utilisation du stockage d’air comprimé en hybridation avec un jumelage éolien-diesel. Dans : CONFREGE 2012 - Conférence francophone sur l'éco-conception en génie électrique , 28-30 Mai 2012, Montréal, Québec.

Ibrahim Hussein, Ilinca Adrian, Younès Rafic, Perron Jean et Basbous Tammam. Study of a hybrid wind-diesel system with compressed air energy storage. Dans : IEEE Canada Electrical Power Conference, 2007 : EPC 2007 , 25 - 26 October 2007, Montreal, Quebec.

Ibrahim Hussein, Sing Ramdenee Drishty, Rousse Daniel, Ilinca Adrian, Dimitrova Mariya Hristova et Perron Jean. Générateur éolien-diesel avec stockage d'air comprimé : aspects thermiques. Dans : Xe Colloque interuniversitaire franco-québécois sur la Thermique des systèmes , 20 au 22 juin 2011, Saguenay, Québec.

Imbeault-Nepton Thomas et Otis Martin J.-D.. Synchronized walking cadence for TUG in perturbed environments : using Earcon or Tacton cues? Dans : 2014 IEEE International Symposium on Haptic, Audio and Visual Environments and Games (HAVE) , 10-11 Oct. 2014, Richardson, TX.

Jafari Reza, Chameau Marc, Farzaneh Masoud et Momen Gelareh. (2018). Superhydrophobic and highly oleophilic polystyrene fibers (PS) with delayed freezing time and effective oil adsorption.

Javidani Mousa, Fortier Martin et Colbert Josée. (2019). Impact of the main casting process parameters on floating crystals in Al alloy DC-Cast ingots. Dans : Light Metals 2019 TMS Annual Meeting & Exhibition , March 10-14, 2019, San Antonio, Texas.

Javidani Mousa, Larouche Daniel et Chen X-Grant. (2014). Evolution of intermetallic phases in multicomponent Al-Si foundry alloys containing different Cu, Mg and Fe content. Dans : 118th, One Hundred Eighteenth Annual Metalcasting Congress , April 8-11, 2014, Schaumburg, IL.

Jayasree T., Ungarala Mohan Rao, Fofana Issouf, Brettschneider Stephan, Rodriguez-Celis Esperanza M. et Picher Patrick. (2021). Influence of Aging on PD Characteristics of Ester Liquids with Hypothetical Plausibility. Dans : 22nd International Symposium on High Voltage Engineering (ISH) , 21-25 November 2021, Xi’an, China.

Kairous Djilali, Beaudoin Jean Jacques, Wamkeue René et Ouhrouche Mohand. (2015). Sliding mode control for voltage source converter applied to wind energy systems. Dans : 2014 International Conference on Renewable Energy Research and Application (ICRERA) , 19-22 October 2014, Milwaukee, WI, USA.

Kairous Djilali, Wamkeue René et Ouhrouche Mohand. (2015). Second order sliding-mode for direct power control of DFIG under distorted grid. Dans : 2015 IEEE International Conference on Smart Energy Grid Engineering (SEGE) , 17-19 August 2015, Oshawa, ON, Canada.

Kallel Walid, Marceau Daniel, Kocaefe Duygu, Girard Pierre-Luc, Racine Dany et Coulombe Patrick. Evolution of mechanical properties of carbon anodes during baking. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 3 - 6 October, 2016, Québec, Québec.

Kassi Koutoua Simon, Fofana Issouf, Farinas Marie-Isabelle et Volat Christophe. (2015). Aging effect on oil cooling capacity of a non-guided disc windings power transformer. Dans : 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 18-21 Oct. 2015, Ann Arbor, MI, USA.

Kassi Koutoua Simon, Fofana Issouf, Farinas Marie-Isabelle et Volat Christophe. (2016). Studying power transformers cooling effectiveness from computational fluid dynamics approach. Dans : 2016 IEEE Electrical Insulation Conference (EIC) , 19-22 June 2016, Montreal, QC, Canada.

Kassi Koutoua Simon, Fofana Issouf, Megnefhi Fethi, Bétié Amidou, Yéo Zié et Perron Jean. (2014). Comparative study between conventional and hybrid solid insulation systems. Dans : 2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2014 , 19-22 October 2014, Des Moines, IA.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. (2013). Comparison of weathering behavior of heat-treated jack pine during different artificial weathering conditions. Dans : 4th International Conference on Fluid Mechanics and Heat & Mass Transfer (FLUIDSHEAT'13) , June 25-27, 2013, Dubrovnik, Croatia.

Kocaefe Duygu, Huang Xianai et Kocaefe Yasar S.. Study on the surface changes of heat-treated aspen wood due to aging by different techniques. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Duygu, Huang Xianai, Kocaefe Yasar S. et Boluk Yaman. Study of weathering behavior of jack pine heat-treated under different conditions. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Kocaefe Yasar S. et Bhattacharyay Dipankar. Measurement of anode electrical resistivity for quality control in aluminium industry. Dans : 53rd annual Conference of Metallurgists , 28 September -1 October 2014, Vancouver, British Colombia.

Kocaefe Duygu, Kocaefe Yasar S. et Oumarou Noura. A novel high temperature heat treatment process for wood. Dans : 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 20-23 July 2015, South Africa.

Kocaefe Duygu, Saha Sudeshna, Kocaefe Yasar S., Krause Cornelia, Pichette André et Boluk Yaman. Effectiveness of bark extracts and CeO2 nano particles as coating additives for the protection of heat-treated jack pine. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Duygu, Sarkar Arunima, Lu Ying, Bhattacharyay Dipankar, Kocaefe Yasar S. et Morais Brigitte. Utilization of artificial neural network to analyze and predict the influence of different parameters on anode properties. Dans : 11th Australasian Aluminium Smelting Technology Conference , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Duygu, Younsi Ramdane, Poncsák Sándor et Kocaefe Yasar S.. Modelling of high temperature heat treatment of wood using thermowood technology. Dans : 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 19-21 July 2010, Antalya, Turkey.

Kocaefe Yasar S., Baiteche Mounir, Oumarou Noura, Kocaefe Duygu et Morais Brigitte. Different mathematical modelling approaches to predict the horizontal anode baking furnace performance. Dans : 11th Australasian Aluminium Smelting Technology , 6 - 11 December 2014, United Arab Emirates.

Kocaefe Yasar S., Kocaefe Duygu et Gauthier Bruno. Impact of the form of a trailer on its aerodynamic performance. Dans : 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 11 - 13 July 2016, Malaga, Spain.

Kocaefe Yasar S., Oumarou Noura et Kocaefe Duygu. Comparison of the 1D and 3D models for the simulation of wood heat treatment process. Dans : 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , 16 – 18 July 2012, Malta.

Kocaefe Yasar S., Simard G., Bui Rung-Tien, Charette André, Potocnik Vinko et Perron Jean. Analyzing the heat transfer in a coke calcining kiln. Dans : Light metals 1992 : proceedings of the technical sessions presented by the TMS Light Metals Committee at the 121st TMS annual meeting , March 1-5, 1992, San Diego, California.

Laforte Caroline, Blackburn Caroline et Perron Jean. A review of icephobic coating performances over the last decade. Dans : SAE Technical Paper Series - SAE 2015 International Conference on Icing of Aircraft, Engines, and Structures , June 22-25, 2015, Prague, Czech Republic.

Laforte Caroline, Blackburn Caroline, Perron Jean et Aubert Roger J.. (2014). Icephobic coating evaluation for aerospace applications. Dans : 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference , 13-17 January 2014, National Harbor, Maryland.

Lafrance Jean, Sawyer Edward W., Barnes Sarah-Jane et Severson Mark J.. Contamination of mafic magmas by crustal material in the layered-igneous Complex of Duluth, Minnesota. Dans : IGCP Project 427 - Abstracts from the 1999 field conference in Rouyn-Noranda on Ore Forming Processes in Dynamic Magmatic Systems , 15-17 July 1999, Rouyn-Noranda, QC.

Li Ping, Meziane Ramy, Otis Martin J.-D., Ezzaidi Hassan et Cardou Philippe. A Smart Safety Helmet using IMU and EEG sensors for analysis of worker’s fatigue. Dans : IEEE International Symposium on Robotic and Sensors Environments (ROSE) , 16-18 Oct 2014, Timisoara, Romania.

Loiselle Luc et Fofana Issouf. Influence de la qualité de l’huile isolante sur le refroidissement des transformateurs de puissance. Dans : Xe Colloque interuniversitaire Franco-québécois sur la thermique des systèmes , 20-22 juin 2011, Saguenay, Québec.

Loiselle Luc, Fofana Issouf et Hume D.. Influence of transformer oil decay products on its thermal conductivity. Dans : 31st International thermal conductivity conference (ITCC) and the 19th International thermal expansion symposium (ITES) , June 26-30, 2011, Chicoutimi, Québec.

Loiselle Luc, Fofana Issouf, Olivares-Galvan Juan Carlos et Campero E.. (2012). Stability of environmental friendly fluids under electrical and thermal stresses. Dans : Conference Record of the 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012) , 10-13 june 2012, San Juan, Puerto Rico.

Loiselle Luc, Fofana Issouf et Sabau J.. Influence of ageing by-products on the stability of some transformer fluids. Dans : 2012 CIGRÉ Canada conférence, Hilton Montréal Bonaventure , Septembre 24-26, 2012, Montréal, Québec.

Magdaleno-Adame Salvador, Olivares-Galvan Juan Carlos, Escarela-Perez R., Fofana Issouf, Loiselle Luc et Georgilakis P. S.. (2012). Study of parameters influencing the performance of connectors used for load and temperature tests on transformers. Dans : Conference Record of the 2012 IEEE International Symposium on Electrical Insulation (ISEI 2012) , 10-13 june 2012, San Juan, Puerto Rico.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured silicone rubber surfaces using compression molding.

Maghsoudi Khosrow, Momen Gelareh, Jafari Reza, Farzaneh Masoud et Carreira Tony. (2018). Micro-nanostructured silicone surfaces for highvoltage application. Dans : 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 21-24 Oct. 2018, Cancun, Mexico.

Maier Wolfgang D., Halkoaho Tapio, Huhma Hannu, Hanski Eero et Barnes Sarah-Jane. Petrogenesis of PGE reefs in the Penikat intrusion, Finland. Dans : 14th SGA Biennial Meeting - Mineral Resources to Discover , 20-23 aout 2017, Quebec, QC.

Maroufkhani Aida, Charpentier Claire, Morency François et Momen Gelareh. (2023). Effect of Variable Melting Temperature on the Enthalpy Model for Runway Deicing. Dans : SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE , 20 June 2023through 23 June 2023, Vienna.

Mayer Christine, Ilinca Adrian, Fortin Guy et Perron Jean. (2007). Wind tunnel study of the electro-thermal de-icing of wind turbine blades. Dans : Proceedings of the 17th International Offshore and Polar Engineering Conference (ISOPE) , July 1-6, 2007, Lisbon, Portugal.

Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. Design of a serious game for learning vibrotactile messages. Dans : IEEE International Workshop on Haptic Audio Visual Environments and Games (HAVE) , 8-9 Oct 2012, Munich, Germany.

Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. A serious game for training balance control over different types of soil. Dans : International Conference on Serious Games Development and Applications (SGDA) , September 26-29, 2012, Bremen, Germany.

Ménélas Bob-Antoine-Jerry et Otis Martin J.-D.. Use of foot for direct interactions with entities of a virtual environment displayed on a mobile device. Dans : IEEE International Conference on Systems, Man and Cybernetics - SMC , 13-16 Oct. 2013, Manchester, United Kingdom.

Meziane Ramy, Li Ping, Otis Martin J.-D., Ezzaidi Hassan et Cardou Philippe. Safer hybrid workspace using human-robot interaction while sharing production activities. Dans : 2014 IEEE International Symposium on Robotic and Sensors Environments (ROSE) , 16–18 October 2014, Timişoara, Romania.

Millet Guillaume, Otis Martin J.-D. et Cooperstock Jeremy R.. Vibration-induced friction control for walkway locomotion interface. Dans : 2013 IEEE International Conference on Systems, Man and Cybernetics - SMC , 13-16 Oct. 2013, Manchester, United Kingdom.

Momen Gelareh. (2021). Aqueous self-lubricating icephobic coatings inspired by ice skating. Dans : 36th International Conference of the Polymer Processing Society , September 26-29, 2021, Montréal, Canada.

Momen Gelareh, Allahdini Anahita et Jafari Reza. (2020). Self-healing coating for anti-icing application. Dans : Smart Coatings 2020 , February 26-28, 2020, Orlando, Florida, US.

Momen Gelareh, Allahdini Anihita et Jafari Reza. (2020). Development of icephobic PDMS coatings by a hybrid approach. Dans : Smart Coatings 2020 , February 26-28, 2020, Orlando, Florida, US.

Momen Gelareh, Farzaneh Masoud et Carreira Antony Jé. (2011). Icephobic and superhydrophobic silicone rubber coatings for outdoor insulators. Dans : IWAIS 2011 : the 14th International Workshop on Atmospheric Icing of Structures , May 8-13, 2011, Chongqing, China.

Momen Gelareh, Hermosilla-Lara Guillaume, Michau Armelle, Firdaous Mohamed, Leneindre Bertrand, Madec Laurent et Hassouni Khaled. (2005). Numerical simulation of hydrogen storage under high pressure in porous packed bed. Dans : IHEC International Hydrogen Energy Congress & Exhibition, 2005 , 2005, Istambul, Turkey.

Momen Gelareh et Jafari Reza. (2018). Ingénierie biomimétique pour développer des surfaces glaciophobes. Dans : 86e Congrès de l'ACFAS , 7-11 May 2018, Saguenay, Québec.

Momen Gelareh, Jafari Reza, Fofana Issouf et Carrière J.. (2019). Protective coatings to prevent ice build-up on steel port structures. Dans : International Congress on Industrial Port Research , May 27-31, 2019, Sept-Îles, Québec.

Momen Gelareh, Madidi Fatima Zahra et Farzaneh Masoud. (2012). A one-step process to fabricate superhydrophobic nanocomposite coating. Dans : 4th International Conference on Nanostructures ICNS4 , March 12th-14th, 2012, Kish Island, Iran.

N'cho Janvier Sylvestre, Loiselle Luc, Fofana Issouf, Beroual A. et Aka-Ngnui T.. Parameters affecting the electrical and thermal properties of transformer oils. Dans : 2010 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP , October 17-20 2010, West Lafayette, USA.

Ngueleu Armelle-Myriane, Batcho Charles Sebiyo et Otis Martin J.-D.. (2023). Comparison and validation of pressure and acceleration time-domain waveform models of a smart insole for accurate step count in healthy people. Dans : ICBRA '22: Proceedings of the 9th International Conference on Bioinformatics Research and Applications , Septembre 2022, Berlin Germany.

Nikzad Khangholi Siamak, Javidani Mousa, Maltais Alexandre et Chen X-Grant. (2020). Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels. Dans : The 17th International Conference on Aluminium Alloys 2020 (ICAA17) , October 26-29, 2020, Grenoble, France.

Otis Martin J.-D., Bernier R., Pasco Y., Ménard Hugues, Semmaoui Hicham, Jarry Martin et Fontaine R.. Development of an Hexapod BioMicroRobot with Nafion-Pt IPMC microlegs. Dans : Annual International Conference of the IEEE Engineering in Medicine and Biology Society , 17-21 Sept. 2003, Cancun, Mexico.

Otis Martin J.-D., Jarry Martin, Fontaine Réjean, Ménard Hugues et Masson Patrice. 3D Modelization of an hexapod BioMicroRobot propulsion system with IPMC actuators. Dans : 1st Annual IEEE Northeast Workshop on Circuits and Systems (NEWCAS '2003) , 17-20 June 2003, Montreal, Canada.

Otis Martin J.-D. et Ménélas Bob-Antoine-Jerry. Toward an augmented shoe for preventing falls related to physical conditions of the soil. Dans : IEEE International Conference on Systems, Man, and Cybernetics (SMC) , 14-17 Oct 2012, Seoul, Korea (South).

Otis Martin J.-D., Nguyen-Dang Thien-Ly, Laurendeau Denis et Gosselin Clément. Extremum seeking tuning for reel tension control in haptic application. Dans : 2nd Mediterranean Conference on Intelligent Systems and Automation Intelligent Systems and Automation (CISA’09) , 23–25 March 2009, Zarzis, Tunisia.

Otis Martin J.-D., Nguyen-Dang Thien-Ly, Laurendeau Denis et Gosselin Clément. Interference estimated time of arrival on a 6-DOF cable-driven haptic foot platform. Dans : IEEE International Conference on Robotics and Automation (ICRA) , 12-17 May 2009, Kobe, Japan.

Ouardirhi Anas, Labbé David, Otis Martin J.-D., Segning Collins et Ngomo Suzy. (2017). Une application de réalité augmentée pour évaluer la performance motrice et ajuster les paramètres de stimulation transcranienne chez les personnes atteintes de la fibromyalgie. Dans : 2e congrès québécois de recherche en adaptation-réadaptation, INTER-REPAR , 18 au 19 mai 2017, Montréal, Québec.

Oumarou Noura, Kocaefe Duygu, Kocaefe Yasar S., Morais Brigitte et Chabot Jérôme. A dynamic process model for simulating horizontal anode baking furnaces. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Perron Jean, Bouvette Jean-François et Dupuis Marc. Optimization of anthracite calcination process in a vertical electric arc furnace. Dans : Light Metals: Proceedings of Sessions, TMS Annual Meeting , 1996, Warrendale, Pennsylvania.

Perron Jean, Bui Rung-Tien, Charette André, Stevens W. et Dernedde E.. Computer simulation of an aluminum casting furnace. Dans : Light Metals, 1987: Proceedings of the Technical Sessions Sponsored by the TMS Light Metal Committee at the 116th Annual Meeting , February 24-26, 1987, Denver, Colorado.

Perron Jean, Castonguay Lise, Bui Rung-Tien et Nguyen H. T.. Optimization of coke calcining kiln operation using mathematical modelling. Dans : Light metals 1990 : proceedings of the technical sessions by the TMS Light Metals Committee at the 119 TMS annual meeting , February 18-22, 1990, Anaheim, California.

Perron Jean et Larocque Jacques. Alumina crystalliser mixing using CFD. Dans : Light Metals: Proceedings of Sessions, TMS Annual Meeting , 1994, Warrendale, Pennsylvania.

Perron Jean, Potocnik Vinko et Bui Rung-Tien. Modelling of the coke calcining kiln. Dans : CIM 1988 - 27th Annual conference of metallurgists : reduction and casting of aluminum Vol. 8 , August 28-31, 1988, Montréal, Canada.

Perron Jean, Proulx André L., Desgroseillers B. et Auger Marc. Petroleum coke calcination process improvement using a mathematical modelling tool and new kiln instrumentation. Dans : Proceedings of the technical sessions presented by TMS Light Metals committee at the 124th TMS Annual meeting , February 12-16, 1995, Las Vegas, Nevada.

Rebaïne Fatma, Bouazara Mohamed, Marceau Daniel, Kocaefe Duygu, Morais Brigitte et Lagacé Charles-Luc. Physical and mechanical characterizations of carbon anodes produced from different vibro-compactors. Dans : 52nd Annual Conference of Metallurgists , 27-31 October 2013, Montreal.

Rouget Geoffroy, Manolescu Petre, Picard Donald, Duchesne Carl, Alamdari Houshang et Kocaefe Duygu. Acoustic emission techniques to measure the properties of coke particles: a first foray. Dans : The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA) , 2 - 5 October, 2017, Hamburg, Germany.

Sarkar Arunima, Kocaefe Duygu, Kocaefe Yasar S., Bhattacharyay Dipankar, Morais Brigitte et Pouliot Martin. Characterization of petroleum coke and butts used in anode manufacturing in aluminum industry. Dans : Materials Science and Technology Conference and Exhibition , 27-31 October 2013, Montreal, Quebec.

Senoussaoui Mohammed El Amine, Fofana Issouf et Brahami Mostefa. (2021). Influence of Oil Quality on the Interpretation of Dissolved Gas Analysis Data. Dans : 2021 IEEE 5th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON) , 3-5 Dec. 2021, Kozhikode, India.

Shakeri H. R., Rahem Ahmed, Worswick M. J. et Mayer Robert. (2006). Failure mechanism and damage characterization in axially crushed AlMg3.5Mn aluminium tubes. Dans : The 45th International Conference of Metallurgists (COM 2006) , October 1-4, 2006, Montréal, Québec.

Sharma Teena, Chehri Abdellah et Fortier Paul. (2020). An efficient spectral/spatial OCDMA system using 2D BIBD code based on combinatorial constructions of galois field. Dans : 2020 IEEE 92nd Vehicular Technology Conference (VTC2020-Fall) , 18 Nov.-16 Dec. 2020, Victoria, BC, Canada.

Sharma Teena, Chehri Abdellah, Fortier Paul et Saadane Rachid. (2020). Backhaul networks and TV White Spaces (TVWS) with implementation challenges in 5G: A review. Dans : SCA 2020: Innovations in Smart Cities Applications : The Proceedings of the Third International Conference on Smart City Applications , 7-9 October 2020, Karabuk, Turkey.

Tameghe Theubou, Wamkeue René, Kamwa Innocent, Joos Geza et Ouhrouche Mohand. (2017). An enhanced current control scheme for microgrids supporting inverters applications. Dans : IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society , 29 October 2017 - 01 November 2017, Beijing, China.

Tameghe Tommy A. Theubou, Wamkeue René, Kamwa Innocent, Ouhrouche Mohand et Kandil Nahi. (2018). Online Grid Support Inverter Parameters Identification Using Extended Kalman Filters. Dans : IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society , 21-23 October 2018, Washington, DC, USA.

Tchakoua Takoutsing Pierre, Ouhrouche Mohand, Tameghe Tommy Andy, Ekemb Gabriel, Wamkeue René et Slaoui-Hasnaoui Fouad. (2015). Basis of theoretical formulations for new approach for modelling darrieus-type vertical axis wind turbine rotors using electrical equivalent circuit analogy. Dans : 2015 3rd International Renewable and Sustainable Energy Conference (IRSEC) , 10-13 December 2015, Marrakech, Morocco.

Tchakoua Takoutsing Pierre, Ouhrouche Mohand, Tameghe Tommy Andy, Ekemb Gabriel, Wamkeue René et Slaoui-Hasnaoui Fouad. (2015). Development of equivalent electric circuit model for darrieus-type vertical axis wind turbine rotor using mechanic - Electric analogy approach. Dans : 2015 3rd International Renewable and Sustainable Energy Conference (IRSEC) , 10-13 December 2015, Marrakech, Morocco.

Thota Jayasree, Ungarala Mohan Rao, Fofana Issouf, Picher Patrick et Brettschneider Stephan. (2022). Preliminary Investigations on the Gassing Tendency and Breakdown strength of Low Pourpoint Transformer Liquids under Selective Conditions. Dans : The 21st IEEE International Conference on Dielectric Liquids (ICDL 2022) , May 29 to June 2nd 2022, Sevilla (Spain).

Tremblay Marc Mario. (2010). 2010 Ballot Update of AS5901 B. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2010, Montréal, Québec.

Tremblay Marc Mario. (2017). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , 30 Octobre 2017, Montréal, Québec.

Tremblay Marc Mario. (2016). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , 31 octobre 2016, Montréal, Québec.

Tremblay Marc Mario. (2016). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2016, Savannah, GA.

Tremblay Marc Mario. (2015). Aerospace Standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , November 2015, Montréal, Québec.

Tremblay Marc Mario. (2007). AS5901 Proposed Revisions. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2007, San Diego, CA.

Tremblay Marc Mario. (2010). AS5901 revision B 2010 ballot. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2010, Berlin, Allemagne.

Tremblay Marc Mario. (2011). AS5901 standard 2010 ballot revision B last update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2011, San Francisco, CA.

Tremblay Marc Mario. (2009). AS5901 standard next revision. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2009, Charleston, South Carolina.

Tremblay Marc Mario. (2008). AS5901 standard next revision. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2008, Montréal, Québec.

Tremblay Marc Mario. (2013). AS5901 standard potential changes for revision C. Dans : SAE G-12 ADF Subcommittee Meeting , May 2013, New Orleans, Louisiana.

Tremblay Marc Mario. (2009). AS5901 standard revision B status. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2009, Montréal, Québec.

Tremblay Marc Mario. (2012). AS5901 standard revision C. Dans : SAE G-12 ADF Subcommittee Meeting , October 2012, Montréal, Québec.

Tremblay Marc Mario. (2011). AS5901 Standard Status. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2011, Montréal, Québec.

Tremblay Marc Mario. (2012). AS5901 standard status of next revision C. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2012, Prague, République tchèque.

Tremblay Marc Mario. (2008). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2008, Warsaw, Poland.

Tremblay Marc Mario. (2008). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2008, Montréal, Québec.

Tremblay Marc Mario. (2007). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2007, Montreal, Québec.

Tremblay Marc Mario. (2007). AS5901 standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , Novembre 2007, Montréal, Québec.

Tremblay Marc Mario. (2013). AS5901 standard update potential changes. Dans : SAE G-12 Fluids Subcommittee Meeting , October 2013, Montréal, Québec.

Tremblay Marc Mario. (2014). Ballot summary of AS5901C standard. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2014, Madrid, Spain.

Tremblay Marc Mario. (2015). Brief update of aerospace standard AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2015, Vancouver, BC.

Tremblay Marc Mario. (2017). Brief update of the aerospace document AS5901. Dans : SAE G-12 ADF Subcommittee Meeting , May 2017, Athens, Greece.

Tremblay Marc Mario. (2008). Testing of runway deicing fluids. Dans : SAE G-12 Fluids Subcommittee Meeting , May 14, 2008, Warsaw, Poland.

Tremblay Marc Mario. (2014). Update of AS5901C standard and publication. Dans : SAE G-12 Fluids Subcommittee Meeting , October 2014, Montréal, Québec.

Tremblay Marc Mario. (2014). Update of the Performance Test Methods for AMS1431/1435 Runway De/Anti-icing Chemicals. Dans : SAE G-12 RDF Subcommittee Meeting, May 2014 , Madrid, Spain.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2017). AIR performance test methods status of revision A, update of RDPWG works & the way forward. Dans : SAE G-12 RDF Subcommittee Meeting , May 2017, Athens, Greece.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2016). Update of 2016 ballots AIR performance test methods. Dans : SAE G-12 RDF Subcommittee Meeting , November 2016, Montréal, Québec.

Tremblay Marc Mario, Laforte Caroline, Westermaier Martin et Williamson Kelvin. (2015). Update of AIR performance test methods for AMS1431/AMS1435 runways and taxiways de/anti-icing chemicals. Dans : SAE G-12 RDF Subcommittee Meeting , November 2015, Montréal, Québec.

Ungarala Mohan Rao et Fofana Issouf. (2021). Monitoring the Sol and Gel in Natural Esters under Open Beaker Thermal Aging. Dans : 2021 IEEE 5th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON) , 3-5 Dec. 2021, Kozhikode, India.

Ungarala Mohan Rao, Fofana Issouf, Kartheek R., Yapi K. M. L. et Jaya T.. (2019). Mineral oil and ester based oil/paper insulation decaying assessment by FTIR measurements. Dans : ISH 2019: Proceedings of the 21st International Symposium on High Voltage Engineering , 26 au 30 août 2019, Budapest, Hongrie.

Ungarala Mohan Rao, Fofana Issouf et Loiselle Luc. (2019). Preliminary studies on soluble and colloidal decomposition products in ester filled transformers. Dans : 2019 IEEE 20th International Conference on Dielectric Liquids (ICDL) , 23-27 June 2019, Roma, Italy.

Vandewynckel Julien, Otis Martin J.-D., Bouchard Bruno et Ménélas Bob-Antoine-Jerry. Training adapted to Alzheimer patients for reducing daily activities errors and cognitive decline. Dans : 4th International Conference on Serious Games Development and Applications SGDA 2013 , 25-27 Sep, 2013, Trondheim, Norway.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Développement de surfaces superhydrophobes utilisant un jet de plasma à pression atmosphérique. Dans : 86e Congrès de l'ACFAS , 7-11 May 2018, Saguenay, Québec.

Vazirinasab Elham, Jafari Reza et Momen Gelareh. (2018). Wetting and self-cleaning properties of silicone rubber surfaces by atmospheric plasma jet. Dans : 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) , 21-24 Oct. 2018, Cancun, Mexico.

Vazirinasab Elham, Jafari Reza, Momen Gelareh et Carreira Tony. (2018). Simple fabrication of superhydrophobic surfaces using atmospheric-pressure plasma.

Verreault Antoine, Cicek Paul-Vahé et Robichaud Alexandre. (2023). A Lean Noise-Cancelling Sturdy MASH Delta-Sigma ADC with a Noise-Shaping SAR Stage. Dans : 2023 30th IEEE International Conference on Electronics, Circuits and Systems (ICECS) , 04-07 December 2023, Istanbul, Turkiye.

Verreault Antoine, Cicek Paul-Vahé et Robichaud Alexandre. (2024). A rail-to-rail low-power dynamic CMOS amplifier for switched-capacitor filters in high-performance ADC. Dans : 2024 IEEE 67th International Midwest Symposium on Circuits and Systems (MWSCAS) , 11-14 août 2024, Springfield, MA, États-Unis.

Verreault Antoine, Cicek Paul-Vahé et Robichaud Alexandre. (2022). A Surface-Micromachined Levitating MEMS Speaker. Dans : 2022 20th IEEE Interregional NEWCAS Conference (NEWCAS) , Quebec City, QC, Canada.

Villemure Félix-Antoine, Fiset Mathieu, Bastien Josée, Mitchell Denis et Fournier Benoît. (2015). Effet de la réaction alcalis-silice (RAS) sur l'adhérence des ancrages époxydiques de barres d'armature. Dans : 16e édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)2B , 9 au 10 juillet 2015, EPFL, Lausanne, Suisse.

Villemure Félix-Antoine, Fiset Mathieu, Bastien Josée, Mitchell Denis, Fournier Benoît et Bissonnette Benoît. (2016). Study of bond between epoxy, steel reinforcing bars and concrete affected by alkali-silica reaction. Dans : 15th International Conference on Alkali-Aggregate Reaction , July 03th - 07th, 2016, São Paulo, Brazil.

Villeneuve Éric. (2017). AS5900 Standard Update. Dans : SAE G12 Fluids Subcommittee Meeting , 2017, Montréal, Québec.

Villeneuve Éric. (2017). AS5900 Standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2017, Athens, Greece.

Villeneuve Éric. (2016). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2016, Montréal, Québec.

Villeneuve Éric. (2016). AS5900 Standard update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2016, Savannah, GA.

Villeneuve Éric. (2015). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , 2015, Montréal, Québec.

Villeneuve Éric. (2014). AS5900 Standard Update. Dans : SAE G-12 AWG Subcommittee Meeting , October 2014, Montréal, Québec.

Villeneuve Éric. (2014). AS5900 Standard Update. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2014, Madrid, Spain.

Villeneuve Éric. (2013). AS5900 standard update potential changes. Dans : SAE G-12 Fluids Subcommittee Meeting , 2013, Montréal, Québec.

Villeneuve Éric. (2013). Brief update of AS5900. Dans : SAE G-12 ADF Subcommittee Meeting , May 2013, New Orleans, Louisiana.

Villeneuve Éric. (2012). Short update of AS5900. Dans : SAE G-12 Fluids Subcommittee Meeting , May 2012, Prague, République Tchèque.

Villeneuve Éric, Harvey Derek, Aubert Roger J., Perron Jean et Zimcik David. Piezoelectric de-icing system for rotorcraft. Dans : 70th American Helicopter Society International annual forum 2014 , 20-22 May 2014, Montreal, Quebec.

Westermaier Martin, Williamson Kelvin et Tremblay Marc Mario. (2013). Performance test methods for AMS1431/1435 runway de/anti-icing chemicals. Dans : SAE G-12 RDF Subcommittee Meeting , October 2013, Montréal, Québec.

Wong David, Welch Barry, Nunez Pernelle, Dion Lukas et Spirin Alexey. (2019). Latest progress in IPCC methodology for estimating the extend of PFC greenhouse gases co-evolved in the aluminium reduction cells and challenges in reducing these emissions. Dans : 37th International Conference and Exhibition of ICSOBA , 16 to 20 September 2019, Krasnoyarsk, Russia.

Thèse ou mémoire d'autres institutions

Javidani Mousa. (2015). Effect of Cu, Mg and Fe on solidification processing and microstructure evolution of Al-7Si based foundry alloys. Thèse de doctorat, Université Laval.

Otis Martin J.-D.. (2009). Analyse, commande et intégration d'un mécanisme parallèle entraîné par des câbles pour la réalisation d'une interface haptique comme métaphore de navigation dans un environnement virtuel. Thèse de doctorat, Université Laval.

Rahem Ahmed. (2001). Analyse non linéaire en grandes rotations et grands déplacements des structures minces métalliques. Thèse de doctorat, Université Laval.

Essai, rapport de stage

Peyratout Jérémy. (2017). Conception, réalisation et mise en oeuvre d’un calcul de risque de chute en temps réel dans un micro-logiciel embarqué dans une semelle intelligente. Essai de maîtrise, Université du Québec à Chicoutimi.

Polesel Étienne. (2015). Étude de l’inclusion de la détection des activités humaines dans une cellule de travail hybride dédiée à la commande intelligente de robots via ROS en utilisant un réseau de capteurs portables sans fil. Rapport de stage ou d'intervention, UQAC.

Vaidis Maxime. (2017). Conception, réalisation et étude d'un esssaim de robots autonome protégeant un groupe de personnes munies de semelle intelligente. Essai de maîtrise, Université du Québec à Chicoutimi.

Brevet

Aubert Roger J., Truchon Martin, Sinusas Eric, Boussetoua Mohammed, Ouhrouche Mohand, Fortin Guy, Mercier Carol et Perron Jean. Electrical generator for rotating structure. .

Auger Marc, Baril Daniel, Parent Luc et Perron Jean. High temperature and abrasion resistant temperature measuring device. .

Bourgeois Thierry, Steward Nigel Ian, Huni Jean-Paul, Tremblay François et Perron Jean. Fluid bed system for cooling hot spent anode butts. .

Churchill Frederick, Perron Jean et Fortin Guy. Wind turbine apparatus = Dispositif pour éolienne. .

Kocaefe Duygu, Bhattacharyay Dipankar et Kocaefe Yasar S.. Method for analyzing an anode and device thereof. .

Perron Jean et Auger Marc. Process for controlling rotary calcining kilns and control system therefor. .

Perron Jean, Laforte Caroline, Quinlan Peter et Zimcik David. De-icing system and method = Procédé et système de dégivrage. .

Robichaud Alexandre, Cicek Paul-Vahé, Deslandes Dominic et Nabki Frederic. Electromechanically damped resonator devices and methods. .

Xie Yadian, Kocaefe Duygu et Liu Wei. Novel method for extracting ultra high purity alumina from wastewater. .